Picking switch

Similar Questions

• Switching between pages-processes do not pick up on changes in parameters

  Hello, new user, this is a different issue than before.
  
  I have a box of drop-down list on Page 1, on which the user can choose a number of study. The list box is named "P1_STUDY_NBR".
  
  Then I have a list, a single entry that goes to my form master / detail, which is Page 6. I would like him to go the number of study that the user choose on Page 1.
  
  In my goal on the list to create/edit entry, I put in the 'Page of this Application"," Page 6 ", then in any of these items, I put in."
  P6_STUDY_NBR
  
  My question is what to use with these values, where I want the content of the P1_STUDY_NBR. I tried:
  & P1_STUDY_NBR.
  
  Now I have to your master detail, but he spends all that was the first value! That is to say, if I put the default value from the drop-down list at 336-00 box, then it opens the form with 336-00, then if I set by default in the drop-down list to 005-07, 005-07 opening.
  
  However, if I change the value in the drop-down list box to something else, then press the link in the list to access the page, so it does not pass the new value as I want (she spends all that was the default).
  
  Is there something that accepts the new value in the variable to change in this drop-down list box that I need to add to my process, or why he uses the new value as a parameter?
  
  -Mary

  I recommend you (re) read "Understanding Page treatment" and Page Rendering in the User Guide and then redraw your page. The problem is that you change the selection of study number list in the browser, but the change never gets Treaty because a link from list of navigation is not submitting the form, he sailed alone away from him.

  You can try to make the list of numbers study of type 'Select list with redirection' which addresses the change so that the new value of selection gets the value in session state and then returned to the same page.

• Portege 4000: WIFI impossible to pick up in the Device Manager

  PLEASE COULD SOMEONE HELP ME WITH MY WIFI DEVICE. MY LAPTOP IT WILL NOT PICK UP
  IN THE MENU OF THE DEVICE. IVE UPDATED MY BIOS TO 2.10.AND STILL NO LUCK. IVE TRIED DOWNLOADING
  PILOTS AND VERIFIED THAT HIS FITTED CORRECTLY. ALSO THE ANTENNA LIGHT IS ORANGE WHEN ON.
  THANK U.

  Hello

  If the orange WiFi light is on it doesn't? t means that WLAN is enabled. If I remember correctly from your unit also has Bluetooth and using the FN F8 key combination, you can switch between WiFi and BT. Please check. It is possible that the wireless network card is disabled.

• I lost my iPhone 5 and the "Cell" switch is off. How can I turn on it from another phone?

  I lost my iPhone 5 and the "Cell" switch is off. How can I turn back on from another phone so I can activate "Find my phone"?

  You can not. There is no method to remote turn on/off all the settings on the phone. The only thing you can do is put it in mode lost through the computer and it remains to be seen if the device connects to a known Wi - Fi network. Otherwise, you'll just go out and pick up the old-fashioned way. You have it in Mode plane, or you just disable cellular data?

• Equium L10: How to configure the wireless card to pick up the router?

  Am wireless news and putting in place Broadband BT BT Voyager2091 router. Laptop wireless button in 'on', but is unable to connect or view available wireless networks. How to set up the portable integrated wireless card to pick up the router?

  Hello

  First of all, I hope that your camera comes with the wireless network card and the wireless network adapter is listed in the device under network adapters Manager.

  The card must be activated first with wireless switch that you can find on the front of your laptop near the lights on the system (right). When the adapter is enabled using FN F8 key combination to activate the card. When you use the FN keys in the middle of the screen, you will see a small window. When the FN button pressed constantly, whenever using the F8 key the different symbol will be chosen.

  Go to START > Control Panel > network connections. Click with the right button on wireless network connection and choose Properties. Chose the WIRELESS NETWORKS, tab and activate the option called use Windows to set up?

  At this point the available networks are listed. Select view wireless networks. If your WLAN is listed here you must configure the connection if the password is set.

  Try it!

• Best wireless network installation with the switch TP-Link

  Hi all

  Few question numpty maybe, but what follows... We just moved to a new (larger) home with thick walls and I want to set up a new wireless network.

  The current installation is:

  Fiber cable entering the House in the basement and connected the modem to the service provider that provides 150 mb internet. I changed the capacity wireless on the ISP's modem and connecting an airport extreme (2014 model) via the LAN to the modem. The extreme is in the office but on the 3rd floor is having connection problems than you can imagine. All rooms have access points CAT5e who all meet in the basement. I have two spare Aiport express and two Apple TV that I would use. Also I bought a TP-LINK 1000mbps (16 channels) Network Switch.

  Could someone please tell how the best set-up of my home network. For example, the Airport Express to the 3rd floor connected to the switch (wired) network or to an extreme in the Office? Apple TV also connected to the network switch?

  I would like to end up with a solid wireless network that passes without problem from extreme to Express necessary each time you walk and you want to use an Apple TV for television on the ground floor and one in our room.

  Many thanks and apologies once more for this very basic question... I have expanded my front (extreme Express) wireless network but just don't know how best to use the switch.

  Thank you

  The simplest up set... which is almost always the best game in place... would be to connect the switch 16 ports to the modem/router and then connect devices to the switch. In other words, if your modem/router has 16 + Ethernet ports, the simplest network configuration would be to plug as many devices as possible directly to the modem/router.

  Other variants are possible, for example, the network might look like this:

  Internet > Modem/Router > AirPort Extreme > switch > devices... or, you can connect certain devices to ports Ethernet on the AirPort Extreme and some to the ports on the switch.  One thing to keep in mind however... If there is a problem... Troubleshooting may not be easy since it will be difficult to know where the problem actually lies.  Much easier to all have, or of possible devices, connect to the switch.

  Unfortunately, the AirPort Express devices will be of real bottlenecks on your network.  These devices are notoriously slow as well as wireless, and even if they work well, the speed will be does not exceed 100 Mbps... since it's the speed of the port to the AirPort Express.  In fact, I expect each Express to provide a wireless signal in the range of 50-60 Mbps.

  Another thing to keep in mind of the wireless network is that Macs will usually a good work of tilting automatically to the point of wireless to the other as moving from one place to the other in the House... but the iPhones, iPads, PCs, and other mobile devices will do that very well... If they do at all.

  So with these devices, you will need to get used to temporarily disable the WiFi on the device and the device when you move in one region to the other, and then turn WiFi on must generally then pick up the signal from a nearby wireless access point.

• Why the Color Picker is a circle?

  Hello

  I have been using FCPX for a while and sometimes I need to use the color for a third-party effect selector, but instead of the usual pipette or magnifying glass icon, I get this big circle with a small rectangle at the Center.  It get bigger, but the circle is too much.  No idea what happened to the usual color picker?

  TIA,

  James

  The 'default' selector is a favorite of "color wheel" typical of most of the artists. It is indicative of the perceptual nature of color (red - orange - yellow - green - purple - blue - cyan - red.)

  The System color picker may be a circle of color wheel, sliders, 'tags' or tabs or color chart (However, you want to refer to them), spectrum and color pencils (48 colors). There are five small icons at the top of the switch. Choose the system that you want to use. If you select the selector of cursors, you will have the option of grayscale, RGB, CMYK and HSB. You can also 'load' the squares down with your "favourites".

  You may prefer the spectrum switch:

  

  You can also try right clicking on the color tab in the Inspector (or click on the arrow down on the right side) and you will get this compact popup:

  

  but there will be a pipette instead of the arrow cursor.

• Satellite L300 - 12L is not picking up wireless connection

  I just did a factory restore on a Satellite L300 - 12L sound do not pick up any wireless network.
  Do we know if its material missing?

  Thank you
  Them

  Hello!

  What do you mean with it s not to pick up any wireless connection?
  Can you wireless networks?

  Why wouldn't be a missing material? If your laptop is equipped with a WiFi card (I'm almost sure that this is the case) and you don t have exclamation points yellow in Device Manager that s is not a hardware problem.

  Don t forget WIFI must be enabled with the hardware switch on the computer laptop and FN + F8.

  Good bye

• Yoga 2 Pro - how to disable notifications from switch mode - for example mode "attempts", "tablet mode", etc.?

  Anyone know how to disable the notifications that appear in the upper right say you that you have just changed from one configuration to another - for example switch from the tent to the Tablet mode?

  It is not enough to uninstall the "Yoga Picks" modern application, you will need to uninstall the office by going to the desktop control panel > programs and features > uninstall a program > Yoga Picks > Uninstall.

• Software to switch between open windows on a necessary timer

  I need a software to switch between several windows open on a timer.  It will be used for a monitoring station in a manufacture of fixtures to leave the hands free, surveillance of several sets of information that are in different windows.  Anyone know where I can get such software or how even pick him up?  I search the web using 'scroll open windows' 'as alt + tab' 'timer switching window focus.

  Any help would be appreciated.

  Brian

  Hello

  Please use your favorite search engine to look for such software.

  THIRD WARNING:
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Color picker does not work in Windows media player 11

  color picker does not work. The frame color is red and there is no way to change.
  I tried with uninstall and re install, however the problem still exists.

  It seems that your WMP is in skin Mode. You can switch to full mode CTRL + 1 or Ctrl + M in WMP.

• I can't access my home screen and the fast user switching!

  I get an error message when I try to change the way I connect
  "client services for NetWare has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall the Client Services for NetWare. "
  What is NetWare? Where is he? I don't find it on my program list to remove it! Help!

  To resolve this issue, follow these steps. NOTE: If you rely on access to a Novell network and need the Client Service for Netware or the Novell Client, you cannot use the home screen or fast Windows XP user switching features.

  1. If you are using the Novell Client, see the following Web site for instructions on how to uninstall Novell support:
     http://support.Novell.com (http://support.novell.com/)
  2. If you are using the classic view in Control Panel, double-click network connections. If you are using the category view, click on network connections and Internetand then click on network connections.
  3. Right-click each connection that you have, and then click Properties each time.
  4. Under the tab general in each Local network connection, select the Client Service for Netware, and then click Uninstall.
  5. In the Dial-up connection properties dialog box, click the Networking tab, highlight the Client Service for Netwareand then click Uninstall.
  6. Restart the computer.
  7. Open Control Panel, and then double-click user accounts.
  8. Under pick a task..., click on change the way users log on or off the power.
  9. Click to select the opening and closing of session options you want: use of the Welcome screen or use quick user change.

• Prevent the display of switching when the laptop lid is closed?

  Hello

  I am looking for a way to prevent the display of switching when I close the lid of my laptop. On my old laptop, Windows XP, I could open the cover while watching a movie on a secondary antibody (TV) to display for example to check something on the web on the laptop screen - displays remained as they were. But under Vista, whenever I get close or open the cover, screen goes on television and laptop as a result and the whole process takes some time. This behavior remains the same even after the deactivation of TMM in Vista.
  Is there a solution to this problem?

  Thanks in advance.

  SOLUTION VERY SIMPLE:

  1. open Device Manager
  2. in "System devices" find "ACPI lid"
  3 open the properties for "ACPI lid" and go to the tab "driver".
  4. Select "Update driver".
  5. Select 'Browse my computer for driver software' and 'Let Me pick "...
  Uncheck the "Show compatible hardware".
  6 and now, 'Manufacturer' select "(Standard système truc) ' and model:"
  'Volume manager' (Yes, 'Manager of Volume')
  7. then, then restart the system and it works!

  ON WINDOWS 7 x 64

  (Post Found: http://forums.whirlpool.net.au/archive/1421975 )

• BEFSR41v2 hub switch

  I read a lot of posts online and think that I have figured this out, but I just want to know that. It seems that I am not not alone trying to do... I have a BEFSR41v2 and have since upgraded to a wireless router. Now, I need a hub and have read that I can disable DHCP in the BEFSR41 and use it as a hub. If I understand correctly what I read, I hang the cable from my current wireless router in the port of uplink on the BEFSR41 and then have correct 4 ports available for expansion without using the WAN port - making that noise? Also - is that what I should have the router (now configured as a hub) defined to obtain the IP address automatically, set a static IP address or what? Finally - the firmware is the original firmware 1.42.7 (April 2, 2002) and I've read where people have problems after the firmware update. Should I update the firmware? Thanks in advance for any help.

  In response to your questions:

  (1) the difference between a hub and a switch, it's when a hub receives a data stream, it broadcasts this stream to all the computers to which it is connected and the correct (receiving) computer realizes that the data are designed for it, so he picks up this flow, while other computers realize that the data stream is not for them While they ignore the flow.  A hub is limited to "a connection" at the same time.  A 10/100 hub would be a maximum bandwidth of 100 Mbps.

  A switch can make multiple connections at the same time, with all the ports running in both directions.  If a switch 8 ports can be up to 4 simultaneous connections to 100 Mbps in each direction, for a total bandwidth of 800 Mbps.  The key is that a switch can handle more traffic at the same time without having your data "bump heads", happening in your network.

  Because a switch costs only a few dollars more than a hub, I usually just buy switches.

  (2) when you use the Uplink port, you cannot also use port 1, because these two ports are directly connected.  The only difference between the Uplink port and port 1 is that two of the sons are reverse connected.   Port 1, 2, 3 and 4 normally communicate with each other through the firmware of the router (or switch), no direct wiring.  So normally the firmware controls the "switch" that is occurring.

  (3) you questions on a 'faster' switch    The data transfer speed is limited by the slowest links in any connection.   Note that a compressed high definition signal (the signal recorded by DVR) TV is probably only 6 Mbps or less.  If your DVR probably only has a port 10/100 on it.    If your DVR has a gigabit port to this topic, then you can consider a gigabit switch, but otherwise stay with a 10/100 switch.  The only time where a gigabit switch is beneficial, it is when two computers (or other devices) that are connected to the it are the sharing of data, and both devices can process data at speeds more than 100 Mbps.

  (4) if the SD208 a lack of ports, you must consider the SD216 (16 ports), or cascading two switches SD208, or a SD208 more the BEFSR41 (converted to a switch).  Yes, you can mount two switches cascaded in a row.

  (5) all your ethernet cables should be standard (straight through) cables.  All routers and the modern switches have ports "auto detection", meaning that they automatically cross the cable necessary for the system to work, so ADJUSTABLE uplink ports, and cables are no longer necessary.  This is why the switches, such as the SD208, do not have an Uplink port.

  (6) the switches I talked of should work with your Netgear router.

• WRT600N advanced routing problems / use as Access Point and switch

  Firmware 1.01.36 build 4 The WRT600N is connected to an existing LAN and is really only used as a Wireless N access point. There is nothing plugged into the WAN port; only the LAN port. I have NAT disabled. All traffic from a client connected to the WRT600N wireless going very well for the gateway and the Internet router. The customer experience is very good. However, there are a few minor issues as follows.

  1] Setup > Advanced Routing tab has only the following options; to do this, * not * have a picker 'Mode '. NAT, static routing and dynamic routing (RIP).    IS this NORMAL, OR should HAVE a MODE (e.g. switch) AS REFERRED to IN THE HELP FILES?

  [2] even if a connection wireless or wired to the WRT600N works very well, the WRT600N himself is unable to connect to the internet. It cannot connect to NTP to set the time and I can't ping past the gateway router using the ping of the WRT600N diagnostic utility. I ping the gateway 192.168.1.4 port inside, but I can't use the diagnostic the WRT600N ping ping utility something beyond this gateway port. The routing of the WRT600N table is below. THE GATEWAY SHOULD NOT BE 192/168.1.4? HOWEVER THE WRT600N DON'T ME LETS NOT CHANGE IT.

  Destination LAN IP Subnet Mask gateway interface

  192.168.1.0 255.255.255.0 192.168.1.71 LAN & Wireless

  127.0.0.0 255.0.0.0 * LAN & Wireless

  Topic 1. Linksys, used to have a mode option to switch between the modes 'Bridge' and 'router '. The latest routers call it now better NAT power. Gateway mode means THAT NAT is enabled. Router mode means THAT NAT is disabled. The help files are probably a little bit over. But the option is still the same.

  Re 2. It's normal if you use it as only access point (i.e. do not use the WAN port). The router always takes into account that the internet connection via the WAN port, i.e. it will always use the default gateway on the WAN port. If nothing is connected to the WAN port on the router itself has no default gateway and therefore has no access to the internet. Generally, you are not able to establish the default route in either advanced routing page. It is a known limit of these routers if you do not use as a router.