Pilot BACK to map an ESS Maestro2e (ES1978)
I need a driver BACK to an 'old' game for Win95 (in fact the 16-bit DOS environment). Technically I tried many possible solutions because I'm quite advanced in the technology of the OS. I also spend hours to surf the web, trying to find a driver for the Maestro2E ES1978 BACK, but I could only find messages of other people having exactly the same problem as me, trying to find a driver BACK too. Better in this case would be to use a bootdisk BACK as comptibility (DOS window) of Windows XP mode is not stable in this case. I tried drivers like aecu.sys essolo.sys and mastro.com or essolo.com for instance in config.sys or autoexec.bat breast, but again the game cannot recognize the card but it if it's at the least sound compatible Blaster (which should be the case).
Any complex same solution would be much appreciated.
Thank you very much in advance for any help
Hello
Unfortunately has no solution to your problem. I found a page ith drivers for your sound card. You can check it out on http://www.driver-downloads.com/computer-manufacturer-e.htm.
Good luck!
Tags: Toshiba
Similar Questions
-
Restoration of lost data on an old Palm Pilot?
Restoration of lost data on an old Palm Pilot? My Palm Pilot erased when I don't keep not loaded. I backed up more data on my desktop, but I don't know how to get saved, transferred data to my Palm Pilot. How can I get the Palm Pilot back up and running?
How do backup you the data? Palm OS devices come with disks that contain Palm Desktop. To back up your data, you perform a HotSync operation on your computer.
To restore data, do the same thing! If your device is really empty, Palm Desktop will recognize as such and it will ask you, "create a new account or use an existing one? Choose existing, and choose your original account name Hotsync.
If you saved it another way, then I can't help you without details.
WyreNut
-
SM Bus controller and 2 USB controller drivers, IMPOSSIBLE to FIND ANYWHERE! Dv6 1149wm
Hello and thank you for reading, I reformatted recently my HP DV6 1149WM with windows 7, which is come with, I just needed a new facility.
But after getting all the software I wanted and pilots back on this subject that I noticed that two of my usb ports are not working, and two others say they aren't 3.0 which I may be wrong but I'm pretty sure they are. So Ive looked everywhere, people say usb drivers come with the AMD Chipset drivers, someone had my computer and my same problem and he said AMD drivers solved his problem, but it did not work for me, here's the source:
"For some reason, HP does not only provide the driver of portable computers for all its AMD based AMD chipset on any page of support and driver."
You must install the amd chipset driver from the link below, the first file listed. Who will install the drivers for SM Bus and USB 3.0.
http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2 ".
However when I click the link need me somewhere else where AMD wants me to fill my specs pc or automatic detection. giving my good drivers but does not solve is not my USB problem.
That's what my said Dev Manager has no drivers.
SM Bus controller
(USB) Universal Serial Bus controller
(USB) Universal Serial Bus controller
Heres the Hardware ID
SM Bus controller
PCI\VEN_1022 & DEV_780B & SUBSYS_358B103C & REV_13
PCI\VEN_1022 & DEV_780B & SUBSYS_358B103C
PCI\VEN_1022 & DEV_780B & CC_0C0500
PCI\VEN_1022 & DEV_780B & CC_0C05USB controllers
PCI\VEN_1022 & DEV_7812 & SUBSYS_358B103C & REV_03
PCI\VEN_1022 & DEV_7812 & SUBSYS_358B103C
PCI\VEN_1022 & DEV_7812 & CC_0C0330
PCI\VEN_1022 & DEV_7812 & CC_0C03HP Pavilion DV6 1149wm
More system informationName of the operating system Microsoft Windows 7 Home Premium
Version 6.1.7601 Service Pack 1 Build 7601
Another Description of the OS is not available
Manufacturer of operating system Microsoft Corporation
System name ANONYMOUS-PC
System manufacturer Hewlett-Packard
HP Pavilion dv6 Notebook PC model system
System Type x 64-based PC
Processor AMD A6 - 3400M APU with 4 logical processors, 4 Lossnay, 1400 Mhz, graphics HD Radeon (TM)
Hewlett-Packard Version / Date BIOS F.21, 13/09/2011
SMBIOS Version 2.7
Windows directory C:\Windows
System directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
The local United States
Hardware Abstraction Layer Version = "6.1.7601.17514".
Physical memory (RAM) installed 4.00 GB
3.48 GB total physical memory
1.90 GB available physical memory
6.96 GB total virtual memory
4.95 GB available virtual memory
Page file space 3.48 GB
Paging file C:\pagefile.sysDisplay map AMD Radeon HD 6520
Please let me know if I forgot any info.
Once again
Thanks for reading!
Hello:
Here is the link for the driver, you need to install the smbus and usb 3 controllers.
You want the first file on the Web page.
http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64
-
Servers on C210 M2 all becomes inaccessible
We have 2 servers UCS C210 M2 in 2 different places. In the 2 months, they each had the servers configured on them stops responding (including ESXi host) and we are forced to restart the MMIC so that servers back online. Initially the TAC tells us it was due to this bug: https://tools.cisco.com/bugsearch/bug/CSCtw68712
We installed the update of firmware for each system and they were quiet for a month. Last Friday, one of the servers has shown the same behavior and we were forced to reboot again. TAC now tells us that the problem is due to a combination of the battery from the RAID controller that needs to be replaced, the firmware ESXi that need to be updated (Version 00.00.04.14.18 - 1vmw, version: 348481, must be 00.00.05.33) and that the pilot of the MAP must be updated (version: 2.0.7d - 3vmw, should be 2.2.1i.v41.1.)
Has anyone meet a similar problem? Have you noticed anything that has helped solve your problem?
If she says that it was fixed at 1.43 (c), I remember having the same problem that release as well.
the key is to disable the interrupt remapping first to WOOD - restart
then also disable it in the esxi - restart.
If you did that?
also, I suggest upgrading to 1.43u or v. 1.4 (3 c) is not yet in the list of the firmware to download on the cisco Web site. either its been delayed or cisco do not want us to use it.
Thank you
Vijay
-
Boot Camp 6 - Windows 10 drivers
I have currently a workspace Windows 10 bootable on an external hard drive that I have plug into my 2015 retina MacBook Pro. It works with my Mac because of the many Boot Camp drivers I had installed there. However, an attempt to get scroll work on my magic mouse (the only thing that does not work, oddly enough), I accidentally deleted a couple of drivers who make a programme of work that will give my scrolling the mouse capabilities. I also accidentally deleted some audio drivers, so now there is no sound. I thought I could get just the Boot Camp 6 I had and charge on that these pilots back, but unfortunately, I seem to have lost this file too! I scoured the Internet, but to no avail. Simply, I can't find a download for the drivers of Boot Camp 6.
A little help, please?
Yes, you can download the drivers using the wizard of BC. (Older versions of Mac OS X also have equivalent facilities).
-
Install XP on ct3480 with 32-bit cardbus Toshiba PX1054E-1NST
I need to install xp on my ct3480, I have a usb floppy and the chance to buy a Toshiba PX1054E-1NST cdrw.
My question is is it work/better way to do it, as the 32-bit pcmcia card.
I read that it should be 16 bit for pilots back to work, but the Toshiba PX1054E-1NST is designed for the p2000 and toshiba have a 'special boot disc"to activate the p2000 work with the card provided 32-bit in the p2000 bios normally only works with 16-bit cards.Does anyone know what brand/model of CD - RW drive is a Toshiba PX1054E-1NST?
Thank you.
The PX1054E-1NST made by Freecom (plu Traveller model).
Good bye
-
Reinstalling OS the Portege 2000 with IDE CD-ROMs
Hello
Recently, I got my father a Portege 2000 (purchased at the Japan if it makes a difference) on which I am trying to reinstall Win XP from the provided recovery CD (there are 3 CD containing Windows XP Pro and Win 2000).
"I'm doing it with a USB FDD and Sony CRX75A CD-Rom PCMCIA that connects to the computer via a different manufacture PC Card ACR - A01 switchable between 16-bit and CardBus mode.)
As I'm not very familiar with BACK, CardBus and start-up stuff, I read a lot of topics and found the following application, BootdiskP2000.EXE that contains drivers for PCMCIA and USB Toshiba CD-ROM cards. Then I ran and when the choice of CD PCMCIA external drive in the menu, I got the following:
PC Card driver for external Rev:2203 of the ATAPI-IDE drives
PCCARD found: IO DATA CBIDE2 V4.1
ERROR: There is no PCCARD in socket A and B!
PCCARD not initialized!So I searched the web for pilots BACK my ACR - A01 and found DUAOTA16. SYS and DUOATACD. SYS. Then, I changed my CONFIG. SYS (even when perhaps not properly as I'm not comfortable with it) by the addition of a menuitem and further:
[SONY]
DEVICE = A:\DUOATA16. SYS
DEVICE = A:\DUOATACD. SYS D:TOSCD001
When it works, I get the following:
DuoATA16 CS Client Driver Version 1.01
Copyright...
CBIDE2: Not found CardServices.
Driver is not installed.
DuoATACD CD-ROM Driver Version 1.06
Copyright...
IDECD: No CBIDE2 card configuration.
CD drive is not installed.If having a glance at HISTORY. TXT file from the startup disk, at the end it says: "If you use it with other CD-ROM, you must modify/change normally the driver CD-ROM (for example Toscdrom.sys - file!). and the driver, on which you have access to the card PCMCIA (Fcatapi.sys and FCPoint.exe). "but I have no idea with what I would have to replace it.
Last point, my BIOS settings on page 2 are: device Config. = all devices that allows me to set the PC CARD controller Mode = CardBus/16-bit and by the way the CD manufacturing onther used to work fine with the Portege but with a Win XP driver.
Someone has an idea of what's going on here, because I'm confused. Thank you very much!!!
PS I also tried to boot using PXE - LAN to a PC running Win Server 2003 but that doesn't work either, but I'm going to start a new topic for it.
And why Don t you try maybe a USB-DVD-ROM? A USB key will be recognized for sure. I installed a XP Pro with a USB-DVD-ROM on my Portege R200.
Welcome them
-
Improve the performance of the Satellite L300 graphics software and games-Vista
After the first post on how I was disappointed with Toshiba L300, I found a solution for his performance on the use of software such as Photoshop, Corel and games like Warcraft III, NFS Pro Street, Titan Quest, Devil May Cry and so on. This tweak was found on another forum and was modded with the new driver of Intel and Toshiba L300.
I would like to share with you all so that you can be happier with your product. This can be applied to other * X 3100 * computers:
* Steps: *.
1. download the latest driver from Intel (at the moment it is 15, 9 - 7.14.10.1472 at the link: [http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=2800&OS FullName = Windows Vista + * + 32 & lang = eng & strOSs = 164 & sub mit = GB 21%])
2 extract the file somewhere on your hard drive.
3 install the driver manually from the Device Manager (we can not update automatically as there are problems between the pilot back to Toshiba and this)
4 Download this registry key to link: [http://www.mediafire.com/?4cejjqbmlm5] on your hard drive
5. open this file with * Notepad *.
6. research * game1.exe*
7. you will see 4 lines, that I created. Replace the two * game1.exe* by the name of the Executive program, you want to give
-For example: I want to improve performance for WarcraftIII, replace * game1.exe* by * warcraftIII.exe*8. add more software that require high graphics performance by adding a line more with * "_software.exe" = dword:00000001 * and * "~software.exe"=dword:00000001*
9. save the file and apply the registry key by double-clicking on it. (Right of the administrator is required)
9 turn on the software, and you will see that it will work better than before.
I na? don't know if this has been posted here or not but hope that it is useful for the x 3100 and Vista users
I'm happy to answer any questions. If you find the best methods, please share.
Best wishes.
Hi Luong Phan
Thanks a lot for this useful and very interesting statement.
To be honest it s a first time I read something like that ;)Anyway, thanks again for sharing this with us and I'm sure it could be useful for other Members here in the forum.
Greetings
-
I have a HP Touchsmart 25.5 "IQ846 who has no display purchased Sept 2009. Computer worked fine then one day, no display. When I turn on the computer, I can hear the music from windows 7, but my screen is empty. I cannot remote desktop and I can see my desktop icons. I tried recommended HP's F5/F10 to reset the bios, nothing, I stepped back as map video, such as recommended. When I called back today, they proposed another procedure where I plug in the power, wait a minute, unplug then press and hold the power button for 15 seconds. They also suggested to turn on the computer, take a flashlight and look at the screen on an angle, though I can see my desktop icons that they feel that the backlight is gone, if I don't see anything that's probably my motherboard.
Anyone out there have similar problem, we paid a lot of money $1999,00 for this computer and isn't happy he does not work after so little time...
HP sent me a box to ship my touchsmart to them for repair, they feel that it is a video card or the backlight. My $100,00 repair cost which is excellent.
-
Order of movement OR 73xx, maximum speed
Hello!
Last time I was testing a new engine controller not. I discovered that when I put the gear 2000steps/s, the speed increases no more than 1968steps/s. I tried to put many configurations, but they do not work properly. I have to do some tests with a much higher speed than 2000steps/s... Could you tell me what I did wrong?
Simple program was created in Labview 2011
Vision and movement of pilots-> NIMotion830
Map of NOR -> NOR-7334
Universal movement - UMI-7764 interface
Windows XP
I tried to affect the speed of the motor in open loop stepper.
Thanks in advance
Kind regards
Mariusz
I found the solution.
The problem was too small value of acceleration/deceleration. If the program realizes that speed rise time will be longer than 8, 196ms, it will stop increasing the speed lower than the requested value. I have no idea why, but perhaps it is caused by an internal counter that handles speeds method.
After I increased the value of the block of accel/break, exit to step easily reached a desired frequency.
I close the topic.
-
SM Bus controller and 2 missing USB controller drivers
Hello and thanks for reading, I recently reformatted my laptop HP Pavilion dv7-6113 cl with windows 7, which is it came with, I just a new set.
But after getting all the software I wanted and pilots back on this subject that I noticed that two of my USB ports are not working, and two others say they don't 3.0 which I may be wrong, but I'm sure they are. I've looked everywhere, people say USB drivers are delivered with Chipset AMD drivers, any other with the same problem but different HP laptop has posted on this forum and others that drivers AMD fixed his problem, but he has not worked for me, here the source:
"For some reason, HP does not only provide the driver of portable computers for all its AMD based AMD chipset on any page of support and driver."
You must install the amd chipset driver from the link below, the first file listed. Who will install the drivers for SM Bus and USB 3.0.
http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2 ".
However when I click the link need me somewhere else where AMD wants me to fill my specs pc or automatic detection. that gives me drivers, but does not solve my problem of USB. He also says: "your system does not support these drivers.
That's what my said Dev Manager has no drivers.
SM Bus controller
(USB) Universal Serial Bus controller
(USB) Universal Serial Bus controller
In "Information systems" in the topic "Peripheral issue" here is what is stated.
SM Bus controller
PCI\VEN_1022 & DEV_780B & SUBSYS_3591103C & REV_13\3 & 2411E6FE & 2 & A0
The drivers for this device are not installed.
Universal Serial Bus (USB) ControllerPCI\VEN_1022 & DEV_7812 & SUBSYS_3591103C & REV_03\3 & 2411E6FE & 2 & 80
The drivers for this device are not installed.
(USB) Universal Serial Bus controller
PCI\VEN_1022 & DEV_7812 & SUBSYS_3591103C & REV_03\3 & 2411E6FE & 2 & 81
The drivers for this device are not installed.
Here is my system info
Name of the operating system Microsoft Windows 7 Home Premium
Version 6.1.7601 Service Pack 1 Build 7601
Another Description of the OS is not available
Manufacturer of operating system Microsoft Corporation
System name ANONYMOUS-PC
System manufacturer Hewlett-Packard
System model HP Pavilion dv7 Notebook PC
System Type x 64-based PC
Processor AMD A6 - 3400M APU with 4 logical processors, 4 Lossnay, 1400 Mhz, graphics HD Radeon (TM)
Hewlett-Packard Version / Date BIOS F.21, 13/09/2011
SMBIOS Version 2.7
Windows directory C:\Windows
System directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
The local United States
Hardware Abstraction Layer Version = "6.1.7601.17514".
Physical memory (RAM) installed 8.00 GB
7,48 GB total physical memory
5.34 GB available physical memory
15.0 GB total virtual memory
12.4 GB available virtual memory
Page file space 7.48 GB
Paging file C:\pagefile.sys
HP Pavilion dv7 - 6113cl Entertainment Notebook PC
Serial number: 5CH1350U9U
Product number: QE360UAAll suggestions greatly appreciated.
Thank you
The specifications of your HP Pavilion laptop dv7-6113 cl Entertainment, clearly indicate that this model has 2 x USB 3.0 SuperSpeed in most 2 ports-port Universal Serial Bus (USB) 2.0. Please try the AMD Chipset Drivers (Chipset, USB 3.0, SATA/RAID). or looking for HP SP61462.exe
If you have any other questions, feel free to ask.
Please click the 'Thumbs Up' white LAURELS to show your appreciation
-
Laptop will not recognize Sony Cybershot camera more
I have a Sony CyberShot digital camera. I had been able to plug and play my front camera. Now, nothing happens when I plug the USB cable in my laptop that is running Windows Vista. I managed to plug it into another laptop and it recognizes the camera and allowed me to download the photos. How can I get pilots back on my laptop for Windows Vista to be able to upload my pictures?
I suggest you just go here:
http://support.Sony-Europe.com/dime/digistill/index.aspx?site=odw_en_GB
and go through the troubleshooting of your Cybershot camera connectivity section.
All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.
-
My Fn key and F10 and F11 keys is no longer the brightness of my screen
I the IQ816 [vista] and now will not fit using the method in my title for this post... I think this started since I was the last update that was 'Display-NVidia-NVIDIA GeForce 9600 M GS' which was released on September 2, 2010... the update came from Microsoft updates... I'm almost certain that it is the source of the problem... I tried the display settings in the setting of the power of the Panel and went to the high preformance setting it and also to advance settings and then display and turned on Adaptive display and also the display settings set to 50% to see if he would do anything, but still no change... I hope I described it enough for you all.
I could not uninstall the NVIDIA Microsoft's update, I'm so returned to the pilot back and who sets them all have works.
-
Drivers for my 4540 s HP's ProBook
Hello
I'm having a 4540 of HP ProBook installed with windows 8.1 Professional.
Miss me 3 following pilots with the hardware ID:
Base system device:
PCI\VEN_197B & DEV_2393 & SUBSYS_17F6103C & REV_30
Base system device:
PCI\VEN_197B & DEV_2392 & SUBSYS_17F6103C & REV_30
unknown device:
ACPI\VEN_HPQ & DEV_6001
can you send me the download links?
Thank you!
Hello
2 first hardware IDS are for the pilot to drive map on the link below.
The other is for the driver of button wireless on the following link.
Kind regards
DP - K
-
PAGE_FAULT_IN_NONPAGED_AREA win10 + torrenting
I searched the problem in the internet. It seems that the problem is the last driver from 1704 wireless wifi. How can I solve this problem?
Or where can I get an older version of the driver that is compatible with win10?
Hello
You can go to our support site, enter your service tag and the site will redirect you to the support pages for your Vostro 3560. It seems like there is only one pilot for the map of DW 1704, at least for Windows 10. Once you are on the pages for the Vostro 3560, click the drivers & downloads, then the filter for 8.1 of Windows, and you can find previous versions of the drivers for the Dell DW1704 wireless card.
I hope this helps. If you have additional questions to help to me in troubleshooting, please click on my user name of Dell and send me a message with your number of Dell Service.
Todd
Maybe you are looking for
-
I recently bought him lose it app and it's not what I thought it would be. It is $ 39.99 for a year. I got maybe 1 week. How to get a refund and remove the app?
-
How to change the location of the profile for all NEW profiles created it
I am aware of the Manager profile, and other ways to move an existing profile. I'm looking for, it's something different. Is it possible to change Firefox so that all the * newly * profiles created in a different location. I don't want to use the App
-
Looking around it seems all Sony phones I see is a Micro-Sim, is it the same with the Z3? I'm going to need to get a new sim card ordered anyway, I always use the same as that of a decade ago (and I move to another service), I just want to check and
-
BlackBerry Q10 Q10 - there is a voice and my touch screen no longer works
My touch screen of my phone stopped being reactive, however, I noticed that there is now a voice that says everything I press, although the phone will not take me in this application, that is, if I type contacts, it says contacts and still stay on th
-
I've lost my Windows 7 Admin pass and...
This morning I changed my pass, but I forgot. I've been trying and trying, but I can't get anything to work. Anything downloads requiring a CD will not work because my disk driver is broken. I tried to do it with a USB port, but it did not work.