Error compiling 2010 FPGA - TclTasklC:project_028: unknown property value

Similar Questions

• Name of variable or unknown property 'ReportFilePath '. Error in article "Runstate.Root.Locals.ReportFilePath". in TestStand

  Hi all.

  I used Teststand 4.2 until last week and set to level to 2013 TS. 4.2 I used the following to get the location of the teststand report:

  Runstate.Root.Locals.ReportFilePath

  
  but with TS 2013 this no longer works... is the following error message:

  Name of variable or unknown property 'ReportFilePath '.
  Error in article "Runstate.Root.Locals.ReportFilePath". in TestStand - get property .vi (String) value->

  I tried the following now with no success:

  RunState.Root.Report.Location

   

  So my question is how can we get the location (path) of the report during the test by program file please?

  Please find attached a copy of the report configuration screen:

  Hi Herb,

  By default, the path expression is evaluated once at the beginning.  However, there are 2 ways to force another assessment at the end:

  1. include the macro in your expression of path of the report.  This macro can only be evaluated once the executing State is known
  
  
  2. In the sequence to calculate the report of the NI_ReportGenerator.seq plugin path, set Parameters.ReportOptions.NewFileNameForEachUUTStatus to true before the first, if the statement is evaluated.  This replaces the UUTStatus macro check and force the revaluation.

  You might also be interested in this idea exchange post associated with this request:

  http://forums.NI.com/T5/NI-TestStand-idea-exchange/add-option-to-force-the-report-file-path-expressi...

  Let me know if it works for you!

• Internal error OR-farm - impossible to compile the FPGA VI

  Hello!

  When I try to compile any FPGA VI with LabVIEW2013 or 2012 SP1, I get the following error:

  "Year error occurred trying to connect to this server compilation."

  Details:

  Internal error OR the farm: Client Server received unexpected or bad data. »

  Intermediate files are not generated, the error message appears immediately after I have select build of build specification or I click the run arrow.

  I use the local server for compilation.

  The equipment I use: CompactRIO Evaluation Board - SbRIO9636, DELL laptop, Intel core2 Duo T5800, 2 GHz, 3 GB RAM, Windows 7 Ultimate 64-bit, SP1.

  The intermediate files CAN be generated without any problems if I select in the menu. If I run the FPGA application compile worker, a ToolTip message specifying that "FPGA compile runs", but after a few seconds, another message appears: newspaper several attempts were unsuccessful - please see attached images.

  At first, I thought that my firewall (Comodo 6.3) is the reason for this, so I disabled it but nothing changed. Then I tried to fix LabVIEW FPGA and XILINX tools with the firewall disabled but din do not solve the problem. I tried with LabVIEW SP1 of 2012 and 2013.

  If you have any suggestions, please let me know! Thank you!

  

  

  We would like that you try to reset the NIAuth database by following these steps:

  1. go to Windows Services (Bring up Windows with Ctrl + Alt + Delete Task Manager, click the Services tab, click the Services button at the bottom right of the window.

  2 stop the NI Application Web Server and NI System Web Server services in this order (right click, stopping service and select).

  2 backup, and then delete all the files under %PROGRAMDATA%\National Instruments\NIAuth: registry.bin and commitmark.

  3. run NI System Web Server and NI Application Web Server services in this order.

  4. navigate to http://localhost:3580 / connection of an IE on the local computer and try to log in with username "admin" and password empty. Succeeds, the server will return one signed in as: message from the admin.

  After you follow these steps, try and connect to the FPGA compiler, and then let me know what are the results.

• Error compiling FPGA-61332: the length of a line to < "file.vhdl" > is too long for xilinx 10.1. Length: < length > Max Length: 4150

  Hello

  When compiling a fairly basic FPGA VI, I get the following error:

  61332 error occurred in niFpgaCompileWorker_ProcessStatusPipe.vi:1<><>

  Possible reasons:

  LabVIEW FPGA: An unexpected error occurred with the build tools. You try to compile the FPGA VI again could solve the problem.

  The length of a line in "NiFpgaAG_0000002e_WhileLoop.vhd" is too long for xilinx 10.1. Length: 32845 Max length: 4150

  Departure time: 17:22:06
  End time: 17:22:12
  Total time: 00:00:06

  Apparently, the vhdl code generator OR forgot to add some CR + LF in the intermediate files. How to work around this bug?

  Kind regards

  Lukas

  Hi Lukas.

  When LabVIEW compiles a VI, the VI is converted into virtual hard disk to be compiled into a file bit by Xilinx.  As you have already understood, this error indicates that a line of code vhd had a length of 32 845 characters, which exceeds the maximum length of 4150 characters for the Xilinx 10.1.

  Although 32 845 characters is very long, it is possible that this is due to the codification of LabVIEW rather than a bug. Some common causes of this problem include large enums, a matrix, or clusters in the code.  Please check in your code.  If you have no luck, please attach a screenshot of the code.  I hope this helps!

  Kind regards

  Dayna P.

  Technical sales engineer

  National Instruments

• 'Error compilation film unknown error' made or export in first or Media Encoder or

  Hi all

  I'll have made troubled and the export of which certainly is a sequence quite complex 2.5 hours of first CC 2015 and Media Encoder. I'll describe the problem, then provide my card, then describe my attempts so far solutions:

  1. The problem: try to make my outside sequence gives the error "error compiling Movie. Unkown Error"at irregular intervals, sometimes after 10 seconds and sometimes after 10 minutes of rendering. It occurs also when rendering of three subsequences that he content and when expporting media first or Media Encoder.
  2. My specs:
     

     Material - I am on Windows 10 x 64-bit on a desktop computer custom built with MSI AM3 + configuration motherboard with an AMD FX6350 3.9 GHz processor, 16 GB of RAM and a 2 GB AMD Radeon R9 380 graphics card, all current drivers.

     Software - creation and Media Encoder are defined to use the reading Mercury (GPU acceleration) engine and the composite linear color, and are both set to update to version updated for release 2015 CC.
     Sequence - I'm editing in square pixels of 1080 p AVCHD, 29.97 frames/second, 48000 Hz sampling frequency, using the only i-Frame MPEG video previews. My sequence has three subsequences, all of them contain a multicam pulling three video sources synchronized sequence (it is a composite event that was recorded live). I export in H.264 MP4 @ 10-12 Mbps with 'Match sequence settings' for the framerate, bitrate and size of the image.

  3. My attempted Solutions: , I started with the basics... Clear your cache of media, delete make files and files video preview, flatten your blocking sequences, export each subsequence individually, create a new project and import the old sequences, all this, trying to render and export between each of these steps. Frankly, I'm bad-shot in the gut. I desperately need to export this sequence successfully and there deliver my video to an audience online and from there, also create versions for DVD and Blu - Ray.

  I'm just wishing so bad for an error code, a clip defective to be identified somewhere, an Executive responsible for headaches, something. Something besides, 'film compilation error. Unknown error. »

  Grateful for any help offered by the community of users of wonderful to Adobe Premiere Pro.

  Hi Nathan,

  Sorry for your troubles. Looks like you have a sequence that should be able to be exported, but can't. To add to your frustration, the warning dialog box has no clue as to what is the error. With what is happening at random intervals, it is really difficult to solve.

  For the latter, the next release of Premiere Pro's warnings more explicit. This update is coming soon. In the meantime, let's work on the export of this sequence.

  Firstly, log a case with support. Here are the details on how to contact them.

  The first thing to look at is your system, I would say. It looks up to the requirements of the standard, however, it is quite a long sequence. If you have lots of GPU based effects and/or Lumetri effects, your VRAM might be out of memory, cancelling export and crashing with error compilation Movie.

  If it was me, my prime suspect. How do you work around that? Avoiding the GPU? In fact, Yes. It will take time for export, most certainly. This could take days. Not much you can do, unfortunately, unless you muscle your hardware. Currently, my guess is that your GPU is probably not powerful enough for what you want to do. In the project settings > general switch to software only.

  Can you avoid this in the future? Yes, with a different workflow what smart favours rendered instead of make or export at the same time with GPU based effects.

  This means that you'd have to transcode the AVCHD video to a codec chip to make and restore the effects along the way in this same codec. At the time wherever you export, you are not typing the GPU because you use files preview instead.

  Info: FAQ: how to speed up making, export or encoding?

  Thank you
  Kevin

• 'Error compiling movie/Unknown Error' when exported.  Great list of ' things I've already tried ' s

  Alright, move to the bottom line here, I spent the last hours 3 juggling with clips and sequences of trying to get my VERY average project to encode and export.  I get the dreaded "error compiling Movie.  Unknown error message.  But there are a few details as to where it is tripping when exporting; more on that later.

  Technical details: iMac, 32 GB of ram, Nvidia 780 M 4 GB, SSD from all around.

  First of all, a list of "Things I've tried."  Which many were inspired by multiple threads, I've already read:

  -Make sure there is not still images exceeding the size of my project (1080 p) settings.  Initially, there was one, it has since then been swapped for a completely different image/picture.  Still unresolved.

  -Make sure there is no offset image drop-down conflicts happening between clips and my settings.

  -All images is 1080 p, so there is no scale happening (not with any of the effects either).

  -Switching to export "in/out sequence" export "entire sequence."

  -Created a new sequence, dropped the sequence published in project parameters matched, tried to export from there.  Same question.

  -A tried to make CBR instead of the variable.

  -Tried to use all the rendering engines (software only, CUDA, OpenCL, etc..)

  -At least a few other things too, but it's so darn late now for this reason, and so I'm so tired that I can't remembering everything.  I'll gladly take any suggestions and report back.

  
  

  Now, I mentioned we're listening at a specific point.  I often read that he goes somewhere around 70% through and is approximately the same in my case.  He arrives at a specific clip/couple of clips and blocks in almost the exact same task.  I messed with these clips too many times to count.  Initially it has been remapped both with keyframes, so I changed it to a constant speed without keyframes. nothing.  Had a directional blur on one of the clips, so I completely; and no change.  I think I tried other things with that particular section of the timeline, but as I said, I'm falling asleep here.

  
  

  Please. Help.  I'm very, very, very close to deserting a ship to FCPX total after so many bugs and crashes (it is not the only issue that hinder the project, as many of you know).  Currently, I am a user of dual-app, different applications for projects depending on how how "inside" I need to get, or if I work with different people on different systems.  But I need something that is RELIABLE.  This is supposed to be a professional software and probably priority #1 for professionals is reliability.  At least in FCP almost everything runs very smooth, and I did not yet have a "can't f * ing finish a project" problem with her.

  I'm sorry, please excuse my behavior; I'm frustrated.

  We have progress!

  So, I've discovered some interesting things (maybe not interesting for anyone who has had or has solved this problem before, but new to me).  It is a long summary of what happened, but I want to explain how I came to the conclusion I did:

  First of all, I took advice from Colin and created a new sequence with the troublesome section, removed all the audio clips.  I thought I could try so suggestion of Ann at the same time, so I deleted FilmConvert not only the effects but ALL the effects of the clip.  The settings include: Filmconvert, directional blur (which a clip has the sum of retouching), speed of adjustment (without keyframes), then an adjustment layer with a very small amount of sharpening applied to it.  I did not remove anything from the adjustment layer.  I then exported with only "Export video" checked.  It worked.

  So, I really wanted to try to pin-point, in hopes of helping someone else in the future.  It's when things are interesting.  So I went back and started around, keeping the audio off the coast and little by little the effects removed.  He went down to the directional blur, which I completely spaced the same mention, because I forgot a little on this subject in the middle of all this (sorry about, 100% my fault not to mention blur; some of you could see as the issue immediately, had I mentioned).  With everything, but directional blur applied, it has exported.  I even put the audio tracks to, re-checked Export Audio, and everything worked well.  So the blur effect seems to be the question... or so it seems.  Another interesting thing that's happened is that for one of the first attempts to export without audio, I left the blur effect but take off FilmConvert.  It worked as well.  Finally, my last attempt was to export everything, audio and video and all the effects, however, this time I noticed that on the second clip in the sequence I had accidentally put the blur directional above FilmConvert in the effects Panel (the other clips there like the last effect applied).  So I moved it back to the bottom of the chain of effects.  Of course, it worked.

  Finally, and above all, I tried full export with effects in their place.  SOUL crashed, twice.  Frustrating, but unfortunately enough widespread lately.  However, the project is export straight out of first, first try.  Feeling very relieved.

  I guess my question now is... Why?  Is - this common with all the effects in the first of blur?  To summarize what the section of the clips looked like, it's just a quick moment of time being accelerated x 5, with a slight blur to simulate an exaggerated movement too vague.  Yes, I do usually this kind of effects in After Effects, with more control and better results, but the project is a quick and informal editing, so I don't bother at first.  A big thank you to all who contributed to the discussion, if your suggestion has directly touched the issue or not, it's the community to commit that really matters.  I hope that son like this can get small bugs like these resolved or help someone in a similar situation to learn how works the effect controls panel.  Nevertheless, there is useful information on this topic, for sure.  Thanks again to all who have helped me learn along the way.

• * Error compiling Movie - Unknown Error * when exporting/rendering.

  Whenever I try to export the media or to restore the timeline, he appears with this error. "Film compilation error. Unknown error. »

  

  As you can imagine it's very frustrating, I followed the same process accurate I always did and he have never had a problem previously. No media is missing, and I even tried to use the YouTube preset - wrong again.

  I use first Pro CC 2015 - I even tried uninstalling and reinstalling as update all the CC apps.

  If the first does not know what is the error, how am I supposed to know? Help, please!

  Error compiling movie... some debates and ideas

  -1, create a new project and import the project that has errors and see if that fixes the problem

  -http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html

  - and nested sequences http://forums.adobe.com/thread/955172

  - and WMV files of http://forums.adobe.com/message/4629210 frame rate

• Media Encoder: Error compiling Movie - unknown error

  As the title, I have problems with Adobe Premiere Pro CC 2014 Adobe Media Encoder CC 2014 and - "Adobe Media Encoder: error compiling Movie - unknown error" appears each time I try to export my video. Both are trial versions, but my Adobe Media Encoder CC 2014 had ended and my Adobe Premiere Pro CC 2014 have left about 1 week of trial. Please help as soon as possible because I have to do a large project for my school, so cannot function without these great apps. Thank you.

  Hi Charles,

  Have you tried to export with Premiere Pro?

  Go to the file Menu in Premiere Pro > project settings > general and change 'Mercury playback engine' (if it allows) to 'Only software Mode' and then try to export from Premiere Pro.

  Mention also, what operating system are you using, hard RAM (Exxternal or internal), or several installed graphics cards and formats of files used in the project.

  Have you tried to make the scenario first before export?

  If possible send a screenshot of the full timeline.

  Vinay

• Cannot restore: error compiling Movie: unknown error

  Hey there,

  Need help,

  I'm working on a short sequence (15 seconds).

  It has a few stacked video channels and I have applied overlays and fixed most of the color channels.

  The film is XMF files from a C300. Sequence of parameters defined in accordance with the proposed recommendation (IE when I dropped the clips).

  I get the "error compiling Movie: unknown error" message whenever I try to make or export.» I went through a lot of steps suggested by a blog post, I found here - I went through the sequence, removed the clip, has tried to return, then removed the effects.

  When I deleted the effects and buried the clips off side by side he made out for me.  That's great, but I have to be able to export the effects all in and empty them in layers. What can I do? Starting to pull my hair!

  Details...

  CS6. O

  MacBook, 4 GB Ram,

  Graphics card: NVIDIA GeForce GT 330 M 256 MB

  Thank you,

  Simon

  Hey,.

  Thanks for the tip - tried all of those, unfortunately with no joy.

  I have not deleted my cache - also no joy.

  BUT I installed a (now 6.0.5) update and it does.

  Thanks for the help,

  Simon

• Error compiling Movie.  Unknown error.  Premiere Pro export failed

  Error compiling Movie.  Unknown error.  I get this message when you try to export my calendar to any format.  It exports for a while, then I get this message.  When I try to export using the media encoder it gives me just the sound of sheep.  I'm starting to hate this sheep.

  Does anyone know how to figure out why it throws up to this error message, and that the solution is to go around?  I've lost countless hours trying to figure out a work around.  I can't just scrap the project, it took me weeks.

  I was able to export fine dozens of times before, so I'm not sure it's important that my features are but here goes:

  Custom PC integrated with windows 7pro SP1

  Intel Core i7 - 2600 K CPU @ 3.7 GHz 3.4GHz

  16 GB of ram

  64-bit operating system

  After the implementation of many suggestions here, I was able to export the project 9 min successfully.  I need to take you all at dinner.

  I don't know what suggestions has been around, but I have a feeling that it was a combination of ideas that went around.  Here's a breakdown of what I did to change the project so that it can successfully export:

  1.) reset all stills in motion tab to its original settings & then click right on it in the timeline panel and choose 'to scale to the size of the image.

  2.) replaced all files nested with the original tracks.

  3.) changed the sequence settings (changed under subsection video previews and editing custom Mode > select the File Format as Microsoft AVI, uncompressed Codec Preview.)

  I had to make a new render all previews after changing the settings of the sequence, and I had i/o errors while the process, but Adobe first CC of reboot resolved somehow these errors.  Several times during the editing process of the chronology (based on items 1-3) previously mentioned I had to reboot first due to a loss of the preview screen and inability to make things.  At the end of the day, I could so that he could succeed export so again once I thank you all.  It's a VERY important project for me and I'm serious about you take all this at dinner

• Impossible to compile the FPGA in project

  Hello I get the following error when I am trying to compile an FPGA VI on a Compact Rio 9022, I missing something on my stand in? Everyone has seen this before and know what is happening? An internal software error occurred. Please contact National Instruments technical support on ni.com/support with the following information: 7 error error component the generator module VI: NULL Possible reasons: LabVIEW: File not found. The file may have been moved or deleted, or the path to the file would be incorrectly formatted for the operating system. For example, use- as Windows path separators: on Mac OS, and Linux. Check that the path is correct using the command prompt or file Explorer. ========================= NOR-488: The non-existent GPIB interface.

  This looks really familiar.  I know I've seen this error.  I think there is a problem if you upgrade to the latest NOR-RIO, but you don't put at level LV FPGA 8.6.0 to 8.6.1, or something like that.  Would it be, kmoyna?

• Choose ISE or Vivado Xilinx tools for a specific compilation of FPGA

  Hello

  Is there a way to specify what version of Xilinx Compilation tools to use when compiling an FPGA VI? I want to try the version Vivado tools rather than the version of ISE to see if there is an improvement. I have listed some information on my setup below.

  It's my current setup:
  NI5772 / PXIe7966 digitizer and FPGA
  SMU-1082 chassis
  SMU-PCIe8388 / SMU-PCIe8389 controller
  LabVIEW 2014

  In the past, I used the LabVIEW 2014 FPGA Xilinx tools 14.7 Module to compile my code. But I also want to try the version of Vivado, "LabVIEW FPGA Module Xilinx tools Vivado 2013.4 2014', to see if it gives better results."

  Page-based "compatibility between tools Compilation of Xilinx and FPGA hardware OR" here:
  http://www.NI.com/product-documentation/53056/en/
  Looks like the PXIe7966 FPGA must be compatible with the tools of Vivado 2013.4.

  I tried to uninstall the version 14.7 ISE tools, and install the 2013.4 of tools Vivado (so Vivado 2013.4 tools are the only xilinx tools installed on the computer). But LabVIEW complains that the ISE 14.7 tools are not installed and does not compile the FPGA VI.

  Thank you!
  Michael

  This FPGA is a Virtex-5 FPGA, so you're stuck with ISE.  You need a card FPGA that either uses the architecting chip (I think it was only in cRIOs) or 7 Kintex to use the compiler to Vivado.

• Compilation of FPGA hangs in LV2014SP1

  Hi all

  I've recently updated to LV2014SP1 of LV2014. Since then, I can't compile my FPGA VI locally for a project (cRIO9067), which was done in LV2014. Whenever I try, the compiler will in the step of "logic optimization. Then, after severyl minutes, vivado.exe drops to 0% CPU usage and are still just there indefinitely. After a long period without increasing time CPU for vivado.exe, the worker of compilation obviously restarts the compilation and the same thing happens again. Yesterday I let sit for 4 hours, and when I think about it, vivado.exe had consumed some time CPU 36 minutes and that he was still sitting there with 0% CPU usage.

  When you use a server compilation (still under LV2014), the VI compiles fine from the same project on the same PC! In addition, compilation of other screws FPGA for the same thing and other targets (cRIO9030) works locally.

  The same problem occurred on a second PC that has also been upgraded to 2014SP1. Even up until 2014 with the toolkit and FPGA Xilinx 13.04 time has not helped - I can not always compile.

  Any ideas or similar problems anyone?

  Hey, Jörg,.

  Can you download and install CompactRIO Module Support 14.6?

  We have published a patch for 926 x modules that did not compile with the SP1 build tools exist.

• compilation of FPGA

  Hello!

  How can I compile a code to the FPGA without hardware. I just want to see something on my FPGA BRAMs. If I compile code to FPGA with actual hardware, it takes too much time.

  Best regards

  HITMANNN wrote:

  If I compile code to FPGA with actual hardware, it takes too much time.

  As long as you have defined your specific material in the LabVIEW project, you can compile your FPGA screw with or without connection, but in all cases, it will take the same time to compile. Compilation of FPGA can be a lengthy process.

• Error 2147220995 has occurred to the unknown

  Hello

  I try to use the toolkit to Vanessa echem, more precisely a updated the IV table VI, measuring more than current 5 cycles at a specific voltage. This process then repeated a number of iterations, each time to the intensification of tension in increments of 0.1 volts. After each iteration, the last of the 5 points is recorded in another graphic in the hope of generating a curve on a specific range of voltages. However, every time I run the program, one of the following error messages appears generally, always at the end of a loop when I close the mention the potentiostat at the end of an iteration of the loop, but not always at the end of the iteration as well.

  Error 2147220995 has occurred to the unknown

  536870863 error has occurred with the exception

  two of these errors are unknown so I don't know what to change. The confusing part is that the errors do not occur always and when they do it is not always at the same point in the program. For example, sometimes it will run thtouigh several iterations with no problem and other times, it will display an error in the first. I use version 8.5 and have attached the VI changed as well as the VI original table IV that was included in the software.

  Thanks in advance for any advice,

  Kai

  Have you tried to contact the developer for the Toolbox?  It looks like some kind of exception thrown within their Automation object.  This kind of thing happens generally in passing in the wrong type of parameter or by sending something out of range.

  Have you tried to probe the cluster of error to try to isolate which call is throw the exception?