Pinch to zoom to change Web-mode device pixels

Similar Questions

• Firefox changed view, zoom in on Web sites

  My Firefox on a laptop HP windows 7 updated today (25 June) and the adjusted zoom, change the font size, but also icons and a zoom in on Web sites. I noticed in the list of changes to the program that it says "made improved on high-resolution screens" that is the problem and is anyway I can disable this? I was very happy with the resolution before and see this sticky and boring...

  This message has been revised to include information about an add-on. A copy of the original post appears below the horizontal line.

  Firefox now allows to adjust the zoom level of the page according to your settings in Windows, to better support high DPI displays. For example, if Windows is set to the font size of 125% (120 DPI), the content area will be enlarged by 25% compared to 21 of Firefox and earlier versions.

  The straight to the earlier style display line is the approach of two steps:

  Step 1: Install the extension of theme font & size changer . Why? Because disabling the scaling affects the area of chrome (menus, toolbars and tabs) as well as content.

  After restarting Firefox, click on the new 'A' icon at the right end of the navigation bar and change the size of the police from Normal to 15.

  Step 2: Change your global scaling in the topic: configuration preferences editor.

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the filter box, type or paste the pix and make a pause so that the list is filtered

  (3) double-click layout.css.devPixelsPerPx and change its value to 1.0 for Firefox 21 size of the fonts in the content area.

  This should take effect immediately without another.

  Original message

  Firefox is now trying to adjust the level of zoom depending on your Windows settings, and more to support more high DPI screens. It won't be to everyone's taste.

  I still Fx21 on this computer so I can't test it myself, but could you check the following setting and try to fix it:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the filter box, type or paste the pix and make a pause so that the list is filtered

  (3) double-click layout.css.devPixelsPerPx and change its value from 1.0 to restore the appearance of the previous versions of Firefox for the small fonts or report higher for larger fonts. For example, 1.25 corresponds to the font size of 125% in the Windows display settings.

  Who help me?

  More information in this thread: How to set the default font to a lower value size?

• Pinch to Zoom-the touchpad does not not in Adobe Reader DC / Illustrator (Microsoft Surface book)

  Hi all

  The pinch to zoom-the touchpad is an important part of my work, but I can't make it work in Illustrator CS6 Adobe DC or on the cell Surface book. Does anyone know a potential solution?

  There may be some registry that I can change or manifest some file, I can create to resolve this problem?

  On my previous laptop touch I could solve this problem by disabling the touch mode in Adobe Reader, but for the book of the Surface, the touch screen remains active even when the touch mode is disabled.

  Thank you

  Justin

  Hi Sarah,.

  Thank you for your response. Unfortunately, this does not solve the problem - I think it may be a software problem and a hardware, that is, the touch screen is the default input device because it is used also in tablet form.

  For now I have switched to Foxit Reader and can confirm the pinch to zoom-the touchpad works in this software (I do not mean to be inflammatory, but rather as at least temporary difficulty for users experiencing this problem!).  However, I am not aware of the alternatives comparable to Adobe Illustrator, so I'll have to support limiting it.

  Best.

  Justin

• Venue Pro 8 - Office pinch to zoom

  I understand that MS in his infinite wisdom (and suicidal streak) has decided to ban the pinch and zoom on the desktop of Windows 8.  Is there a cure for this unimaginable decision?  Third is fine.

  I can't use the SITE Pro 8 at the end I bought it without being able to control the app I want to demonstrate with her.  Without funding pinch and zoom, application controls are too small for my fingers to normal sizes interact effectively with.  In fact interactive elements on the desktop are usually unusable without pinch and zoom.  The "magnifying glass" is useless, and the device plays quite well with a stylus.

  If I can't solve this problem, I'll have to return the purchase to Costco as unusable.

  Thank you

  I pass the touch pointer when I need to get into tight places.

  http://www.lovesummertrue.com/touchmousepointer/en-us/

  I use the mode that turns the entire screen in a Tablet coming to overlap the display.

  

• Two fingers to scroll and Pinch to Zoom do not work

  Hello. I bought a brand new HP 4-1115dx this morning, and the two fingers to scroll/sleeve to zoom stopped working completely after 15 minutes of use.

  I have twice now uninstalled the driver and re installed from site Web from HP, currently using v16.2.17.0 latest (available for my device).  I went into the settings of the Clickpad, provided two fingers to scroll and pinch to zoom are both checked and entered in the settings/transmission for each of these items and provided all the appropriate scroll options would be checked.  I also watched the synaptics on the toolbar icon, and 'disable gestures' is NOT checked.

  When I turned on the computer for the first time, twofinger scroll and pinch to zoom in when selected by default and "scrolling" (which is a right mouse pad finger scrolling was NOT selected by default.  15 minutes after turning on the new device, I ticked 'scrolling' to see if I liked the right side of the touchpad scrolling better.  I have since failed to get the two fingers to scroll / pinch to zoom out (I've several times switched on / two fingers to scroll and the a finger right side touchpad "scroll".)

  Help, please!  This isn't the end of the world for me, but a feature that does not work after 15 of owning a product makes me nervous for other features do not down the road!

  Thank you

  Steve

  Steve1234321,

  It could be a problem with the synaptic software.

  Go to control panel and uninstall the synaptic program.

  Start-> Control Panel Type-> uninstaller-> right click and uninstall synaptic.

  If you restart, go ahead.

  Now lift the Recovery Manager

  Go to start-> type of recovery

  You should see the Recovery Manager in the list

  Open the Recovery Manager, and then click on software and driver re install

  Go through the list and find synaptic and reinstall.

  It is said synaptic driver, but the program is with the driver.

  By clicking on the White Star congratulations on the left is a way of saying thanks!

  I would like to know how everything goes.

  Nice day.

• Cannot pinch and zoom in on mobile site Muse

  I created a site on Muse, who works for the office, but seen on mobile, I can not zoom in. Any ideas?

  I just checked your site in iOS and Android phone and found this pinch and zoom does not work in the IOS devices however his works in android.

  I have 2 suggestions for you.

  1 create a layout phone separate or breakpoints for phone (in case of Muse CC 2015.1) and the test.

  2 avoid using effects of roll and then check if it works very well.

  For error of Web fonts I advise you to do the following:

  • Leave the Muse.
  • Signed on Creative cloud Application.
  • Kill the process in activity monitor (MAC) CCLibrary or (Windows) Task Manager
  • Sign in to Creative cloud Application.
  • Launch of Muse and check if it works.

  Kind regards

  Vivek

• Strange problems when registering for the web and devices.

  Im a user interface designer and spend a lot of time working with illustrator and photohop. When I draw I normally create vector mockps of my work and then export the slices using work plans and save for web and devices. Yesterday Illustrator began to have problems to export files. The files look good on my computer, seen with preview mode of pixel, but when I export they look really bad. Here is an example:

  This is a screenshot of part of a mobile app im working on 100% and 200%

  

  

  This is the same area when exported using 'save for web and devices' at 100% and 200%:

  

  

  as you can see there is a dramatic loss of quality. the icons look almost like a low color gif...

  Here's what I've tried:

  I tried to change the settings of the exporter. I used to use png 24 but I tried all the different settings and they all the same thing. the only one who seems to look ok are swf and svg.

  I copied my files on photoshop and exported from there. that works very well, but it's a pain.

  any help would be great.

  Eli

  www.elilang.com

  Here is a screenshot with transparency off the coast of screen and optimized art... still does not.

  

• Save for Web and devices accidents Photoshop CS5

  I work with Photoshop CS5 on a MacBook Pro with 4 MB of RAM in Mac OS 10.5.8. I upgraded from CS3, a month ago. I tried the RGB to 8-16 and 32 bit switching modes, but every time I have "save to the Web and devices ' my Photoshop crashes. It does not crash in the display window. It crashes when I choose to save. Can I get the spinning beachball and a slow fall. There is no error message, and it happens every time. I tried to delete the preferences. I found somehow there was some left behind CS3 prefs. But deleting prefs has not changed the situation. I have a lot of RAM, so I don't think that it is a memory problem. And there is no other behaviors in my system or with Photoshop.

  
  Any ideas, what is happening?

  And I can not find your crash report in our database based on the information that you pasted here (which are not the complete crash report Adobe).

  Did you send the accident report in Adobe?   If you can give me the user GUID from the bottom of the crash report, or the e-mail address entered when sending in - so I should be able to find it.

• Save for web and devices CS3 Windows problem

  I've had this problem for a few days now. I try to hit Ctrl + Alt + Shift + S for save for web and devices, and nothing comes. If I click on the file menu, and I see that the option is grayed out. I thought reset help entangled, but he continues to themselves, then someone told me it was the size of the image, but that is impossible, because I couldn't save a photo 5 "x 5", and is not too big. " I have a feeling that maybe it's the color settings, but I don't know anything in there, help would be appreciated.

  Go to Image/Mode in PS and see if it's 8-bit and RGB color and must be changed.  Many functions do not work with 16-bit images.

• lost-mode device was found

  I get the text informing that "lost-mode device was found."  citing IOS 9.3.2 and say to connect to Internet link provided - this looks terribly strange - suggestions

  There has been a number of reports of other something similar. He tries to get you your password into a Web site that looks like an official Apple site, but is not. They can then use your password to bypass Activation lock.

• Zoom in print - preview mode is for the display of the page size or the size of the content on the page?

  Print - Zoom preview.

  When I zoom it changes the size of the page on displays on the screen and it also changes the font size of the displayed text.

  Is this a bug or I'm doing something wrong.

  Either way, I need both the features...
  i.e., I want to change the size of the page, as it is displayed and I also want to be able to change the size of the content of the page - but I'd like to separate selection in box / controls for each.

  Print preview is a scale control, than the 'ladders' everything on the page, text and images. The paper size and margins are not changed when the 'balance', these controls are elsewhere. Basically, a scale of 50% will use half of the sheets of paper to print a Web page, it would be to shrink or 100% to adjust.

  Who answers your question fully?

• Impossible to change the mode of the transceiver (4-wire 2-wire) for 485 USB serial port

  I'm trying to set up a USB-RS485 device, according to this knowledge base document:

  http://digital.NI.com/public.nsf/allkb/1D516C10D7EDFAC6862571110073B8F4

  However, all advanced under the port com series options are grayed out and is not possible to change the mode of the 4-wire 2-wire transmitter/receiver. How can I activate these?

  Thank you.

  On Windows Vista and later versions, these settings can only be changed in MAX as an administrator. Just right-click on the icon and choose 'Run as administrator' and everything should be made available to you.

• Help: More sensitive to the pinch and zoom

  I recently bought Acer, Aspire V3-572PG (Aspire |) (V), with 8.1 Windows installed, it has a screen pinch and zoom that drives me crazy.  The screen automatically reached the size of an elephant and or reduced to a postage stamp all the few minutes that I use my touchpad, navigate, or even breathe, I have to manually change the size of the screen at 100%, it is impossible to use.

  I can't find the settings to change or disable this, please advise.

  Thank you.

  Thanks for the tips, I found that she was using a Synaptics driver.

  I did contact Acer support and they said that it wasn't a problem requiring her repair because it is an option on the laptop, ignoring that I informed them that I didn't want the screen to resize on his own.

  But the laptop has been a few weeks and I was disappointed that I should start taking steps to solve a problem that Acer deny exist and possibly judge the labtop warranty criteria, because I tried to fix it myself.  So instead, I went back to the store and got a refund and I will not buy another product Acer.

• Site content Web support not in Web mode, but the same website works in the mobile browser

  Hi all

  I try to open this site in https://m.freelancer.com/ webview but conent does not not in Web mode. But same website that I opened in mobile webbrowser then it works fine.

  So can I know what property I need to configure Web layout?

  Waiting for your comments and suggestion.

  Hi BojanKogoj,

  I attached the source code please look at and let me know what I need to make changes.

  I use the SDK 10.2.

• How can I change the audio device automatically between exits?

  Original title: Dual monitor mode

  I am currently running Windows 7 Home Premium 64-bit with Media Center and my hardware is Inter Core 2 Quad with NVIDIA GEFORCE 9800GT and an integrated Hauppauge WinTV HVR-1800 ATSC/QAM.

  I have two DVI-HDMI, one output to my monitor 24 "HD and one for my 42 '' HDTV and computer speaker are connected to the SPEAKER OUT behind the computer.

  The problem is when I look at Internet TV through my computer on my HDTV, I need everytimes switch my Default Sound Source of speakers to the HDMI OUTPUT in my-> hardware & sound control panel and market back when I want to use my computer.

  Someone knows how to fix this?

  Hello, DuFF1

  You can have only one default device.

  It is not possible to put two devices by default, nor is it possible to configure the output in default Media Center device. You can try searching for additional Media Center change the audio device by default or continue editing the device default manually before watching TV on the Internet.

  You can leave your comments on the following link:http://mymfe.microsoft.com/Windows%207/Feedback.aspx?formID=195

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.