Ping ESXi 6.0 U2 problems

Similar Questions

• MD3200i / ESXi 4.1 Multipathing problem

  I'm having a problem with a MD3200i and our new virtual server T710 - it works, but performance is absolutely catastrophic.  Here are the details...

  Server is a T710, 4 integrated network interface cards + a 4 Intel Server NIC port.  Execution of ESXi 4.1 was last updated - now that he has 6 guests on it, going to be total 10 (most are lightly loaded special servers). Server is connected to the San 4 direct cable to port 4 Intel Server NIC to 4 ports on the management controller

  We have 4 drives (2 TB SAS) in the SAN - not my first choice - but what the customer wanted. Table is configured as a RAID-10.  We have 3 logical volumes - to 2, to 1 and 750 GB.  Each is formatted as a VMFS data store.

  I followed the instructions in the White Book of Dell to implement the MD3200 with ESX 4.1 and it does not appear that we have multpathing working properly.  The VCenter Client is only show 6 usable track - should be 12 total (3 volumes of x * 4 network cards).

  I went through the docs, a handful of times, can't find anything that seems an obvious problem.  Here's the output of certain commands in the documentation - if something else would be helpful, let me know.  I feel that I'm running a wall of bricks here, any advice would be great!

  Thanks in advance...

  ~ # esxcfg - NICS - l
  Name PCI Driver link speed Duplex MAC address MTU Description
  vmnic0 0000:01:00.00 bnx2 up to 1000Mbps Full 00:25:64:fe:51:c1 1500 Broadcom Broadcom NetXtreme II BCM5709 1000Base-T Corporation
  bnx2 0000:01:00.01 vmnic1 low 0Mbps 00:25:64:fe:51:c3 half 1500 Broadcom Broadcom NetXtreme II BCM5709 1000Base-T Corporation
  bnx2 0000:02:00.00 vmnic2 low 0Mbps 00:25:64:fe:51:c5 half 1500 Broadcom Broadcom NetXtreme II BCM5709 1000Base-T Corporation
  bnx2 0000:02:00.01 vmnic3 low 0Mbps 00:25:64:fe:51:c7 half 1500 Broadcom Broadcom NetXtreme II BCM5709 1000Base-T Corporation
  vmnic4 0000:83:00.00 igb up to 1000Mbps Full 00: 1B: 21:77:3 b: 08 9000 Intel Corporation 82576 Gigabit Network Connection
  vmnic5 0000:83:00.01 igb up to 1000Mbps Full 00: 1B: 21:77:3 b: 09 9000 Intel Corporation 82576 Gigabit Network Connection
  vmnic6 0000:84:00.00 igb up to 1000Mbps Full 00: 1B: 21:77:3 b: 0 c 9000 Intel Corporation 82576 Gigabit Network Connection
  vmnic7 0000:84:00.01 igb up to 1000Mbps Full 00: 1B: 21:77:3 b: 0 d 9000 Intel Corporation 82576 Gigabit Network Connection

  ~ # esxcfg - swiscsi - q
  ISCSI Software is enabled

  ~ # esxcfg-scsidevs - has
  vmhba0 ata_piix link-n/a sata.vmhba0 (0:0:31.2) Intel Corporation 2 port SATA IDE Controller (ICH9)
  vmhba1 mptsas link-n/a sas.5842b2b04cd6af00 (0:3:0.0) LSI Logic / Symbios Logic Dell SAS 6/iR integrated
  vmhba32 ata_piix link-n/a sata.vmhba32 (0:0:31.2) Intel Corporation 2 port SATA IDE Controller (ICH9)
  vmhba33 iscsi_vmk online iqn.1998 - 01.com.vmware:spag - 261d 8287 iSCSI Software adapter

  ~ # esxcfg - vmknic - l
  Interface Port Group/DVPort IP IP family address Netmask Broadcast MAC address MTU TSO MSS active Type
  Managing IPv4 10.100.101.251 network vmk0 255.255.255.0 10.100.101.255 00:25:64:fe:51:c1 1500 65535 true STATIC
  vmk1 iSCSI network IPv4 10.100.102.20 255.255.255.0 10.100.102.255 00:50:56:74:38:cc 9000 65535 true STATIC
  iSCSI 2 IPv4 10.100.102.21 network vmk2 255.255.255.0 10.100.102.255 00:50:56:7 b: this: 6 a 9000 65535 true STATIC
  iSCSI 3 IPv4 10.100.102.22 network vmk3 255.255.255.0 10.100.102.255 00:50:56:75:19:70 9000 65535 true STATIC
  iSCSI 4 IPv4 10.100.102.23 network vmk4 255.255.255.0 10.100.102.255 00:50:56:78:e8:66 9000 65535 true STATIC

  ~ # esxcfg - vswitch - l
  Switch name Num used Ports configured Ports MTU rising ports
  vmnic1 vSwitch0 128 13 128 1500 vmnic0, vmnic2, vmnic3

  Name PortGroup VLAN ID used rising Ports
  VM network 0 7 vmnic0, vmnic1, vmnic2, vmnic3
  Management network 0 1 vmnic0, vmnic3

  Switch name Num used Ports configured Ports MTU rising ports
  vSwitch2 128 9 128 9000 vmnic4, vmnic5, vmnic6, vmnic7

  Name PortGroup VLAN ID used rising Ports
  iSCSI 4 0 1 vmnic4 network
  iSCSI network 3 0 1 vmnic5
  iSCSI network 2 0 1 vmnic6
  iSCSI 0 1 vmnic7 network

  This is a very nice opening message, because it provides the necessary information to begin to understand this. One thing missing is the "esxcli swiscsi nic list d vmhba 33. This confirms if the vmkernels were assigned to the iSCSI initiator.

  Your problem is that you use a single subnet for the entire iSCSI configuration.

  Each NIC (that you want to use for iSCSI) needs its own subnet. If you do not (from your network group) superior to scale 10.10.102.0 - 255, just subnet with a 27-bit subnet mask. The gateways are not relevant because I doubt that your server will try to connect to a San in a completely different network, so you don't have to worry about having to do/create additional gateways on the switch (s).

  Here is an example of setting based on your IP ranges and modify with a subnet mask of 27 bits (255.255.255.224) (to avoid having to get several IP address ranges):

  SAN iSCSI ports:

  Controller 0:

  iSCSI port 0: 10.100.102.1

  iSCSI port 1: 10.100.102.33

  iSCSI port 2: 10.100.102.65

  iSCSI port 3: 10.100.102.97

  Controller 1:

  iSCSI port 0: 10.100.102.2

  iSCSI port 1: 10.100.102.34

  iSCSI port 2: 10.100.102.66

  iSCSI port 3: 10.100.102.98

  News of the iSCSI Server (in a context which is understandable if all goes well):

  -vmnic7-> network->-> 10.100.102.3 vmk1 iSCSI

  -vmnic6-> iSCSI network 2-> vmk2-> 10.100.102.35

  -vmnic5-> iSCSI network 3-> vmk3-> 10.100.102.67

  -vmnic4-> iSCSI network 4-> vmk4-> 10.100.102.99

  This info makes sense?

• ping for the pix vpn problem

  Hello

  I got a pix 501 (6.3 - 4) on a local network and try to use Cisco VPN Client (4.0.2-D) on a remote pc.

  I can open a vpn session.

  I can't ping from the remote pc to the LAN

  I can ping from any station on the LAN to the remote pc

  After that I did a ping of a station on the LAN to the remote pc, I ping the remote computer to the local network.

  I am so newb, trying for 2 days changing ACLs, no way.

  I must say that I am in dynamic ip wan on the local network and the remote pc.

  Any idea about this problem?

  Any help is welcome.

  Here is the configuration of my pix:

  6.3 (4) version PIX

  interface ethernet0 10baset

  interface ethernet1 100full

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  activate the password * encrypted

  passwd * encrypted

  pixfirewall hostname

  domain ciscopix.com

  clock timezone THATS 1

  clock to summer time CEDT recurring last Sun Mar 02:00 last Sun Oct 03:00

  fixup protocol dns-length maximum 512

  fixup protocol ftp 21

  correction... /...

  fixup protocol tftp 69

  names of

  name 192.168.42.0 Dmi

  inside_access_in ip access list allow a whole

  inside_outbound_nat0_acl ip access list allow any 192.168.229.0 255.255.255.0

  outside_cryptomap_dyn_20 ip access list Dmi 255.255.255.0 allow 192.168.229.32 255.255.255.224

  access-list outside_cryptomap_dyn_20 allow icmp a whole

  pager lines 24

  opening of session

  logging trap information

  Outside 1500 MTU

  Within 1500 MTU

  IP address outside the 209.x.x.x.255.255.224

  IP address inside 192.168.42.40 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  IP local pool dmivpndhcp 192.168.229.1 - 192.168.229.254

  location of PDM 192.168.229.1 255.255.255.255 outside

  209.165.x.x.x.255.255 PDM location inside

  209.x.x.x.255.255.255 PDM location outdoors

  PDM logging 100 information

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_outbound_nat0_acl

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  Route outside 0.0.0.0 0.0.0.0 209.165.200.225 1

  Timeout xlate 0:05:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  AAA-server GANYMEDE + 3 max-failed-attempts

  AAA-server GANYMEDE + deadtime 10

  RADIUS Protocol RADIUS AAA server

  AAA-server RADIUS 3 max-failed-attempts

  AAA-RADIUS deadtime 10 Server

  AAA-server local LOCAL Protocol

  Enable http server

  Dmi 255.255.255.0 inside http

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  TFTP server inside the 192.168.42.100.

  enable floodguard

  Permitted connection ipsec sysopt

  AUTH-prompt quick pass

  AUTH-guest accept good

  AUTH-prompt bad rejection

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA

  Dynamic crypto map dynmap 20 match address outside_cryptomap_dyn_20

  map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map

  outside_map interface card crypto outside

  ISAKMP allows outside

  ISAKMP identity address

  part of pre authentication ISAKMP policy 20

  ISAKMP policy 20 3des encryption

  ISAKMP policy 20 chopping sha

  20 2 ISAKMP policy group

  ISAKMP duration strategy of life 20 86400

  vpngroup address dmivpndhcp pool dmivpn

  vpngroup dns 192.168.42.20 Server dmivpn

  vpngroup dmivpn wins server - 192.168.42.20

  vpngroup dmivpn by default-field defi.local

  vpngroup idle 1800 dmivpn-time

  vpngroup password dmivpn *.

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  VPDN username vpnuser password *.

  VPDN allow outside

  VPDN allow inside

  dhcpd address 192.168.42.41 - 192.168.42.72 inside

  dhcpd lease 3600

  dhcpd ping_timeout 750

  Terminal width 80

  Cryptochecksum: *.

  Noelle,

  Add the command: (in config mode): isakmp nat-traversal

  Let me know if it helps.

  Jay

• Unable to ping ESXi 5.5 VM workstation 11 comments

  Hey all,.

  A lot of research and have not found good results. Currently impossible to ping to my VM ESXi from my Windows 10 laptop that runs 11 workstation.  I installed a custom VMnet (host only) with a specific subnet to the ESXi management interface. I loaded this VMnet even to my ESXi VM settings. I dropped my windows firewall, disabled the anti-virus software, disabled firewall ESXi and reconfigured NIC drivers to vmxnet3 without success. I know the VMnet I created works because I have an XP machine VMnet even we are able to ping successfully between my laptop and the XP VM.

  Any guidance would be appreciated.

  Fixed with the help of collaborator. I'm all new to VMware and I have a lot to learn.

  With the configuration, it is indicated in my previous post, I made the following changes.

  Modification of my trade to VLAN ID 0

  Configured for vmxnet3 NETWORK interface drivers

  I can now my computer vSphere mobile host in my ESXi 5.5 VM guest.

• Behavior of 5.5 very strange Ping ESXI

  So I have a simple two great host * white boxes * lab at home. Both hosts run ESXI 5.5 and are connected to a 16 port switch TP-link GIG using Cat5e.

  Today I implemented a small third host with a single NETWORK Realtek GBE Lan card card. This host is wired in to the same switch as the other hosts on the same subnet and not on any vlan.

  After going through the installation process, I have ip'ed the host and for some reason it failed my gateway, DNS server or all the other guests.

  I ran a Ping of my workstation which is again on the exact same network and I get weird results like that. Have no idea what might be up?

  

  I would say a conflict of ip address, bad, bad port or bad NIC cable.

  In this order

  Linjo

• Boot PXE ESXi 5.5.0 problems

  
  Trying 5.5 to the PXE boot ESXi and the conduct of affairs.  Receiving the message ' Initial menu has no entry tag ' when I understand what follows in the pxelinux.cfg file.

  default esx-5.5/menu.c32

  title of menu install ESXi 5.5.0

  Tag install

  label of the menu of ESXi 5.5.0

  kernel esx-5.5/mboot.c32

  Add esx-5.5/boot.cfg - c

  I have solved my problem.  It turns out that the pxelinux.0 file we have on our kickstart server is old and what is not compatible with mboot.c32 and menu.c32.

• ESXi 5 storage connectivity problems

  When I was setting up our infrastructure to vsphere 2 years ago I did everything according to the "best practices" (Netapp, VMWare and Cisco).

  I had 2 4.0 hosts and I implemented the storage network (NFS and iSCSI) as an EtherChannel on one side of the switch Cisco and active NIC and IP HASH in a side ESXi load balancing.

  Now, I just added 2 more than 5.0 hosts, reclassified vCenter to 5 and wanted to set up the new host for storage, but that is the problem.

  Somehow ESXi5 let me use exactly the same configuration, I can't have 2 active adapters on both ESX and for this reason, I can't use hash IP in this vSwitch load balancing.

  So, how am I suppose to add Stoarge to the new ESXi5?

  EtherChannel is no supported network storage more on ESXi5?

  If I have to stop using EtherChannel on the CISCO site that will break my conection of storage for the two production hosts ESXi 4.

  Any input appreciated.

  Thank you

  Add maps via the iSCSI GUI software is ports VMKernel will link individual (and usually multiple) of a single software iSCSI initiator.  "It's the GUI version of ' esxcli swiscsi nic add n d .

  To configure this for vSphere 5, VMkernel port NIC grouping settings must be configured as described in the error.

  If you choose to not explicitly link VMkernel ports the software initiator, let the empty Network Configuration tab, and the VMkernel routing table automatically chooses an appropriate VMKernel port to connect.  According to your description, this is how your environment vSphere 4 is set up.

• ESXi 4.0 performance problem

  Hola a tod@s,
  

  
  

  I have a server with VMWare ESXi 4.0.0 (208167) con las caracteristicas material Editor, currently estoy sufriendo problemas performance, El alguna ayuda por the comunidad para yes some track...
  

  Currently solo tengo una VM running, el operating system are CentOS 5.5 con Cpanel (Bind, Proftpd FTP, HTTP, Apache, PHP, MySQL, PostgreSQL, Exim POP/SMTP).

  
  

  Start VM al servidor para con 4 CPU y tengo asignado toda capacidad of 4 GB of RAM.

  El primer problema, desde consoled her VM, cuando los verifico caracteristicas sucede algo extraño, solo me detecta 3 GB of RAM 4 GB vez, in cambio, las CPU en las detecta correctamente...: s

  
  

  root@cPanel [/] # cat/proc/cpuinfo
  Processor: 0
  vendor_id: GenuineIntel
  CPU family: 6
  model: 26
  model name: Intel(r) Core i7 CPU 930 @ 2.80GHz
  step by step: 5
  CPU MHz: 2792.983
  cache size: 8192 KB
  fdiv_bug: no
  hlt_bug: no
  f00f_bug: no
  coma_bug: no
  FPU: Yes
  fpu_exception: Yes
  CPUID level: 11
  WP: Yes
  flags: fpu vme pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss nx rdtscp lm constant_tsc pni ssse3 cx16 sse4_1 sse4_2 popcnt lahf_lm nonstop_tsc ida [8]
  BogoMips: 5585.96
  

  
  

  Processor: 1
  vendor_id: GenuineIntel
  CPU family: 6
  model: 26
  model name: Intel(r) Core i7 CPU 930 @ 2.80GHz
  step by step: 5
  CPU MHz: 2792.983
  cache size: 8192 KB
  fdiv_bug: no
  hlt_bug: no
  f00f_bug: no
  coma_bug: no
  FPU: Yes
  fpu_exception: Yes
  CPUID level: 11
  WP: Yes
  flags: fpu vme pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss nx rdtscp lm constant_tsc pni ssse3 cx16 sse4_1 sse4_2 popcnt lahf_lm nonstop_tsc ida [8]
  BogoMips: 5596.34

  
  

  Processor: 2
  vendor_id: GenuineIntel
  CPU family: 6
  model: 26
  model name: Intel(r) Core i7 CPU 930 @ 2.80GHz
  step by step: 5
  CPU MHz: 2792.983
  cache size: 8192 KB
  fdiv_bug: no
  hlt_bug: no
  f00f_bug: no
  coma_bug: no
  FPU: Yes
  fpu_exception: Yes
  CPUID level: 11
  WP: Yes
  flags: fpu vme pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss nx rdtscp lm constant_tsc pni ssse3 cx16 sse4_1 sse4_2 popcnt lahf_lm nonstop_tsc ida [8]
  BogoMips: 5644.43

  
  

  Processor: 3
  vendor_id: GenuineIntel
  CPU family: 6
  model: 26
  model name: Intel(r) Core i7 CPU 930 @ 2.80GHz
  step by step: 5
  CPU MHz: 2792.983
  cache size: 8192 KB
  fdiv_bug: no
  hlt_bug: no
  f00f_bug: no
  coma_bug: no
  FPU: Yes
  fpu_exception: Yes
  CPUID level: 11
  WP: Yes
  flags: fpu vme pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss nx rdtscp lm constant_tsc pni ssse3 cx16 sse4_1 sse4_2 popcnt lahf_lm nonstop_tsc ida [8]
  BogoMips: 5607.93

  
  

  root@cPanel [/] # free
  total used free shared buffers cached
  MEM: 3107536 2982092 125444 0 107176 1984144
  -/ + buffers/cache: 890772 2216764
  Swap: 2096472 124 2096348

  El segundo problema, es el performance of los discos duros, creo estos deferred without normal son:
  

  root@cPanel [/] # / sbin/hdparm-Tt/dev/sda

  
  

  / dev/sda:
  Timing cached reads: 30332 MB in 2.00 seconds = 15203,59 MB / s
  Calendar of the disc in the buffer reads: 46 MB to 3,03 seconds = 15.16 MB / sec
  

  root@cPanel [/] # / sbin/hdparm-Tt/dev/sda

  
  

  / dev/sda:
  Timing cached reads: 30400 MB in 1.99 seconds = 15239,13 MB / s
  Calendar of the disc in the buffer reads: 102 MB in 3.02 seconds = 33,78 MB / s

  root@cPanel date [/] #.
  MIA © 8 jun 11:19:30 CEST 2011
  root@cPanel [/] # / sbin/hdparm-Tt/dev/sda

  / dev/sda:
  Timing cached reads: 28212 MB in 1.99 seconds = 14144,41 MB / s
  Calendar reads disc in the buffer: 16 MB to 3.06 seconds = 5.24 MB / sec

  In this case, are el momento mas carga del día.

  Con lentitud in los discos, siempre tengo a load of alto sin tener gran carga processes CPU y conexiones.

  Gracias por todo.

  Saludos.

  
  

  
  

  Hola willowmlg:

  Las Gráficas a pasarnos son las del disco duro performance, not the CPU.

  El modelo controladora lo puedes ver el doing click en host--> configuration--> storage adapters (haznos una captured todo lo that appears ahi)

  The cache aren't a SAN/NAS nivel, sino a solo disco controladora nivel. If no tienes hides the controladora en y los discos son el performance SATA will a ser muy pobre.

  A greeting.

• ESXi 4.1 installation problem

  Current running in an error message when you try to install ESXi 4.1 on a USB stick on a new generation of server. I use the VMware-VMvisor-Installer - 4.1.0 - 260247.x86_64.iso image. After that some research on Google, it seems that there might be a problem of compatibility of equipment? I tried to disable AHCI, unplug the WD drive, by disabling the two network cards. No one changed anything. I have a feeling that maybe that's a problem of compatibility of the mother/cpu card, but I'm not really sure. Any help would be greatly appreciated. I would like to decomission my old server as soon as possible!

  Here's the equipment I use:

  • ASUS P6T6 WS Revolution
  • Intel Xeon W3550
  • Kingston ValueRAM 6 GB (3 x 2 GB) ECC Unbuffered DDR3 1333 KVR1333D3E9SK3 / 6G
  • NVIDIA GTX260 (Just temporary until I get a cheapo card)
  • SanDisk Cruzer 2GB USB Flash Drive
  • Western Digital WD5000ABYS 500 GB (to be dedicated to a virtual machine)
  • LG GH20NS15 DVD burner
  • Adaptec 5405 (not yet installed, still in the production server)
  • 3 x Western Digital WD5000ABPS 500 GB (not yet installed, still in the production server)

  Here is a screenshot of the error message I get:

  

  ESXi is not able to recognize a NETWORK card in the system.   You can add something like an Intel Pro 1000, or you can read the article of oem.tgz on vm - Help.com for a driver.

• ESXi 4.0 NIC problem

  I have a HP proliant running ESXi 4

  The vnet0 is set to static IP address

  It is connected to a firewall

  The vnet1 is connected to the same firewall and there is a DHCP server provides IP addresses of

  10.10.10.10 for 10.10.10.250

  A virtual server connected to the (default) vswitch0 works fine, but the second server connected to the another vswitch using the second network card

  is having a few problems.

  I tested on a different network, as a test environment, now I need for this production and that causes a problem.

  Can someone give me an idea on what may be wrong with this configuration?

  Thank you

  Xavier

  Welcome to the VMware forums communities.  Is both connected to the same switch, HP network adapters or you have a LAN / DMZ or similar split?  Virtual machines on the 2nd vSwitch have a problem in obtaining an IP address?    What is the nature of the problem having these virtual machines?

• ESXi 3.5 Emb to Esxi 4 u1 upgrade problem

  Hello world!

  I spent a whole day trying to upgrade my esxi 3.5 integrated hosts and I have so far failed.

  Lets start from scratch:

  We have IBM BladeCenter full of 14 22XM IBM BladeServers, each of them has 2 GB USB flash inside with 28 Socket Enterprise Plus licensing for vSphere and VMWare Esxi 3.5 integrated INTL.

  I want to upgrade to Esxi 4 Update 1.

  Initially, I tried using VSphere Host Update Utility, with update.zip (this set, I downloaded on vmware.com, this is a package of upgrade to Esxi 4 update 1 installable of Esxi 3.5) but it failed with an error "input string is not in a correct format." OK, I studied later that VMWare VSphere Host Update Utility can update that Esxi 4 guests. Not very good news, but Ok, lets move!

  Then, I tried to update the vihostupdate in VSphere CLI utility. I installed VSphere CLI and tried to launch vihostupdate.pl and got an error this libxml2.dll dll could not be found. I updated variable of environment PATH with the path to the bin CLI directory and I rebooted the server. OK, vihostupdate.pl has returned to me for usage information. I have enered command to upgrade my esxi:

  vihostupdate35.pl - Server 172.x.x.187 - root username - password xxx-i b c:\update.zip

  But has encountered an error:

  Error to connect to the server " " https://172.x.x.187/sdk/webService': Connection failed due to a bad user name or password

  I did not forget that he had trouble with credentials of typing in command promt and have deleted password option to manually enter:

  vihostupdate35.pl - root - user name of the server 172.x.x.187-i c:\update.zip b

  And after you have entered the password, I got a new error:

  c:\1.zip unpacking...

  Impossible to analyze \metadata.xml to C:\Program VMware vSphere CLI\bin\

  vihostupdate35.pl line 321

  main::get_bundle_info('\metadata.) XML') called at C:\Program Files\VMware

  VSphere \VMware CLI\bin\vihostupdate35.pl line 236

  call main::install_update ('HostSystem = HASH (0x4f0fcc0)', '\metadata.xml')

  ED to C:\Program VMware vSphere CLI\bin\vihostupdate35.pl line 122

  Disconnection of the end

  OK, I have extracted update.zip in directory temporary and used another command:

  vihostupdate35.pl - root - user name of the server 172.x.x.187-i m c:\tmp\metadata.xml

  And have got an another erorr:

  does not apply to the host target (embeddedEsx 3.5.0 INTL)

  But I have found nowhere in the documents of VMWare or google that I can't be upgraded, esxi 3.5 embedded, ESXi 4 update 1. Can someone help me?

  I heard that there are some CIM providers that exist on ESXI embedded in order to better use the monitoring features, and I want to not lose them if possible.

  Hello

  Here, it was an admin with the same question.

  Components (to help people to google)

  -Material: HP ML350 G5

  -ESXi Embedded version: HP Embedded ESXi 3.5 Update 4 (U4) Build 153875

  -Host Update Utility: vSphere 4.0 (build 208111)

  Update package - ESXi 4.0 U1: ESXi - 4.0.0 - 1.9.208167 - updated - release.zip

  My workstation (XP-Finnish) and server (English WS03R2x64) had this same problem. Both had the locale "Finnish".

  I have changed the control panel of XP - locale - "Finnish"-> «English (US)»

  Workstation recharged and voila! Error disappeared and I can spend it with zip above.

  BR

  tlindi

  PS. Here is the link which gave me an idea how to workaround:

  http://KB.VMware.com/kb/1004767

• Dell PowerEdge R730 + ESXi 6 U2: licensing problem bought

  Hello

  I am trying to assign vSphere Standard licenses, I bought via Dell (and saved).

  Whenever I try to license, I get an error message:

  "The entered license key has no sufficient capacity for this entity.

  Has anyone ever had this problem?

  I have dual CPU servers (so I bought 4 licenses) that they are by CPU.

  VmWare does not seem to understand my problem.

  Kind regards

  Hello

  What model CPU do you have? https://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1019695

• ESXI 6.0 configuration problem: quick stats on {host} is not up-to-date

  I installed two Dell R530 3 days ago.

  Single-host, all right. The second appears in yellow on the Summary tab message: quick stats on {host} is not up-to-date

  Directly connected to the host shows no problem. The State of health is normal.

  Everything seems to work properly with respect to the collection of statistics.  But this yellow box annoys me

  I changed the settings, it works fine now.  In vSphere new its a little different look. You must add the word "config" in the key chain. It should look like this:

  config.vpxd.quickStats.HostStatsCheck

  config.vpxd.quickStats.ConfigIssues

  Enter the fields value: false

  Thank you

• 2 host ESXi più storage thanks problema HA Cluster

  Hello to all,

  Ho 2 Server esxi 5.0 che condividono tra di loro uno storage; Tale Server sono configurati in HA.

  MI era venuta voglia di testarlo my great is vado a mettere uno dei 2 server in maintenance mode vm accese restano accese e end not the io manualmente magnobeam quando, if not spengono. The magnobeam are all just migrate sull'altro server... not should rates tutto in automático? start e stop? Mi wrong?

  Grazie

  Hello to all

  invece di mettere in maintmode, prova a host station rates fargli

• ESXI 5.5 installation problem...

  I use USB to update my ESXI 5.1 to 5.5, but when installation of the files loading process stops at LSI_mr3.v00. Who can tell me why? Or is there something wrong with my ISO file, who can give me some value to check my ISO 5.5, as MD5?

  Most of the major suppliers is supported, check the hardware compatibility list http://www.vmware.com/resources/compatibility/search.php