Behavior of 5.5 very strange Ping ESXI

Similar Questions

• ESX4 missmatch incompatible cpu but very strange behavior of host cpu!

  Hello

  We have a very strange problem, I have 4 ESX host, each hosts have the same hardware and same configuration of BIOS (enabled on virtualization and no.-Execute Page Protection),

  but I'm not able to migrate some (my 25 vm´s 8) online to another host, offline no problem?

  do you have someone has an idea what for the problem?

  image of the error message wouled be attached.

  BR/mfg

  Andi

  Check on the CPUID mask for these virtual machines and reset it by default.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• Satellite Pro 6100 - battery acting very strange.

  As mentioned in the title, my laptop battery is very strange.

  The symptoms are:

  When the battery is flat after only 7-10 minutes he turns not, however if the battery is removed and placed in the laptop, the laptop will start as it has never happened.
  Not only that, but the bonus after the first can indefinitely until this that loaded into an OS and immediately after starting start the laptop stops due to an apparent lack of power, when there is power always, enough to do the same thing again. Also, the battery can still start even after being just in a freezer.

  This reacondioned back to normal battery or is this safe to use battery?
  Thanks in advance!

  Hello

  I guess that your battery is old like machines of this Satellite Pro 6100 and maybe it can't be charged more. In this case, your battery should be replaced.

  But even if the battery is faulty, you should be able to use the device connected to the power adapter.
  So even if the battery is removed, you could power the unit with the mains.

• Can someone help me with this problem of very strange wireless networking? (intermittent connectivity)

  So I'm having a very strange problem with my wireless adapter. (surprise, right?) Let me explain just what is happening here: I will use my computer, online, do a lot of things like play games or surf the web. Randomly, for no apparent reason, my wireless adapter disconnects the current network disconnect myself from everything I do. When I check my available wireless networks, I can't see a single network. This has happened to me for a while. When he started it first, I tried many things including the uninstallation of a reinstall of my adapter without success. I have to restart my computer to fix. This happens from time to time and has not stopped since the first occurrence. Originally, if I would try to find a network or uninstall/reinstall, my computer would be soft locking and I would be able to use the windows closed functionality, it would just hang out there indefinitely until I hard loaded. Now its being less skittish and let me do a reset software to fix, but it becomes very annoying. I know this isn't my router because all my roommates can still connect to the network very well, and the router will not prevent me to see many (15-20) wireless networks in the region. If someone can help me even by some light on what is happening, I would be very grateful, because I'm getting very frustrated by that. I reinstalled the map, he pulled for dust, etc. etc. It is not usb and its actions with the system. The Device Manager it says as a 802.11n wireless adapter PCI Express LAN Card, manufactured by LITE-ON TECHNOLOGY CORPORATION. Connected to the 4 PCI bus, device 0, function 0.

  Thanks in advance:

  Justeroo

  Try without commitment TCP/IPv6 (which is done by going to network connection > click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Very strange problem with quick mask

  Hoping someone can help me with a very strange problem that just started to happen when I enter the quick mask in PS CS5. Let me guide you through the problem.

  (1) I opened my image in PS, go in the Mode mask quick and 'paint' my image in translucent red with a brush (100% of opacity, brush, etc. normal mode).

  

  (2) once I fully painted my picture in translucent red, I leave the Quick Mask mode and the area outside the translucent red is selected. I hit M for the marquee tool, right-click on the picture I have just painted and choose 'Select inverse', which then selects everything within the translucent red area (note that I made this a million times over the years).

  

  (3) my image is now selected. In general, what I do now is cut (cmd + x) that selected the image and paste it into another canvas, generally where is my biggest project. Whenever I did it, the image cuts and fits exactly as it is seen and leaves an empty space in the original image. However, when I cut it now, it seems to cut a transparent version, leaving behind a transparent 'ghost' of the original image.

  

  (4) then when I paste the image cut in a new canvas, it is transparent as a default value.

  

  I checked the transparency of all the paintings, and they are set to 100%. As I already said, I cut from images of no solid media using the quick mask all the time and it's never happened before. In fact, I made this weekend and it has only just begun in the last hour, so I think I clearly something clicked or activated a parameter without realizing account!

  In considering this explanation, I hope someone knows what is causing my pictures to cut and paste transparent after that I used the quick mask. It certainly is driving me crazy!

  Any advice or assistance would be most appreciated.

  Thank you

  In your first screenshot the color of foreground in the Toolbox is not 100% black (RGB 0,0,0)

  Until you try the quick mask, press D to set the foreground on black (RGB 0,0,0)

• When I make a rectangle, the left and right edges are a bit fuzzy and thicker, then the bottom and at the top. It seems very strange and I don't know why that is.

  When I make a rectangle, the left and right edges are a bit fuzzy and thicker, then the bottom and at the top. It seems very strange and I don't know why that is.

  I made a new document (72 dpi, preview mode: by default) and I tried to see if it's the same thing on another screen, and it is.

  I thought that the problem would be with the 'align on the pixel grid' property but by activating / deactivating it doesn't matter. Maybe it's something with anti-aliasing? "Work of anti-aliasing" is checked in my preferences...

  

  Here's an example, zoom level 100%.

  The forms do not look sharp at all. No idea what this can be?

  Lieselot,

  Or you can try to switch between the GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.

• I work in a sensitive project where I have a specific slide which will not move forward. I created a click box that goes to the next slide, and it remains in the same blade if it is in a loop. Very strange. What might be missing?

  I work in a sensitive project where I have a specific slide which will not move forward. I created a click box that goes to the next slide, and it remains in the same blade if it is in a loop. Very strange. What might be missing?

  You can check the Advanced Interaction Panel? You have a note attached to the interactive objects in the simulation? If so, check the desired option Quiz, more specific preferences.

• Stamp tool behave very strange

  Photoshop CS5 running on an iMac with 10.8.4.

  For some time the stamp tool and the heal tool behave very strange, basically can not use them any more. When you use the stamp for example when I select the source of the past that a new image - a copy as if it created a new layer (but this is not a new layer) is created and its stuck on the mouse so when I move the mouse the whole picture gets dragged... strange. Can someone help and tell me how to solve this problem?

  Thanks Peter

  Fortunately, this is an easy solution...

  

• Very strange problem in planning

  All,
  
  I have a very strange problem, we have two cubes recipes and Wrkforce. There is basically two forms Web - one associated with Wrkforce and other recipes.
  
  In the Webform Wrkforce, users between rates of missing data and record forms and essentially running torque of BR that aggregates the entire enterprise, centre of cost, employee the individual Q and that inturn put up-to-date "Company absenteeism".
  Inturn 'Total company absenteeism' updates "Stored absenteeism" cube recipes.
  
  Labor
  Rates of absenteeism (value of the entry level 0)
  Total company absenteeism (dynamic Calc) ('Absentee rate'-> 'Company'-> "cost Centre"-> "employee")
  
  Recipes
  Stored Absenteeism (Stored) ("absenteeism stored" = @XREF ("_WFCube_", "Total absenteeism business")
  
  Now the problem is that all of a sudden the BR have stopped working... nothing changed... everything is still however "Absenteeism Total company" is not being calculated and thus stored absenteeism is not getting updated.
  
  Please can anyone suggest what could be the problem? Or where I can look for answers.
  
  Thank you
  
  N

  Double post:- failed to create security for the following users filters

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Very strange sound problem

  Hello!
  
  Well, I have a very strange problem with my swf, I hope you can tell me why.
  
  I have 2 sounds in my library and they are referred to as 'right' and 'wrong '.
  
  I'm starting a sound variable on top of my code
  
  var novoSom:Sound = new Sound();
  
  and every time I want to use, I don't
  
  novoSom.attachSound ("certo");
  novoSom.start ();
  
  problem is that when I publish my swf is all beautiful deployment sound perfect, but every time I use the SWF in my html in the Web page don't play at all, only if you are a loadSound event that I want to. any idea?
  
  Never happened to me before and im in a very close deadline, so any help will be great!

  If you load your swf file in another swf, use:

• Values very strange when you work with dates

  Hello
  
  I'm new with oracle, and I have very strange values in a query that includes dates...
  
  This is the query...
  
  Select fechapermiso, sysdate - fechapermiso
  of permits;
  
  SYSDATE-FECHAPERMISO FECHAPERMISO
  
  JUNE 1 09 31.676
  JUNE 1 09 31.676
  10 JUNE 09 22.676
  11 JUNE 09 21.676
  6 JUNE 09 26.676
  JUNE 5 09 27.676
  JUNE 5 09 27.676
  19 JUNE 09 13.676
  10 JUNE 09 730509.676
  JUNE 11 09 730508.676
  JUNE 27 09 730492.676
  JUNE 27 09 730492.676
  JUNE 22 09 730497.676
  JUNE 22 09 730497.676
  JUNE 22 09 730497.676
  JUNE 29 09 730490.676
  JUNE 27 09 730492.676
  JUNE 27 09 730492.676
  JUNE 22 09 730497.676
  JUNE 22 09 730497.676
  JUNE 24 09 730495.676
  JUNE 22 09 730497.676
  JUNE 24 09 730495.676
  JUNE 24 09 730495.676
  JUNE 24 09 730495.676
  
  
  Why am I getting all these huge values?
  
  Published by: user9521601 on July 2, 2009 12:19

  Hello

  Here's the dates to the first century (1-100 years).
  Appararantly, someone came in 2-digit date in an incorrect format.

  To turn them all on the corresponding date in the 21st century, add months 24000:

  UPDATE  permisos
  SET     fechapermiso = ADD_MONTHS ( fechapermiso
                               , 24000
                        )
  WHERE     fechapermiso >= DATE '0001-01-01'
  AND     fechapermiso <  DATE '0100-01-01';
  

  Published by: Frank Kulash, July 2, 2009 15:31

• Very strange behavior about variable naming with DataService.fill)

  I feel this behavior strange in LCDS 2.5, which refers to the variable naming for objects returned by a call to DataService.fill (). I was a simple destination with a Java adapter. the Java data object on the server side is defined as)
  
  test of the package;
  
  public class RepositoryObject
  {
  private String m_strObjectId;
  Private boolean m_bIsValid;
  private long m_lSize;
  
  [public poseurs and getters here]
  }
  
  The side Flex, the ActionScript value object is defined as follows:
  
  test of the package
  {
  [Bindable]
  [RemoteClass (alias = "test.)] RepositoryObject")]
  public class RepositoryObject
  {
  
  public var m_strObjectId:String;
  public var m_bIsValid:Boolean;
  public var m_lSize:Number;
  
  public void RepositoryObject()
  {
  }
  
  }
  }
  
  The definition of destination of SDS (in data-management-config. (XML):
  
  < destination id = "testDs" >
  
  < Ref adapter = "java-dao" / >
  
  Properties of <>
  
  < source > test. TestDS < / source >
  application of < scope > < / scope >
  
  < metadata >
  < property identity = "m_strObjectId" / >
  < / metadata >
  
  < network >
  < session-timeout > 20 < / session-timeout >
  < paging enabled = "false" pageSize = "10" / >
  < Butterfly-inbound policy frequency max = "ERROR" = "500" / >
  < political Butterfly-outgoing = 'REPLACE' max-frequency = "500" / >
  < / network >
  
  < Server >
  < fill method - >
  getObjects < name > < / name >
  < / fill method >
  < / Server >
  < / properties >
  < / destination >
  
  What I thought was in the debugging client, is the data returned by the service (I use the mx:DataService call) return objects with variable names do not match my definition:
  
  m_strObjectId becomes objectId
  m_lSize becomes size
  m_bIsValid becomes isValid
  
  I wonder why the name change? Basically the prefix "m_str" was stripped and capital "O" became tiny 'o' for my first variable, etc.
  
  For example, in a datagrid CellRenderer I couldn't refer to the returned value as {data .m_strObjectId}, but if I use {data.objectId}, it works.
  
  Any ideas why this behavior (which I find confusing and odd) would be greately appreciated.
  Robert

  How do you define your getters and setters? For example, for m_strObjectId variable, you have getM_strObjectId like getter or you getObjectId as getter? I suspect the latter.

• Very strange Sample &amp; Hold behavior on image signals

  Hello

  Here is video fragment on the behavior of my installation of video capture.

  IMAQ probes have always worked a little funny to me. It follows from the fact that the wire IMAQ that focus on you is a reference to the image, not the image data itself. So if you change the image above in the code here, this could be the glitter that you see. This node of feedback is to store the reference the previous iteration IMAQ, so if your code does something with this reference the previous iteration IMAQ, then it will appear like this.

  Try to create two different IMAQ images with different names and switching between those rather than change your unique IMAQ image reference. You can do it simply with IMAQ copy once you have completed your vision operations. I usually make a copy when I know I want to display an image, but will go back and change the original image during the next iteration.

• Behavior very strange pdf / really need help w this.

  When I install Adobe Reader, ALL pins icons & all links to other programs are modified in adobe reader shortcut.

  As soon as I uninstall Adobe Reader, program & shortcuts icons back.

  To test I also installed Foxit Reader and it worked normally for a while. Then he, too, mimicked the behavior of Adobe Reader.

  This, I infer that something is happening when I try to open a pdf file, no matter what player I use.

  I am up to date with the program-ESET NOD32 definition files.

  Currently, I can't read any pdf file.

  Running Win7 Home premium

  Thank you.

  Try this:

  http://helpx.Adobe.com/Acrobat/KB/application-file-icons-change-Acrobat.html

• Very strange behavior of buttons AS2

  Work on the site next http://www.socialanimal.tv/

  On the 'What we Do' page (click right) each company logo is bound using the Action Script 2 below.  Only the button of "Zipfizz" works well.  The rest of the buttons operate only very rarely.  I made a stock from a white box button then turned the opacity to 0.  Put one on each logo correctly size and gave them the names of instances of right.  If you click on the logo several times in different areas, that sometimes the link works.

  Someone has an idea of what's going on? I'm not very familiar with AS2, AS3, but the site built for me by another designer some time ago.

  
  CODE:

  Stop();

  zip_btn.onRelease = function() {}

  getURL ("http://www.socialanimal.tv/zipfizz", "_new");

  };

  oreilly_btn.onRelease = function() {}

  getURL ("http://www.socialanimal.tv/oreilly", "_new");

  };

  filter_btn.onRelease = function() {}

  getURL ("http://www.socialanimal.tv/filter", "_new");

  };

  voice_btn.onRelease = function() {}

  getURL ("http://www.socialanimal.tv/voice", "_new");

  };

  ace_btn.onRelease = function() {}

  getURL ("http://www.socialanimal.tv/ace", "_new");

  };

  scion_btn.onRelease = function() {}

  getURL ("http://www.socialanimal.tv/scion", "_new");

  };

  With the exception of the use "_new", which I think should be "_blank" for the help documents don't list "_new" as an option for the argument of the window, the code is also very well.  So if you change it and the buttons still don't work, then the problem is most likely with the way in which the keys are laid out in the file.  There should be only one keyframe for all that spans some length of the scenario that they serve at the breast.