Pinnacle Studio 9.4 closes down immediately in Vista
Pinnacle Studio 9.4 shut down immediately on the opening using Windows Vista despite having camcorder cassettes successfully downloaded. I have used this program for years on an old PC with Windows XP.
Can anyone help please?
This version of the program is not compatible with Vista: http://www.microsoft.com/windows/compatibility/windows-vista/Search.aspx?type=Software&s=Pinnacle%20Studio%209.4&page=1. You must uninstall it before it causes problems with your system and/or other programs.
Sorry, but to use Pinnacle Studio, you need to buy a newer version which is compatible with Vista.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Tags: Windows
Similar Questions
-
Windows Media Player encountered a problem while reading file he when Pinnacle Studio HD 14 is running
Hello
I have Windows 7 Home Premium. I installed Pinnacle Studio 14 ultimate test. When the Pinnacle program works-
a. when I run a WMV file there is no audio data.
b. when I rang a MPEG 2 file (720 p, 25 frames per second) OR a file m2t, Windows Media Player is not able to read the file and gives the error: "Windows Media Player has encountered a problem when reading what he gives.
c. when I close the program Pinnacle all right and WMP reads all of the above files correctly.
I also recently installed and uninstalled Corel VideoStudio X 3 of the trial. First Adobe Elements 8 trial is also installed on the PC.
I would be grateful yuour help solve the problem.
Thank you
Paresh
Hello Paresh,
The Pinnacle program is third party software that is causing the problem to occur. Pinnacle may be in conflict with your music files playing in Windows Media Player, that's why, I suggest you to contact pinnacle and check with them.
Windows Media Player 12 is probably to use the codecs used by pinnacle, which may be the culprit.
Aziz Nadeem - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
iPhone iOS 9.3.4 - I tried to close my bank account this morning. I learned that itunes Bill AED1 twice but was not deducted from my card again. They said that they can only close down the account, once itunes deducted from my card. Please notify
Have you added or changed the details of payment or the address on your account and received temporary store operating expenses: on the payment card's authorization in the iTunes Store - Apple Support ? If you have your card issuer should automatically remove charges within a few days or more
-
Cannot stop or restart my macbook unless I force close down
Cannot stop or restart my macbook unless I force close down
Download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information.
-
Camileo H30: I can't open .avi using Pinnacle studio 14
Nice day
I can't open .avi in my studio from Pinnacle 14 of my Camileo H30
Where is the problem and how resolution?
Camileo H30, PC with Win7.
Thank you.
concerning
/MH/Hi Macan,
And why you can t open the .avi file? Do you have a Pinnacle Studio error message or what is exactly happening?
Maybe you need to reinstall Pinnacle softwareBy the way: you can open the file with another program like VLC media player?
-
Pinnacle studio recognises no firewire port
FireWire connection?
Hi, I have windows xp in my dell vostro 1700, but as I want to capture A / V content in pinnacle studio does not recognize the firewire port, although the port works on Panel and the wire is good too. Could you please someone has the solution for this.thanks, naveed
Hi, I have windows xp in my dell vostro 1700, but as I want to capture A / V content in pinnacle studio does not recognize the firewire port, although the port works on Panel and the wire is good too. Could you please someone has the solution for this.thanks, naveed
http://www.pinnaclesys.com/publicSite/us/support/consumer+support/
-
Receive error 1327.Invalid Drive: H:\ installing Pinnacle Studio 14 download. I have Pinnacle Studio 12 installed. Pinnacle response: you receive the error message is not an error of Studio, but a Microsoft error message. This problem may occur if a registry key contains an incorrect value in a data field. The best thing to do in this case is to contact Microsoft and they should provide a solution for this error: www.microsoft.com. I found where this issue occurred with some Microsoft products, installation, but do not know how to fix once I get into the registry editing.
Can someone help me please?
Hello kthatgms,
Click the number of the KB article to bring up the following article.
KB Article ID: 327763 -you receive an "Error 1327. Invalid drive"error message when you try to install Office 2000He mentions Office but it should be the same for any program that you are trying to install.
Please reply back and let us know if this can help.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Error com Surrogate in Windows vista when you access Pinnacle Studio
Original title: using COM Surrogate error pinnacle studio 11. How to make
With the help of COM Surrogate error pinnacle studio 11. How to make
Hello
1. What is the exact error you get when you open Pinnacle Studio 11?
2. what type of system of your computer (32 or 64 bits of the system)?
3 is it with Pinnacle studio, or by browsing the folders containing video or multimedia files?
I suggest to perform the clean boot of your computer and check if that helps.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When you are finished troubleshooting, follow these steps to reset the computer to start as usual. See step 7 to article
Also, try the following steps and check to see if they help.
1. click on start.
2. right click on computer and select Properties.
3. click on advanced system settings, click on the tab advanced,
4. in the performance section, click settings.
5. Select the "Data execution Protection" tab and then click on the option "Turn on DEP for all programs and services except those I select".
6. click the Add button and browse to C:\Windows\System32\dllhost.exe
7. click on open. Click OK in the warning message.
8. click apply/OK.
-
I can not get connected to Windows Live Messenger.
Whenever I connect it comes up "Windows Live Messenger has stopped working, a problem caused the program to close down."
Can you help me pleasehttp://www.windowslivehelp.com/forums.aspx?ProductID=2
They will help you with your WLM questions when repost you your questions in the Forums above Windows Live Messenger.
See you soon.
Mick Murphy - Microsoft partner
-
My dazzle dvc100 WhyDoes not startcapture in pinnacle studios
Why my dazzle dvc 100 not working in pinnacle studios
Hi CJWX,
1. what happens when you use the dazzle dvc100?
2. you receive messages or error codes?
You can consult the following Pinnacle support link and see if it helps.
DVC 100 displays do not preview screen
Problems of capture with a Dazzle DVC 100
http://www.pinnaclesys.com/publicSite/us/home/contact+support
Hope this information is useful.
-
Pinnacle Studio 12 Ultimate will not properly organize under Vista 32 bit SP2
I have problems to Pinnacle Studio 12 Ultimate to work on my Dell Vista 32 b sp2 PC. After apparently installed successfully and a 12.1 update download, everytime I try to run it, the Pinnacle splash screen returns to about 70% and a Windows error message said then there was a problem and the studio file has stopped working. There is no additional information or any other message. I installed as administrator and disabled antivirus while doing so. Since then, I installed on a laptop Windows 7 to check that the installation disc is not defective and it works like a dream out there.
I tried a repair in Vista with the startup disk and uninstalled, corrected the registry and reinstalled but still the same problem.
So, I think to the settings of Vista on my PC - ideas please?
Finally sorted OK.
I have a card ATI Radeon HD2600XT, the driver was the cause of the problem and, despite the fact that there are later available drivers, I tried a bit and this one works:
8.791.0.0 driver version dated 10/26/10
Concerning
Nik
-
Digital Image Suite Plus including v10 Pinnacle Studio works only on Windows Vista
Orgnal title: Digital Image Suite Plus including Pinnacle Studio v10
I have been using Microsoft Photo Suite Edition on my computer with Vista. It has about 8 000 pictures on it. I made 3 DVD of our life story and have more than 1 or 2 to end it. Every time now that I try to open the program, the icon keeps circling and will not open anything. I have to turn off the computer each time to stop him. How can I open the program to create new stories of the picture?
Hi Bob,
(1) since when are you facing this problem?
(2) remember to make changes before this problem?
Method 1: Put the computer to boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.
Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
*************************************************************************** -
No sound when you edit video using Pinnacle Studio V12.1
Pinnacle Studio V12.1 running more on Vista with SP2. When editing film not files on Studio no sound, IE can not insert the speech or read his return. Have reinstalled Pinnacle again without success.
Another application running on PC is ok for her.Hi grey Nomad,
1 when was the last time it was working fine?
2. did you of recent changes on the computer?It seems that some settings within the program must be checked.
I suggest that you contact the vendor of the software for more information.
http://www.pinnaclesys.com/publicSite/us/support/consumer+support/For extra support, post your request in the forums of Pinnacle and check.
http://forums.pinnaclesys.com/forums/default.aspx
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Pinnacle Studio 16 does not load.
I was running Pinnacle Studio 16 on Windows 7 on my HP Pavilion, h80-1030 (2011 vintage) when I tried to update to Windows 10 and failed. I've learned since HP does not guarantee the success of an update of Windows 10 on any of their computers more than 2013. Installation attempt got the download Windows 10 and "is preparing to update" but bombed at the beginning of the installation. Windows 7 still works on my computer and most (not all) programs I have tested work but Pinnacle Studio 16 is the one who does not. He gets regarding the bombs and "init database. How can I get running Windows 7 yet. I tried to 'fix' programs and features in Control Panel, but it does not work. Is there a solution to this problem? Would be to uninstall and reinstall work?
Hello
I realize you are trying to run Pinnacle Studio 16 after a failure of the upgrade of Windows 10. However the failure of the upgrade should not affect any other program running.
As you have already tried to fix the program, you can try to re - install the program and see if it works. If still you are facing a similar question, you try to install a program I compatibility mode.
To install the program in compatibility mode, you can read the following article.
http://Windows.Microsoft.com/en-us/Windows/make-older-programs-run#1TC=Windows-7
Also, please make sure that you do not have the system requirements to install Pinnacle studio 16. For more details, please see the following article.
https://support.Corel.com/HC/en-us/articles/216515748-Pinnacle-Studio-16-system-requirements
Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.
Thanks and greetings
Sarandeep S - Microsoft technical support. -
Error 1325: Document is not a valid short file name during installation of Pinnacle studio 12
Original title: when I try to install Pinnacle Studio 12, I get "error 1325. Documents is not a valid short file name. »
I updated to windows 7 using the installation disk option and it has not fixed the problem. I did it after trying several "solutions", with the exception of registry changes, found on the web, including the SFC/scannow. Nothing has worked so far.
I am pleased that you have installed Pinnacle finally.
"As for the execution of this command, make sure you run the command prompt in right-clicked on it and selecting Run As Administrator" option, and then type, then press enter
NET user administrator / active: No.
Restart or log off.
Maybe you are looking for
-
I have iPhone 6 64 GB iOS 9.3.1 my current iPhone screen goes black, but sometimes it works properly, no special reason?
-
How to make the text bigger in youtube! Cubs in youtube!
I made the largest text where google search arrives! But when I go on youtube the text is much tinier and I 65 to cataract and I can't read the text at right! How to make the text bigger in youtube? Thank you very much! I tried everything, but nothin
-
I can't open Firefox. Home page comes up, I get just the reporter Crash asking me to restart/quit but every time I do the same message always comes back. I was not able to use Firefox for days now.
-
Clean the remains of Boot Camp?
Hello So I don't know if it's the right category, but long story short... I gave up trying to dual boot windows 10 on my Macbook Pro... apparently the 2009 version does support it which is probably why it has been such an a giant pain, anyway, no mat
-
Card mother H-IG41uATX HP works @ 1066 Mhz with single 2GB 1333 Mhz RAM
Hello My card mother H-IG41uATX HP works @ 1066 Mhz with single 2GB 1333 Mhz RAM (Apacer PC-10600) @ 7-7-7-20. BIOS is Version 6.08, 07/07/2011. BIOS it detected as PC-8500. CPUZ shows like PC-10700 work clocked at 533 Mhz (= 1066 MHz DDR). The proce