DVD - RW DVR-K16S can no longer write to CD.

Similar Questions

• Sam L20-183: Pioneer DVD - RW DVR-K16S cannot read DVD

  Hi all!

  I have the Satellite L20-183 with Pioneer DVD - RW DVR-K16S player. This is a new computer, I bought it a week ago. The problem is very strange, after several days of use of the laptop drive does not read or write DVD! The process of reading or writing with the CD is excellent. Who is wrong? I didn't change the firmware or something like that. I don't really know what to do. I can't reinstall the system since the Toshiba Recovery dics's on DVD and it won't start...

  Help, please

  email: [email protected]

  Artur

  Hi Artur

  Try to remove the drive from Device Manager and reboot your device. After restarting the OS should reinstall the drive. Then try to play the DVD.
  Well, I also read a few topics in the forum a similar car problems and it seems that you are driving can has a calibration problem. In this case, you should replace the disk. I think that it isn't a reason to be angry. Your device is under warranty and all replacements must be done for free.

• Pioneer DVR-K16S can no more read on DVD-R media

  I just updated my BIOS a few days ago. I don't know if it is related to that, but my DVD player can read either any media DVD-R or DVD - RW.
  He can still read DVD + R and DVD + RW as it was.
  I tried to find a firmware for my Pioneer DVR-K16S but did not.
  Please try my find the firmware I'm looking for help.

  And what model of laptop you have exactly?

  It seems that ODD drive has a problem of calibration and impossible to define the objective in the right position. What do you think about this?

  May is the time for a new drive.

• Can no longer write or even CD/DVD format. "Error Code COOD10DA".

  Vista 32-bit, with AVG security and using TDK DVD + RW.  Tried to burn a file from inside Media Player, received the message "error Code COOD10DA".  Downloaded and run the Fixit utility, he said he had resolved a problem concerning "media being not not accessible writable", then invited me to format a data disc.  Returned with the message "unable to complete the format".  Can read disks OK.

  Hello

  1. Are what "Fixit utility" you referring?
  2. The problem occurs with all files you try to burn and with all the DVDs you are using?

  We get this error code whenever there is dust on the surface of the disc, the recording speed is high, interference with the programs that are running in the background.

  You can follow the steps mentioned below and check.

  You got the C00D10DA error message when you use Windows Media Player.

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D10DA&ContextId=30&OriginalID=8004021B&LC=1033

  See also:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Hope this helps and keep us informed if you need help.

• I can no longer write photos from my computer to a CD - I copied on CD for years - but have cleaned my computer. I deleted something?

  I always copied photos from my mobile - emails etc. on my images on my computer and then copied pictures on a CD to take boots print copies.    In the last month, I can write is no longer on a CD - I have tried new CD - emptying recycle bins, clean generally - but not yet possible.  Before this is is past that my computer has been cleaned up a lot - maybe I have deleted some software?  I really miss being able to do that.

  Hello

   
  • What application are you using to burn the CD?
  • You receive an error message?
  • CD RW drive works fine for other CDs?
   
  I suggest that you use Windows Explorer to burn the pictures on the CD and check if it works.
   
  Description of the record to CD - R and CD - RW in Windows XP
  http://support.Microsoft.com/kb/279157
   
  How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP
  http://support.Microsoft.com/kb/324129
   
  I hope this helps!
   

• Pioneer dvd rw dvr - k16 ata device.

  missing or damaged driver code 39.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi mybugatti,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. you have any third-party DVD burning software installed on the computer?

  Method 1

  See the Microsoft article and run the fixit tool available below.

  If the fixit tool does not help, then try the manual steps, mentioned in the article below

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Method 2

  If the previous step fails, then I suggest that you update thefirmware of the drive and check if it works.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can no longer open a project - and readers of the report accident there?

  Hello

  I worked on a project for a few months and just completed phase yesterday, has sent again and produced a bunch of DVD. Now, I can no longer open the project. It crashes every time, like auto save copies and save copies. I have to go back to a very old copy that works - they work if I go far enough - and do a lot of restructuring.

  Y at - it someone who can read a report for you to try to determine the problem?

  Thanks for your help.

  Kind regards

  Jessica Vecchione

  PS. Happy New Year!

  Yes, it happened with the film. Most of the cameras allowed to 'see' the film advance, if they released the limp, as the rewind crank would turn too. I knew better, but makes a shot at Williamsburg, Virginia, and one body was not moving. I have checked no - hurry, or too little coffee early in the AM? Fortunately, I was shooting with 3 Nikon, so was the film of two of the three for the start (missed some of the WA establishing shots), and when it was time to recharge, I checked the body #1 - Oops! Who corrects and got the images (returned on my own for a few of the shots WA) and learned a lesson, that I thought I knew - independently verify the rewind crank.

  Hunt

• Satellite M70: DL - DVD are not recognized on Pioneer DVR-K16S

  My DVD player does not recognize DL media (this device is compatible DL) so I can't burn this type of DVD, that someone can tell me why? all other media CD and DVD works great. I can write and read, but with DL, I can't write because this type of media are not recognized. I tried to find information and driver and firmware on the internet, but I can't find note on DVR-K16s pilot.

  I have a satellite M70

  Best regards.

  Hello

  According to the specifications of the Satellite M70, it should be possible to burn the DL DVD.
  It's not easy to say why you can't burn your DL media.
  You know that not all readers to support all of the CD and DVD.
  A friend of mine tried to use DL media. There were also some problems with another drive.
  I recommend that you test some DL media.

• MY DVD - RW DVR-112D ATA DEVICE IS ONLY PLAYBACK DVD VIDEO (EX MOVIES). BUT NOT READ ANY OTHER TYPE (E.G. SOFTWARE).

  MY DVD - RW DVR-112D ATA DEVICE IS ONLY PLAYBACK DVD VIDEO (EX MOVIES). BUT NOT READ ANY OTHER TYPE (E.G. SOFTWARE). Everytime I put a dvd movie it plays automatically, but any other type of cd it will say insert disk. One has had this problem?

  Hello

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ----------------------------------------------------------------------

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite A110 - Pioneer DVD - RW DVR-K16A is broken

  Hello I have a Satellite A110 and my DVD is broken.
  HY gives a problem with my station.

  It is said that the currency program not load in memory.
  It is possible that the pilot program is damage?

  I have a Pioneer DVD - RW DVR-K16A.
  But I did not now what to do, can someone help me?
  Marco GR

  Hello

  First of all, you should check in Device Manager if the CD/DVD drive can be recognized correctly. If there is no yellow exclamation, then the software (driver) does not run correctly!

  In such cases, it s advisable to remove the ODD (CD/DVD drive) Device Manager and restart the laptop. After restarting again the operating system should recognize and must initialize the disk again.

  Please check first!
  Best regards

• under vista and can no longer connect

  under vista and can no longer log in and get a password prompt.  I can also select advanced boot (F8 or F10) on start up options.  I got to the page command prompt but can not select an option.  I also learned to the Restore page of the system (after the electric bike), but after the restore I have the same problem. How to a command prompt page or the page system restore where I can choose the date of the restoration?

  Hello

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• DSA files: I can't watch avd files from a dvd disc. How can I do this?

  I can't look at avd files from a dvd disc. How can I do this

  DSA files are 7 BACK.  I spent nearly 45 minutes looking for any program that would read this type of file and could happen to any (see below - it may as well have been none).  I don't know the reason, you can't look at AVD files from a DVD disc is because he has not installed software capable of reading this file type.  None of the major software look at programs to support this type of file and I could not even find a 3rd party single program (freeware, demo, shareware or ware) that claims to be able to read this type of file (and I spent more than 45 minutes, looking in all the obvious places: www.download.com,www.tucows.com, Bing and Google). I could also find no program which converts the AVD files into a format readable by standard viewers.

  Well, this is not quite correct.  I found the folllowing: http://media-geek.com/index.php?option=com_docman&task=doc_details&Itemid=142&gid=160 but I do not qualify to become a member (and doubt do you either) and the program is not in the home page of the manufacturer list (which means maybe he is no longer available or taken in charge) and it does not say what operating systems it is compatible with (so I don't know if this works with Vista even if we could get at the point of download it which I doubt somehow).  I'm not even sure that it is applicable for the DVD you have.

  Indeed, if it was already possible with earlier versions of Windows or Windows software, I do not think it is no longer possible.

  You can search by yourself and I wish you success.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Customer can no longer open our wallets

  I'm a writer/trainer. Today I received an email from our support group. An existing customer has recently updated the user workstations all the (as I understand it - client allows no FlashPlayer to be installed in environments VM ware users use as their desktop environment work - recently started using parts of Lenova Tiny running virtual machine). So they can no longer open our wallets that we delivered to them since 2010. Any ideas? Workaround solutions? Thoughts? Help! Thank you.

  I found a solution... use Google Chrome, not Internet Explorer and go to the Adobe web site. Search for Flash Player.  Install the Flash Player from here.  I can now open portfolios very well!

• Publish on the hard drive is no longer writes XMP files?

  To save my raw files and metadata XMP to my NAS, I have a hard drive configuration Service post and pointed toward the mounted directory. He was works perfectly (writing of CR2 files with XMP), but from the most recent update (v3.4.1), it seems that LR3 is no longer writes XMP sidecar files when I publish on the hard disk through this service. I haven't changed anything on the service configuration, and I can't find any useful options in the service settings.

  This change for someone else? Why would he suddenly no longer export the XMP files with my raw CR2 files? Other than me having to manually copy the files from my cataloge, nobody knows how to fix this so I can get my simple drag & drop publication backup back?

  Thanks for any help,

  Mike

  Mike,

  Sorry, I guess I copied the wrong link in my answer for filing a bug report. It should have been this one.

  In the meantime, I've created this bug report for this issue.

  Beat

• Help! Can no longer access Messages on desktop

  I can not longer connect to app Messages on MacBook Pro - after entering the password of my Apple ID, I get the following error:

  Can not connect to iMessage.

  An error occurred during activation. Try again.

  When to jump the journal, I can still see my old son of message, but all the names of the recipients are red.

  And I can't delete even the "Apple ID (inactive)" in the preferences, as delete is dimmed.

  Is there another place where I should be looking to change the account?

  The messages clearly remembers of my Apple ID, just won't let me log on more...

  [Note: Messages still is working on a second MacBook Pro 10.10.5 running, using another Apple ID]

  Hello

  Cannot delete the Hello account and iMessages.

  The iMessages can be signed Out (or the account disabled by unchecking the "Enable this account" box).

  The Apple ID used for the last enduringly but the password will be blank.

  The account Hello find "Buddies" on your local network that also use Messages or iChat with Hello account activated.

  IF you enable the guest account or create a new user account Mac (System Preferences > users and groups) and connect you to work the iMessages account here?

  (this will tell us if it is the computer (or possibly the server end) or your Mac user account).

  

  20:43 Friday. 26 August 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)