Pipette and fill tools does not?

Similar Questions

• Fill tool does not, the eyedropper selected instead

  Hello world

  I have a problem that I have not been able to solve on my own.

  I am currently in photoshop CS6 (13.0.1) on a 64-bit windows 7 and cannot use the fill tool. Whenever I try to use (either via the keyboard shortcut, or manually via Edition > fill) the usual dialog box appears at all, and the eyedropper tool is selected instead.

  
  

  Therefore, I can't do anything other than use the pipette. Cannot select a layer cannot do any action, can not pass tools -until I have use alt + F4.

  
  

  Even when I'm not all shortened re-branded to the fill tool, I have this problem, so it is not related to another action assigned to this same shortcut.

  I am up to date with my photoshop and can't see what's wrong with the tool. I tried looking for a similar problem in the forum, but none seem to match.

  Thanks in advance for your help.

  The dialog box would be off the screen?

  Have you tried to restore your preferences again (after checking all the presets custom like stocks, models, brushes etc. have been saved)?

  Photoshop: Basic troubleshooting steps for solving problems more

• Panels and pen tool does not.

  Hello. I use CS2 since I am not willing to spend so much money on a correct version.

  The CS6, I used once, the pen tool worked perfectly and I created this beauty:

  http://prntscr.com/9tvv55

  However on CS2, when I try to make curves, it automatically does this when I release:

  http://prntscr.com/9tvvmn

  I can't stroke the path, I can't do anything. It does this by itself.

  For my second problem, when I switch from windows to Chrome, for example, does it:

  http://prntscr.com/9tvwlf

  I know that I could push the button cut but it's embarrassing and I have to break habits.

  I have had absolutely no problem whether at CS6 help so I want to be able to use CS2 as comfortably as possible CS6. Help is greatly appreciated.

  Thanks to a bouquet.

  Would that your using the tool pen mode forms when you use path mode

  

• Why my Bucket fill tool does not recognize the gray lines?

  First of all, I'm in RGB, with Photoshop Elements 6.  I am filling an area of the business (the building on the left) Center in my drawing, but it goes both the door lines and the text on the building.  With the center of students (the building on the right), it's the same thing with one of the gray lines (but not the text).  And it's under a layer (used to be composed of several layers, but have been merged into one).  What should I do?  Here's a picture of him down below:

  

  A value of lower tolerance of about 3 to 6 should work better.

  Tolerance allows you to adjust the sensitivity of the paint bucket tool is of different colors.

  

• SHIFT key and ellipse tool does not

  Can't do a perfect circle in CS5 by using the SHIFT key. Does anyone else have this problem?

  You might try this one:

  http://forums.Adobe.com/thread/666455?TSTART=0

• to refine my question. The Lasso tool does not work.  When I select the content aware lasso shrinks and nothing changes.  Help please.

  to refine my question. The Lasso tool does not work.  When I select the content aware lasso shrinks and nothing changes.  Help please.

  A simple reset will often be the case if a tool becomes awkward. Go to this link, then select the lasso tool:

  Difficulty of tool

• Quick selection tool does not work after last update Photoshop CC

  I've updated to the latest version of Photoshop CC, and the Quick Selection tool does not work. I am able to make a choice, and then when I try to make multiple selections, I receive the ball well filled, and then nothing is selected.

  I have preferences in the performance, the value Panel "Big & Flat" in the historical and 'Basic' Cache in the settings of the graphics processor. Thus, the operating system is up-to-date.

  I restarted my computer, and now it works. Don't know what it is, but it works fine now.

  Thank you!

• As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  This may be caused by the Tab Mix Plus extension

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can try to install the latest Dev version of Tab Mix more if you use this extension.

  See the sticky on the forum of Tab Mix Plus:

  • http://tmp.garyr.NET/forum/viewforum.php?f=3
  • http://tmp.garyr.NET/forum/viewtopic.php?f=3 & t = 15740

• The top of page 1 1/4 inch has no answer whin you click on it. As in this page, sign in or register and other app does not work. in English

  The top of page 1 1/4 inch has no response when you click it. As in this page, sign in or register and other app does not work. in English

  This problem can be caused by that extended the Yahoo! toolbar or extension of Babylon also well down and covers the top of the browser window and therefore links and buttons in this part of the screen not clickable.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• Satellite L305D-S5895 - keys to functions and the wifi does not work with Win XP

  Hello

  first sorry for my English

  I bought a Toshiba Satellite l305d s5895, with Windows XP, I need a software, but the function keys does not work.
  So I need a driver, but I can't, and wireless internet does not work.

  > Where could it find special XP BIOS?
  In my opinion, there is problem because most threads here are on the European laptop models. then come to question United States. Toshiba Europe and Toshiba U.S. do not work together and each of them is responsible for own models and provide support for specific country notebooks models.

  For most models, so here in Europe Toshiba has offered two BIOS. We were already on the delivered Vista laptops. The Toshiba page download available BIOS for Windows XP Home edition. in most cases, it was version 5. XX and this BIOS was designed to support public services and specific tools of Toshiba. For example, all the FN key features was only available with this BIOS WXP.

  So if any of you have laptop model US they would see how the solution with Toshiba U.S. or US forum under http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1

  Bye and good luck!

• (XP): cure for Add Remove Programs tool does not, error msg: "DllRegisterServer entry point was not found.

  [(Windows XP) looking for a cure to issue:]

  ["Add Remove Programs tool does not open, cannot access area Add Remove programs on the control panel."]
  (After typing regsvr32 mshtml.dll then press Enter :)
  met the following error message:
  "mshtml.dll was loaded, but DllRegisterServer entry point was not found.
  This file cannot be saved. »
  How can I fix above error message?
  -Alan.

  Hi Alan,

  ·         Did you do changes on the computer before the show?

  ·         Are you referring to an article in Microsoft?

  Follow these methods.

  Method 1: Follow the following steps:

  (a) click on Start, run, type cmd and press enter.

  (b) in the command prompt, run these commands:

  regsvr32 Jscript.dll

  regsvr32 Msi.dll

  regsvr32 Oledb32.dll.

  regsvr32 Msado15.dll.

  regsvr32 Mshtmled.dll

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 3: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• The cutting tool does not work after windows updates.

  I read answers to similar questions about the failure of the cutting tool.  I use the tool cutting regularly and I think it's a fantastic tool in Windows. I have Vista Ultimate and all my windows updates have managed: none were not installed correctly, and I did not install new programs or hardware.  It seems that Microsoft knows the snipping tool does not - why can't they simply provide an update patch to correct the problem, rather than make us do all the work.  I don't have to go through hoops of restorations etc to get something it seems work was broken by updates.  I'm about to go to a Mac.

  It worked for me! Thank you!

• Unable to turn on the window Defender, even after that I click on activate the defender of the window. THA page with the tool does not appear...

  Unable to turn on the window Defender, even after that I click on activate the defender of the window on my window vista home premium... The page with the tool does not appear...

  If you have
  one of the following AV, antivirus, programs installed, it will stop your
  Windows Defender. Purpose of these AVs have their own advocates. 2 defenders
  on the same machine will create conflicts.
  Bottom line: it's ok.
  It's normal.
  List of AVs which will stop Windows Defender

  Norton
  McAfee
  AVG
  Microsoft Security
  Essentials

  If you do not have the
  above AV programs, here's how to do to restart Windows Defender:

  Start button > in the search box, type Services > press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows
  Defender > click Properties > to
  Startup type, click on the pointer to the right and select automatic
  to the service status, click Start
  Click OK when finished.

• Print screen with Snipping Tool does not.

  Print screen or capture tool work.  They worked very well in the past, but now neither one works.  Back to zero does not solve the problem.

  Screenshot doesn't seem to do anything in the copy buffer because even if the block occurs, nothing sticks in.

  Snipping Tool just shows a black with a red around him border screen, instead of the actual screen shot (no matter the option I select IE free Style or whole screen, etc.), I have Vista Home Premium with all service packs.

  Thank you

  This should be the final resolution to my problem of Snipping Tool/print screen:

  1. I downloaded and ran the Malwarebytes program as recommended.  And BTW, I don't see this recommendation here.  I'm fairly new participant in Forums, so maybe there's a reason that I see here this recommendation I don't know.  The Malwarebytes has really done his job and even if I run MS Essentials program found Malwarebytes 25 hits of Mal-ware on this PC.  Once I have it fixes these problems, the symptoms of my problem of Snipping Tools became less consistent.

  If Malwarebytes fixed part of the problem with the Snipping incroyables.* *.

  2 but the final resolution is that it turns out that there is that one Internet site where the tool captures will not work and it is my Bank.  I know that my Bank suggested I run a program called safety report.  It's my theory that is my bank site or report has something programmed into it that prevents screen either with the tool to capture and print screen captures.  If I go into my bank site with Internet Explorer or Mozilla Firefox, the Snipping Tool will not work.  However, the Snipping Tool works everywhere else.  It's all the other websites and in other programs.

  The Snipping Tool does not work on my banking site (probably because of the REPORT) and maybe it will not work on other sites closely to secure *.

  Thank you very much for the help.

• Problem of the eclipse - signing tool does not

  Hello

  The Signature tool does not load in my copy of eclipse. I'm running the beta version 7 in Eclipse Helios. When I select 'sign with Signature tool... ". "in the menu, nothing happens. The only chance I have is to try to 'All together', but that works only intermittently.

  Any ideas?

  Thank you

  I had the same problem: you need to select your project in the Project Explorer, and then right-click, select Blackberry--> sign with signature tool...