Pipette / measure Glitched

Similar Questions

• Measure with a glitch?

  I'm having a problem to measure objects in Illustrator CC. The measure appears only in decimal, and when I try to change the value it changes all the object. Any unit of measurement, I chose, it comes up with anyone.

  Everything appears as 1000.00000 (with many zeros after a point, as the picture below shows)

  

  I tried to change something on the preferences, but nothing happened.

  Could someone help me?

  Weight of the race is pt 1000,0000

  See the last message

• OSX10.9.5 - glitching finder

  Hello

  I have a mid 2011 27 "iMac with ios10.9.5 installed. I also have a wacom cintiq 13hd attached.

  Last week, I noticed an error with my finder.

  After the opening window, close, minimize, maximize the left top of the buttons don't work - they are greyed out.

  Clicking on a file or folder immediately will rename instead of highlight.

  Can not lock or open the file/folder.

  Sometimes the window opens and the files/folders can not be seen / are missing

  Ctrl clicking on file does appear under menu pour.5 seconds before disappearing.

  Finally - it becomes completely insensitive.

  Quiting force reset finder and normally gives me a few minutes before glitch on new functionality

  All the functions of the keyboard work properly in other programs

  I have not taken measures, as I found it hard looking for this issue online.

  Any help welcome.

  Thank you very much

  You have Google installed Player?

  Finder-fix problem of Google Drive

  May be a corrupt .plist.

  Make a backup, preferably 2 backups on 2 separate drives.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library. Then go to Preferences/com.apple.finder.plist.  Move the .plist on your desktop.

  Relaunch the Finder by restarting the computer and test. If it works fine, delete the plist for the office.

  If the same, return the .plist to where you have it since, by crushing the latest.

  Thanks to leonie for certain information contained in this.

• NEITHER USB-6343: erratic low frequency 1 counter measures

  Dear members,

  I'm looking for help with a measure of low frequency counter.  I tried to make it work for a week or two, but I keep getting erratic measures.  It will read the rpm properly for a second or two and then it will give a ridiculous value on the order of 10,000 times the correct value. I can not get a constant value.

  I use a DAQ series X NI USB-6343 multifunction with Geartooth Honeywell GTN1A111 sensor. I enclose a sketch of the wiring configuration.  I think that it is correct.  Sensor output to the door of the meter.

  To try to solve this problem, I hooked the sensor to an analog input channel to make sure that I was getting a TTL signal by sensor.  I noticed every once in a while I'd see a glitch of little noise in the signal and I guess that's what is causing my problem with the meter.  I inserted two waveforms of the sensor signal (one with the clean signal) and the other with the glitch of noise.  My understanding of a TTL signal meter channel will examine LO voltage when it is below 0.8V and HI when it is larger than 3.8V.  So I really do not understand why these little glitches could be the cause of the problem because they are well below and above 0.8V and 3.8V, respectively.  I think that the noise comes from a frequency converter used to drive the engine.  I tried the system as much as possible of the Earth.

  

  

  I guess I'm looking for another approach.  I could potentially use a digital filter to help with noise? The glitch is in fact the problem or I forgot something.  The VI in question is attached.

  Thanks in advance,

  Mike

  Have you tried to set up a digital filter yet?  Obviously the seeds are collected as an additional transition (the method of low frequency counter 1 measure the period and then reverse, so a short glitch would record as a very high frequency).

  You can enable the digital filter with the following property node:

  

  Min pulse width is guaranteed pulse past the filter, so it should be low enough for the real signal is guaranteed to pass through (but high enough so that the glitch is always rejected).

  Best regards

• Incorrect values of frequency quadrature encoder measurement

  Hello

  I use a rotary encoder with the slice has and tranche B and an exit on the ground, attached to an M - series SCB-68 that is attached to an NI PCI-6221.

  I use the soul hollow low frequency Freq 1 Ctr.vi I added some time a loop to and is attached below.

  I tied to the 9 PFI for the measurement of the frequency of the phase a. (I have attached to the floor to phase B 10 PFI and D GND).

  When I run the VI I get a rate that fluctuates wildly to reach as high as 2285714 Hz frequencies.

  I used a multimeter between phase has and ground wires and got a rate of 118 ~ 122 Hz which corresponds to the number I want.

  Should what steps I take to get the correct frequency in LabVIEW?

  My ultimate goal is to find the speed of ROTATION of the encoder that has 64 PPR.

  Thanks for any help you can provide.

  Hi pd1234,

  You probably pick up glitches on transitions (encoders tend to be quite noisy signal sources).  These seeds would record in the form of very short impulses, which may be calculated to represent very large frequencies.  To resolve this problem, you must enable digital filtering (see the user manual of M series):

  

  The foregoing will cross any superior to 6,425 impulses, but will ignore the little glitches that you probably see.

  Best regards

• UP2716D of STDS to glitching 2408WFP

  Hi all; noob here so let me know if I get it wrong...

  I recently bought a UP2716D as a main screen to complete my aging 2408. It has run for a GTX760 on DP to the entry on the 2716 AMD then DP to DP on the 2408. Had a lot of problems to the 2408 to hold it is the native resolution, however I have random faults occurring on the 2408 and a row of pixels at the top of the screen constantly glitching.

  Main reason I want to use STD's because my job requires 2 screens and I am swapping a laptop work plan / docking station to my office on a regular basis.

  DP - DP cable I use is quite old (probably came with the 2408) but has never before had any problems. Find new cables to test is virtually impossible where I live that it seems people here are still rocking with the odd HDMI VGA connectors thrown in for good measure.

  I understand that this problem is not unique to me, but I wonder if anyone can suggest a way forward?

  Thank you very much!

  We never tested the UP2716D STD Garland on the old eight years 2408WFP. To start, you get the most recent DP Dell to the cable of the RFP and test to see if your old was the culprit.

• Pipette does not

  The pipette function when you click on the seeds out, not the tool fill color, however, function when changing the color to use it glitches out and random colors of spam. It's the Flash CS6, and unfortunately I can not provide a video.

  Yes, this is a known bug that has been fixed in later versions of animate it. Unfortunately, given that Flash has been deprecated it won't be fixed in Flash CS6.

• Sanitation with glitch recovery quiz

  I ran across a little problem when you use consolidation in some quiz slides using also the option to take a quiz.

  If you have a file with questions that use sanitation and the user gets a failing grade, click the restart quiz button and correctly answering a question with sanitation, return to the Quiz button on the slide of content reorganization does not send the user to the quiz. Instead return to the Quiz button simply sends the user to the next slide. Remediation work correctly the first time that the user corrects before omitting the quiz, but restoration will not work correctly when they are a new attempt.

  The file link below is to the Captivate 7.01 file

  https://DL.dropboxusercontent.com/u/23385824/RemediationFailure/RemediationGlitch.cptxhttp ://

  If you do not have the recent 7.01 update you can view a published version from here, the https://dl.dropboxusercontent.com/u/23385824/RemediationFailure/RemediationGlitch.htm file

  The first time by consulting the file incorrectly answering the first question so you can see that the restoration works. Reorganization of the since Captivate does not allow to fail a question by corrective measures, you must select the correct answer to the first slide of questionnaire in order to get to the next question. If you answered the second quiz slide incorrectly the quiz fails and displays the retry Quiz button. After clicking on the button try Quiz do not correctly answer the first question to be sent to the first slide for sanitation, so you can see that by clicking the next > button will send you to the next slide instead of back to the quiz.
  

  
  

  I tested this out in Captivate 7 and 6 and the glitch exists in two versions.

  Hi Cozmicone,

  Thank you for reporting the issue. This is a bug in Captivate SWF publish. Publish HTML5 seems fine.

  Thank you

  Sexy.

• Glitch in the line of brush when it is drawn small?

  someone at - it never gets a glitch in the line of brush after you draw and join the ends?

  Like this

  

  drawing the line of brush around the face of the Moon, you can see a straight line on the far right, it's to a small size, the above measures are in millimeters.

  It seems to only happen when I draw shapes in small sizes...

  See here: http://forums.adobe.com/message/2621733

• How to measure a radius of a rectangle in AI CS5 pls

  Can someone please tell me step by step how to measure the radius of the corner in a rectangle with rounded corners it please?

  Most likely, I need the base for a new user level steps.

  Thank you.

  First question. How has the rounded Rectangle created? Using the Rectangle tool you rounding? If you have used this method, and then by the Opt (Alt) - clicking, you will get a dialog box allowing to set the RADIUS. (This also has shows where the measuring tool is hidden under the pipette)

  

  If you have already completed the rectangle or imported and apply effect > convert to shape > rounded Rectangle, the you'll another dialogue box in which you can define the RADIUS.

  

  You can continue to modify this option by double-clicking the line of effect of Rectangle rounded in the appearance Panel to retrieve the dialog box. If any rectangle to another program or a file that you have been given then probably the best way is to drag guides of leaders for the anchor points that define the curve and use the measure tool to measure the distance between the intersection of anchor points and path.

  

• bug of the pipette

  Hello world

  It seems Photoshop eyedropper or CMS has a problem. I've attached an example of .psd file so that anyone can reproduce the error.

  
  

  Simply open and switch layer1 to the linear density screen blending mode. You will notice that therefore gray pixels will get visually a bit brighter, but the pipette will show RGB = (38,38,38) in both cases! (you can measure anywhere in the center of the image, for example the pixel (X = 51, Y = 35), which is the point where I measured for the screenshots below).

  The point is: any pixel identified by Photoshop RGB = (38,38,38) should look the same, not sometimes brilliant and sometimes darker.

  
  

  If you don't trust your eyes (which can fall pray to an optical illusion), just open my screenshots in any application with a pipette (even Windows Paint will do I guess) and compare the values of the gray area (make sure that the eyedropper sample size is 1 x 1 (sample point)). The values will differ.
  

  Or if you want to not count on my screenshots, just make your own.

  
  

  To ensure that additional measures, I also used a pipette utility screen named "ColorCop" which displays the actual values of RGB pixel of the screen at the current position of the cursor in real-time. The recorded values are obviously the same as can be recovered in the screenshots below, either = (42,42,42) for the screenshot 1 RGB and RGB = (43,43,43) for the screenshot 2.

  NOTE 1: The question is unrelated to any resulting possible rounding of blend modes errors and multiple layers. To prove this, you can flatten the image (menu: layer > > flatten image). Still the same problem.

  
  

  NOTE 2: For those of you familiar with color management, the actual values comes from your screenshots depending on the color profile associated with your monitor. This explains the differences between the RGB = (38,38,38) and the values in the screenshots (in my case 42,42,42 and 43,43,43). Your values will be obviously different. I also noticed that if you choose sRGB as your monitor profile, the error can be reproduced.

  Parameters:

  the color picker sample size: 1 x 1
  

  document measured pixel: X = 51, Y = 35

  measure screen pixel: X = 602, Y = 510
  

  Adobe Photoshop: CS3

  the document color space: (irrelevant, sRGB)

  document .psd in question: Home

  screenshot 1 (RGB = 38, 38, 38 shown in dark gray):

  (click to enlarge!) :
  

  

  screenshot 2 (RGB = 38, 38, 38 shown in lighter gray):

  

  ¶

  always looks like a simple rounding error for me, when you look at to CMYK you get 71/65/64/70 for screen and 71/65/64/69 for linear density

• iPhone glitch screen after updating to iOS 10 and 6

  Since I upgraded my iPhone 6 with iOS 10.0.2 my screen made my fuzzy words and if I have my phone unlocked for more than 5 minutes it glitches upwards and should reset every time. Almost like static on a TV, go right to digital lines and my screen will not work. I have already backed up my phone to iTunes and it said: I went on my ability to my phone, which is a 64 GB. I deleted more than 2,000 photos and most of my apps and now I have more space on my phone, but it is still some glitches. I don't know what else to do.

  Hey maddy116ul,

  To summarize the problems that you are experiencing, your iPhone screen is not clear and you have also problems with the storage space on your iPhone. Let's go over some troubleshooting to get smooth it.

  From the screen on your iPhone, take a look at the information below. Go you through a few steps that you have already done, but is part of standard troubleshooting for problems with your screen? It will also restore your device as well as to make a backup first. Given that you have a problem with the storage space and fear that the backup does not fit on your iPhone, it recommends to contact Apple more support to help with these two questions.
  
  

  If you see lines, missing sections, discoloration or poor image quality

  1. Try to reboot your device. If you cannot restart, forced to reboot your device.
  2. If this does not work, restore your device.
  3. If you still see the question after the restoration, contact Apple technical support.

  Get help with the screen on your iPhone, iPad or iPod touch
  https://support.Apple.com/en-us/HT203039

  Take care.

• my iPhone has a lot of glitches, my iPhone has a lot of glitches

  Since I updated to iOS 10, my iPhone 6 more has been glitching much and my apps won't update either, and when I'm trying to see if theres a new update for iOS 10 it never loads and he says: "unable to verify the update, that an error occurred when checking for a software update.

  What troubleshooting steps have been taken so far?

• Work with Sierra but with timer Glitch

  Yes, I can confirm that Final Cut Pro seems to work correctly with Sierra except for the graphical Glitch in the Panel of timecode as others have focused on the FCP.co. I have reset FCP preferences by pressing Command + Option when you start the PCF 10.2.3. I've not yet installed, but third party extensions I heard some or many of those that are problematic, so we'll just wait for updates more I guess.

  

  Yes, it is well publicized.

  http://www.FCP.co/Forum/4-Final-Cut-Pro-x-FCPX/25962-MacOS-Sierra-what-works-and - this only-n-t

  http://finalcutprox.guru/blogs-main/products-blog/files/MacOS-Sierra-update.html

  It is never wise to update an operating system (of any type) until all your applications and plugins have been updated, too.  Apple usually has their own developed applications to update for a few weeks, or an OX update.  It can come in the form of a simple update of the video Pro Support package.  Or we can see updates for pro applications individually.  Nobody knows.  But I don't know that it will correct this.

• Apple Watch series 2 measure gain altitude or altitude?

  Hello

  I'm confused, the 2 series watch is not supposed to have a barometer, but today after I watched a training session (open air cycle) in the activity of application on my iPhone I saw 'elevation' win (622 m) and it was there (compared to a parallel measure with a Garmin 920XT). I registered the workout on the watch, but had my iPhone (6s) in my pocket. So the series 2 Watch measures altitude/elevation or he draws the data from my iPhone... I'll experiment more, without taking my iPhone along next time.

  During this time, is that what someone did similar comments?

  And of course, I would be grateful for any help on how to export training sessions (write to GPX etc.).

  Thanks and best wishes

  Yes, the watch/app will draw altimetry from your phone when it is within range.