PIX 501 does support proxy ARP?

Hello

I would like to know if it is possible to publish a proxy arp some public address on the external interface of a PIX 501.

What is the command I should use?

Thank you

Hello

proxy ARP is performed automatically when you use the 'static' command to bind the IPaddress private an internal server to a public IP address.

Kind regards

Tom

Tags: Cisco Security

Similar Questions

  • QoS is supported on the Cisco PIX 501 or 506th?

    Hello

    There is no mention of QoS in technical for the PIX 501 and 506 records but nothing for the 515. PIX OS 7.x configuration guides do not mention specific material support.

    Does anyone know if QoS is taken care of in the 501 or 506th - I need support lines expectations for VoIP over IPSec.

    Thank you

    Chris

    QoS is supported in 7.x code, you would have to level 501/506 to 7.x code, but this is not supported on these two models, the next logical solution would be to upgrade your PIX 501/506 to asa5505s.

    Rgds

    Jorge

  • Fixed DNS does not not on PIX 501 6.3

    Hi all

    I'm running a PIX 501 FW and all is well except for one thing. We have a DNS on the inside and the docs setting of dns correction should automatically translate a records so that they have IP addresses 'outside' from the outside, even if they are actually configured on the DNS server with 'inside' IP.

    However, it does not work. If I for example. query the DNS server for ns.my.com it returns 10.195.0.1 and x.x.x.x not as I expected.

    Is my wrong setting or not working at all?

    Excerpt from config:

    fixup protocol dns-maximum length 2048

    public static x.x.x.x (indoor, outdoor) 10.195.0.1 netmask 255.255.255.255 0 0

    Hello

    I don't think that is what dns fixup is for.

    Try this

    public static dns netmask 255.255.255.255 x.x.x.x (indoor, outdoor) 10.195.0.1

  • B2B Oracle does support the use of proxy?

    Hello

    I just want to know that Oracle B2B does support the use of the proxy to send messages to the trading partner? If so, then can you please provide pointers from where I can get the relevant information?

    Thank you and best regards,
    Anuj Dwivedi

    The approach described above is used for all the reverse proxy configuration of B2B. You may be interested

    Re: configuration of the proxy for 10.1.2 b2b with 10.1.3 OSH

  • How to configure the PPPoE on PIX 501?

    Mailto: [email protected] / * /

    MSN: [email protected] / * /

    According to the below URL Cisco TAC:

    http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00801055dd.shtml

    but I always failed. And my PIX 501 Configuration noted below:

    pixfirewall # write terminal

    Building configuration...

    : Saved

    :

    6.3 (1) version PIX

    interface ethernet0 10baset

    interface ethernet1 100full

    ethernet0 nameif outside security0

    nameif ethernet1 inside the security100

    enable password xxxx

    passwd xxxx

    pixfirewall hostname

    fixup protocol ftp 21

    fixup protocol h323 h225 1720

    fixup protocol h323 ras 1718-1719

    fixup protocol http 80

    fixup protocol they 389

    fixup protocol rsh 514

    fixup protocol rtsp 554

    fixup protocol sip 5060

    fixup protocol sip udp 5060

    fixup protocol 2000 skinny

    fixup protocol smtp 25

    fixup protocol sqlnet 1521

    names of

    pager lines 24

    Outside 1500 MTU

    Within 1500 MTU

    IP address outside pppoe setroute

    IP address inside 192.168.1.254 255.255.255.0

    alarm action IP verification of information

    alarm action attack IP audit

    history of PDM activate

    ARP timeout 14400

    Global 1 interface (outside)

    NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

    Route inside 10.0.0.0 255.0.0.0 192.168.1.1 1

    Route inside 20.0.0.0 255.0.0.0 192.168.1.1 1

    Timeout xlate 03:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

    H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

    Timeout, uauth 0:05:00 absolute

    GANYMEDE + Protocol Ganymede + AAA-server

    RADIUS Protocol RADIUS AAA server

    AAA-server local LOCAL Protocol

    No snmp server location

    No snmp Server contact

    SNMP-Server Community public

    No trap to activate snmp Server

    enable floodguard

    Telnet timeout 5

    SSH timeout 5

    Console timeout 0

    VPDN group pppoex request dialout pppoe

    Cisco localname VPDN group pppoex

    VPDN group ppp authentication pap pppoex

    VPDN username xxxx password *.

    Terminal width 80

    Cryptochecksum:xxxx

    : end

    [OK]

    See the pixfirewall version #.

    Cisco PIX Firewall Version 6.3 (1)

    Cisco PIX Device Manager Version 1.1 (2)

    Updated Thursday 19 March 03 11:49 by Manu

    pixfirewall until 58 mins 6 dry

    Material: PIX - 501, 16 MB RAM, 133 MHz Am5x86 CPU

    Flash E28F640J3 @ 0 x 3000000, 8 MB

    BIOS Flash E28F640J3 @ 0xfffd8000, 128KB

    0: ethernet0: the address is 000b.fd58.886b, irq 9

    1: ethernet1: the address is 000b.fd58.886c, irq 10

    Features licensed:

    Failover: disabled

    VPN - A: enabled

    VPN-3DES-AES: enabled

    Maximum Interfaces: 2

    Cut - through Proxy: enabled

    Guardians: enabled

    URL filtering: enabled

    Internal hosts: 50

    Throughput: unlimited

    you have all the debugging logs?

  • PIX-to-PIX VPN does not

    Here is my configuration:

    local-pix 501 connected to the DSL line.

    506th pix remote control connected to the dsl line

    unique IP address routable on each PIX (so using PAT, no NAT).

    try to create a site to site vpn. Tried of PDM, CLI via documentation cisco CLI via the book of Richard Deal. I can apparently make the connections, but no traffic flows. I have no idea what I'm doing wrong. Here are the relevant configs:

    PIX of premises:

    6.3 (3) version PIX

    interface ethernet0 car

    interface ethernet1 100full

    ethernet0 nameif outside security0

    nameif ethernet1 inside the security100

    activate the password

    passwd

    hostname encima

    domain name gold - eagle.org

    fixup protocol dns-length maximum 512

    fixup protocol ftp 21

    fixup protocol h323 h225 1720

    fixup protocol h323 ras 1718-1719

    fixup protocol http 80

    fixup protocol they 389

    fixup protocol pptp 1723

    fixup protocol rsh 514

    fixup protocol rtsp 554

    fixup protocol sip 5060

    fixup protocol sip udp 5060

    fixup protocol 2000 skinny

    fixup protocol smtp 25

    fixup protocol sqlnet 1521

    fixup protocol tftp 69

    names of

    access-list outside_access_in allow accord 64.144.92.0 255.255.255.128 no matter what newspaper

    outside_access_in list of access permitted tcp 64.144.92.0 255.255.255.128 eq pptp pptp log any eq

    outside_access_in list access permit icmp any any echo response

    access-list outside_access_in allow icmp all once exceed

    outside_access_in list access permit icmp any any source-quench

    outside_access_in list all permitted access all unreachable icmp

    outside_access_in list of permitted access esp 66.159.222.109 host 67.100.95.114

    outside_access_in list of permitted access esp 67.100.95.114 host 66.159.222.109

    access-list 90 allow ip 172.17.0.0 255.255.255.0 172.24.1.0 255.255.255.0

    pager lines 24

    opening of session

    registration of information monitor

    logging buffered information

    ICMP permitted host 67.100.95.114 outside

    ICMP allow any inside

    Outside 1500 MTU

    Within 1500 MTU

    IP address outside x.x.x.109 255.255.255.0

    IP address inside 172.17.0.1 255.255.255.0

    alarm action IP verification of information

    alarm action attack IP audit

    location of PDM 172.24.1.0 255.255.255.0 outside

    location of PDM 172.17.0.0 255.255.255.0 outside

    location of PDM 64.144.92.0 255.255.255.128 outside

    location of PDM 172.17.0.0 255.255.0.0 inside

    PDM logging 100 information

    history of PDM activate

    ARP timeout 14400

    Global 1 interface (outside)

    NAT (inside) - 0-90 access list

    NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

    Access-group outside_access_in in interface outside

    Route outside 0.0.0.0 0.0.0.0 66.159.222.1 1

    Timeout xlate 0:05:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

    H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

    Timeout, uauth 0:05:00 absolute

    GANYMEDE + Protocol Ganymede + AAA-server

    RADIUS Protocol RADIUS AAA server

    AAA-server local LOCAL Protocol

    the ssh LOCAL console AAA authentication

    LOCAL AAA authorization command

    Enable http server

    x.x.x.x 255.255.255.255 out http

    x.x.x.x 255.255.255.128 out http

    http 172.17.0.0 255.255.255.0 inside

    No snmp server location

    No snmp Server contact

    SNMP-Server Community public

    No trap to activate snmp Server

    enable floodguard

    Permitted connection ipsec sysopt

    Crypto ipsec transform-set strong esp-3des esp-sha-hmac

    toEssex 20 ipsec-isakmp crypto map

    correspondence address card crypto 20 90 toEssex

    peer set card crypto toEssex 20 67.100.95.114

    toEssex 20 set transformation-strong crypto card

    toEssex interface card crypto outside

    ISAKMP allows outside

    ISAKMP key * address 67.100.95.114 netmask 255.255.255.255

    part of pre authentication ISAKMP policy 9

    ISAKMP policy 9 3des encryption

    ISAKMP policy 9 sha hash

    9 1 ISAKMP policy group

    ISAKMP policy 9 life 86400

    Telnet 172.17.0.0 255.255.255.0 inside

    Telnet timeout 60

    SSH x.x.x.x 255.255.255.128 outside

    SSH timeout 60

    Console timeout 0

    dhcpd address 172.17.0.2 - 172.17.0.32 inside

    dhcpd dns x.x.x.100 66.218.44.5

    dhcpd lease 3600

    dhcpd ping_timeout 750

    dhcpd outside auto_config

    dhcpd allow inside

    username ckaiser password * encrypted privilege 15

    Terminal width 80

    Cryptochecksum:xxxxxx

    : end

    PIX remotely:

    6.3 (1) version PIX

    interface ethernet0 car

    Auto interface ethernet1

    ethernet0 nameif outside security0

    nameif ethernet1 inside the security100

    activate the password

    passwd

    EVL-PIX-DSL host name

    domain essexcredit.com

    fixup protocol ftp 21

    fixup protocol h323 h225 1720

    fixup protocol h323 ras 1718-1719

    fixup protocol http 80

    fixup protocol they 389

    fixup protocol pptp 1723

    fixup protocol rsh 514

    fixup protocol rtsp 554

    fixup protocol sip 5060

    fixup protocol sip udp 5060

    fixup protocol 2000 skinny

    fixup protocol smtp 25

    fixup protocol sqlnet 1521

    names of

    access-list outside_access_in allow accord any any newspaper

    outside_access_in list access permit tcp any any eq pptp newspaper

    outside_access_in list access permit icmp any any echo response

    access-list outside_access_in allow icmp all once exceed

    outside_access_in list access permit icmp any any source-quench

    outside_access_in list all permitted access all unreachable icmp

    outside_access_in esp x.x.x.114 host 66.159.222.109 host allowed access list

    outside_access_in list of permitted access esp 66.159.222.109 host 67.100.95.114

    access-list 80 allow ip 172.24.1.0 255.255.255.0 172.17.0.0 255.255.255.0

    pager lines 24

    opening of session

    timestamp of the record

    monitor debug logging

    logging buffered information

    recording of debug trap

    history of logging warnings

    logging feature 22

    ICMP permitted host x.x.222.109 outdoor

    ICMP allow any inside

    Outside 1500 MTU

    Within 1500 MTU

    IP address outside x.x.x.114 255.255.255.248

    IP address inside 172.24.1.240 255.255.255.0

    alarm action IP verification of information

    alarm action attack IP audit

    PDM location x.x.x.x 255.255.255.255 outside

    location of PDM 172.24.1.0 255.255.255.0 inside

    PDM logging 100 information

    history of PDM activate

    ARP timeout 14400

    Global 1 interface (outside)

    NAT (inside) - 0 80 access list

    NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

    Access-group outside_access_in in interface outside

    Route outside 0.0.0.0 0.0.0.0 67.100.95.113 1

    Route outside x.x.x.0 255.255.0.0 66.159.222.109 1

    Timeout xlate 0:05:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

    H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

    Timeout, uauth 0:05:00 absolute

    GANYMEDE + Protocol Ganymede + AAA-server

    RADIUS Protocol RADIUS AAA server

    AAA-server local LOCAL Protocol

    the ssh LOCAL console AAA authentication

    LOCAL AAA authorization command

    Enable http server

    x.x.x.x 255.255.255.255 out http

    http 172.24.1.0 255.255.255.0 inside

    SNMP-server host within the 172.24.1.11

    Server SNMP Emeryville, CA location

    Server SNMP contact Charlie Kaiser

    snmp4esx SNMP-Server community!

    SNMP-Server enable traps

    enable floodguard

    Permitted connection ipsec sysopt

    Crypto ipsec transform-set strong esp-3des esp-sha-hmac

    toEncima 10 ipsec-isakmp crypto map

    correspondence address card crypto 10 80 toEncima

    peer set card crypto toEncima 10 66.159.222.109

    toEncima card 10 game of transformation-strong crypto

    toEncima interface card crypto outside

    ISAKMP allows outside

    ISAKMP key * address 66.159.222.109 netmask 255.255.255.255

    part of pre authentication ISAKMP policy 8

    ISAKMP strategy 8 3des encryption

    ISAKMP strategy 8 sha hash

    8 1 ISAKMP policy group

    ISAKMP life duration strategy 8 the 86400

    Telnet 172.24.1.0 255.255.255.0 inside

    Telnet timeout 60

    SSH x.x.x.x 255.255.255.255 outside

    SSH timeout 60

    Console timeout 0

    username ckaiser password * encrypted privilege 15

    Terminal width 80

    Cryptochecksumxxxxxx

    : end

    When I try to ping an address on the net since the first pix of 172.24, I get no response. When I try to ping an address on the net since the second pix 172,17, I get no response. Connectivity Internet is fine. I can ping the addresses outside each pix OK.

    My debug output for isakmp shows the State of return is IKMP_NO_ERROR and the SAs look OK; everything matches. Several configs / debugs available upon request.

    No idea why I can't get from one network to the other?

    Thank you!

    Charlie Kaiser

    "When I try to ping an address on the net since the first pix of 172.24, I get no response. When I try to ping an address on the net since the second pix 172,17, I get no response. »

    It could be as simple as because you try to ping from the PIX (because you can't) and your tunnel could in fact be working properly

    Try to ping from a device on 172,17 to one in 172.24.

    (Make sure that your access point to the opposing LAN for these host devices are set to be the PIX)

    HTH

  • PIX 501 10 User License

    Does anyone know if the PIX 501 10 user license will limit the number of users can cross a site to site VPN that ends at the PIX?

    Yes, it does, I encountered a problem with it myself in the past. The page at http://www.cisco.com/en/US/customer/products/hw/vpndevc/ps2030/products_data_sheet09186a0080091b18.html

    It is said "the Cisco PIX 501 license 10 users supports up to 10 simultaneous source IP addresses for your internal network to browse the Cisco PIX 501.»

    In my case what happened is that we had a VPN site-to-site created with a small office that adds a little more employees, everything was going well until the 11 IP address attempted to connect to a resource across the IPSec tunnel. We solved the problem by opting for a 50 user license.

  • PIX 501 for Cisco 3640 VPN router

    -Start ciscomoderator note - the following message has been changed to remove potentially sensitive information. Please refrain from publishing confidential information about the site to reduce the risk to the security of your network. -end of the note ciscomoderator-

    Have a 501 PIX and Cisco 3640 router. The 3640 is configured for dynamic map for VPN. The PIX 501 is set to pointing to the 3640 router static map. I can establish a tunnel linking the PIX to the router and telnet to a machine AIX on the inside network to the router. When I try to print on the network of the PIX 501 inside it fails.

    What Miss me? I added the configuration for the PIX and the router.

    Here are the PIX config:

    PIX Version 6.1 (1)

    ethernet0 nameif outside security0

    nameif ethernet1 inside the security100

    enable encrypted password xxxxxxxxxxxxxxxx

    xxxxxxxxxxxxx encrypted passwd

    pixfirewall hostname

    fixup protocol ftp 21

    fixup protocol http 80

    fixup protocol h323 1720

    fixup protocol rsh 514

    fixup protocol rtsp 554

    fixup protocol smtp 25

    fixup protocol sqlnet 1521

    fixup protocol sip 5060

    fixup protocol 2000 skinny

    names of

    pager lines 24

    interface ethernet0 10baset

    interface ethernet1 10full

    Outside 1500 MTU

    Within 1500 MTU

    IP address outside dhcp setroute

    IP address inside 192.168.1.1 255.255.255.0

    alarm action IP verification of information

    alarm action attack IP audit

    PDM logging 100 information

    history of PDM activate

    ARP timeout 14400

    Global 1 interface (outside)

    NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

    Timeout xlate 0:05:00

    Timeout conn 01:00 half-closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 sip 0:30:00 sip_media 0:02:00

    Timeout, uauth 0:05:00 absolute

    GANYMEDE + Protocol Ganymede + AAA-server

    RADIUS Protocol RADIUS AAA server

    Enable http server

    http 192.168.1.0 255.255.255.0 inside

    No snmp server location

    No snmp Server contact

    SNMP-Server Community public

    No trap to activate snmp Server

    enable floodguard

    No sysopt route dnat

    Telnet timeout 5

    SSH timeout 5

    dhcpd address 192.168.1.2 - 192.168.1.33 inside

    dhcpd lease 3600

    dhcpd ping_timeout 750

    dhcpd outside auto_config

    dhcpd allow inside

    Terminal width 80

    Cryptochecksum:XXXXXXXXXXXXXXXXXXX

    : end

    Here is the router config

    Router #sh runn

    Building configuration...

    Current configuration: 6500 bytes

    !

    version 12.2

    no service button

    tcp KeepAlive-component snap-in service

    a tcp-KeepAlive-quick service

    horodateurs service debug datetime localtime

    Log service timestamps datetime localtime

    no password encryption service

    !

    router host name

    !

    start the flash slot1:c3640 - ik9o3s - mz.122 - 16.bin system

    queue logging limit 100

    activate the password xxxxxxxxxxxxxxxxx

    !

    clock TimeZone Central - 6

    clock summer-time recurring CENTRAL

    IP subnet zero

    no ip source route

    !

    !

    no ip domain-lookup

    !

    no ip bootp Server

    inspect the name smtp Internet IP

    inspect the name Internet ftp IP

    inspect the name Internet tftp IP

    inspect the IP udp Internet name

    inspect the tcp IP Internet name

    inspect the name DMZ smtp IP

    inspect the name ftp DMZ IP

    inspect the name DMZ tftp IP

    inspect the name DMZ udp IP

    inspect the name DMZ tcp IP

    audit of IP notify Journal

    Max-events of po verification IP 100

    !

    crypto ISAKMP policy 1

    BA 3des

    preshared authentication

    Group 2

    !

    crypto ISAKMP policy 20

    BA 3des

    preshared authentication

    Group 2

    ISAKMP crypto key address x.x.180.133 xxxxxxxxxxx

    ISAKMP crypto keys xxxxxxxxxxx address 0.0.0.0 0.0.0.0

    !

    !

    Crypto ipsec transform-set esp-3des esp-sha-hmac vpn test

    Crypto ipsec transform-set esp-3des esp-sha-hmac PIXRMT

    !

    dynamic-map crypto dny - Sai 25

    game of transformation-PIXRMT

    match static address PIX1

    !

    !

    static-card 10 map ipsec-isakmp crypto

    the value of x.x.180.133 peer

    the transform-set vpn-test value

    match static address of Hunt

    !

    map ISCMAP 15-isakmp ipsec crypto dynamic dny - isc

    !

    call the rsvp-sync

    !

    !

    !

    controller T1 0/0

    framing ESF

    linecode b8zs

    Slots 1-12 channels-group 0 64 speed

    Description controller to the remote frame relay

    !

    controller T1 0/1

    framing ESF

    linecode b8zs

    Timeslots 1-24 of channel-group 0 64 speed

    Description controller for internet link SBIS

    !

    interface Serial0/0:0

    Description CKT ID 14.HXGK.785129 Frame Relay to Remote Sites

    bandwidth 768

    no ip address

    no ip redirection

    no ip unreachable

    no ip proxy-arp

    encapsulation frame-relay

    frame-relay lmi-type ansi

    !

    interface Serial0 / point to point 0:0.17

    Description Frame Relay to xxxxxxxxxxx location

    IP unnumbered Ethernet1/0

    no ip redirection

    no ip unreachable

    no ip proxy-arp

    IP nat inside

    No arp frame relay

    dlci 17 frame relay interface

    !

    interface Serial0 / point to point 0:0.18

    Description Frame Relay to xxxxxxxxxxx location

    IP unnumbered Ethernet1/0

    no ip redirection

    no ip unreachable

    no ip proxy-arp

    IP nat inside

    No arp frame relay

    dlci 18 frame relay interface

    !

    interface Serial0 / point to point 0:0.19

    Description Frame Relay to xxxxxxxxxxx location

    IP unnumbered Ethernet1/0

    no ip redirection

    no ip unreachable

    no ip proxy-arp

    IP nat inside

    No arp frame relay

    dlci 19 frame relay interface

    !

    interface Serial0 / point to point 0:0.20

    Description Frame Relay to xxxxxxxxxxxxx location

    IP unnumbered Ethernet1/0

    no ip redirection

    no ip unreachable

    no ip proxy-arp

    IP nat inside

    No arp frame relay

    dlci 20 frame relay interface

    !

    interface Serial0 / point to point 0:0.21

    Description Frame Relay to xxxxxxxxxxxx

    IP unnumbered Ethernet1/0

    no ip redirection

    no ip unreachable

    no ip proxy-arp

    IP nat inside

    No arp frame relay

    dlci 21 frame relay interface

    !

    interface Serial0 / point to point 0:0.101

    Description Frame Relay to xxxxxxxxxxx

    IP unnumbered Ethernet1/0

    no ip redirection

    no ip unreachable

    no ip proxy-arp

    IP nat inside

    No arp frame relay

    dlci 101 frame relay interface

    !

    interface Serial0/1:0

    CKT ID 14.HCGS.785383 T1 to ITT description

    bandwidth 1536

    IP address x.x.76.14 255.255.255.252

    no ip redirection

    no ip unreachable

    no ip proxy-arp

    NAT outside IP

    inspect the Internet IP on

    no ip route cache

    card crypto ISCMAP

    !

    interface Ethernet1/0

    IP 10.1.1.1 255.255.0.0

    no ip redirection

    no ip unreachable

    no ip proxy-arp

    IP nat inside

    no ip route cache

    no ip mroute-cache

    Half duplex

    !

    interface Ethernet2/0

    IP 10.100.1.1 255.255.0.0

    no ip redirection

    no ip unreachable

    no ip proxy-arp

    IP nat inside

    no ip route cache

    no ip mroute-cache

    Half duplex

    !

    router RIP

    10.0.0.0 network

    network 192.168.1.0

    !

    IP nat inside source list 112 interface Serial0/1: 0 overload

    IP nat inside source static tcp 10.1.3.4 443 209.184.71.138 443 extensible

    IP nat inside source static tcp 10.1.3.4 9869 209.184.71.138 9869 extensible

    IP nat inside source 10.1.3.2 static 209.184.71.140

    IP nat inside source static 10.1.3.6 209.184.71.139

    IP nat inside source static 10.1.3.8 209.184.71.136

    IP nat inside source static tcp 10.1.3.10 80 209.184.71.137 80 extensible

    IP classless

    IP route 0.0.0.0 0.0.0.0 x.x.76.13

    IP route 10.2.0.0 255.255.0.0 Serial0 / 0:0.19

    IP route 10.3.0.0 255.255.0.0 Serial0 / 0:0.18

    IP route 10.4.0.0 255.255.0.0 Serial0 / 0:0.17

    IP route 10.5.0.0 255.255.0.0 Serial0 / 0:0.20

    IP route 10.6.0.0 255.255.0.0 Serial0 / 0:0.21

    IP route 10.7.0.0 255.255.0.0 Serial0 / 0:0.101

    no ip address of the http server

    !

    !

    PIX1 static extended IP access list

    IP 10.1.0.0 allow 0.0.255.255 192.168.1.0 0.0.0.255

    IP access-list extended hunting-static

    IP 10.1.0.0 allow 0.0.255.255 192.168.1.0 0.0.0.255

    extended IP access vpn-static list

    ip permit 192.168.1.0 0.0.0.255 10.1.0.0 0.0.255.255

    IP 192.0.0.0 allow 0.255.255.255 10.1.0.0 0.0.255.255

    access-list 1 refuse 10.0.0.0 0.255.255.255

    access-list 1 permit one

    access-list 12 refuse 10.1.3.2

    access-list 12 allow 10.1.0.0 0.0.255.255

    access-list 12 allow 10.2.0.0 0.0.255.255

    access-list 12 allow 10.3.0.0 0.0.255.255

    access-list 12 allow 10.4.0.0 0.0.255.255

    access-list 12 allow 10.5.0.0 0.0.255.255

    access-list 12 allow 10.6.0.0 0.0.255.255

    access-list 12 allow 10.7.0.0 0.0.255.255

    access-list 112 deny ip host 10.1.3.2 everything

    access-list 112 refuse ip 10.1.0.0 0.0.255.255 192.168.1.0 0.0.0.255

    access-list 112 allow ip 10.1.0.0 0.0.255.255 everything

    access-list 112 allow ip 10.2.0.0 0.0.255.255 everything

    access-list 112 allow ip 10.3.0.0 0.0.255.255 everything

    access-list 112 allow ip 10.4.0.0 0.0.255.255 everything

    access-list 112 allow ip 10.5.0.0 0.0.255.255 everything

    access-list 112 allow ip 10.6.0.0 0.0.255.255 everything

    access-list 112 allow ip 10.7.0.0 0.0.255.255 everything

    access-list 120 allow ip host 10.100.1.10 10.1.3.7

    not run cdp

    !

    Dial-peer cor custom

    !

    !

    !

    !

    connection of the banner ^ CCC

    ******************************************************************

    WARNING - Unauthorized USE strictly PROHIBITED!

    ******************************************************************

    ^ C

    !

    Line con 0

    line to 0

    password xxxxxxxxxxxx

    local connection

    Modem InOut

    StopBits 1

    FlowControl hardware

    line vty 0 4

    exec-timeout 15 0

    password xxxxxxxxxxxxxx

    opening of session

    !

    end

    Router #.

    Add the following to the PIX:

    > permitted connection ipsec sysopt

    This indicates the PIX around all ACLs for IPsec traffic. Now that your IPSec traffic is still subject to the standard rules of PIX, so launched inside the traffic is allowed to go in, but off-initiated traffic is not.

  • Can add more than 2 DNS setting DHCP PIX 501?

    I would ask that can add more than 2 DNS DHCP PIX 501 framework? If so, how? I need to add two external DNS and DNS internal to my DHCP clients.

    Thanks for help.

    PIX only supports 2 DNS and WINS for dhcp clients

    I hope that helps... Rate if he does!

  • Help with vpn pix 501

    I'm setting up a cisco pix 501 vpn tunnel but will have questions. The Firewall works although I am able to get out of the internet, but the VPN does not work. On the primary side, I see that the tunnel is up and the traffic is sent but not received.

    Currently I'm sitting at the secondary location but don't know what the problem maybe. Anyone know what I have wrong which could prevent the data to send from this device?

    Here is my config

    Here's my config if it would help

    See the race
    : Saved
    :
    6.3 (5) PIX version
    interface ethernet0 car
    interface ethernet1 100full
    ethernet0 nameif outside security0
    nameif ethernet1 inside the security100
    activate 2KFQnbNIdI.2KYOU encrypted password
    2KFQnbNIdI.2KYOU encrypted passwd
    hostname ciscofirewall
    domain hillsanddales.com
    fixup protocol dns-length maximum 512
    fixup protocol ftp 21
    fixup protocol h323 h225 1720
    fixup protocol h323 ras 1718-1719
    fixup protocol http 80
    fixup protocol rsh 514
    fixup protocol rtsp 5
    fixup protocol rtsp 55
    fixup protocol rtsp 554
    fixup protocol sip 5060
    fixup protocol sip udp 5060
    fixup protocol 2000 skinny
    fixup protocol smtp 25

    fixup protocol sqlnet 1521
    fixup protocol tftp 69
    names of
    access-list 101 permit ip 192.168.80.0 255.255.255.0 192.168.50.0 255.255.255.0
    192.168.80.0 IP Access-list sheep 255.255.255.0 allow 192.168.50.0 255.255.255.0
    in_outside list access permit tcp any host 192.168.50.240
    in_outside list access permit tcp any host 64.90.xxx.xx
    pager lines 24
    Outside 1500 MTU
    Within 1500 MTU
    IP address outside 66.84.xxx.xx 255.255.255.252
    IP address inside 192.168.80.1 255.255.255.0
    alarm action IP verification of information
    alarm action attack IP audit
    location of PDM 192.168.50.0 255.255.255.0 outside
    location of PDM 192.168.80.2 255.255.255.255 inside
    location of PDM 192.168.50.0 255.255.255.0 inside
    location of PDM 182.168.80.0 255.255.255.255 inside
    location of PDM 0.0.0.0 255.255.255.0 inside
    location of PDM 0.0.0.0 255.255.255.255 inside
    location of PDM 192.168.80.5 255.255.255.255 inside
    location of PDM 192.168.80.7 255.255.255.255 inside
    PDM logging 100 information
    history of PDM activate

    ARP timeout 14400
    Global 1 interface (outside)
    NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
    Route outside 0.0.0.0 0.0.0.0 66.84.xxx.x
    Route inside 192.168.50.0 255.255.255.0 192.168.50.240 1
    Timeout xlate 0:05:00
    Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
    H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
    Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
    Timeout, uauth 0:05:00 absolute
    GANYMEDE + Protocol Ganymede + AAA-server
    AAA-server GANYMEDE + 3 max-failed-attempts
    AAA-server GANYMEDE + deadtime 10
    RADIUS Protocol RADIUS AAA server
    AAA-server RADIUS 3 max-failed-attempts
    AAA-RADIUS deadtime 10 Server
    AAA-server local LOCAL Protocol
    Enable http server
    http 192.168.80.0 255.255.255.0 inside
    No snmp server location
    No snmp Server contact
    SNMP-Server Community public
    No trap to activate snmp Server
    enable floodguard
    <--- more="" ---="">

    Permitted connection ipsec sysopt
    Crypto ipsec transform-set esp-3des esp-md5-hmac aptset
    aptmap 10 ipsec-isakmp crypto map
    correspondence address card crypto aptmap 10 101
    card crypto aptmap 10 peers set 64.90.xxx.xx
    card crypto aptmap 10 transform-set aptset
    aptmap interface card crypto outside
    ISAKMP allows outside
    ISAKMP key * address 64.90.xxx.xx netmask 255.255.255.255
    ISAKMP identity address
    ISAKMP nat-traversal 20
    part of pre authentication ISAKMP policy 10
    ISAKMP policy 10 3des encryption
    ISAKMP policy 10 md5 hash
    10 2 ISAKMP policy group
    ISAKMP life duration strategy 10 86400
    Telnet 192.168.80.2 255.255.255.255 inside
    Telnet 182.168.80.0 255.255.255.255 inside
    Telnet 192.168.80.5 255.255.255.255 inside
    Telnet 192.168.80.0 255.255.255.0 inside
    Telnet 192.168.80.7 255.255.255.255 inside
    Telnet timeout 5
    SSH timeout 5
    management-access inside

    Console timeout 0
    dhcpd address 192.168.80.2 - 192.168.80.33 inside
    dhcpd dns 64.90.xxx.xx 64.90.xxx.xx
    dhcpd lease 3600
    dhcpd ping_timeout 750
    dhcpd outside auto_config
    dhcpd allow inside
    Terminal width 80
    Cryptochecksum:01532689fac9491fae8f86e91e2bd4c0
    : end

    Hello

    At least the NAT0 ACL is not in use

    You should have this added to the configuration

    NAT (inside) 0 access-list sheep

    -Jouni

  • PIX 501 and THE, 3DES, AES

    For a version newly produced PIX 501,

    (1) are DES, 3DES and AES activation keys all pre-installed?

    (2) how I can find on which of them is pre-installed on my PIX 501?

    (3) when I create a server VPN (on the PIX 501), I see that all three OF THEM, 3DES and AES are available in the drop-down list of the PDM configuration screen. Does that mean my PIX 501 have all three of them (FROM THE, 3DES and AES)? -If the answer is no, assume that only is preinstalled on PIX 501, then why/how can appear in the drop-down list the 3DES and AES?

    Thank you for helping.

    Scott

    Should be integrated already. depends on the way the news is your PIX 501.

    To be sure to log in to the console and type:

    See the version

    See the example output version:

    See the pixfirewall version (config) #.

    Cisco PIX Firewall Version 6.2 (3)

    Cisco PIX Device Manager Version 2.0 (1)

    Updated Thursday April 17 02 21:18 by Manu

    pixdoc515 up to 9 days 3 hours

    Material: PIX - 515, 64 MB RAM, Pentium 200 MHz processor

    I28F640J5 @ 0 x 300 Flash, 16 MB

    BIOS Flash AT29C257 @ 0xfffd8000, 32 KB

    0: ethernet0: the address is 0050.54ff.3772, irq 10

    1: ethernet1: the address is 0050.54ff.3773, irq 7

    2: ethernet2: the address is 00d0.b792.409d, irq 11

    Features licensed:

    Failover: enabled

    VPN - A: enabled

    VPN-3DES: enabled

    Maximum Interfaces: 6

    Cut - through Proxy: enabled

    Guardians: enabled

    URL filtering: enabled

    Internal hosts: unlimited

    Throughput: unlimited

    Peer IKE: unlimited

    Serial number: 480221353 (0x1c9f98a9)

    Activation key running: 0x36df4255 0x246dc5fc 0x39d2ec4d 0x09f6288f

    Modified configuration of enable_15 to 12:15:28.311 UTC Wednesday, may 1, 2002

    pixfirewall (config) #.

    Here, you should see if THE or 3DES, AES encryption is active or not. If you have just SOME so you can use the following link and get for free a new activation key that allows 3DES and AES.

    https://Tools.Cisco.com/swift/licensing/JSP/formGenerator/Pix3DesMsgDisplay.jsp

    sincerely

    Patrick

  • Proxy-arp or local proxy arp? Reference Dell Powerconnect 6224

    We need allow some customers to resolve the mac address of a server that is located in a different range of addresses, VLAN and IP.

    I thought that the addition of the ip proxy-arp interface command vlan should do the job, but this command seems to be activated by default according to the reference guide, after that I tried to add the command he always show up on a running show. Which confirmed my thoughts. While I was looking for the solution that I saw another command that does not appear in the cli reference guide: local-proxy-arp ip. But since I'm not sure of what will make this command I am careful to hit just the command on the interface VLAN.

    How others send their arp on powerconnect 6224 requests?

    After reading my own source again, I realized that the thing that I want is not possible. It goes beyond the need to divide the network into segments. If all the query arp is transferred to other networks, there is a benefit less: you want to limit the broadcast domain.

    Static ARP is the thing I'm going to need to be implemented to solve this problem.

    Thanks for the clarification anyway.

  • Connectivity random Cisco Pix 501

    Hello. I'm having some trouble with my CISCO PIX 501 Setup.

    A few months I started having random disconnects on my network (from inside to outside). The machines can ping the DC or the Pix, but impossible to surf the internet. The only way to make them go outside is a reboot of Pix.

    My configuration is:

    -----------

    See the ACE - pix config (config) #.
    : Saved
    : Written by enable_15 at 09:23:07.033 UTC Tuesday, June 3, 2014
    6.3 (3) version PIX
    interface ethernet0 car
    interface ethernet1 100full
    ethernet0 nameif outside security0
    nameif ethernet1 inside the security100
    activate 8Ry34retyt7RR564 encrypted password
    2fvbbfgdI.2KUOU encrypted passwd
    hostname as pix
    domain as.local
    fixup protocol dns-length maximum 512
    fixup protocol esp-ike
    fixup protocol ftp 21
    fixup protocol h323 h225 1720
    fixup protocol h323 ras 1718-1719
    fixup protocol http 80
    fixup protocol pptp 1723
    fixup protocol rsh 514
    fixup protocol rtsp 554
    fixup protocol sip 5060
    fixup protocol sip udp 5060
    fixup protocol 2000 skinny
    fixup protocol smtp 25
    fixup protocol sqlnet 1521
    fixup protocol tftp 69
    names of
    access-list acl_out permit icmp any one
    ip access list acl_out permit a whole
    access-list acl_out permit tcp any one
    Allow Access-list outside_access_in esp a whole
    outside_access_in list access permit udp any eq isakmp everything
    outside_access_in list of access permit udp any eq 1701 all
    outside_access_in list of access permit udp any eq 4500 all
    outside_access_in ip access list allow a whole
    pager lines 24
    Outside 1500 MTU
    Within 1500 MTU
    outside 10.10.10.2 IP address 255.255.255.0
    IP address inside 192.168.100.1 255.255.255.0
    alarm action IP verification of information
    alarm action attack IP audit
    history of PDM activate
    ARP timeout 14400
    Global 1 10.10.10.8 - 10.10.10.254 (outside)
    NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
    Access-group outside_access_in in interface outside
    access to the interface inside group acl_out
    Route outside 0.0.0.0 0.0.0.0 10.10.10.1 0
    Timeout xlate 03:00
    Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
    H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
    Timeout, uauth 0:05:00 absolute
    GANYMEDE + Protocol Ganymede + AAA-server
    RADIUS Protocol RADIUS AAA server
    AAA-server local LOCAL Protocol
    Enable http server
    http 192.168.10.2 255.255.255.255 inside
    http 192.168.10.101 255.255.255.255 inside
    http 192.168.100.2 255.255.255.255 inside
    No snmp server location
    No snmp Server contact
    SNMP-Server Community public
    No trap to activate snmp Server
    enable floodguard
    Permitted connection ipsec sysopt
    ISAKMP nat-traversal 20
    Telnet timeout 5
    SSH 192.168.10.101 255.255.255.255 inside
    SSH timeout 60
    Console timeout 0
    dhcpd dns 8.8.8.8 8.8.4.4
    dhcpd lease 3600
    dhcpd ping_timeout 750
    dhcpd outside auto_config
    Terminal width 80
    Cryptochecksum:7f9bda5e534eaeb1328ab08a3c4d28a
    ------------

    Do you have any advice? I don't get what's wrong with my setup.

    My DC is 192.168.100.2 and the network mask is 255.255.255.0

    The network configuration is configured to set the IP of the gateway to 192.168.100.1 (i.e. the PIX 501).

    I have about 50 + peers on the internal network.

    Any help is apprecciate.

    Hello

    You have a license for 50 users +?

    After the release of - Show version

    RES

    Paul

  • Configure the PIX 501 for IDS

    I have a PIX 501 with wired high-speed LAN headquarters inside and outside. Which would be a solid policy IDS to enable and what interfaces it must be applied to? There will be other measures necessary to enable IDS?

    IDS on the PIX itself is very limited, it checks only 59 signatures listed here (http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/cmdref/gl.htm#xtocid9 under the section of signatures supported IDS). The signatures themselves are pretty basic.

    If you do not want to activate this, then for the signatures of attacks I would fix for drop/alarm/reset action, which is the default anyway.

    You will also need to set the logging to a syslog server and monitoring for any 4000nn messages in syslog, cause it event IDS.

  • PIX 501, 1 static IP, IP address dynamic 2. Mesh full possible?

    I have 3 sites. All sites have PIX 501. Central site has a static IP, 2 remote sites a dynamic IP.

    I have no problem with the connection to the central site by using their dynamic IP address in a remote star connection.

    Is it possible for 2 remote sites communicate? There is data that must be transferred between remote sites. I read somewhere in cisco site web which its possible via mesh on request.

    Does anyone have an example of configuration on a VPN Site to Site where the Central site has static IP and remote sites with a dynamic IP? Remote locations teaches a dynamic IP from remote sites to the central server.

    Thank you.

    With IOS as your hub and then the Yes rays, the rays can learn dynamically address other departments using the PNDH. This type of configuration is called Dynamic Multipoint VPN (DMVPN), you can read everything you need to know about this here:

    http://www.Cisco.com/warp/public/105/DMVPN.html

    Even with EzVPN (not DMVPN) the rays will not learn the address of other rays, all communication is always via the hub. Call another talks would work, but as I said, the packages will talk-star.

Maybe you are looking for

  • Re: Satellite A660-1EK - cooling system

    I bought a Satellite A660-1EK 1 month ago and I have a problem.When I use it with battary I get a message like "warning: a problem with the cooling system has been detected." Please, turn off computer immediately and return it for service. » I get it

  • Satellite P50-B-110 - overheating while playing or watching the video

    * Satellite P50-B-110 *. * Card: *.-8.1 Windows 64-bit.-SSD 256-16 GB OF RAM-Intel i7-4710HQ 2.5 GHz Overheating problems when I watch videos on youtube and in particular when playing GT Racing 2 - Gameloft.When I look at Youtube videos that he will

  • Clip not recognized on PC in MTP mode

    Hi all I have a Sansa 2.0 G clip. I almost never update the music on my clip but I went to do a few months ago and couldn't recognize my clip. So after some research, I made an update firmware to 01.01.32A. After that, I saw is no longer my music. I

  • Vista deletes my 1 TB Hitachi internal hard drive

    About 6 months ago, I installed a 1 TB hitachi internal harddrive and life was good, but three days ago my computer started to drop this player.  When I stop and restart it returns but only for awhile, and then drops of Vista drive again.  It falls j

  • Toshiba c660 statup problume windows7

    Hello Mr President How are you Sir Sir Iam not happy Sir delay of 10 minutes statup pc toshiba c660 windows7 How can solve this plese give me good response God pless you loviglySanka