PIX 515E hardware health monitoring (7.0.1)

Similar Questions

• PC Health Monitor - assessment of the State of the battery on the L50T Satellite-

  Last week, I bought a brand new L50t-A-145 8.1 Windows running. Beautiful machine and apparently everything works perfectly.

  However when activating the PC Health Monitor, he recorded the drums as being in a State of 'fair'... which means that there ' a loss of capacity, but it will meet the needs of most users. For a new machine, it is simply not good enough... I have a P845t that is over a year who never recorded the State of the battery as in anything other than "good" condition.

  I did a number of things (which, I hasten to add, I never had to worry about the P845t or also any other Toshiba laptop)... (1) I charged the battery completely and let run for sub 10% at least 6 or 7 times; (2) I uninstalled PC Health Monitor and downloaded the latest version on the Toshiba site and reinstalled (3) I completely reset the computer. All to... nothing is done, the battery status still shows as that 'fair '.

  The reason for which I got a number of options, is that it seems to me there is nothing wrong with the battery... it does not seem to take longer than usual to load and I appear to get the proper use of the machine as she throws... my little finger tells me that there is nothing wrong with the battery.

  However, in contrast to previous cell phones, this one comes with the sealed battery (one wonders who the nutter who thought about this or has it been done to overcome the concerns of airport security and other?). Therefore, if it turns out that something is wrong with the battery, it would mean the withdrawal of the front rear and associates of concerns. Or is it strange reading symptomatic of another potential problem with the computer?

  So I am sending you the machine backwards, but requested, before, if anyone out there can think of something else I can do to check the situation?

  Please keep in mind, I'm not particularly bright when it comes to computers, so any advice must be specified for a layman to understand!

  Thank you very much.

  Lindsay

  Thanks for the comments. I don't know what went wrong, but the essential is that everything is OK again.

  Discount to zero has been the good method to check the hardware and software features.

• Satellite L850 - 1 FG: PC Health Monitor shows the bad battery

  Greetings,

  Already after a little more than two months after the purchase of this laptop, the TOSHIBA PC Health Monitor indicates that the health of my battery is 'poor' (about 1/4 health left!) and I wonder what possibilities there are that this is a hardware fault, and if I can get a spare battery and where.

  Thank you in advance.

  Hello

  I m not sure if its really a battery problem or failure.
  Maybe the battery needs to be calibrated several times in the line

  If the battery charge level is low, turn off all first battery should be completely discharged the automatic stand-by and the focus mode into hibernation.
  The battery must be completely empty. Then plug the AC adapter and charge it until the battery indicator would turn blue (or green).
  Then, unplug the AC adapter and start the discharge process
  Repeat this 3, 4 times and then check the health of the battery again.

• PIX 515E, 7.2 (1), restarts randomly several times per day

  Hello

  We have a PIX 515E race 7.2 (1) that reboots randomly. It has happened 4 times this morning and has been for several days.

  There is no significant syslog messages prior to the restart of the box. Monitoring CPU and memory usage shows nothing ununusual.

  No failover and without VPN. Pretty basic config, a flow low traffic.

  I've attached the crashinfo file - I looked through and it is meaningless to me.

  Someone at - it an idea?

  see you soon

  Chris

  The inspect esmtp is causing your ASA crashing. See: CSCse41795

  HTH pls note

• Question of BandNew PIX 515E

  I got some new PIX 515E security infra-red and I had sex 2 questions about everything I tried. I installed a 5 port switch inside and cannot ping anything from the console. I have a computer on the switch, and he is able to ping other devices on the switch, but not the PIX.

  What I find strange is that when I try to ping from the inside interface on the PIX of one inside computers, PIX displays the MAC address of the computer inside in the arp table.

  My goal is to upgrade the PIX to ver7.0 but I can't do so until I can solve this problem.

  Here are some information among the PIX.

  #sh worm

  Cisco PIX Firewall Version 6.3 (4)

  Cisco PIX Device Manager Version 3.0 (2)

  Updated Saturday 2 July 04 00:07 by Manu

  pixfirewall up to 29 minutes 33 seconds

  Material: PIX-515E, 128 MB RAM, Pentium II 433 MHz processor

  Flash E28F128J3 @ 0 x 300, 16 MB

  BIOS Flash AM29F400B @ 0xfffd8000, 32 KB

  Hardware encryption device: VAC + (Crypto5823 revision 0 x 1)

  0: ethernet0: the address is 0015.625a.f7da, irq 10

  1: ethernet1: the address is 0015.625a.f7db, irq 11

  2: ethernet2: the address is 000d.8810.902c, irq 11

  3: ethernet3: the address is 000d.8810.902d, irq 10

  4: ethernet4: the address is 000d.8810.902e, irq 9

  5: ethernet5: the address is 000d.8810.902f, irq 5

  Features licensed:

  Failover: enabled

  VPN - A: enabled

  VPN-3DES-AES: disabled

  The maximum physical Interfaces: 6

  Maximum Interfaces: 10

  Cut - through Proxy: enabled

  Guardians: enabled

  URL filtering: enabled

  Internal hosts: unlimited

  Throughput: unlimited

  Peer IKE: unlimited

  This PIX has a failover license only (FO).

  #sh run

  interface ethernet1 100full

  nameif ethernet1 inside the security100

  pixfirewall hostname

  domain testlan

  access-list acl_out permit icmp any one

  No external ip address

  IP address inside 192.168.1.222 255.255.255.0

  No IP failover outdoors

  No IP failover inside

  #sh int e1

  interface ethernet1 'inside' is up, line protocol is up

  The material is i82559 ethernet, the address is 0015.625a.f7db

  IP 192.168.1.222, subnet mask 255.255.255.0

  MTU 1500 bytes, BW 100000 Kbit full duplex

  Hi M8,

  Your firewall has a license of FO, you must enable this device to be able to see it.

  Run the command:

  active failover

  With this command, the device turns into the 'Active' from a perspective of failover state. It will work after that.

  See you soon.

  Salem.

• Satellite C50D-- Toshiba PC Health Monitor - can not get the type of Bios

  I've updated my Satelite C50D-A Windows 10 laptop that works very well.
  However, when I try to check Toshiba PC Health Monitor in hidden icons, it is a small box that appears who says: 'impossible to obtain the type of Bios' and the application goes no further.

  Y at - it a fix for this make health monitor work again?

  Concerning
  Roger

  Hello

  Update you the software Toshiba after the Win10 upgrade?
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  The Toshiba Health Monitor and other software like system TOSHIBA driver should be updated to compatible version Win 10

• Satellite L510 - PC Health Monitor - could not get the Type of Bios

  Hi guys,.

  I m appeal for some help and hope that some of you experts out there may be able to help me!

  My laptop is a Satellite L510 bought November 2009
  Windows 7 Home Premium SP1 32-bit
  The version of the BIOS/Date: INSYDE, 1.30, 08/05/2009

  Problems:
  1 ReelTime (worm: 1.0.04.0) TC00210100H stopped working about 6 months ago, so I uninstalled it.
  2 PC Health Monitor (worm: 1.4.0.0) TC00148300O

  Value Added Package: Worm: 1.2.25 (TC00214700E)

  For a couple of weeks stop would take a little longer than before and last weekend he just stopped even if the battery is fully charged.

  I had a bit of a job to resume but I finally did, I came to the conclusion even if the hard drive was not.

  I then tried to open the PC Health Monitor, but this error appeared impossible to get the type of bios and obviously wouldn t open. I uninstalled PCHM programs and features and then ran TC00148300O.exe of
  C:/Program Files / Toshiba / TOSAPINS / COMPS1 / TOSHIBA PC Health Monitor - 1.4.0.0, it seemed something was going on but ultimately nothing has.

  I dropped while I needed to sort first on the hard drive. Long story short, the hard drive has been replaced by a SSD 840 EVO 250 GB by a friend of TI at work.

  I prefer like to get ReelTime and PCHM working again correctly troubleshooting (with your help) that I put t really want to restore back provided that the factory, but if I have to...

  If I have explicit instructions on how to do that would be a big help (if necessary I can also get my friend to help me).

  If I n t give any other specific information that you need please ask. I apologize for this long post, but thanks to anyone who responds.

  Hello

  If you replaced the HARD drive I recommend you to install original recovery image and start using your machine with the factory settings. After that it all will again be OK. Install important Windows updates current, your important software and I think that everything will be OK again.

  Software related questions can sometimes be very complicated. All you can try to do is remove pre-installed application, restart the computer and try to install it again.

  On BIOS I can just say that you shouldn't change anything.

  One last thing: I don t know how important ReelTime and PC Health Monitor are for you, but I removed the two applications on my system. In my opinion there is no much help from both of them, but they CPU utilization for the unnecessary process.

• Satellite C50D - PC Health Monitor shows the low battery

  I bought a C50D a few days ago and noticed that when I ran the PC Health Monitor he showed the wear of the battery as poor. I tried a few full charge/discharge cycles and it does not seem to have improved the situation.

  Is this something that is likely to correct itself in the next a few charge cycles or could I have a duff battery - the health monitor is not too well to evaluate the battery charge.

  Ian

  New batteries must be charged and discharged several times in line to achieve the best performance.

  I'm not quite sure how many times you have to repeat this procedure but I recommend you monitor the battery working time m.

  Of course, battery working time depends on the use of the laptop, but you should be able to see the improvement.

• Satellite U940 - download Health Monitor

  Recently, I managed to updated the integrity monitor (which paradoxically the Heath monitor recommended).

  An error indicated there was "an older version installed", and I was advised to remove it all first. I did, doesn't have any path to be automatically informed of pilot and other improvements, including the health monitor.

  It seems that the health monitor has not saved the download file - it is not in the downloads. He recorded other places? He did not me, invites so the location is hardcoded, wherever she is.

  I only do that because a previous update of the bluff Health Monitor driver my touchpad driver.

  OK... you'd think I'd be able to download the new drivers manually, right? Alas not. My part number doesn't seem to be acceptable for the selector of downloads on the selector to THE Toshiba window, and even there is no model of U above U500 in the drop-down list of templates.

  So much trouble here!

  Can anyone suggest how I might have the correct setup file of Health Monitor for my Satellite U940?

  Thank you

  Hello

  Can you please post full model name and the part number of your laptop?
  I want to just check the Toshiba download page and try to find the right version to download.

• Satellite L50 - A - 14 M - Toshiba pc health monitor does not work

  Hello!

  I am new to this forum and I have a problem with my new toshiba satellite l50a - 14 m. I did a factory reset recently and the integrity monitor (whitch is an excellent program in my opinion) no longer works...

  When I opened it notify an error "Could not get the flag to enable sorts in the registry" and does not turn on.
  I have 8.1 64-bit windows;

  I tried to download versions more but do not work.
  How to do?

  Sorry for my bad English...

  TSRI means the Intel Rapid Storage Technology, and there is also a TSRI driver available on the Toshiba UE driver page.

  You need to update or reinstall the driver.

  I think this will fix the problem of pc health monitor

• Remove PC Health Monitor - Win8 stuck on uninstall manually

  I removed PC Health Monitor (including files and registry) such as requested by windows 8. However, the installation tells me he's always there.

  I can't work out why or find something on the net to reslove this problem.

  Sorry, but all this story is strange to me. To test objects I ve removed too much my U940 with Win8 and I ve done on a regular basis by using the option in programs and features. Everything was fine.
  I don t know what do you mean with uninstall manually.

• How get Toshiba Health Monitor?

  When I clicked on the nothing today Toshiba Health Monitor appeared, although the Service Station and Tempro are still OK.

  How in Hades to retrieve this tool practice?

  What do you mean with nothing appeared?
  Start this tool at all?

• PC Health Monitor and battery cover Satellite U940

  Hello

  I have a Satellite U940 on Windows 8.1.

  My question is if there is a relationship between the wear of the battery and the laptop on toshiba PC health monitor health.

  For now my wear and tear on the battery is at 50% of the full capcacity according to BatteryBar
  However, on the health monitor, it says that the health of my battery is good (full Green).

  I can only go out about 1.5 to 2 hours in the life of my laptop and just ask for help and information on the issue of whether I should buy a new battery or is at - it something wrong with my reading of the battery.

  Thanks for reading this.

  > Now my wear and tear on the battery is at 50% of the full capcacity according to BatteryBar
  However, on the health monitor, it says that the health of my battery is good (full Green).

  The health of the battery shows you the State of health of the battery and not the State of battery charge.

  > I can't get about 1.5 to 2 hours of life out of my laptop
  Battery working time depends on the use of the laptop. What does that mean?
  Well, run the heavy performance software (games, video editing software, etc.), using the brightness of the light display or DVD movie playback would drain the battery quickly.

  1,5 - 2 hours of battery time is not bad. But of course; sooner or later each battery must be replaced. It s just a matter of time.

• Portege Z10T-A140: Toshiba Health Monitor shows bad battery

  Hello

  near 1 week old I am a Z10T-A140 ultrabook.
  Then I active Toshiba Health Monitor and can view HARD drive status.

  But to see the battery, it's bad!
  Why my battery see the poor?

  Thank you.

  Hello

  It is not unusual for new batteries.
  You know that batteries must be calibrated first to achieve the best performance.

  Calibration means that the battery must be fully charged and discharged and then until it s completely empty. This procedure should be repeated several times in the line. After that, you can check the status of the battery provided by new health monitor

• Tecra A11 - Battery Health Monitor - Message: unknown

  Hello

  PC for my TECRA A11 - 12F battery health monitor (2 weeks) shows an unknown messageheatlh.
  If anyone else has had a similar problem and has it been resolved?

  What happens when you start laptop without battery and when the OS is battery charge will be added also? Battery is correctly recognized?
  In any case, the update of the BIOS is good solution.

  If you are not sure that you you need or how to update BIOS let us know.