Pix 515E, VERY basic question

Similar Questions

• Entities does not Contribution - very basic question

  Hi guys,.
  
  My apologies for this very basic question: I am very new to Hyperion, with just one week of training! Anyway, I'm building a basic model and have noticed that my features are not in the dimension value roll altogether the [Contribution]. This means that entities do not roll upwards!
  
  It was suggested that problem was that I needed a Sub consolidate in the rules, but I put the attribute 'ConsolidationRules' = n. In the documentation it is defined as "N to use the consolidation by default and eliminations".
  
  I was wondering is there anything else that is needed to use default groups, or do I need to create rules?
  
  Thank you
  G

  Why do you think that's not driving? If your building rules are set to "n" you don't need rules.

  Make sure that your presentation was made to IsConsoldiate. Make sure that you're displaying a "Parent.Child" to total Contribution.

• Very basic question :) in the forum

  :)
  
  I don't know her like a basic question, but struggling to get this straight all in detachment.
  I just wanted to know the steps to connect the text into a hyperlink when validating responses...
  
  If someone can solve the example: here_ "go-ahead" should be a hypertext link and the link should point to google.com
  
  See you soon,.
  Manik.

  Something like this:

  [url http://oracle.com] Oracle

  How to write on it?

  [url http://oracle.com]Oracle[/url]
  

• Very basic question I think?

  Hi im very new to flash, but I'm looking to learn more about it, I tried to use the pre-built Flash components and I was just wondering where and how you can retrieve the values in the boxes checked
  
  I know how to check using the 1 box
  
  If (instancename.value = true) {}
  trace ("box has been checked");
  }
  
  but I want to run through a series of 5 boxes and retrieve all the labels in a first time, I can probably work on verification, if they are checked, but all the I get filament is not set which, I guess, no value.
  
  This is the code I used to try to recover all the labels of each box at the press of a button
  
  We (Release)
  {
  trace ("clicked");
  var i = 1;
  
  While (I < 5) {}
  trace ("Running while");
  i ++ ;
  trace ( check box. Label);
  trace (i);
  
  
  }
  
  }
  
  It would be more appreciated if someone could point me in the right direction for tutorials very basic on the flash components that I could find only the macromedia livedocs that I have not found a lot of help as his technique to speak which I am not yet familiar with...
  
  Thank you Pinky
  

  Hmm, I hate these sensitive submit buttons when they take too long to process your response if you click it again and it deals twice so it seems you spamming the forums: S lol

• Very basic question: Flash Media Server vs embedding flash video

  I hope it's a quick easy question to answer:
  
  What is the difference between Flash Media Server or simply using a freeware Flash media player (like Flowplayer http://flowplayer.org/) that uses XML playlists to embed your Flash videos on a Web site?
  
  What are the benefits of Flash Media Server and how something like Flowplayer not issues that the FMS can?
  
  Thanks in advance!
  
  Erik

  In a word flowplayer offers the video through your web browser. It does so via the HTTP (port 80) and on any web server progressive download

  Progressive download concludes the video on the server and played through the player it is being downloaded. 2 important things to take this are 1, the video is downloaded to clients, at the end of reading's hard drive, they will have a copy of your video that they can do what they want and repost it somewhere else. 2, it plays as it downloads, which means that if I see a video of 10 minutes on your site and want to skip to the middle or the end I have to wait for the entire video to download before viewing these segments. Your host, incidentally you will love for progressive download because it will appear as if your transfer rates went through the roof. Once demand for the video made it has not returned back, the customer gets all if they watch it or not.

  Flash media server using rtmp Protocol. This Protocol is an open protocol socket through port 1935. Essentially, it's a two way street. When the user views a video using FMS get basically just enough video to keep the connection open and satisfy the buffer necessary to ensure a clean reading. Bytes of info that carry the video go only to the memory of the users, not the hard drive. This allows the user to come and go around the film without having to wait for all to download.

  Hope that helps.

• A very basic Question of practice

  Hello

  I would ask, by my knowledge of the component of ADF layout, conversion from a static design in Pages ADF Model/layout means actually build from scratch, because we have to use all the tags like StretchLayout/PanelLayout, etc... However the static design are mainly some html tags, I know it's common when convert static design to the dynamic, just want to know if there is some magic/innovator of do in the ADF, thank you very much.

  -Liang Yi

  If your static design consist only of html tags, you are right that you have to build templates or pages from scratch using the adf framework available containers.

  There is no tool that I know who does this automatically, but you should be able to see some models that you can transfer in disposal containers. A good starting point is this doc http://www.oracle.com/technetwork/developer-tools/adf/learnmore/adffaceslayoutbasics-2046652.pdf

  Timo

• A very basic question

  Something was bothering me for some time now.  I used ACR for several years but never found what I look at when I open an image in ACR.   I understand that the RAW image is the image not transformed with settings that can be applied - what I understand is metadata that can change the parameters of the image and nothing is actually changed except these instructions of metadata.   SO - what we look for when we see an image in ACR.  I don't see a lot of zeros and a few - I see a picture: it must therefore be an interpretation of metadata.    So what gives us the image?  What is a jpg preview or what?  Something was done to allow us to view the RAW data.   Can someone enlighten me please after all these years.

  Thank you very much

  To get just a little more technical, something similar to the following occurs:

  • The raw data, which is not organized as a picture at all in most camera files, are read from the disk and interpreted in a block of pixels of RAM in your computer.
  • Different Camera Raw controls are applied to the pixels in the RAM memory.
  • The pixels of the RAM are sent to your video card to display on your monitor.
  • Whenever you modify a control, all or part of the process that precedes repeats.

  Modern computers are so fast they can do the above, which includes literally billions of transactions, in the blink of an eye!

  It is, of course, extremely simplistic for clarity.

  -Christmas

• Client Oracle / 10 g ORACLE_HOME / very basic Question

  Hi all
  
  I am a little bit confused about something for installating the Oracle DB and his Client on the same computer, Windows (Vista Business, 32-bit).
  
  In the release notes, it is said (4.3), you can install the Oracle Client in the House of the same version as the database.
  In the installation instructions, it is said, • "You must install the Oracle database Client in a new Oracle Directory." (Article 3).
  
  FIRST QUESTION: OK even if the notes of publication wins installation, I'm assuming (am I right here?) you CAN install the client in a separate House?
  
  During the installation of the database, there is an instruction to create the ORACLE_HOME environment variable. This is repeated in the installation of the hotfix. When I installed the client - in a separate House - UI deleted environment variable because "is not necessary for all Oracle products."
  (I realized after the fact that the installation of the database and the client before installing the patch would have been better.) SO-
  
  SECOND QUESTION: Should I create the ORACLE_HOME environment variable. and if so, for which the House, when I install the patch for the customer?
  
  Thank you
  
  Edited by: DonnaF May 21, 2009 10:50

  When you install the client, yes it's true, it must be installed in a separate Oracle home. The only reason why I found to justify the installation of Oracle client under the same roof of Oracle RDBMS is due to the availability of administrative tools. In previous versions (9iR2) when the installation took place he installed Oracle Enterprise Manager as well as the RDBMS Oracle Home. From 10 gR 1, Oracle Enterprise Manager (thick java client) is no longer installed with the database, but if you need to install it, you need not create a separate Oracle home.

  Now why you want to install the OEM heavy customer when DBControl EM is available in 10g? The reason because if you want to use Oracle streams, those can not be set in EM DB control, as well as the for replication option, it is not available in EM DB control. So you will need to install the client. One more reason? If you ever plan to set up Enterprise User Security and virtual private database, then will need you the tools to manage the E.U.S. and the OPM (Oracle Policy Manager). Those that are available only in java heavy client mode.

  So, if you don't need these administration tools, and you don't plan to use, you can perfectly live with the RDBMS as is.

  * ~ Madrid *.
  http://hrivera99.blogspot.com

• A very basic question dialogue IRT and the message boxes...

  What is the difference between a dialog box and in a message box?

  What the heck is a palette window?
  I'm quite confused...

  I'm quite confused...

  Need a glossary?

  http://msdn.Microsoft.com/en-us/library/Windows/desktop/aa511441.aspx

  (BING search engine for)
  WINDOWS glossary dialogue addressed
  )

  HTH

  Robert Aldwinckle
  ---

• A very basic question about the shared storage

  To implement GR 11, 2 in Sun SPARC 5.10, our sys admins have allocated block devices in the shared storage and they sent us a letter mentioning the disks. This is what looks like their mail
  
  Storage attached with the Node1
  

  /dev/rdsk/c4ikdzs3
  /dev/rdsk/c4ikdzs4
  .
  .

  Storage attached to Node2
  

  /dev/rdsk/c5ikdzj2
  /dev/rdsk/c5ikdzj5
  .
  .

  When I connect with the Node1: / dev/rdsk, I see

  /dev/rdsk/c4ikdzs3
  /dev/rdsk/c4ikdzs4
  .
  .

  as they have said. Same for Node2
  
  
  But all raw devices mentioned above should be visible at/dev/rdsk of nodes. Right? Isn't that whole point of CARS; Shared storage ?

  resistanceIsFruitful wrote:

  But all raw devices mentioned above should be visible at/dev/rdsk of nodes. Right? Isn't that whole point of CARS; Shared storage ?

  Not exactly, if you are referring to the names of devices...

  Each core will make a discovery to support when starting. When dealing with the LUN through one HBA (or similar), there is absolutely no guarantee that the nuclei will detect the LUNS in the same order and assign the same scsi device names to them. A LUN can be called device-foo-1 on a single server and device-foo-21 on another.

  In addition, several HBAs will be dual port and dual fiber running channels. So, not only is the same logic unit seen as a scsi device, different number of each core but you can see more than once. Device-foo-1 and device-foo-33 may be the same physical LUN on server 1.

  To solve this logical device name is required. This will be the name of the same device on all servers - and that it will support multiple paths of I/O to the LUN in turn seamlessly. This is done by looking at the unique signature of the SCSI - called WWID or World Wide nameof the software "special driver. With this unique signature, s/w only recognizes a specific LUN, regardless of what server s/w runs on.

  This s/w is called Multipath on Linux, EMC Powerpath and so on. I expect that you will have something similar on your servers.

  Scsi device that is mapped by the kernel to the unit number logic is not used. In the case of multipath , for example, use the + / dev/mpath/mpath+ devices. In the case of Powerpath, these will be + / dev/emcpower+ devices.

  What are the names of device you will use to 11g Grid Infrastructure and Oracle ASM and RAC installation and configuration of shared storage.

• Very basic question about the images in tables

  So I made 4 buttons, 90 pixels wide by 20 pixels high each in photoshop. Then, I made a table 360 pixels wide by 20 pixels high in DW to make a small nav bar. Then I placed the 4 buttons in the table. Why is - it is showing only 366 pixels wide and when I saw the navigation bar on a browser that the 4th button down to the second line. There is no padding or margin adjustment so I wonder why it isn't an exact?
  

  27/09/06 20:47, "614mike" wrote:

  > So I made 4 buttons, 90 pixels wide by 20 pixels high each in photoshop. Then
  > I
  > done a width of 20 pixels high in DW to make a small nav bar table 360 pixels.
  > Then I placed the 4 buttons in the table. Why is this it is showing only 366 pixels wide
  > and when I saw the 4th button browser navigation bar falls down to the
  > second line. There is no padding or margin so I wonder why it is not a
  > exact fit?
  >
  >
  In fact said 0 padding and margin 0, or are you assuming that
  There is no padding or margin because you do not specify any?

  Most browsers use a padding by default and margin applied when you
  don't specify anything whatsoever, and it varies from a browser. Try
  specifying 0 padding and margin 0, if you do not already have.

  --
  Ghizlaine

• Very basic question about how to speed script CLEARDATA.

  CLEARDATA:
  ========
  Hi there, the two scripts will cause the same, but the following, which is faster (1) or (2)? Assuming that the data and the same sets for each. Thank you!
  
  
  CACHE ALL TOGETHER;
  SET CACHE HIGH;
  SET AGGMISSG
  SET HIGH LOCKBLOCK;
  SET CALCPARALLEL 4;
  UPDATECALC OFF SET;
  
  (1)
  DIFFICULTY (& InitPeriod: & ActualPeriod, & ActualYear, & CalcScenario, "WorkingInput")
  @IDESCENDANTS ("business district"), @IDESCENDANTS ("CC"), Fix (@IDESCENDANTS ("Entity"), @IDESCENDANTS ("Product")) <-sparse Dimensions
  CLEARDATA "USD";
  ENDFIX
  ENDFIX
  CLEARBLOCK VACUUM;
  
  
  (2)
  DIFFICULTY (& InitPeriod: & ActualPeriod, & ActualYear, & CalcScenario, "WorkingInput")
  CLEARDATA "USD";
  ENDFIX
  CLEARBLOCK VACUUM;

  CACHE ALL TOGETHER;
  SET CACHE HIGH;
  SET AGGMISSG
  SET HIGH LOCKBLOCK;
  SET CALCPARALLEL 4;
  UPDATECALC OFF SET;

  DIFFICULTY (& InitPeriod: & ActualPeriod, & ActualYear, & CalcScenario, "WorkingInput")
  DIFFICULTY (@RELATIVE ('entity', 0), @RELATIVE ("Business Area", 0), @RELATIVE ('CC', 0), @RELATIVE ("product", 0))
  CLEARDATA "USD";
  ENDFIX
  ENDFIX
  CLEARBLOCK VACUUM;

  Fixing Level0 blocks like the above calc data erasure
  Loading new data
  Setting the update rollup on Aggmissing
  The Total process takes less time compared to
  Deleting the data for all levels
  Loading new data
  ROLLUP

• 2 very simple questions about 6225 PCI card

  Hello world

  I use for the first time a card PCI of 6225 (80 all entries). This card is linked to two junctions of SCB-68 block and my goal is to use it to acquire 40 Equations signals. Using the wizard DAQ, I came to these conclusions:

  1) the first 8 of my 40 Equations entries go out first to a block?

  (2) the block junction n ° 1 for each differential signal, I need to put a bias resistor 10 kohm between each AIGrnd and the V (-) signal. That's what I did with the other cards X 622. To do this with block n ° 2 too, I have that pin n ° 22, 9 and free to use all of my 32 43 signal. Is this correct?

  I know that these are 2 very basic questions, but if someone could just answer for confirmation, it would be great.

  Thank you very much

  Kind regards

  User

  Hello

  (1) the 8 first entries go to the 1st exit of block as this pdf for Connector 0 shows.  For the last pin of the Connector 1 you will find the information in the screenshot below:

  

  (2) according to your source impedance, you must connect your source as described in figure 4-5:

  

  Or 4 to 6 of the l M-series user manual(page 4-15 to 4-18, so with a coupled polarization resistance also between the positive terminal of the source and AI GND).

  Then if you have a noise problem, you can follow these documents:

  How to eliminate ghosting of my measurements?
  http://digital.NI.com/public.nsf/allkb/73CB0FB296814E2286256FFD00028DDF?OpenDocument

  Reduction of the impedance of the Source of an analog input Signal
  http://digital.NI.com/public.nsf/allkb/CF83426BC3AC514A86256C10005A4771?OpenDocument

  With the help of a Gain (voltage follower) unit with DAQ hardware buffer
  http://zone.NI.com/DevZone/CDA/tut/p/ID/4494

  I hope this helps.

  Kind regards

• Basic questions about the port of Vsphere mirror

  I set up a lightweight VM that would deal with inter-VM traffic. To do this, I want to activate the duplication of port between virtual machines.

  
  

  I have ESXi 5.5 Update 1 installed, use the Vsphere (no webclient) client. I see no duplication of port capacity on my Vsphere Client

  

  I have some very basic questions:

  (1) all documentation I've read involving 'Port mirror' is done via web Vsphere client. Vsphere is provided with Vcenter (please, correct me if I'm wrong)

  (2) only functions with "Distributed Virtual Switch", not "switch vSphere Standard" port mirroring. How can I activate "Distributed Virtual Switch"? What products can I download/install and try (suppose I go to the user a license for 60 days)

  (3) exist what API to enable/disable/setup Port mirroring?

  (1) all documentation I've read involving 'Port mirror' is done via web Vsphere client. Vsphere is provided with Vcenter (please, correct me if I'm wrong)

  Because the mirror of port requires a distributed switch, you will need to vCenter Server and once in vCenter Server, you can the vSphere Web Client of the user or the vSphere Client (c# version).

  (2) only functions with "Distributed Virtual Switch", not "switch vSphere Standard" port mirroring. How can I activate "Distributed Virtual Switch"? What products can I download/install and try (suppose I go to the user a license for 60 days)

  You can download the server vCenter Server (60 day trial) and you'll have an Enterprise Plus version for your ESXi host vSphere.

  (3) exist what API to enable/disable/setup Port mirroring?

  Check the comments of this blog: http://blogs.vmware.com/vsphere/2013/01/vsphere-5-1-vds-feature-enhancements-port-mirroring-part-1.html

• Basic question - graphic legends in the heads side

  Hey,.

  Hooray, my company eventually got Framemaker, and I am now in charge of the control of FM and fall all our old content FM. I'll use it to create our manual of the product.

  Anyway, what I do is align text in the heads side with graphs in the main text column. As follows, from the old manual:

  

  So far, I tried to create a paragraph tag that sets the text in the head to one side. It works, but I can't align the text of the head to one side with the chart. (The paragraph Designer options seem to allow only aligning the text side-head with other paragraphs, no graphics).

  So, given that our manual is full of graphs that need aligned beside text, what is the best approach?

  
  Thank you very much. I know it's a very basic question.

  Ian

  A fairly standard practice with framework is to create a paragraph tag that is used only as a part of positioning to hang frames anchored (with images) and tables. The font size is usually set to something like 2 or 4 points, so that it fits in the documents without adding white space. And he never actually wears text.

  So if you create an anchor tag and anchor your chart it, you should have a tag to align a sidehead against.

  However, if it was me, I probably hang a picture two-column a row of my anchor tag and the graphics of the pop in a cell and a legend in the second.

  See you soon,.

  Art