PIX with ACB?

Similar Questions

• Palm Pixi with Verizon = no ringtones?

  I have a Pixi with Verizon. I tried to buy ringtones using the Verizon Internet site even as I always did. But after that I bought a the message met the rington was abolished and that my phone does not support happy purchaseing copyrighted. All other Verizon phones, I have had my own ringtones. I'm really starting not to like this phone.

  Hello and thank you for using the Palm Help Forums!

  I'm really sorry to hear about your problem. You should not have problems to download ringtones from Verizon, but if you are, I recommend contacting Verizon. The reason why I say that is because they manage the site in which you download from. They may be able to shed more light on why you have this problem with the Pixi.

  HOWEVER, I have a really, really, really tip I would share with you.

  Create a new ringtone

  To create new ringtones, you must first move audio files in a format supported (MP3, AAC, AAC +, AMR, QCELP and WAV) from your computer to your phone. All MP3 files you already have on your phone (for example, files downloaded from Amazon MP3) can be used as ringtones, as long as the files are in the folder ringtones on your phone. To find the ringtones folder, open the Launcher, tap sounds, ringtones.

  Move audio files to your phone by doing one of the following:

  • With your phone in USB Drive mode, add audio files to the folder ringtone on your phone.

  I hope this information is useful.

  -Pat

• PIX with H & S VPN DMZ hosting web server to the hub

  Ok

  Heres a problem which I think would be quite common for these even remotely conscious of security. Unfortunately, my knowledge of the PIX (as well as other Cisco devices) is still in phase of 'growth '.

  So, here's the problem. I have a WAN put in place with PIXen and SonicWalls, we are set up in a design essentially Hub and Spoke (fine ok so it is partially meshed). We recently decided to pull the trigger on getting a 'real' web site and everything went relatively well that getting up and rolling. (even with my notice of 3 days/deadline), but here's the problem: I set up the web server on the DMZ to the hub pix, and I figured out (the easy part) how to set things so in the Home Office, people can connect to the web server by using the internal address, but I don't know what to do for people in remote offices with VPN home connections. I tried to define static routes, I tried to add the DMZ to the VPN trigger, I tried to do both of the last things together, and I checked that I have rules allowing traffic to the VPN outside the DMZ on the inside. So, what else can I I get?

  I have no problem by configuring a PIX for all basic ups and VPN even at this stage, I can do most of it through the CLI (even if I still want to do more through the PDM). My biggest stumbling block on the PIX has so far was when I actually involve this pesky DMZ...

  I actually two PIX in my office, two for my network domestic (one for my place in the States and one for my place in the Japan), so if you can help me, I'll be the two problems and do not forget to give a rating of excellent reviews!

  so I guess that leaves me to the place where I scream...

  Help!

  and I humbly await your comments.

  the current pix configuration should look at sth like this,

  IP access-list 101 permit

  IP access-list 110 permit

  Global 1 interface (outside)

  (Inside) NAT 0-list of access 101

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  Permitted connection ipsec sysopt

  Crypto ipsec transform-set esp-3des esp-md5-hmac superset

  myvpn 10 ipsec-isakmp crypto map

  correspondence address card crypto myvpn 10 110

  card crypto myvpn 10 set by peer

  superset of myvpn 10 transform-set card crypto

  interface myvpn card crypto outside

  ISAKMP allows outside

  ISAKMP key

   address netmask 255.255.255.255
  
  isakmp identity address
  isakmp nat-traversal 20
  isakmp policy 10 authentication pre-share
  isakmp policy 10 encryption 3des
  isakmp policy 10 hash md5
  isakmp policy 10 group 2
  isakmp policy 10 lifetime 86400
  now, to add dmz on top of the existing vpn, add the following to the pix (and apply the same concept on the remote end device)
  access-list 102 permit ip
  access-list 110 permit ip
  nat (dmz) 0 access-list 102
  

• in PIX with SSH connection issues

  Hello

  I have a PIX 506 running OS 6.2 (2) which is located in a demilitarized zone known as the PIX from the outside. It's behind an another PIX506 (PIX inside). The two PIX have Ganymede + configured for authentication of the connection.

  Last week the outdoor PIX crushed physically and I replaced it with a spare PIX part and he completely reconfigured.

  Now I can't connect to this outside PIX using SSH, despite the list of access inside PIX is correct and can SSH and Ganymede +. However, I can telnet to it.

  I use Putty to connect and when I start the session SSH from the PIX, the login window appears and disappears immediately without having the time to do anything myself.

  Any help would be greatly appreciated. Thanks in advance.

  A.G.

  ##################################################

  Inside PIX config:

  access-list inside allow TCP Company-Interior-Net 255.255.255.0 host outsidepix-Interior-interface eq ssh

  list Company-Interior-Net 255.255.255.0 access inside permit tcp host eq telnet interface-inside-outsidepix

  access-list inside allow the ICMP messages to echo DMZNet 255.255.255.192 Company-Interior-Net 255.255.255.0

  access-list inside allow Company-Interior-Net icmp 255.255.255.0 DMZNet 255.255.255.192 - response to echo

  dmzacl list of access allowed icmp echo host outsidepix-Interior-interface company-Interior-Net 255.255.255.0

  dmzacl list of access allowed icmp host outsidepix-Interior-interface company-Interior-Net 255.255.255.0 - response to echo

  access-list permits dmzacl tcp host outsidepix-Interior-interface host Ganymede-server1 eq Ganymede

  access-list permits dmzacl tcp host outsidepix-Interior-interface host Ganymede-server2 eq Ganymede

  The outdoor PIX config:

  GANYMEDE + Protocol Ganymede + AAA-server

  AAA-server GANYMEDE + (inside) host Ganymede-server1 1234 timeout 10

  AAA-server GANYMEDE + (inside) host Ganymede-server2 1234 timeout 10

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  Console telnet authentication GANYMEDE AAA +.

  the AAA console ssh GANYMEDE authentication +.

  AAA authentication enable console GANYMEDE +.

  Telnet Company-Interior-Net 255.255.255.0 inside

  Telnet timeout 5

  SSH-company-Interior-Net 255.255.255.0 inside

  SSH DMZNet 255.255.255.192 inside

  SSH timeout 5

  did you follow the steps to configure ssh? the domain name and host name is defined on it? CA has generated you any rsa... to create the encryption keys?

• PIX with VPN to Checkpoint with overlapping subnets

  I have a client with a PIX runs code 6.3.

  They need establish an IPSec Tunnel for one of its customers with a Checkpoint firewall.

  Both organizations use 10.1.0.0/16 and I'd like to nat to 10.180.0.0 Home Office 16 and the remote client to 10.181.0.0.

  The document on the site Web of Cisco PIX and VPN concentrators is less useful. I don't think the text describing the image is correct.

  Help with ACL and static NAT is greatly appreciated.

  Frederik

  Apologies, should have asked. Which office has the pix and the control point. I write this as if the two ends were firewall pix so that's fine and we can see if that helps.

  Remote endpoint

  ==========

  NAT 10.1.0.0 ip access list allow 255.255.255.0 host 10.180.1.103

  NAT (inside) 3 access list NAT

  Global (outside) 10.181.0.0 255.255.0.0

  NOTE: You could really just NAT addresses 10.1.x.x from source to a global IP address rather than the whole 10.181.0.0/16 up to you.

  Your card crypto access list must then refer to the addressing of Natted 10.181.x.x rather than the 10.1.0.0 address.

  vpntraffic list access ip 10.181.0.0 255.255.0.0 allow host 10.180.1.103

  Main office

  ===========

  crpyto-access list should read

  vpntraffic list allowed access host 10.180.1.103 ip 10.181.0.0 255.255.0.0

  And you will need a static translation for client access

  public static 10.180.1.103 (Interior, exterior) 10.1.1.103 netmask 255.255.255.255

  Does that help?

  Jon

• VPN between PIX with dynamic IP

  Can I make a VPN over the Internet with PIX or IOS VPN in each IP address dynamic and extreme (DHCP client) in the two extremes?

  Thank you

  If siempre sepas than las direcciones los extremos back there sets in el momento iniciar el tunel in peripheral los.

  Distinto are TR UN extremo tiene IP fija y el otro dinamica (vpn easy for example you can help ahi)

  --

  Alexis Fidalgo

  Systems engineer

  AT & T Argentina

• PIX with or without ISA

  Any opinions on the need to maintain an ISA with a PIX on the network server? ISA Server was acting as a proxy/firewall, but I don't think that I really need more.

  Thank you

  It's you, but two firewalls is safer than one (it is also a good confyguration: two firewalls from different suppliers). If you are using isa as server cache more use it as a firewall...

• Telnet on PIX with the external interface

  Is there a way to telnet in PIX Firewall through the external interface?

  SSH is a valid method to access the site, but I wonder if there is another way to do it. PDM is another tool for access and modification of the configuration.

  Any help will be useful.

  Best wishes

  Onur

  I'm pretty sure that Telent directly to the external interface of a PIX is not available. It is such a big security risk that it is not offered as an option.

  SSH is a much better way to go (even if it's only SSH1).

  You can probably VPN in your network and Telnet from inside.

  Good luck

  Scott

• Palm pixi with O2 web load when I access the wen how to stop this?

  My Palm Pixi Plus guard internet connection and it cost me an amount of data costs high, is anyway that I can stop doing that? and I'm not able to click on the 02 logo to change the settings of data until I do? need a happy asap!

  -Open the phone application

  -Press on upper left corner (o2 - uk for me it says)

  -preferences

  s ' ensure that data usage is set to off (i've got until and data roaming off, do not know if that makes a difference)

  It worked for me

• PDM with PIX 515 does not work

  I just upgraded our PIX 515 of 6.1 to 6.2. I also added support FOR and loaded the version 2.1 of the PDM. I am trying to browse the MDP, but I can't. What Miss me?

  Hello

  have you added the following lines to your config file and have you used HTTPS to access the pix (http is not taken in charge, only https)?

  Enable http server

  http A.B.C.D 255.255.255.255 inside

  A.B.C.D is the ip address of the host from which you are trying to reach the pix with the pdm.

  If you're still having problems after the addition of these two lines, you might have a look at this page:

  http://www.Cisco.com/warp/customer/110/pdm_http404.shtml

  Kind regards

  Tom

• Problem of recovery of password with pix 501

  Hello

  my organization uses a firewall 501 pix with version 6.2 of the software. After I lost the password I tried earasing using the faq provided on this site (using the file np62.bin through a TFTP server).

  Unfortunately, I can not connect using the password default "cisco."

  Thank you

  Raphaël Cohen, University of Tel Aviv

  Hello Raphael,.

  You need to connect to the PIX via the port on the PIX console. If you deleted the passwords, then (as mentioned before), there is NO password to access privileged EXEC access just don't hit back, now, you will need to configure a password to "enable" with command > pix # enable password - the password is case-sensitive and can be a combination of characters and numbers the length of the password is limited to 16 characters.

  You can now set access telnet as well i.e. config mode > pix (config) # telnet [masque_sous] [interface_name]

  example: (in config mode) telnet 192.168.10.10 255.255.255.0 inside

  Good idea to use the static IP address for the above, makesure to save your config with cmd: write memory

  Hope this helps - Jay

  PS. Thanks to vote this post if it helped you so that other members can use it if they have the same problem you have - that helps! Thank you.

• dynamic rollover with connection cable between pix

  Hi I have a strange doubt probably silly. I have 2 pix 515E all identical abt them.all ports are 100 Mbit/s. I want to Setup failover stateful s them. can I connect the 2 pix with a crossover between the then cable and affecting their full duplex. is - this possible.or requires the switch between them as mentioned in the books. pls help me. Thank you in advance.

  Assane

  No, you do not have a switch, you can use a crossover for the link of the State cable and set the duplex and speed you want.

  sincerely

  Patrick

• PIX NAT using ISP2?

  I really doubt that there is a solution, so I'm challenging all you network gurus {wink}

  I have two ISP come in. At the present time, I have ISP2 bypassing the firewall with its own router.

  Now, I would be more effective. I'm consolodating my two ISP of for a router tonight.

  I know that the PIX won't do any kind of routing based on the policy, but I would NAT overall out isps1 and all static NAT review ISP2.

  Possible? I am open to all ideas.

  The problem: My incoming HTTP traffic has swallowed up all my other traffic. Now, I can't control the side ISP of the router and placement QoS is outgoing (obviously, if it hit my incoming interface, he has already had the bandwidth).

  I would like to move (based on my global users to NAT) inbound HTTP to isps1 and all my static entries to ISP2.

  I be wishing on a star here, because I did not come with good ideas, as the firewall is not as flexible as a router (which is probably a good thing in General).

  Thank you very much!

  Hello

  You have a few possibilities here...

  First; You can indeed make some QoS on your entrants, but it will be effective on TCP sessions (which seem to be the majority of your traffic). With the help of DAVID during the development of inbound traffic will allow backoff TCP and lower pressure... You'll just have to handle the bandwidth of the interface parameter and the shape accordingly.

  Second; The problem with the PIX is that it cannot have * one * default gateway and it does not ACB. Therefore, you will need to use external routers to do this work. If you have a control on the access routers to the Internet service provider, you can do the movement of traffic "easily." You * will * need a router (can also use two) between your PIX and the ISP. This router may very well be the access router. If you use a router, that router will have a total of three interfaces (one to each ISP and the other for the PIX). If you use two routers, each need two interfaces (an Internet service provider, to PIX) and a switch/hub to interconnect.

  I guess you have public IP addresses on the PIX and have a set of each ISP.

  Do your usual thing on the PIX with these addresses, using an ISP - game for the PAT of users and other set - ISP for your static outbounds. Now on your access to the ISP router, use PBR to choose the correct ISP based on source from your PIX address.

  If you use two routers in parallel, one at each access provider, you need to configure an HSRP for the PIX address to use as the front door and to the ACB on each router.

  I would like to know if it's too abstract.

  Did she help? In the affirmative, please write it down.

• Palm Pixi (Sprint) problems

  I tried to get on Live Chat, but it seems to be declining.  I'll try to be brief and detailed.

  I got a Pixi just over a week.  From the word go it seemed really slow.  When I press on an application, the lighted icon is sitting there for at least 3 seconds and then the app delay following charge.  If I have 2 loading apps it gets almost insensitive.  I restored the Pixi with webOS Doctor and the problem still persists.

  This sounds like a hardware problem?  Is there anything else I can do to isolate S/W or H/W?

  What accounts you have synchronized with the pixi? (google, facebook, yahoo, Exchange, etc.) ? I would start all first remove those if you had several to see if its related to one of them.

• By default static route with recevied BGP default route

  Hi guys;

  I have a problem and I don't know how to find or solve it.

  My chart is attached, please check everything first.

  Secondly, I have a multihomed BGP with two Internet service providers, I received two ISPS via BGP default route.

  Now, I have two types of IP addresses as follows:

  1 - my own prifixes, who has recorded with my ACE

  2 - iPs purchased ISP2.

  I have two networks, the first will contain my own prefixes and second will contain my prifixes ISP2. so I have to go on the internet, static route by default to the ISP2 need and that's fine, now the problem that carry the second defect I received two ISPS in routing however my table if I show ip bgp I see that I received it, but because of favorite and distancing China he disappear the default road statistics.

  so now a network is already online and the second network that contain my own IPs is out of service, of course this second network I need to routed to my isps1 via bgp and when isps1 down, go through ISP2 and I do using weight and as path prefix.

  Thank you

  Hi Nathan,

  With ACB option, you config-route map is your own prefix and set its next hop ISP 1 and 2 PSI when ISP 1 IP is not accessible. Apply the road map to interface with Network1. ACB is processed before routing.

  With option VRF, put the Network1 interface and isps1 VRF1, so it will have separate routing table. Under the vrf1 you static default config with higher AD and the next hop pointing to ISP2 in the global routing table. This will be used when you lose by default isps1. Because separate ridges VRF table routing, so netwoek1 will use the default route in vrf1 to isps1 as primary, the Network2 use ISP2.

  HTH,
  Lei Tian

  Sent by Cisco Support technique iPhone App