PIX506E basic configuration

Similar Questions

• Basic configuration of TFS 2012 fails on the data layer.

  Hello

  I have a new installation of sql server 2014 and has the last update 7 on it.

  Installed TFS 2012 update 4 and I tried the basic configuration to help start Wizard.

  I am getting...

  "TF255146: Team foundation server requires SQL server 2008 Rs (10.50.1600) or higher." The SQL server instance xxxxxxx you provided is the version 12.0.2495.0.

  I couldn't find much online research help. Any ideas how to solve this problem?

  Thank you

  Vinciane

  
  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Aironet 1600 I have the Basic Configuration

  Hello, someone to share the basic configuration to a SSID and security with WPA with the phrase password not numers

  Because I have a problem, I can only see the SSID if I put on the guest mode.

  Excellent.  You can disable the 2.4 Ghz on the AP all together.

  If you think that I helped it would be great if you could evaluate and score the answer.

• What are the basic element of basic configuration of an oracle database?

  What are the basic element of basic configuration of an oracle database?

  It consists of
  one or more data files.
  one or more files of control.
  two or more redo log files.
  The database contains
  multiple users/schemas
  one or more rollback segments
  one or more storage space
  Data dictionary tables
  User objects (table, index, views etc.,)
  The server who access the database consists of
  SGA (dictionary database Cache buffers, a Redo buffers of the newspaper, shared pool SQL buffer)
  SMON (System MONito)
  PMON (Process MONitor)
  LGWR (LoG Write)
  DBWR (data writing)
  ARCH (archive)
  CKPT (Check Point)
  RECO
  Dispatcher
  Associate the user with PGS process

• Basic configuration of 4402 WLC

  I have a WLC4402 attached to the trunk switch port 2950. The switch has 3 VLAN, 300, 400 and 500. Management and AP interfaces are marked on 500. I use a router 2600 on a stick that is also connected to the 2950 through another trunk. The AP Manager and IP address management are 172.16.20.1 and 172.16.20.2. The VLAN switch 2 have an IP subnet 10.10.10.0/24 and 10.10.11.0/24. I can ping to the management interface a PC on each VLAN without problem. As soon as I create a dynamic interface that is mapped to an IP to the VLAN 300 or 400, pings stop, unless I tag dynamic interfaces with 500 VLAN! I suspect it has to do with the VLAN native on the trunk but can't figure out how to get the dynamic interfaces for work.

  You want to keep vlan 500. If you then leave without tag your management will be the vlan 1 is not recommended. When you configure the switch (trunk) port to vlan native 500, that means that andy untagged frames will be put on the vlan 500. The interfaces that you create must be referenced...

  Configure the interface of management to '0' first of all, then set up the trunk with vlan native 500. then go back and set up the PA - manager without label '0 '.

• JOINT-2 basic configuration

  Hello

  I have some experience with sensors but this is my first time setting up a C6500 with JOINT-2, and I have a few questions of design. The first question is this: can I mix the VACL and large-scale use to capture traffic in the same configuration?

  Customer actually uses VACL to capture traffic of some machines, but he wants now to monitor all traffic from and external partner via a VPN concentrator, so I guess in this case I should use SPAN to monitor VPN port: I'm wrong?

  The config that the customer is more or less the following:

  detection of intrusion data 1-port module 1 module 1-port data 1 intrusion detection capture captures allowed - vlan 1 intrusion detection module 1 data port 2 capture allowed - vlan 1

  Plan ID to access VLAN 10

  corresponds to the ip address in

  direct capture of action

  Plan ID to access VLAN 20

  corresponds to the ip address to

  action forward

  VLAN ID vlan-list filter 1

  extended IP access list

  IP enable any host 192.168.1.1

  allow a host ip 192.168.1.1

  ...

  extended IP access list

  allow an ip

  If I want to use SCOPE, which is the limitation of the number of source ports I can put in the order to "monitor the session?"

  Should I send this "span" traffic detection interface 8 (data-port 2) or I can always send to the data port 1 (detection interface 7)?

  Why there are two sensing interfaces?

  Thanks in advance...

  Ruben

  First thing to understand is that the customer should not configure data 1 and data-port port 2 to see the same traffic.

  The sensor will get duplicate packets and minimize the overall performance of the detector (spending cpu just to throw duplicates) and at worst could cause false positive and negative or even false.

  So the first thing to do is to remove the capture set up configuration data-port 2, so only 1 data port is the packet capture.

  Now that the data port 2 is released until you can configure data ports 2 for something else.

  So if you want to use the span then Yes you can now configure data-port 2 as a destination span port

  Can mix you VACL and Span configurations?

  Yes, but not on the same data port. A data port can be a vacl capture port and the second data port a destination span port.

  However, you want to try to avoid as much as possible of the duplicate packets. So you will want to try and set it up so that traffic will be normally visible on the destination span port will not also view the vacl capture port (means generally change the VACL to not only capture the traffic).

  If you use Span to monitor VPN port?

  Duration is usually the best way to ensure you get all the packages in and out of a specific port. You will need to make sure that you use a port range (instead of a span of vlan) and make sure cover you the tx and rx traffic so that you get both in and out of traffic.

  Also make sure that the traffic that you are covering the traffic not encrypted and non encrypted traffic (which would be ignored by the sensor).

  What is the limitation on the number of source ports?

  I don't know, and I think he can differ depending on your version of IOS and the type of controller. So you must read the configuration for your cat guide 6K determine the limits of your specific switch.

  Should send you traffic to "merged" to 2 ports data or data port 1?

  A data port may not be as well a VACL Capture pore and a destination Span port. So if data-port 1 is configured for the VACL Capture then it cannot be a Span destination port. Configure a port as a VACL Capture port and the port other than the destination Span port.

  Why are there 2 remote sensing interfaces?

  To do similar things to what you ask. So, you can use 2 different surveillance techniques that would not be on a single port. Or to be able to make promiscuity on a port monitoring, while inline vlan pair monitoring IDE oucederomsurlesecondport. Or use 2 ports set inline interface pair followed.

• basic configuration question IPSec GRE

  

  the Sub test config has been entered at R1 (router left mostly). R4 has a similar to the inverse IP address config. R1 is able to ping R4 loopback at the present time.

  crypto ISAKMP policy 10
  BA aes
  preshared authentication
  Group 2
  life 120
  address of cisco crypto isakmp 203.115.34.4 keys
  !
  !
  Crypto ipsec transform-set MY_TRANSFORM ah-sha-hmac esp - aes
  !
  MY_MAP 10 ipsec-isakmp crypto map
  defined by peer 203.115.34.4
  game of transformation-MY_TRANSFORM
  match address 100
  !
  !
  !
  !
  interface Loopback0
  192.168.10.1 IP address 255.255.255.255
  !
  interface Tunnel0
  IP 192.168.14.1 255.255.255.0
  source of tunnel Serial1/2
  tunnel destination 203.115.34.4
  card crypto MY_MAP

  !

  !
  interface Serial1/2
  IP 203.115.12.1 255.255.255.0
  series 0 restart delay
  !
  !
  Router eigrp 100
  network 192.168.0.0 0.0.255.255
  Auto-resume
  !
  router ospf 100
  router ID 1.1.1.1
  Log-adjacency-changes
  network 203.115.0.0 0.0.255.255 area 0
  !

  !

  access-list 100 permit ip 192.168.0.0 0.0.255.255 192.168.0.0 0.0.255.255 connect

  !

  !

  I see cisco samples configurations include an access list entry as follows...

  access-list 100 permit gre 203.115.12.1 host 203.115.34.4

  I understand the purpose of the ACL above regarding the test configuration that I posted here.

  Let me explain.

  LAN - router - WAN - router - LAN

  Communication between the two LANs can be on a GRE tunnel to an IPsec tunnel or IPsec/GRE tunnel.

  If you simply want to communicate between them unicast IP traffic, IPsec is recommended because it will encrypt the traffic.

  If you need non-unicast or non - IP traffic through, then you can create a GRE tunnel.

  If you want IPsec encryption for the GRE tunnel and then configure IPsec/GRE.

  The ACL you mention will not work because the GRE traffic is only between tunnel endpoints.

  The traffic that flows between local networks is the IP (not the GRE traffic) traffic where a permit GRE ACL will not work.

  It will be useful.

  Federico.

• Basic configuration of NAC appliance

  I have a small project to authenticate users about 100 to access the network. We plan to use the Cisco NAC appliance. Just to clarify (I saw some post but I'm not sure of the correct answer) do I need 2 separate devices, one as a server and the other as a controller; or I just need a do two tasks?

  Thank you

  -Arturo

  Hi Arturo,.

  You need two devices to operate. A Manager and a server.

  There is a great Cisco Press book on the ANC by James Heary device that will give you a lot of details and information on the configuration of the devices.

  I hope this helps.

  Paul

• Basic configuration problem - please help!

  Hello

  I'll put up my first PIX firewall in a network of trial right now, and it is supposed to go into production in the next few days.

  I am trying to open some ports for a server inside, doing everything 'by the book' (cisco e-learning, to be exact), but I had no success with that. Basically, I'm trying to map an inside Server (192.168.254.199) to (xxx.115.215.1) external IP address that is assigned to the external interface. The type of traffic that must be passed inside the server is http and remote desktop. (Other users are PATed to xxx.115.215.2) So I tried to use the static/conduit pairs, according to e-learning stuff...

  public static xxx.115.215.1 (Interior, exterior) 192.168.254.199

  conduct permitted tcp xxx.115.215.1 eq www host everything

  driving permit host xxx.115.215.1 eq tcp 3389 everything

  After I type this, I can't access the internet from the server, or ping to the outside... and of course can not access office remote/web server from outside, which is the main goal.

  Here is the config:

  6.3 (5) PIX version

  interface ethernet0 car

  interface ethernet1 100full

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  activate the password xxx

  passwd xxx

  hostname pix

  fixup protocol dns-length maximum 512

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol tftp 69

  names of

  pager lines 24

  Outside 1500 MTU

  Within 1500 MTU

  IP address outside xxx.115.215.1 255.255.255.0

  IP address inside 192.168.254.1 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  history of PDM activate

  ARP timeout 14400

  Global 1 xxx.115.215.2 (outside)

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  allow icmp a conduit

  Route outside 0.0.0.0 0.0.0.0 xxx.115.215.125 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  AAA-server GANYMEDE + 3 max-failed-attempts

  AAA-server GANYMEDE + deadtime 10

  RADIUS Protocol RADIUS AAA server

  AAA-server RADIUS 3 max-failed-attempts

  AAA-RADIUS deadtime 10 Server

  AAA-server local LOCAL Protocol

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd address 192.168.254.100 - 192.168.254.150 inside

  dhcpd dns 192.168.254.199 199.185.225.10

  dhcpd wins 192.168.254.199

  dhcpd lease 28800

  dhcpd ping_timeout 750

  dhcpd field test.local

  dhcpd allow inside

  Terminal width 80

  Cryptochecksum:xxx

  : end

  PIX #.

  I am sure that the problem is something simple, as I'm just a newbie...

  Your help will be GREATLY apprechiated!

  Thanks in advance

  good news... I'm glad it works now!

  Please solve the case, while it appears on the list as "checked"... See you soon,.

• 501 - pix basic configuration help

  People:

  Just acquired a 501. I'm really new to cisco pix and have no idea how to set it up.

  NAT seems to work (I connect via a client workstation on the 'inside' interface) using the pdm. However, I can't get the 'external' interface to work.

  I must be missing something:

  In the properties of the system, both inside and outside are turned on. I assigned (ethernet0) outside an IP address and a subnet mask 255.255.254.0 provided - it is a multinet). However there is no field to assign the router or dns.

  After a lot of tinkering, I can't work natted stations to talk to the outside world.

  Any advice?

  Bobby

  The easiest way to get this working is by using the Setup Wizard. Launch PDM and goto menu "Assistants"->"Installation Wizard".

  I think that the reason why you couldn't get working of the external interface is that you don't have the program to setup the default gateway and dns properly. By going through the wizard, you will find a place for complete information.

  Jack

• vulnerability, right tools of analysis for DB beyond basic configurations. »

  Someone is using external tools for analysis of vulnerability DB as well as any recommendation?

  I'm looking for external suppliers and ANALYSIS tool.  I don't mean to Oracle security (links you posted). Thank you.

• Cannot store basic Camileo S10 and P30 configurations

  Hello, first post for me. I got a Camileo S10 and changed with a Camileo P30, and on the two camera, I can't record some basic configurations. I have to put every time that use of the camera. By example, if I activate the stabilizer in 720 p, at a filming of a video, as someone close to the camera, 5 min later I have to ashoot another video, I always have to go into the settings and re-setup stabilizing, because this setting are not stored, while the 720 p stay stored configuration. Same thing for the photo shoot, where of the light conditions and so on must be set each time. It's very annoying, and I can't ask my son to not to move to get a picture, if everytime I open the camera I have to redo the configurations... I'm doing something wrong here? Is there a way to save configurations, as in most normal and camcorder camera?

  Thank you very much

  Lillo

  Hello

  I contacted my friend because he has the same cam. I ve asked him to check this.

  He told me that this stabilization can be used in HD recording and it can be used by the registration with a lower resolution only.
  Another thing:
  Did you put the battery inside and full load?
  What's with the time and data? Is always shown the right one?

• Basic IDS module configuration

  I have some basic configuration questions to ask questions about a module IDS in a router 3725.

  (NM-CIDS)

  1. the interface of the module must be configured as a normal interface like any other fast ethernet interface. If so, how do I enter the web configuration of the sensor? I can t give the sensor a IP on the same subnet as another interface, so I have to create a VLAN on my switch and install a new network adapter on a computer just to access the sensor?

  2. I want to use the sensor to monitor my internet connection. My internet come in the router where the sensor is, but not on the sensor interface. So I added the line: ID-service-module of surveillance on the internet interface. I m now, assuming that the sensor monitors this interface, but it can block t any IP address on it can it? Can I use the interface of s sensor as my internet connection? It will route traffic to the router as any other interface?

  3. If the probe to be on it's own subnet, I can get t the licensing of auto update, since this new subnet as no access to the internet.

  I must admit, I was a bit confused as the basis of this module menu, documentation is clear on how to implement and I did, I even upgraded the sensor to version 5.0, but the basic idea behind it and basic configuration is not clear, he only tells me the reasons for the separate subnet.

  Can someone guide me in the right direction?

  My goal is to install the sensor for connection to the internet society that is currently connected to a fast ethernet on the router card and send events to a syslog server that I'm being followed.

  Thank you

  Bernard Magny

  The NM-CIDS has 2 interfaces, you have to deal with.

  The internal interface on the backplane of the router and an external interface that you can plug a wire to.

  In addition, it has an interface of the router on the backplane of the NM-CIDS router. This background basket of the router interface and the internal interface of the NM-CIDS may be considered to be wired together.

  To think of the NM-CIDS, the simplest method is to consider a PC that sits inside the router.

  It can easily be compared to a device IDS.

  The internal of the NM-CIDS is the interface to sniff. NM - CIDS does not have this internal interface to an IP address. It is used only for the reception of packets from the router for the follow-up and sending TCP resets.

  The router has its bottom of basket interface that corresponds to this interface to internal sniffing NM-CIDS. You must obtain an IP address from the router interface NM - CIDS, but no traffic will never really "routed" to it. If most of the users will be either assign a non-routable address or a loopback address, or do share an address with an other interfaces of the router.

  This address is NOT used to configure or control the NM-CIDS using a nonroutable loopback address is often the best thing to do.

  This router interface and NM-CIDS background basket can best be compared to a port span on a switch controlled by a device.

  The "ids" command applied to a physical interface of the router is like "covering" this interface.

  The 'split' traffic is copied to the destination port "span", which is the bottom interface of router for the NM-CIDS basket. Once these packages are copied into the bottom of the router on the NM-CIDS slot basket, then the internal port of the NM-CIDS will sniff and analyze packets.

  If the real package comes in an interface of the router and get "routed" to another interface on the other. If there is an 'ID' command on one of these 2 interfaces then these packages will be also copied ("split") in the NM-CIDS for surveillance. So the NM-CIDS amd the corresponding interface from the router backplane are not in the path of the package and are only a copy of the package.

  NOTE: Technically, the package doesn't is not 'stride' because 'covering' is only taken in charge by a switch, but the majority of users to understand the concept. And the concept is what I'm trying to convey.

  Now the external port of the NM-CIDS is the port command and control. This is where you have assigned an IP address. Understand that this is NOT a router interface. He will not participate in routing protocols. All packets destined for this port will stop at the NM-CIDS.

  This port is better compared with the command and control of a device IDS sensor port. The port address is used only to talk directly to the IDS sensor.

  So what address to to affect?

  The best method is to give an address on your internal network more secure and phsyically in this network, all taking as you would for any other PC (or the port command and control of a device ID).

  Since this interface the NM-CIDS is not a router interface and does NOT participate in routing, then it's OK for the router itself to have an interface on the same subnet and be connected to the same switch and the same vlan as the external command and control NM-CIDS interface. In fact, it's exactly what most users do. In addition, IP from the router on that subnet is usually the default gateway configured on the NM-CIDS for its command and control interface. If you think that the NM - CID is a PC, so it makes sense.

  Some clients may have a special network for the management of their security devices (usually only large companies). In these scenarios, NM - CIDS command and control can be placed on a network that is not routable even by the router, in which he was placed. It's pretty rare, but it is possible to do.

• Do I need a fieldbus Configurator software?

  Beginning of I m to learn more about the Fieldbus Foundation and I'd like to develop a simple Visual Basic application to automate the calibration of analog input of fieldbus instrument, for example, set with a standard 1 Volt in the analog input of fieldbus instrument and read the value displayed by the instrument using the API OR-FBUS and my Visual Basic program.

  Do I have to buy a NOR-Configurator of this network of simple fieldbus H1 with a single field device and and NI USB-8486 interface?

  It s is not clear to me if I need a Configurator, for example, with a new instrument of Fieldbus needing to adjust some parameters with NOR-Configurator before using the API OR-FBUS Communications Manager in my Visual Basic program.

  I've seen a few old messages that you want to sell a Configurator API. Do you still sell this API?

  My intention, if possible, is to build an application that does not require installation of a fieldbus Configurator software.

  NOR-FBUS software consists of two components, Communications Manager (CM) and Configurator.

  CM provides a basic API for access to the network of FF.  You can create your own application of Fieldbus Foundation with the API.

  Configurator is a graphical tool to long for the full configuration. You don't need to build the application.

  CM (VB, VC, c#, VB.Net) APIs supports the following Basic configuration tasks.

  -The list interface, device, function blocks

  -Block/playback device tag

  -Read and write parameters by name or index

  -Read the alert data and trend

  I think that the APIs are not enough for your simple VB application.

  You may need to use the Configurator if you need the following features.

  -Get and set the device address

  -Put the tag block/device

  -Configurator and download Application Block function annex

• WRT1900AC cannot configure VPN

  I CURRENTLY HAVE 2 WIRELESS ROUTERS AN ASUS RT-N56U WHICH WAS EASY to set UP WITH ExpressVPN. COMING TO EXPAND MY NETWORK & IMPROVE USING A LINKSIS WRT1900AC. UNABLE TO SET TO THE TOP OF THE SAME. BOTH ROUTERS ARE HARD CABLES TO THE ISP ROUTER & WILL BE POSITIONED AT DIFFERENT AREAS OF THE HOUSE FOR COVER. I HAVE THE ExpressVPN PAST & DETAILS USER password, LIST OF GLOBAL SERVER ADDRESSES & THEIR ADDRESSES IP CONCERNED.

  CAN SOMEONE HELP ME IN THE BASIC CONFIGURATION. I AM NOT AN IT WIZZ BUT YOU CAN FOLLOW THE INSTRUCTIONS ESPECIALLY WITH SCREENSHOTS SUPPORTED. HELP IS GREATLY APPRECIATED.

  OK gents,

  Answers very well. It gives me a lot to think so thank you very much.

  Temporarily, I currently have 2 routers connected switch wired to asus to linksys with the linksys being connected on the local network of the asus through the cable network. The asus is configured as L2TP that allows the details of user, password & VPN server. Use them in this way gives me the IP addresses associated with the address of the server used. This IP address is provided if connected to a router. Probably not the fastest or the best way but will suffice until I have work on your tech talk.  I have an ASUS RT - 68U (which has the VPN Client) available to replace the Asus RT - 56U to come. I can use the 56U on the edge of the property similar to the linksys. Trial & error prototyping will I hope make me it in the absence of knowledge or understanding.

  Can someone advise on potential pitfalls with the current configuration or plans for the future?

  Thanks again.