Do I need a fieldbus Configurator software?

Similar Questions

• A PC can operate effectively WITHOUT the need for anti-virus software?

  Come to think if the first PC I've had and the worms Blaster threatened everyone...

  I do not just shoot when to install my anti-virus software, I need to close my Windows Firewall... 2 + 2 = and Yes, when I did I got the virus of shit...

  If only I had not installed the Norton... do you not think that any PC can operate without the need for anti-virus software knowing that you must close

  the Windows firewall and use theres rather...?

  I wonder!

  Hello

  It would be unwise to try to start without antivirus/antispyware are has just too many real threats and
  methods for malware to attack the system. If you attempt to do if of course you have redundant and
  current backups.

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leave the file system, Web,.
  Operational network (Script and behavior are also recommended in Ver 6 +).

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 6.x and 4.8 x

  Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.
  http://www.Malwarebytes.org/products/malwarebytes_free

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Do I need to use the software provided with the wireless hardware to go wireless? __

  I have a router Linksys Wireless (wrt160n) that I am not using. I whant to buy a (Linksys WUSB600N) for my office. I want to know if I need to use the software supplied with the hardware, or can I just use Microsoft Wizard to configure my network? Operating system is Vista Premium.

  Thank you Jeremy will do.

• Windows needs to install driver software for your DCC

  I installed the double mod. Windows Vista Ultimate & windows 8.1. When I started to pass on my laptop running windows Vista, it takes 5 minutes to open a session and message displays Windows needs to install driver software for your model of control abstract CDC (ACM)

  I don't understand how I can solve this problem.

  Thank you

  Try this link.

  https://social.technet.Microsoft.com/search/en-us?query=dual%20mode%20driver%20SOFTWARE%20CDC%20abstract%20control%20model%20$ $ACM & ac = 5 #refinementChanges = & pageNumber = 1 & showMore = false

  In addition, with some PCs, you can select boot options, with dell, the F12 key to start the pc. Also, try this link for dual

  Starting the OS.

  https://social.technet.Microsoft.com/search/en-us?query=dual%20mode%20pc%20startup&AC=6#refinementChanges=60&PageNumber=1&showMore=false

• I don't see the icon of mail in the Panel, I need this to configure outlook express help pls

  I don't see the icon of mail in the Panel, I need this to configure outlook express help pls

  Hello

  1. are you referring to Windows mail or Outlook Express?

  2 have you made changes on the computer before this problem?

  3 What is a 32-bit or a 64-bit operating system?

  Try the next method and check if it helps.

  Method 1:

  Step 1:

  Change the setting from Control Panel and check if that helps.

  a. Click Start, then select Control Panel

  b. click on additional Options

  c. Select view 32-bit Control Panel items and click on Mail and check if that helps.

  Step 2:

  Change the display panel and check if it helps

  a. go to control panel,
  b. click view classic icons

  See also:

  http://Windows.Microsoft.com/en-us/Windows-Vista/where-is-Outlook-Express

  http://Windows.Microsoft.com/en-us/Windows-Vista/import-messages-into-Windows-mail-from-Outlook-Express

• Error "the message could not be sent. "The setting for your outgoing e-mail [SMTP] Server may need to be configured" in Windows Live Mail

  I use Windows Live Mail and it seems to me that they receive an email but I get the following messages and cannot send emails

  The message could not be sent. The setting for your outgoing e-mail [SMTP] Server may need to be configured. To find the server settings for * address email is removed from the privacy *', please contact your e-mail service provider.

  Object "Marriot coverage."
  Server error: 550
  Server response: 550 must be authenticated.
  Server: 'auth.smtp.1and1.co.uk '.
  Windows Live Mail error ID: 0x800CCC79
  Protocol: SMTP
  Port: 587
  Secure (SSL): Yes

  Can someone help me please

  JO

  Original title: Email problems

  Check with your e-mail provider on how the various SMTP (especially the port) settings must be set to confirm that everything is correct. But, take a look at this setting and try to change it if necessary to see if it helps.

  WLMail open

  Right-click on the name of the email account

  Click 'properties '.

  Click the [servers].

  "my server requires authentication" is checked?

  If it is not try to delay it and and see what happens then.

  Note that you may need to click the [Settings] button to enter the necessary info he needed.

• I need to install the software on a second notebook

  I have a creative cloud ID and I need to install the software on a second notebook, but the options that are available are: install the trial version or buy the products.
  But I don't want to buy, because it is possible to install on two computers with a unique ID.
  I use Windows 10.
  I have already installed the trial version

  Maria, let me know if you are unable to support.

  I can help you get in touch with them.

• I'm on a mac. I have 2 different versions of mac operating systems running on 2 different hard disks, because of needs of customers with software compatibility. If I update a cc adobe programs in a single operating system hard drive system, it will affect

  I'm on a mac. I have 2 different versions of mac operating systems running on 2 different hard disks, because of needs of customers with software compatibility. If I update a cc adobe programs in a single operating system hard drive system, it will affect older versions of programs cc in the other system of operating system hard drive?

  If, as you say, they are completely separate installations on separate hard disks, each with there own version of PS for example, there should be no way that they could interfere with each other! I assume you are using a form any of Boot Manager to load a specific version of Mac OS x?

  I did something similar at the start in a similar situation with client compatibility and not had a problem with either interfere with others!

  However, you share the programs somehow between different OS, so that would be another matter.

• Windows needs to install driver software for your ethernet controller

  Hello

  IM using HP G7000 notebook OS vista and when I turned it on: windows needs to install driver software for your ethernet controller. This driver will install?

  Download and install driver Atheros ofhis

• I need to reinstall the software on my laptop

  I need to reinstall the software on my laptop and will therefore have to reinstall Lightroom, what happens to my photos and I do back ups?

  Hi paulob,

  I suggest to perform a backup of the images and the catalog in Lightroom.

  And then please reinstall Lightroom application on your computer, ensure that the backup catalog keeps your editing.

  Please let us know if it helps.

  Kind regards

  Tanuj Sandal

• My hard drive crashed and I need to reload my software CS6.  Where can I find a download link?

  My hard drive crashed on my desk.  I need to reload my software CS6.  Where can I find a download link?  I use it to download at work... I work at FedEx Office.

  Thank you

  Audrey

  You can download the trial from the Adobe https://www.adobe.com/products/cs6.html site and activate it with your serial number.

  Alternatively you can download it directly (without any Download Manager) of http://prodesigntools.com/adobe-cs6-direct-download-links.html - make sure you follow the instructions very important before proceeding with the download.

• What is needed to download the software using Adobe Download Assistant?

  What is needed to download the software using Adobe Download Assistant?

  Adobe Download Assistant mainly use Adobe AIR.  This allows him to run as its own program instead of requiring the use of a web browser.  Adobe AIR is cross-platform and is currently compatible with Mac OS, Windows XP, Windows Vista and Windows 7.

  Click here for more information on Adobe AIR.

• How can I configure an IMAGE MEMORY FULL I need dysfunction anti virus software.

  I tried AVG, MS Essentials, AVAST antivirus, they make the permenantly active HD and the PC (XP Pro 2002, 2.5 GB of RAM, 2 GHz, AMD SEMPRON, 70 GB of FREE hard disk) unusable and ends up the accident, shows BEGINNING MEMORY DUMP but does not have one.
  I am contacting AVAST support, who need a COMPLETE MEMORY IMAGE I set option of the SYSTEM FAILURE of MINIDUMP which have not spared either, NOW I can't reset to COMPLETE DISCHARGE of MEMORY because the option is 'NOT' gone!
  CAN ANYONE HELP? How can I reset to DISCHARGE MEMORY FULL? How to make a DUMP of MEMORY to record? I have all the correct configuration as described virtual on C: set to auto config of good size.
  Help!

  What is your system brand and model?

  Do you have any type of RAID configuration with your hard drives?

  Do you experience a system crash and blue screen of death (BSOD)?

  If you are experiencing a BSOD, you think people AVAST is going to help you with this?

  Don't you think that your system has some malicious software on it?

  If you think you have an infection and can always go on the Internet, I scan with other software first, then see if you still have a problem with the configuration of the memory dump and if you do, then fix it.

  Of course things should work, but it makes no sense to try to fix something on a system where malware can hide.  Malware will sometimes afflict the debugging tools and options on your system that you can use to find and remove it.

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.
  Just to review, here's what your settings should look like for a partial memory (usually suffixient for troubleshooting the BSOD) image:
  Right click my computer, properties, advanced, startup and recovery settings.

  In the system failure section:

  Put a check mark in the box "write an event to the system log.

  Put a check mark in the box "send an administrative alert.

  Uncheck 'automatically restart '.

  In the Write debugging information section select:

  Partial dump (64 KB)

  Set the directory small dumpster:

  %SystemRoot%\Minidump

  Click OK, OK.

  Restart your computer.
  If you see a BSOD and want to see if you can fix, follow these steps:
  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Download BlueScreenView here:

  http://www.NirSoft.NET/utils/blue_screen_view.html

  Unzip it and run it (BSV installs nothing) and let him complete the digitization of all your crash dump files.

  If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).

  Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files.  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).

  Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt
  .  Open BSOD.txt with a text editor, copy the text and paste it in your next reply.
  Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:
  ==================================================
  Dump file: Mini062110 - 01.dmp
  Crash time: 21/06/2010-11:51:31
  Bug Check String: MANUALLY_INITIATED_CRASH
  Bug check code: 0x000000e2
  Parameter 1: 0x00000000
  Parameter 2: 0x00000000
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: i8042prt.sys
  Caused by the address: i8042prt.sys + 27fb
  Description of the file: i8042 Port driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 5.1.2600.5512 (xpsp.080413 - 2108)
  Processor: 32-bit
  Computer name:
  Full path: C:\WINDOWS\minidump\Mini062110-01.dmp
  ==================================================
  Send information from 5 last memory dumps.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Need help with the disks 'unreadable' configuring software raid after the death of the startup disk and system restored.

  I'm looking for some advice on how to restore a windows xp installation software raid 5 that was running on my XP system. I had a problem when the startup disk has failed, but I was able to backup the system before it can. I replaced the drive and restored the system and everything came, but I was not smart to do this and accidently left the readers connected when restoring raid. I don't know if windows has done something when I tried to install XP on the new drive, or maybe something else has happened when I restored the system from the backup, but my raid drives can not be used. There was a moment in the restaurant business I saw a message on the MBR, but I thought that was just for the drive being restored. I didn't have a single player who held any information on the other disks in the system, but I'm not 100% sure on that.

  When the system boots the windows logo screen takes 10-20 minutes before you get on the desktop. Windows Disk Manager takes 20-30 minutes to fill the list of drives and status on the disks three raid is 'dynamic' and 'unreadable' is not reassuring. I suspect it's a problem MBR or partition table that must be corrected before trying to reactive the raid, but this is just speculation.

  The raid drives are on a promise ide/scsi disk and make it appear to start correctly with names and sizes. After that I get nothing. I do not have another scsi controller (or), but I thought I'd try active @ partition recovery to see if she can find information on the disks.

  I hope someone has some experience with recovery like this, because this is a first for me. I thought I was pretty sure running a raid-5, but wouldn't you know, the tech gods have found a way to crush my plans...

  Thanks in advance for any help!

  Hello

  Thank you for visiting the Microsoft answers community site. Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet Windows XP IT Pro Forums.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Need help to configure the VLAN on a powerconnect 5448

  Hello world

  I am currently working on 2 switches PowerConnect 5448 but I'm completely lost in configuring VLAN.

  My bow:

  

  My needs are:

  -J' have 2 different networks that need to be isolated in different VLANS

  -I want to port 11-14 to use for network backup, all others must be used for the production network.

  -This 2 networks must pass through the port 48 (fiber)

  How can I configure this kind of network on the powerconnect interface (or via telnet)?

  My understood are the following, I have to create 2 different VLAN tag all ports, switch to safe mode all ports of the entitlement each port to the VLAN voted. Am I wrong?

  How the fiber port?

  Thanks in advance for your help on this matter.

  Since your 2 VLAN need not communicate with each other, you should be able to get this working.

  The easiest way to do this would be to have your production on VLAN 1 and VLAN 2 second network.

  Assign an IP address to the switch with the command IP #.

  Assign a default gateway with the # ip default-gateway command.

  Create a VLAN 2:

  Database console (config) # vlan

  Console (config - vlan) # vlan 2

  Set 11-14 ports to access the mode for VLAN 2

  Console # switchport mode access

  Console # switchport access vlan 2

  Set 48 on trunk or general mode ports.

  Console # switchport mode Trunk

  console # permit trunk switchport vlan add 2

  You should get pretty close to a work environment. You may encounter some problem with VLAN 2 contacting 192.168.1.0, maybe just need to put it up and test.

  Here are a few links to software packages and manuals that can help.

  Firmware.

  http://Dell.to/1tz8tW0

  Manuals.

  http://Dell.to/1yqV4DJ

  Keep us on how will your configuration.