Pixelated when previewing, but not after

Similar Questions

• Verification of link - worked in the preview, but not after sending to the browser

  I had to reorganize my files for this project due to the demand of the customer. I moved all the files inside DW. I did a check of all the Local Site links. Most of the links have been updated. I need to fix the rest.

  I downloaded on my server. When I test the links in the navigation bar, they do not work. I don't know what the problem is.  Thanks to all those who will look at this for me.

  http://www.webassistantsllc.com/clients/QoP

  Lynne

  The structure of the files should be the same locally because they are on the remote control.  If you work in DW and the files are not in a folder named QOP but you start linking to pages in your local folder, DW will keep track of them.  However, once you move the file to the remote control and all of a sudden you put files in the QOP folder, then all the links will be incorrect.y

  When you move files, always do it through the Control Panel files in DW, and then make sure that the same folder structure exists on the remote control.

• Why an object displays in the preview, but not when published

  I added a text box with a hyperlink to another page and it shows fine in preview, but not when published - why?

  Thank you, David. I just went ahead and replaced the problem with a menu object. Problem solved.

• Embedded YouTube videos work locally, but not after the FTP publishing. Works locally and on the web in all other browsers. Using FF 17.0.1 and Adobe Flash 11.5.502

  Found a Tube-video, which I embarked on one of the pages of my site. Using FF 17.0.1 and Adobe Flash 11.5.502, YouTube-videos work locally, but not after the FTP publishing.

  I work reasonable locally and on the web in all other browsers.

  Stupid FF?

  The HTML code is as follows:

  <table WIDTH="770" CELLPADDING="0" CELLSPACING="0">
    <tr VALIGN="TOP">
      <td VALIGN="top" ALIGN="left" width="463">
  <object WIDTH="340" HEIGHT="193">
        <param name="movie" value="http://www.youtube.com/v/N6GvuO_9tLY?fs=1?amp;hl=de_DE">
        <param name="allowFullScreen" value="true">
        <param name="allowscriptaccess" value="always"><embed SRC="http://www.youtube.com/v/N6GvuO_9tLY?fs=1?amp;hl=de_DE" TYPE="application/x-shockwave-flash" WIDTH="340" HEIGHT="193">
      </object>
  </td>
      <td VALIGN="top" ALIGN="left" width="403"></td>
      </tr>
  </table>

  I've experimented on the use of < iframe > instead of < object >. No change. Cache cleared on each attempt.

  Any thoughts?

  If it works in Firefox Safe mode and then disable all extensions (Tools > Modules > Extensions) and then try to find out who is causing by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  Alternatively, you can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• my animated biotech substance of edge is visible in the browser preview but not online

  This is the code on http://www.gelovenisgelukkigleven.nl/20%20juli%202013.html

  <! DOCTYPE html >

  < html >

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 ">"

  < meta http-equiv = "X-UA-Compatible" content = "IE = Edge" / >

  < title > Martian van Velde < /title >

  <! - execution of adobe Edge - >

  < script type = "text/javascript" charset = "utf-8"src="20%20juli%202013_edgePreload.js" > < / script > "."

  < style >

  .edgeLoad-EDGE-1138148 {visibility: hidden ;}}

  < / style >

  <! - end of Runtime adobe Edge - >

  < / head >

  < body style = "margin: 0;" padding: 0; ">

  < div id = 'Stage' class = "EDGE-1138148" >

  < / div >

  < / body >

  < / html >

  What I ' m hurt?

  This isn't the reason. In a lot of links goog animation even does not work, as http://d368525-647.pem.kpn.net/begrafenis/begrafenis.html the same here: animation works fine in preview, but not online

• GIF images appear in the preview, but not on my site

  I had problems with lately - image resolution never happened before - and solve only using GIF images. Everything was wonderful in the preview, but when I downloaded on my site - images do not appear:

  

  The first of the above pictures is a PNG image.

  Display the preview:

  

  Live view from another page:

  

  Overview:

  

  The foregoing is a slide show - which works in preview mode, but not on the live site – which is not only to make the gif images are not displayed, but the slide show does not (the text is part of the slideshow).

  Other info - I download html via filezilla, to publish my site.

  Any help appreciated,

  Thank you

  The answer is that this is my problem and not question of Adobe. GIF appeared in the catalyst and go daddy publish.

• Effect of cropping mask working in preview, but not made

  Machine: iMac

  Version: First Pro CC 2014 - update this morning (1.27.15)

  Editing an interview where the camera operator appears in a reflection.  To resolve this problem, I caught a shot earlier unless the person of the camera at this place, looping images, placed on a layer below the sequence main and cropped using a mask to leave the loop images see grace (hiding the cameraman).

  Sounds good in the preview, but when I made the images, the person is once again, as if the mask of harvest just went.  I can't fix this problem.

  Help, please!

  Thank you.

  Do not use the mask of the cropping effect. If you want to cut a hole using opacity mask and mix.

• Flash viewer works in preview, but not online

  Hello

  I followed an online demo on how to get an image on my Web page slide show using flash. He has been using insert media image viewer. This worked well, looked great in the preview but when I put everything online I don't see it. Just an empty space were it should be. This is the site where it is

  http://www.idoityourself.com.au/ If tried to move the image to different areas where he did not like to be in a folder in a folder etc. but still does not work. Any ideas?

  Thank you

  http://www.idoityourself.com.au/scripts/ac_runactivecontent.js File not found.

  You have not downloaded the Scripts folder on your server that DW is automatically generated for you when you inserted the Flash.

• Why ask Windows xp password when sleep, but not at startup

  Windows xp 2002 teacher sometimes ask password, that is to say, when he's sleeping. but not at the start. I want to ask him all the time?

  Go to this article:

  "How to turn on automatic logon in Windows XP"
    <>http://support.Microsoft.com/kb/315231 >

  It tells you how to enable this feature.  To disable it, go to the section "Let me difficulty it Myself ' and follow method 2 except insert a check in the box"user must enter a username and password... ". "instead of delete.

  HTH,
  JW

• Can connect to internet when wired, but not wireless

  Just restarted my computer laptop and now unable to connect to the internet.via my wireless router. Am connected to the router, but not the router to the internet. Can connect to the internet by a cable in the router to my laptop. The computer identifies the network correctly when it is wired, but shows as not identified during the use of the wireless router. Already fed the moden and router down twice, without change. other phones that I use are able to access the intwrnet via the wireless router, so I think it has to do with the system restart I just did on this laptop. Any ideas would be helpful

  Hello

  You did it all changes on the computer (which is originally this issue) before this problem?

  Read the following article that may help you.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• XPS 8300: Install new hard drive 3 TB BSOD results after imaging but not after Win7 clean

  I have a XPS 8300 and the original Seagate 2 TB hard drive is dead. Because being forced to install a new HARD drive, I opted for 3 TB and bought a WD because I had horrible luck with Seagate repeatedly.

  Anyway, I installed the new HARD drive and booted from the Windows 7 64 bit Pro installation disc and attached my external drive to backup and choose the backup image to the new disk. It completed without error, but when the computer restarts, I get a blue screen of death with the 7B stop code. I tried to put the HARD drive in a box and attached to another computer, and all my image files are there so I know that the computer was able to write the image to the new HARD disk. How to fix the BSOD errors? I set to update to the latest version of the BIOS (A06) but always the blue screen. I tried to install the latest Intel drivers also and which does not seem to do anything.

  Frustrated, I installed Windows 7 clean on this drive and I am writing this message from him. The drive appears in my computer as a 2 TB. Disk Management displays 100 MB System Reserved Partition, Partition C: of 2047 GB and 746 GB unallocated.

  Why a new installation does not seem to work (I know that I would have to format the 746 GB to use it and to give it a new drive letter) but the imagery that the disc breaks down. What Miss me?

  I've seen a lot of posts on using Intel drivers to solve similar problems. These drivers get breaths during the imaging process? Should they be installed before the imagery of the backup? (Thought that I did, but maybe I didn't do it right - their installation can be verified before the disk imaging?) Tried to call Dell and Windows support... am no where in a hurry.

  Hi LG1382,

  You cannot start Windows 7 on a 3 TB drive. You can use it for data, but not as the system drive. Windows 7 can only start TPG on systems with BIOS UEFI, which does not the 8300.

• Mercury pass working in the first, but not After Effects (CC 2015)

  Hello people. Did some research on Google, but not came with something useful.

  I use a TV regular ole plugged into the HDMI port on my graphics card to production and to see my work on a larger screen, thanks to pass mercury. 2014 CC gave me no problem. Make the same settings in CC 2015 and first works like a pro, but After Effects is a no-go. I tried to ensure that the window cross the edges of the screen, try it with or without first opened, with or without "disable in the background."

  Loss - of ideas? Of qualifying questions that can help to provide more information?

  System specs

  Mac OSX 10.10.4 (early 2009 MacPro)

  2 x Quad-core 2.26
  680 2 GB GTX

  20 GB of ram

  With the help of AE in the last update

  Hi DG;

  Have you tried measures to solve the issue that helped you? If so, mention the steps you tried this number shouldn't, t come on CC 2014 or 15 on 10.10.5 and below.

  Have you tried to calibrate the seconday monitor or rename the Adobe folder in the Documents and MAC hd library > Application Support > Adobe? or tried any other HDMI and redefinition of workspaces?

  Vinay

• Dreamweaver working in preview, but not online turnover

  I often use swap image for bearings. After making a few changes on my site to friends, I noticed that all the bearings has stopped working. I tried in all browsers, I tried to restore a file of time machine, I tried with a bunch of different images.

  So, I tried a very simple white page with a single image on it and the "Swap image" behavior applied. It displays both in preview and not online (Dreamweaver CS5.5)

  http://amypalma.com/test3.html

  Please help, I think I'm going crazy.

  Your file is corrupted.  All line breaks have been stripped clean to the application of your code.  Scripts cannot work this way.

  Try to use another like Filezilla FTP client to upload your pages.

  Also check the type of line break in your preferences.  See screenshot.

  

  Click OK.

  Access the commands > apply source format.

  Nancy O.

• Some policies appear in the PDF files after "Print" to PDF, but not after "save under" PDF

  FM9, Kozuka fonts and one of my custom symbols fonts show in a file PDF produced with "Print" and a PDF printer, but not when I do "save in" and select "Save as:" PDF. Kozuka characters out as boxes, and custom symbols are absent; Although if I highlight the place to be in the PDF, the font name shows. I use Acrobat 7 Pro.

  I tried to change the Asian fonts in the police combined with the "Pr6N" Kozuka provided with FM9 versions, but that did not work.

  I also tried to copy the fonts to "C:\Program Files\Adobe\FrameMaker9\fminit\fonts\adobe" and various other places, and of course, they are in the folder Fonts of Windows, nothing helps. My other custom symbols fonts work very well, and they are only in the Fonts to Windows folder.

  These fonts worked well in FM8. Any ideas?

  Thank you

  Tami

  Hello Tami,

  try saving the PDF file once again, but this time - in the dialog box options PDF - select the check box 'convert CMYK to RGB colours. Fonts now appear correctly? If so, it's just another bug of the famous engine FM CMYK. When you convert the colors to RGB, you get the same result as when printing to PDF.

  Bernd

• Sound works in preview, but not when I made the video output! :( [ADOBE AFTER EFFECTS CC 2015]

  Hey!

  I'm pretty new to Adobe after effects CC 2015. I have a video that is about a minute, everything works as it should when I preview the it. But when I visited, with the right settings, the sound will not be rendered.

  So basically I can hear all the sONFERENCES when I saw it, but when I make it I cannot here any sound at all. I tried to get the sound on Auto and on. But nothing works.

  

  And Yes, some of the mp4 files I use for audio as well, but will not play the file audio mp3 or another. Some would like to help! I've had this problem for a few days now!

  We have a solution for this in the update after effects CC 2015 (13.6):

  http://Adobe.LY/1MVxHgX

  Try it and let us know how it works for you.