Can connect to internet when wired, but not wireless
Just restarted my computer laptop and now unable to connect to the internet.via my wireless router. Am connected to the router, but not the router to the internet. Can connect to the internet by a cable in the router to my laptop. The computer identifies the network correctly when it is wired, but shows as not identified during the use of the wireless router. Already fed the moden and router down twice, without change. other phones that I use are able to access the intwrnet via the wireless router, so I think it has to do with the system restart I just did on this laptop. Any ideas would be helpful
Hello
You did it all changes on the computer (which is originally this issue) before this problem?
Read the following article that may help you.
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
Tags: Windows
Similar Questions
-
I can connect to the local network, but not to the internet
Why in an internet connection, I can connect to the Local network, but not to the Internet.
I have valid IP address and configuration is good.I recommend you read some threads here in the forum about similar issues.
If this problem occurs using the WiFi network, then check if you can use the connection to the local network.
Using the WiFi network, you must check if the common WLan parameters are favourable;
Check if the encryption key is right; turn off filtering by mac address, check the TCP/IP protocol settings if it has been set to automatic, disable the firewall settings, rest you WLan router, check if you connected to the right SSID.Good bye
-
Can connect to the office/Hotmail but not Live of Skype. .
Hello
I can connect my hotmail, and I can see my Skype contacts, but it says my password is wrong if I try to connect to live Skype.
Using the same account and passowrd, I can connect to Skype from office, but I don't see my contacts.
Any ideas? Thank you
http://heartbeat.Skype.com/2015/11/issues_with_skype_login_and_co.html
-
Help! I can connect to my neighbors WiFi but not my own!
I hope that someone can help you. I can connect to my neighbors WiFi without problem, but my own internet connection does not work correctly. If I reboot the modem/router I can connect for about 10 minutes, then he said: "no internet connection" & I get the yellow triangle with the '!' in it... If I open the network and sharing Center and 'Diagnostic' advise me my "Local network doesn't have a valid IP configuration". It does when I use a wired connection and a Wi - Fi connection. Yet if I connect to my neighbors WiFi I have no problem at all.
I don't know what to do!
Hi Katy,.Follow step 1 in this guide: http://www.selectrealsecurity.com/fix-internet-connectionIf you have any questions, just ask. Let me know if this helps you.Brian -
can connect you to game Center, but not games
I can connect to Game Center - under 'Me', it shows my AppleID and a few points - it shows that I have 15 games in the red and friends bubble under blue bubble, but when I click on the icons of the friends of the games I get 'No. Friends' and 'no. Games. "
I tried logging on Game Center, and logging back with the same and consistent results
Help!
I'm on a MacBookPro running OSX 10.11.6
I got the same problem and restart my device worked for me.
-
RV082 with QuickVPN can connect to the Windows Server but not on Ubuntu Server
We have a RV082 and are capable of using QuickVPN to connect and access our work LAN (192.168.0.0) except that we can not connect to a Linux Ubuntu Server on the local network. Can ping (and shared access) servers Novell, a Windows 2003 server and several printers but not the linux server.
192.168.0.1 Novell server can ping
192.168.0.2 Server Linux ping or you connect
192.168.0.3 Windows 2003 server can ping and connect
192.168.0.4 - 11 different printers that I can ping and install
I can ping and connect to the server using PPTP-Linux
Troubleshooting tips will be greatly appreciated
Good afternoon
Review of your question, it would seem at first glance that the Ubuntu Server may be blocking incoming VPN traffic. I'm not sure of what firewall program you have chosen to use with your server Ubuntu, but make sure the ports 500, 4500, 443 and 60443 are open to traffic entering this subnet. If you can detect all the errors showing blocked traffic trying to hit the server, which can be useful in allowing us to determine why this traffic does not go through.
Thank you
-Lindsey
-
I can't scroll through sites that I connect. something happened in Firefox Mozilla. He used to work when I am connected to a Web page, but not now. all I can do is to manipulate the page through links on the page. No sidebar to scroll or the other. It works fine in Explorer, so I know it's a problem with Firefox, also can scroll etc on pages like MSN, Yahoo, etc., but does not not using Firefox, when I connect to one Web site other than the one which is also a search engine, what happened? can you help me?
You get a pop-up window or dialog style without menu or the toolbar either? In this case:
38 of Firefox has a little problem with this combination of circumstances:
(1) turned off tabbed browsing
(2) viewing a page in a private window
(3) you click on a link encoded with target = "_blank", which launches the link in a new windowThe new window opens without menus, toolbar, scroll bars, etc.
Work on this bug is in progress, but I don't know if the fix will be available in the coming weeks. These are the known workarounds so you can continue using windows browsing private - one of them will work around the bug:
(1) use tabbed browsing (there is a checkbox in Options > general > "Open new windows in a new tab instead");
(2) shift + click the links to open in a new window with standard features. or
(3) change a bunch of hidden settings as explained below - it will not you make changes to the way you use Firefox, but sometimes you need to enlarge some small pop-up windows that have been sized for a window with no toolbar displayed.
# 3, here are the steps:
(A) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.
(B) in the search above the list box, type or paste feat and make a pause so that the list is filtered
(C) for each preference that begins with dom.disable_window_open_feature. , if it is not 'true', double-click it to true.
You may find that you prefer this anyway, given that sites can band is more these pop-up windows features.
Who is relevant or do you have a different question?
-
C7250 connected wireless works with wired ethernet PC but not wireless PC
C7250 installs fine with static IP address and wired (ethernet) PC works perfectly, but is not recognized by the PC wireless.
Can ping the IP of the PC cable but not wireless computers.
Can connect to the IP address of the browser and can logon to the wired PCs of wireless computers.
When the wireless PC is connected to the network with ethernet cable the C7250 works perfectly.
Firewall is not the issue because I tested with the firewall disabled.
Any suggestions?
Thank you for your help.
I FINALLY FOUND a RESOLUTION but let me describe what I've done to isolate the problem so that others will not do the same things I did.
I used my Windows CE PDA and connected to the wireless router. I made sure that IE could access a different print server wired for a Brother HL-2140 I 192.168.2.10 and it worked. Who checked out that IE was working with a wired device. I then went to Yahoo!, and it worked. Then, I tried to access the C7250 configuration using IP 192.168.2.20 address in IE and it failed. (I checked with my Wired PC I could have access to the configuration of C7250 via IE.) I expected this result.
Then I connected the PDA via USB and verified that I could use it to access the configuration of C7250 use IE on the PDA and it worked.
I then tested between two wireless PC. Could not connect to each other through the router. But if one of them has been wired and one wireless they connected and I have consulted the disks between computers. I also tested the two cables with the same results.
THE PROBLEM WAS IN THE ROUTER.
These tests again virtually eliminated all PC, firewalls (since I've tested with the firewall disabled), the C7250 and the print server for the HL2140 brother as being the source of the problems.
I then updated the firmware of the router to the latest version and repeated all the tests carried out in the complete thread and had the same results.
RESOLUTION:
The router I was using was a Linksys WRT54GS Ver 1.I also had a backup router which is a Linksys WRT54GS 7 worm that had the same settings as the Router 1 worm.
I changed the SSID of the original router (Ver 1) so I would not need to change the SSID in all my devices during testing with the router Ver 7.
I checked the firmware on the router worm 7 was the later and pulled up.
The first test I did was to use a ping wireless PC the C7250 192.168.2.20 and it worked!
I then used the wireless PC and IE to access the configuration of C7250 192.168.2.20 and it worked!
I then checked the port for the C7250 was still a TCP/IP port to 192.168.2.20 and sent a test page to the printer and it worked!
I consulted quickly wireless configuration C7250 and printer a test of a PC cable page and that worked!
Finally, I tested PC wireless wireless PC PCand wired PC and the dirves successfully in both directions and checked that PC wired to wired PC was still working as before.
All that remained was to supply two routers and router swap 1 worm with the Ver 7 router and rerun the tests with the router to Ver 7 manage my real network. Everything works as it should.
I'll keep Router 1 worm as a backup to the Ver 7 knowing router unless the router worm 7 does not only feature that I lose when I reinstall the Router 1 worm is wireless connectivity to wireless, and I can temporarily work around until I get another router that is likely to be a "n" because what is have is ' G;
THANK YOU FOR ALL YOUR HELP PRINTDOC!
PRINTDOC BRAVO!
-
I can connect to my home network, but all the other networks do not work... Error window says:
Windows could not connect to the (X)? network name?
[Link] Solve problems
[Link] Learn more about Internet connection problems
I gave security, uninstalled reinstalled wireless - uninstall security firewall reinstall and not go...
Windows 7
Hello
- What network are you trying to connect to?
- You are not able to connect to the Internet?
- Are you able to connect to the other network with wired network?
Try the methods provided and check.Method 1:
Check out the link and follow the steps.
What is network discovery?
http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discoveryMethod 2:
Check out the link and run the troubleshooter.
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsMethod 3:
Reset the TCP/IP and check. Check out the link and follow the steps.
How to reset the Protocol Internet (TCP/IP)
http://support.Microsoft.com/kb/299357Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in WindowsMethod 4:Check out the links and check out them. -
Hello! I have a problem with my card express 11 b/g/n wireless lan mini pci because I can't connect to internet via wifi but I can connect to the internet via cable. whenever I try to connect it repeat to myself that there is a problem with your wireless network card. I tried troubleshooting, uninstall and reinstall the program, but always the same result. I'm updating too but still the same thing. I use a windows 7 Professional on my Lenovo 412. can someone help me? Thank you!
Hello
Method 1: I suggest you to follow the instructions of the link to solve the problem of network card:
How can I troubleshoot network card?
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems
Method 2: Troubleshoot wired and wireless in Windows network connection problems
You can also post your question in the forum of Lenovo to get help:
-
I can connect to windows live hotmail, but I can't open the emails.
"I can connect to windows live hotmail but I can't open the emails, Server error appears on the screen, but I'm connected to the internet, please help.
Hello
You will need to create a post on www.windowslivehelp.com for questions and assistance in connection with the Windows Live programs and services.
According to the error you found, it may be a known issue, see the following announcement:
-
I can connect to my hotmail account but cannot open, delete or do anything else.
I can connect to my hotmail account but unable to open, delete or do anything else. I tried to reset Internet Explorer, nothing works. Even contacted Microsoft but because it's free hotmail, they sent me an e-mail with a link that I followed to the letter, but without success. Help, please.
View all Windows Live and Hotmail questions in the appropriate forum found here:
http://windowslivehelp.com/ -
Another reason to hate the Photo App. I want to put titles on my photos in an album to explain what are the images. I can do this on my MacBook, but not on my iPad Air. I tried to copy the album (by airdrop) to my iPad, but the titles disappear. Any suggestions?
Since the Photos of OSX application, select an image (once it's in an album, not in Moments) and you can add a comment that is visible in the Photos of iOS.
-
I can open a new browser window, but not a new tab, or by clicking on the sign more or select it from the menu. I have completely updated to firefox and also rebooted. What is going on?
Try to disable or uninstall the extension "Ask Toolbar".
-
Cannot SSH in vmware player (can use the local IP address but not external IP)
As above
Cannot SSH in vmware player (can use the local IP address but not external IP)
Am new to vmware, so if you need information to help me on what you'll need to tell me how to get
See you soon
Vodkaholic27, let me start with the layoff of vodka for a bit and then set Virtual Machine network card to bridged and then assign a static IP address that is appropriate for the guest as the physical LAN operating system is the host. Then in the local physical network for static IP address router you assigned in the guest OS configure it to allow Port Forwarding on the appropriate port. Then, you will be able to access from outside local physical host network. If it's just on the other system on the physical LAN to the host that you want to access the guest you need not set up the Port Forwarding on the router on the local physical host network, simply use linked by a bridge to the network adapter in the Virtual Machine. If you use NAT to the NIC of the Virtual Machine, then you need to set Port Forwarding in the virtual network Editor.
Note: The virtual network Editor is not installed by default in Vmware Player 3.x and later versions.
==========
To install the missing virtual network Editor, the command prompt:
VMware-player-*.exe -e c:\vmptmp
Then in the c:\vmptmp folder find the file c:\vmptmp\network.cab and extract (double-click on the .cab file) vmnetcfg.exe (virtual network editor) file in the working directory of VMware Player usually 'C:\Program VMware Player' or ' C:\Program Files (x 86) \VMware\VMware Player. You can create a shortcut and place it with the shortcut of VMware Player, if you want to access it more easily. Note: there are some for all the files to be extracted to then access the network.cab file.
Maybe you are looking for
-
Automatically redirected with the message "setting have been changed."
A few weeks ago, a friend, I have linked to a router(RT-N12D1) from ASUS on IP 192.168.1.1 and now no matter where I am whenever I browse to 192.168.1.1I get redirected to a page that is display in the attached file, even if I don't HAVE to connect t
-
Windows XP restore to an earlier date.
Recently I did a restore on my computer (about 5 days) and since then, I've lost my help and the ease of support and were unable to print. Can anyone help please?
-
I forgot my password, simple pass does not read my finger
I can not connect. I don't remember my password, I can't use a simple pass.
-
Speakers working more... no sound
Hello Just got my computer service... Just got it home and plugged everything... Everything works great so far, but my speakers are no longer working... When I plug them they play constantly re-verb sound - sounds like a sound wave monotonous type...
-
Question to the first image in a clickable column/line
HelloI hope someone can help. I created a page in lines and columns. All images are a hyperlink in each cell. For some reason, the first image of each line is not clickable, while the rest of them are. I've been in the Inspector, and I can't find the