PIXMA MG3250: Print odd sequence

Similar Questions

• CANON PIXMA MG3250 PRINTER - seeing yellow (danger?) in the top left corner and the printer does not print

  Original title: Ms. Sue Somerville

  CANON PIXMA MG3250 PRINTER

  Yellow light (danger?) in the top left corner and the printer does not print. It was OK until I changed the inks.

  I lost instructions and can't download the manual though, like many others I tried for hours!

  I used little of this printer and just need to do simple, but urgent tasks.

  Are we supposed to it's bin and get another, then we can just get instructions and resume our work?

  I don't know about spacing in your message.  Heh

  This is a question for CANON - those who make and take over the device in question.  Everything you describe indicate that this is NOT a computer / software somehow problem and the problem would be the same if the device was not connected to any computer at all, an OS X one or a Linux one...

  These are the Microsoft forums.

  Here is the Canon forums:
  http://community.USA.Canon.com/T5/Canon-Forum/CT-p/Canon_Forum

  Here is a link to the manual for the device:

  http://www.Canon-Europe.com/support/consumer_products/products/fax__multifunctionals/inkjet/pixma_mg_series/pixma_mg3250.aspx?type=manuals&language=en#Disclaimer

  I suggest out of ink, check you removed all the "stickers" on the ink that * need * to be removed to work properly and make sure that the ink properly.  Print the pattern check nozzles and then to make sure that everything is installed properly:

  1. Make sure that the power is turned on.

  1. Load a sheet of A4 or letter paper format in the front tray.

  1. Open the output tray extension, open the paper output tray, and then extend the output paper support.

  1. Print the nozzle check pattern.

  (1) press on the button in Maintenance for poster has.

  

  (2) press the color or black.

  The ground of review of the nozzle will print.

  1. Review the rationale for control of the nozzle.

• You can disable the MG3250 printer wireless?

  Hi, I bought the canon MG3250 printer and use it with a USB cable and I would like to turn off the wireless. Is someone can you please inform me how to do? Thanks in advance.

  I asked canon, and they patiently answered the following which works!

  

  1. on your PIXMA MG3250, press the maintenance button several times
  until the LED screens: 'G '.

  2. press the black button to disable Wi - Fi.

  Follow the steps mentioned above but instead to refer to allow a Wi - Fi connection, communication, press the colour button.

• Computer can not find scanner Canon pixma mg2550 printer

  Ive perchased today that precedes, but my computer won't find.

  installed and run the installation disc.

  no site ive found don't yet recognize this printer.

  my previous hp printer was not a problem.

  the only thing I mentioned, is the drive of dvd/cd said: 0 bytes to the left of 450?

  can someone help please...

  Moved from Community Participation

  Original title: canon pixma mg2550 printer scanner

  Contact Canon support through their website to see if they can help.

• Canon PIXMA MX922 printer will allow no 2-sided Word documents

  I just installed a new Canon PIXMA MX922 printer to replace an old MX882.  Everything works fine and I am able to print on both sides documents from web pages and e-mail by checking the 'duplex' box on the menu drop down print...  However, I am unable to both sides print all Word documents.  No check box 'two-sided' descend, and no "duplex" option is available, as it was with the MX882.  I never had this problem with the old MX882.  Can you help me?

  Thank you very much.

  Hi LonnieC,

  To set the option to print double-sided on a Mac, please open the printer driver:

  1. Select layout... in the file menu of the application.  The Layout dialog opens.

  2. Select print... in the file menu of the application.  The Print dialog box opens. In the print dialog box, you can set the paper type and print quality for printing.

• A MG3100 Pixma wireless printing

  My Pixma MG3100 printer is usb connected to the Windows 7 PC to my wife and she is able to print at a normal speed. I have a laptop on which I have installed a Xubuntu OS. The laptop or PC is Windows Homegroup.

  When I print from the laptop through the homegroup, however, by wireless, 13KO document that takes just 10 seconds to print from the PC is 60 seconds of the laptop.

  In an attempt to speed things up I would like to print directly from the laptop through the wireless printers while leaving the usb connection to the PC. This is possible if someone kindly explain what I need to do to get there. I have the Canon printer installation disc if necessary. I don't want to interfere with the PC for connection of usb printer where it degrades the printing performance. My wife is not happy.

  Thanks merrymary for your quick response, even if it was not what I wanted to see.

• The Pixma iP8720 print on paper of lb 61 230 g /?

  Can Pixma iP8720 printer power supply & print paper 8.5 x 11 230gsm/61 lbs without rejection or interference? Use this paper for photo printing photo soft cover on an Epson WF 30 book covers. I need a printer better, and I am committed to buy this Canon Pixma iP8720 if it can print on this thick paper at 99%.

  Thank you, Russ

  Hi brassman.

  The PIXMA iP8720 can use plain paper that is 17 to 28 lb (64-105 g/m2) (with the exception of the authentic Canon document) and paper other than Canon authentic specialty up to 53 lbs (200 g/m2).  We do not recommend to use paper that is lighter or heavier than the weight of paper in the printer, as they can jam or damage to the printer.

  For printers that can handle up to 61 paper books, we recommend our Professional Photo Inkjet.  These printers can handle up to 93 lb (350 g / m2) using the manual when the food tray of the printer.

  I hope this helps!

• PIXMA MX882 print serrated or lines stands?

  I have a Pixma MX882 printer who has had problems lately.  When printing straight lines, they come out bleachers or staircase.  This seems to be particularly noticeable when printing horizontal or landscape.  If I print a shipping label to the France for example and it is turned sideways on the page in portrait mode, the lines come out stairs or staircase.  The same is true if I print a spereadhseet in the landscape.  The cell border lines are reinforced.  I run a cleaning complete and done alignment.  Test page comes out fine with no progression. If you have any ideas of what I can do to fix this problem, please asdvise.  Thank you!

  Hi dbghouse,

  Since cleanings and alignments has not resolved the problem, the printer may require the provision of services; Please call or write us using one of the methods on the page contact us for further assistance.

• Where to find the lock of the Pixma MG6320 printer scanner?

  Hello... Where to find the lock of the Pixma MG6320 printer scanner?

  Hi set231,

  PIXMA MG6320 is not a scanner lock switch.  If you try to set the printer for transport, please follow these steps:

  1. turn the unit off.

  2. confirm that the POWER led is off, and unplug the machine.  Please do not unplug the machine while the POWER light is lit or blinking white, as this may cause a malfunction or damage to the machine, the machine impossible to print.

  3. remove the output paper support, and then close the paper output tray gently.  The output tray extension is retracted automatically when the paper output tray is closed.

  4. disconnect the printer from the computer and the machine cable, then connect the plug to the machine.

  5. use duct tape to secure all covers on the machine to keep them open during transport.  Then pack the machine in the plastic bag.  Fix the material of protection to the machine when the machine to pack in the box.

  It has not responded to your question or problem? Please call or write to us at one of the methods on the page contact us for further assistance.

• Canon Pixma iP1500 printer and it connect not gives an error code 20

  I have a canon Pixma iP1500 printer and it does not connect gives an error code 20?

  Hello

  1. If it works much earlier?

  2. did you make any changes before this problem?

  3. What is the exact message you received?

  I suggest to go through these steps and check.

  Method 1:

  This is due to the UAC. Disable UAC will help because UAC prompts the user the permission to continue, the time required to get the question and answer that cause the printer to turn it off.

  If you do not want to activate UAC you can call EnablePrinter when the capture of the EnablePre() event generated by the driver.

  Note: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  Method 2:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3:

  Uninstall the printer driver, download the latest driver on the manufacturer's website, install on your computer and check.

  Step 1: you can download the latest driver from the link below http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip1500#DriversAndSoftware

  Step 2: Uninstall the device from Device Manager driver.

  a. right-click on the icon my computer

  b. Select manage from the menu.

  c. Select Device Manager in system tools that are listed in the resulting display.

  d. right-click on the device.

  e. click on the driver tab.

  f. click on uninstall.

  g. restart the computer

  Step 3: Installed the downloaded printer driver and check out them.

• HP Chromebook 14: I need to connect my Chromebook to my wireless Canon PIXMA MG3520 printer

  I have problems connecting my Chromebook to my wireless Canon PIXMA MG3520 printer. Because of the Chrome OS, it does not connect like Windows or Mac. I need help before their retirement, please.

  Hello Bama-85,

  You're right, the printers do not in the same way on Chrome OS install. I looked on the site of Google Cloud Print and your Canon printer is indeed supported. Follow this link to set up your printer ready for cloud.

  I have not setup a printer Canon via Google Cloud Print, but I guess it's as easy as setting up of HP printers on the print service.

• Driver for Canon Pixma IP4600 printer

  I had to reinstall Windows on my PC due to obtaining a bad virus.  My Canon Pixma IP4600 printer worked before the re - install, but now windows can't find a driver.  I spoke to Canon and they said that they offer is no longer supported, but Windows should continue to support and drivers must come from there.  I tried a driver through Control Panel, but it is said that a driver is not available.  This printer is not that old, so I can't believe that there is no driver available to all.  Can you help me please?

  I'm sorry, but as I explained Microsoft does not write drivers for Canon products.

  Microsoft writes and provides drivers for their own products.

  All drivers that Microsoft may provide in their OS for Canon products provided by Canon.

  I suggest that contact you Canon and get them to set this output or first try the Vista drivers.

  Kind regards.

• Windows 7 can not find .inf driver for Canon Pixma iP4000 printer connected to Windows XP.

  I have a laptop running Windows 7 (64-bit machine) I want to print from.  The laptop is on a home network wireless.  The office is wireless as well and is running Windows XP.  The Office has a Canon Pixma iP4000 printer connected with a parallel cable.  I installed the latest XP drivers for the printer on the desktop.  The laptop can connect directly to the printer with a USB cable and drivers will download automatically and it will print correctly.  However, I can't connect the printer using the wireless system.  I can go on the laptop to the home network and navigate to the printer and try to install.  It makes an automatic search and says that it cannot find the correct drivers.  I can browse to the file to install on my desktop, but it of an .exe file and not. INF.  I run the .exe file and it installs too, but Setup of printer on the laptop won't let me not by the .inf screen add to complete the installation of a wireless printer.

  Any suggestions?

  Very probably the XP driver name is different from the name of 64-bit driver.  Create a Local Port which copies the data to the print size in Windows 7.

  Here is an article knowledge base how to the names of the incompatible drivers.  Replace the Windows 7 machine for NT4 machine referenced in the article.

  http://support.Microsoft.com/kb/282842

  If you load the printer driver 32-bit on your 64-bit computer, you need the 32-bit driver for Windows 7.  You can do if you have a 32-bit computer of Windows 7 on the network to push pilots up to the machine that is sharing the printer.  None are flat files on the Windows 7 DVD, you need to install the OS or mount the ISO.

  The key to successful sharing between computers that run different printing architecture processors is pilot name.  PCL6 equal NOT PCL 6.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• You want to print a sequence of files.doc & *.pdf.

  Using Win 7. In Windows Explorer, I can right click on a.doc or *.pdf file name and select print and the file will be printed and focus returns to explore. Can I write a CMD script that will perform this operation to print a sequence of files? I have about 70 files to print. With a few changes or additions to my list of files, I want to print them on once or twice a week, so some automation of the task would be very useful.

  Yes, you can write a script or create a batch file, there are many script sites that can help or you can try an appropriate set of Technet, or maybe the Group Office/Word

• Driver for windows 8 for canon pixma mp600 printer

  A driver is available for a canon pixma mp600 printer/scanner for windows 8?

  Canon Support and downloads would be if it is available for windows 8.