HP Chromebook 14: I need to connect my Chromebook to my wireless Canon PIXMA MG3520 printer

Similar Questions

• What Canon app will connect my iPad on a new Canon PIXMA MG2920 printer and why my iPad seek only an AirPrinter but couldn't find the gun?

  The title of MY topic is the summary.

  Your printer without wire - but unfortunately is not able Airprint. That's why your ipad do not.  There is a Canon print app available that can help you - its called PPS - then take a look in the app store.

• Windows 7 can not find .inf driver for Canon Pixma iP4000 printer connected to Windows XP.

  I have a laptop running Windows 7 (64-bit machine) I want to print from.  The laptop is on a home network wireless.  The office is wireless as well and is running Windows XP.  The Office has a Canon Pixma iP4000 printer connected with a parallel cable.  I installed the latest XP drivers for the printer on the desktop.  The laptop can connect directly to the printer with a USB cable and drivers will download automatically and it will print correctly.  However, I can't connect the printer using the wireless system.  I can go on the laptop to the home network and navigate to the printer and try to install.  It makes an automatic search and says that it cannot find the correct drivers.  I can browse to the file to install on my desktop, but it of an .exe file and not. INF.  I run the .exe file and it installs too, but Setup of printer on the laptop won't let me not by the .inf screen add to complete the installation of a wireless printer.

  Any suggestions?

  Very probably the XP driver name is different from the name of 64-bit driver.  Create a Local Port which copies the data to the print size in Windows 7.

  Here is an article knowledge base how to the names of the incompatible drivers.  Replace the Windows 7 machine for NT4 machine referenced in the article.

  http://support.Microsoft.com/kb/282842

  If you load the printer driver 32-bit on your 64-bit computer, you need the 32-bit driver for Windows 7.  You can do if you have a 32-bit computer of Windows 7 on the network to push pilots up to the machine that is sharing the printer.  None are flat files on the Windows 7 DVD, you need to install the OS or mount the ISO.

  The key to successful sharing between computers that run different printing architecture processors is pilot name.  PCL6 equal NOT PCL 6.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Canon Pixma iP1500 printer and it connect not gives an error code 20

  I have a canon Pixma iP1500 printer and it does not connect gives an error code 20?

  Hello

  1. If it works much earlier?

  2. did you make any changes before this problem?

  3. What is the exact message you received?

  I suggest to go through these steps and check.

  Method 1:

  This is due to the UAC. Disable UAC will help because UAC prompts the user the permission to continue, the time required to get the question and answer that cause the printer to turn it off.

  If you do not want to activate UAC you can call EnablePrinter when the capture of the EnablePre() event generated by the driver.

  Note: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  Method 2:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3:

  Uninstall the printer driver, download the latest driver on the manufacturer's website, install on your computer and check.

  Step 1: you can download the latest driver from the link below http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip1500#DriversAndSoftware

  Step 2: Uninstall the device from Device Manager driver.

  a. right-click on the icon my computer

  b. Select manage from the menu.

  c. Select Device Manager in system tools that are listed in the resulting display.

  d. right-click on the device.

  e. click on the driver tab.

  f. click on uninstall.

  g. restart the computer

  Step 3: Installed the downloaded printer driver and check out them.

• Unable to connect w / Canon Pixma MX860 printer now I ElCapitan.  Need to print today... any suggestions?

  Just upgraded to El Capitan and now cannot connect with Canon PIxma 860 and not financially able to buy a new printer... no workaround solution suggested?  Canon has written is not compatible with El Capitan.  I have to get off at Yosemite?  Thank you.

  http://GIMP-print.sourceforge.NET/MacOSX.php

  This link should make your printer work again.

  That said, I've not heard of Captan El is not not compatible. But this fix should work.

• How can I connect via Wi - fi on my canon mg5300 series printer?

  I have no problem printing via a usb connection. When I try to connect wirelessly it says the printer is offline. I've set up the connection Wireless to the printer already.

   A the answer thanks!

  Hello

  Thanks for choosing Microsoft Community forum!

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
  Before performing the troubleshooting provide us information.

  1. which version of the operating system is installed on the computer?
  2. what happens when you try to print?
  3. you receive an error message?

  Let us try the troubleshooting provided steps and check if it helps:

  Method 1:
  You can perform the steps in troubleshooting from the link and check.
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
  Note: Apply as well to Windows 7.

  Method 2:
  You can try following the steps in the link and check if it helps:

  The new status of the printer is "offline" after you remove a print queue and then restart a Windows computer

  http://support.Microsoft.com/kb/2027593

  
  Method 3:

  You can temporarily disable the antivirus and firewall installed on the computer and check.

  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  NOTE: Turn off Windows Firewall might make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
  You can see the following link to disable the Antivirus installed on your computer software.

  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Links:
  Install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Add a device or computer to a network

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

  If you need further assistance, please answer and we will be happy to help you.

• Could not establish a connection to wireless canon mx 340 printer

  Original title: I have a canon mx 340 printer which is wifi. I have a Wi - Fi connection at home and on my computer. I can not connect WiFi to my printer? How can I solve this. Attached to the printer and drivers installed aldready. ?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Your printer is network ready printer.

  This means it should connect directly to the wireless router and then to serve as a network printer.

  The best network printer installation is to install it via the utility that is provided by the seller.

  If it does not automatically establish a connection with the wireless router, read the printer manual need instructions how to manually configure settings wireless on the printer itself.

  As an alternative, the printer can be connected to the router via a cable. Wireless audio can be configured from any computer with the software, when it works, it can be unplugged and go wireless.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I need a driver for windows7 for canon PIXMA IP4200 printer

  Please send me a link to printer driver download canon PIXMA ip4200 for windows7. Thank you

  Go to this link:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip4200#DriversAndSoftware

  Select your operating system from the drop-down menus and then download the driver you need.

• Need to connect to the home network wireless - Windows XP Pro - error with network password - needs to be 40bits or 104 bits...

  I have a new laptop at home which has windows xp sp 2 is installed.  I am trying to connect to my wireless network.
  I get the following error;
  The network password needs to be 40bits or 104bits depending on your network configuration.  This can be entered as 5 or 13 ascii or 26 hexadecimal characters.

  I gave my father a new laptop computer this fall and he gave me one that had given him his friend... I've never worked with XP Pro...

  We have several other phones on this account wireless at home.

  You try to login with the wrong encryption method and you have this implemented extremely secure wireless network.

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing. MS - MVP - Elephant Boy computers - don't panic!

• At startup, I get the message "Windows needs to install driver software for your UNKNOWN DEVICE" I am unable to use a Canon Pixma HP280 printer.

  Have talked at length with cannon Tech I informs me that the problem is not a problem of hardware and Microsoft Software

  I've seen several posts on a 'SPOOLER PROBLEM'

  Manual Cannon don't mention spooler.

  My system is Windows Vista Home Basic 32-bit.

  Thank you

  Go to the Device Manager and see if "other devices" is listed, then uninstall it.
  If the device is connected before the driver being installed or the driver was not installed correctly, the device will appear under 'Other devices' or 'unknown '.

  see this:

  Service and Support
  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp280?selectedName=ServiceAndSupport

  Click on "Frequently Asked Questions", then click on "remove [device] of Device Manager.

• Cannot connect by Satellite A355 for a Canon IP Pixma 5000 on a LAN

  Recently, we purchased the Toshiba Satellite A355-S6925, which has the operating system Windows Home VISTA 64 bytes.
  The Canon Pixma 5000 printer is directly related to a Windows XP-based computer by using the 32-bit operating system.

  When I go to add a printer (Option LAN) the Toshiba sees Canon printer but then returns an error message that there is a bad driver. When you go to the next step, it says that it cannot find the correct "INF". I suppose the INF file is actually on the remote computer on which the printer is connected to. So a question, where is an INF printer on a Windows XP computer?

  A test, I plugged the printer directly on the Toshiba and the loaded Toshiba driver the printer. I hoped that could solve my problem, but it didn't. When I tried to add the printer, once again, like a remote printer I got the same error message that it could not find the INF file.

  The "Add a printer" Wizard see Canon printer on our LINUX computer. In fact when I added the printer connected to the LINUX computer, I can print from the Toshiba. While this works, it's a bad solution, because I'm still not able to print directly to the remote printer.

  Another experiment, I tried to use the printer installation disc, this was rejected by the Toshiba since he was a pilot of 32 bytes. I also downloaded from the site Web of Canon driver 64 bytes, but once again the Add Printer Wizard said that there was a missing INF file... So I always assume that I need to point to an INF file that is located on the Windows XP computer?

  Any advise?

  Great news and thanks for your comments!
  On the State of ink, you may have to contact the manufacture of the printer.

  Good day!

• Connect the canon PIXMA MG7120 for Mac

  Problem: Cannot connect computer and a canon PIXMA MG7120 printer

  Have it hard cable with a USB cable.

  Did all the set up with the printer.

  Have updated firmware today.

  I have not had any problems with the initial installation.  Close this printer for a few months and returned to

  working here, but failed to get a connection between iMac laptop computer and printer PIXMA MG7120

  Help, please!

  Two of these printers are in different places.

  Use the same computer at both locations.

  Suggestions?

  Hi bethbishop,

  We can reset the printer on your Mac and then reinstall the printer using the latest drivers on the Canon USA site to try to get the printer connected to your computer.  To do this, please follow these steps:

  1. go on the icon of your Apple in the upper left corner of your screen.

  2. click on System Preferences.

  3. click on Print & Fax

  4. right click your printer on the left, then select "reset printing system".  Note: If the right click does not work, press and hold the control key on your keyboard and then click the mouse button.

  5. If your printer is still on the left select your printer, and then click the minus (-) button to remove it.

  6. restart your Mac.

  Then please click here to access the page PIXMA MG7120 drivers and software.  Once on the page, follow these steps:

  1. check that the operating system detected in the "OPERATING SYSTEM" drop is correct and if this isn't the case, please click on the drop down menu to select your operating system.

  2. then, please, click the red arrow next to the "RECOMMENDED FOR YOU" section and click on the DRIVERS AND PACKAGE of SOFTWARE FULL file.  When you do, a red DOWNLOAD button will appear. Please click the box below the button DOWNLOAD, and then click DOWNLOAD to start the download. The time for the download process can vary depending on the speed of your Internet connection and the size of the file being downloaded.

  Once the file is downloaded, please double-click it to install all the printer drivers and software on your Mac.

  I hope this helps!

  It has not responded to your question or problem? Please call or write to us at one of the methods on the page contact us for further assistance.

• Add a printer on a vista laptop on. Canon pixma ip3600 Office xp wireless worked until the laptop stops. now get error when you try to connect to it.

  computer Vista laptop does not connect to destop printer

  Add a printer on a computer laptop port local \\computer\printer) on the computer vista laptop. (for xp wireless canon pixma ip3600 Office worked until computer laptop shutdown. now get error when trying to connect.) How to install printer permanent on laptop?

  Hello

  1. What is the exact error message you get?

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  It will be useful.

• Printer Drivers MP - connection failed - Canon Pixma MG2570 on Win 8/64 OS and OS Win 7/64

  Hi, I bought the Canon Pixma MG2570 last week and I was not able to install drivers MP on my Sony Vaio Win 8/64 OS or a Lenovo Win 7/64 OS. I tried to install from the CD provided and failed in my attempts. He gets hanged on step 3, the screen of printer connection and I had to uninstall and reinstall the number of times software. Even so, he didn't. I downloaded a few times most recent drivers on the canon website, but I failed to properly install the printer. Please help me to install this printer on my devices with the above configuration. I am not able to solve this problem despite troubleshooting provided in the manuals online as well.

  Thank you

  Sampath Prakash

  Thanks Srimadhwa for the reply.

  I thought that it was with the usb cable provided with the printer, it was not connected properly where the error on the screen. The MP drivers got instantly installed on the system. The Canon Pixma MG2570 printer works also perfectly on os Win 8/64 and Win 7/64 os. Thanks again.

  -HOMELESS

• Need to connect MacPro to the router

  My Mac Pro is now connected to the internet via the airport card and the modem is down. But I need to connect a router on a mac so I can run my laserprinter through a network using a RJ45 cable. I can't run the cable in the area of the modem is located. Can I connect the router directly to Mac and use the card airport as the internet connection?

  Dbarunas,

  You left out some important details, but let me see if I can answer without them:

  Assuming that the ISP modem you mentioned is your current destination of wifi and Airport card is built-in wifi Mac Pro adapter.  I also guess your desktop not a laptop since you don't mention MacBookPro.

  1. If your router is wireless and assuming that the 'airport' is the the computer's built-in wifi card.

  (Wired connection) modem-> router (cable) * (wifi)-> laptop (wifi) (* printer cable) to connect to the router via wifi instead of the modem, then turning off the wifi on the once the router WiFi modem set up, if possible. (No need to nuke the family bits with too many signs wifi).

  2. If your router is not wireless.

  Modem-> laptop (wifi) * (wired)-> router (wired) (wired)-> printer (cable) (* make sure that the computer has not a gateway specified in the network settings for this connection assigned static address.)

  3. If your router is not wireless and no other host on the router. (without router required)

  Modem (wifi)-> laptop (wifi) (wired)-> * printer (cable) (static addresses the only, once again no gateway) (* this may require a crossover based on the capabilities of the printer Ethernet cable.)

  When you use a wired network on the laptop and wireless Internet access, make sure the "backend" network cable is on a completely different range of addresses and 'NO' gateway assigned or the laptop would not know how to get to the INET.

  Joe