[Place 11 5130 pro] On the hub NGFF
I discovered a hub NGFF hidden under the NFC chip, I wonder if a 22 mm * 40 mm NGFF DSS works on this? Or if I can add a 3G antenna through this centre?
SSD, I fear, would not work because NGFF is actually a USB 3.0 interface, but a 3G network of this size card works (already confirmed).
Tags: Dell Devices
Similar Questions
-
Dell 11 5130 Pro place wake from sleep.
Tried to solve this problem for weeks looking at various forums. No luck. I had to do a complete Windows from scratch reinstall because Windows refuses to load one day and my effort of recovery Dell USB disk do not have and I couldn't fix it otherwise the operating system. Before that, I don't have the problem of sleep. After the re - install a drive of Windows 8 currently possessed subsequently upgrade to 8.1 Windows and then reload all current Dell drivers "don't wake him of sleep problem" began. It's also complicated by the fact Dell the serial number of the BIOS as a model 7130 not recognize the 5130 that one actually. I hope that the problem may lie in my BIOS settings somewhere so is possible that someone who isn't having the problem of sleep can publish some BIOS settings that can give me at least a starting point that I can work from? Thanks in advance for any help that can be made.
Obtained by. I needed some additional stuff, but here's what I did: (1) using another computer Win 8.1, created a Windows 8.1 USB bootable. (2) plugged a USB keyboard and a USB hub on USB single and then plugged my USB port in the hub (with Tablet detached from its regular keyboard)... (4) restart and press the F12 key start USB (6) go to settings, select keyboard (5) and apply to an update of the plant (the "soft type where he keeps my data). Then it restarts fine.
Theoretically I should have been able to hit F12 to the regular keyboard, but it is configured so that it does F12 also hitting the Fn key and for a reason that has never worked.
Once, I just follwed advice here (en.community.dell.com/.../19534289) and removed the Service Packs, KB2883200 and KB2887595.
-
I have a Windows Server 2008 R2 system. I use Adobe Acrobat Pro XI. I'm looking for the place where I can change the default Miinion Pro to Calibri font?
Tools, content editing, formatting
You can't change it.
Tuesday, January 13, 2015 11:22, tonywaidmann [email protected]>
-
Sound is gone on my Macbook Pro. The sound icon went gray. This followed two downloads of password security applications and then deleted. The third I have kept and entered my password. If I go into the Time Machine to restore the system will delete the security of password I put in place after the last Time Machine backup?
Thank you for your willingness to get out me of trouble!
Hi Vincent,.
I understand that you are no longer able to control the audio output on your Mac after installing a few different security applications. If you want to use Time Machine to back up or restore your Mac at one point before installing these applications, it is absolutely an option. However, keep in mind that this kind would remove, indeed, any changes made after the point of this backup, including installation and configuration of said software.
Alternatively, you can consider having a look at the article in the link below for steps that can help to restore the functionality of audio output on your MacBook Pro.
Troubleshooting for any audio speakers on Macshttps://support.Apple.com/en-us/HT203186
Sincerely.
-
Connect the airport to the hub of sky - sharing wireless problems
I just bought an Airport Extreme and try to connect it to my sky network hub (q) existing.
I had it put in place, with it connected via ethernet to my hub of heaven.
I have 2 external hard drives connected to the Airport Extreme and was a time machine back to one of the attached disks. That everything worked very well, wait for the back up has been extremely slow (she had only managed 30 GB in 3 hours, and to do a TB). I realized that the airport had created a wifi network of its own, and I was wondering if it was interfering with my main one sky, so I turned off the wifi at the airport. Now I can not connect readers to share. Utility can see them, but on my macbook, when I click on to connect to the server from the airport, it does not connect.
Should it? I know I shouldn't need to run 2 wifi networks if my Airport Extreme is connected to my router from Sky via ethernet? With gratitude any help appreciated!
Catherine
When it is connected to the hub Sky by Ethernet, your AirPort Extreme should be reconfigured as a bridge.
To do this, use the AirPort Utility, as follows:
- Run the AirPort Utility.
- Select the extreme and then, select change.
- Click the network tab.
- Change the router Mode to: Off (Bridge Mode).
- Click on update and allow the base station restart.
-
Memory can be increased on a late 2013 Macbook pro of the retina?
Memory can be increased on a late 2013 Macbook pro of the retina?
It is welded in place and not extensible
-
Why I'm not able to see nvidia as a MacBook Pro with the Retina display graphics card
Why I'm not able to see nvidia as a MacBook Pro with the Retina display graphics card
MacBook details below?
Model: MacBookPro11, 3, MBP112.0138.B15 of BootROM, 4 processors, Intel Core i7, 2.3 GHz, 16 GB, MSC 2.19f12
Graphics card: Intel integrated Iris Pro, Intel Iris Pro,
Graphics card: NVIDIA GeForce GT 750 M, NVIDIA GeForce GT 750 M, PCIe, 2048 MB
Memory module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020
Memory module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020
Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 134), Broadcom BCM43xx 1.0 (7.15.166.24.3)
Bluetooth: Version 4.3.6f3 16238, 3 services, 18 aircraft, 1 incoming serial ports
Serial ATA Device: APPLE SM0512F, GB 500,28 SSD
USB device: Memory card reader internal
USB device: USB OPTICAL MOUSE
USB device: HUAWEI Mobile
USB device: Hub BRCM20702
USB Device: USB Bluetooth host controller
USB device: Apple keyboard / Trackpad
Bus crush: MacBook Pro, Apple Inc., 17.1
Thank you
gis_abc
He seems to show NVIDIA graphics card.
Kim
-
Update the "hub closing pc?
Hi sorry if this is in the wrong place, if so someone can you please tell me where to put an update to a previous post? However, considers that the hub, I got it and I'm still waiting to see if it is faulty, blaming weather and Christmas at the moment, but I had another, and that works fine, so suspect that it is that. Thank you very much Richard and all those who have posted.
When I plug a hub 7 ports in a my pc usb slot stops. No idea why, please?
-
Hello, I'm having a problem with my site, I use my meeting place for all my school work so fixed its very important for me to try to get it.
My problem started when internet explore work stoppage, I need to click on the application and it would be open but not charge anything on the page, I have to type a web address and nothing. So I decided to do a refresh of the Tablet and when I used my flash driver were I got my stored backup I get the error message that the files are corrupt. so I go to the dell website and it connect to the Microsoft Web site and created a recovery for windows 8 using Microsoft Media creation tool.
so I continue to reinstalled windows 8 and now I will have questions without network driver so I can't connect to the internet and the touch screen does not work. I've dealt with dell customer support and I tried twice to get the flash recovery drive who twice
I found that there is not since both times I tried to buy the USB key, the command is cancelled 4 days later.
any help would be greatly appreciated
You need a USB hub. Connect the hub with an adapter USB - OTG to the USB port of the place, then put the 'Intel Atom Z3000 Series Driver' and 'Dell Wireless 1538 WiFi/Bluetooth Driver' on the stick and plug it into the hub. Then also plug a USB mouse and use it to select and install the drivers. After this should work the wifi and touchscreen. This is a normal behavior of windows 8.
You can get all the drivers here:
-
Meeting place for DELL Pro 8 - option missing sleep after updated
I own a DELL Pro 8 meeting place. After updating drivers, the tablet will not sleep and pressing the power button is no longer in the Tablet 'SLEEP' mode. SLEEP option is completely missing the Tablet remains on constantly even when not used.
The updates that I applied are
Pilot series Intel Atom Z3000
Running reliable engine Driver Intel
5570 WWAN and GNSS (GPS) Driver Wireless Dell Mobile Broadband
I've found a workaround.
I found that disable driver Wirless 5570 Mobile broadband device Windows re-activates the SLEEP feature Manager. This would indicate that the problem is with the driver 5570 Wireless. I tried to downgrade to a previous version of this driver, but Mobile broadband will completely stop working.
I suppose that others have the same problem, if you have not applied the latest updates and a meeting place for Dell Pro 8 with a card 3G it would be a good idea to not update drivers at this time.
In the end, I updated the Windows operating system files and installed A03. Could not get A04 or A05 works not at all.
It is clear that these updates have not been tested on the site of Dell Pro 8. I highly recommend to avoid updating the driver for the card 3G until an adjustment for the driver of the object is released.
The reality is that Dell has released a product with a digital pen that does not work properly and use a 3G card that does not work properly. In general I would avoid Dell Windows tablets in the future, if you do not have to use Windows 8.1 I would recommend that you buy an Apple iPad.
The iPad is a fantastic table.
-
Question about place 11 dock Pro
I don't know if anyone has an answer to that. The coming Pro 11 dock also supports the Latitude 10 ST2? And the dock for the Latitude 10 ST2 will support the coming 11 Pro? The connectors are the same, although the output power of the power adapter are different.
I'm just very disappointed with the charger for the Pro 11. I had to replace 2 so far. They start very well but eventually will be will not charge more than 3 watts. I have a Latitude 10 ST2 dock flying over and it would be great to use instead of the USB micro-connecteur.
Look forward to your responses!
Mike
michaelahughesI don't know if anyone has an answer to that. The coming Pro 11 dock also supports the Latitude 10 ST2? And the dock for the Latitude 10 ST2 will support the coming 11 Pro? The connectors are the same, although the output power of the power adapter are different.
I'm just very disappointed with the charger for the Pro 11. I had to replace 2 so far. They start very well but eventually will be will not charge more than 3 watts. I have a Latitude 10 ST2 dock flying over and it would be great to use instead of the USB micro-connecteur.
Look forward to your responses!
Mike
Not officially. You can load on it although if you try to load a place 713 x on ST2 platform you might encounter problems due to the lower voltage adapter. If you simply reload while not using it, you should be OK. If you are actively using the device that you could actually see the battery draining even while on the dock. Some ports will work, others do not. Original plan was to support, but the issue of the tension which has killed so full support has never been added/tested/claimed. -
meeting place for Dell pro screen flashing on make or receive a call
Hello
My place of dell pro screen start flashing once the call is established. Sometimes, the screen remains black as if swithced off. This happens all in making a call or once I answer a phone call. The touch screen is disabled for the duration of the call. Once the Group at the other end disconnects screen becomes active again. I called dell support and they advised to reset to the factory settings. Tried, but the problem still persists.
Please tell us what needs to be done.
Thank you...
Hello
Had the same issue, but took off the protective film that came with the phone and resolved immediately.
The default phone has a battery mode that disables the display when it in next to you ear and an appeal is in economics.
Seems the protective skin band prevents the phone to detect when its next to your ear
-
Tabs and action items as in the hub
Hi guys,.
I'm trying to get a TabbedPane working with action on bar points and overflow as you can see in the hub, but I can't get the two working together. If I use a TabbedPane followed do not appear on bar or overflow. If I use a NavigationPane action items work, but I can't use the tabs...
This is an image I found in the native BlackBerry documentation. Here, you see the button on the tab on the left, three elements of action on bar and the overflow action items opener.
Can someone please give me a hint or example?
Kind regards
Jan
You must add the ActionItem to the Page, as follows:
import "Webview" import "Account" TabbedPane { tabs: [ Tab { title: qsTr("A Tab") Page { Label { text: "Hello World" } actions: [ ActionItem { ActionBar.placement: ActionBarPlacement.OnBar title: "An action item" } ] } } ] }
-
Call your own map of the hub to help compose action
Hello!
How to put in place bar - descriptor.xml put your app on the list of those applications by composing action lodged in the hub?
I see that WhatsApp can do.
Best regards
SOAman
So that this works, you should first actually integrate your application with the hub by using the UDS API which is now available in point 10.2. One of the appeals of installation with this API tells the hub that your application supports new action message, which is finally being implemented by a call to a target particular bb.action.COMPOSE that your application provides.
However, I believe that you must first request access to use this API, so they can add the necessary permissions to your signing key. Once they do, I think they will also send you some more information and sample code.
-
PIX with H &; S VPN DMZ hosting web server to the hub
Ok
Heres a problem which I think would be quite common for these even remotely conscious of security. Unfortunately, my knowledge of the PIX (as well as other Cisco devices) is still in phase of 'growth '.
So, here's the problem. I have a WAN put in place with PIXen and SonicWalls, we are set up in a design essentially Hub and Spoke (fine ok so it is partially meshed). We recently decided to pull the trigger on getting a 'real' web site and everything went relatively well that getting up and rolling. (even with my notice of 3 days/deadline), but here's the problem: I set up the web server on the DMZ to the hub pix, and I figured out (the easy part) how to set things so in the Home Office, people can connect to the web server by using the internal address, but I don't know what to do for people in remote offices with VPN home connections. I tried to define static routes, I tried to add the DMZ to the VPN trigger, I tried to do both of the last things together, and I checked that I have rules allowing traffic to the VPN outside the DMZ on the inside. So, what else can I I get?
I have no problem by configuring a PIX for all basic ups and VPN even at this stage, I can do most of it through the CLI (even if I still want to do more through the PDM). My biggest stumbling block on the PIX has so far was when I actually involve this pesky DMZ...
I actually two PIX in my office, two for my network domestic (one for my place in the States and one for my place in the Japan), so if you can help me, I'll be the two problems and do not forget to give a rating of excellent reviews!
so I guess that leaves me to the place where I scream...
Help!
and I humbly await your comments.
the current pix configuration should look at sth like this,
IP access-list 101 permit
IP access-list 110 permit
Global 1 interface (outside)
(Inside) NAT 0-list of access 101
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp-3des esp-md5-hmac superset
myvpn 10 ipsec-isakmp crypto map
correspondence address card crypto myvpn 10 110
card crypto myvpn 10 set by peer
superset of myvpn 10 transform-set card crypto
interface myvpn card crypto outside
ISAKMP allows outside
ISAKMP key
address netmask 255.255.255.255
isakmp identity address
isakmp nat-traversal 20
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash md5
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
now, to add dmz on top of the existing vpn, add the following to the pix (and apply the same concept on the remote end device)
access-list 102 permit ip
access-list 110 permit ip
nat (dmz) 0 access-list 102
Maybe you are looking for
-
RTM of Windows 8 installation Fail on Touchsmart 600-(1050)
Has anyone else had much luck RTM of Windows 8 on a Touchsmart 600 installation? My installation starts ok, but after the first reset it everything is there with the logo and the whirlpool circulating. The boot record, I checked and I have a suspicio
-
graphics compatible with ideapad y510, Windows 7 ultimate 64-bit NVIDIA driver?
I reinstalled my ideapad with the new windows 7 64 bit. Everything works fine; the requirements for my video or graphics card. I have nVidia graphics (perhaps Geforce 8600 or somethings like that). But after that I got this new win7, older drivers ar
-
my laptop will not be updated! error 80240016 it has never updated anything since born!
I bought my insipron 1520 like 2 years ago! and since then it has never updated anything! I can not install any antivirus, update or anything! He has 17 important updates. When I press the button install it shows this error 80240016, and it is not up
-
Hey guys, I just bought an Acer Predator G3-605 today. I downloaded 3 games and my C drive is full already and my D drive is completely empty. I need your help. Thank you
-
My Atheros AR5007EG wireless network adapter will not work
I have an Acer Aspire One AOA150ZG5 that only comes with Windows XP directly from the factory. I recently started having trouble with XP so I switched to Windows Vista Home Premium and now my wireless card doesn't work. I tried to go to the manufactu