Question about place 11 dock Pro

Similar Questions

• Question about upgrading to WXP Pro

  I recently bought a model number Equium PSM57E a friend. I got was the laptop and the charger, HDD played upward, so I replaced it with a blank, but now I am installing WXP Pro on the machine and it keeps hanging on me. I just get a message saying "the installation program starts windows.

  There is no light coming on led to show any type of hard disk activity, I was wondering if the laptop was a dud total until I managed to get windows I'm working on it, but trying to take WXP pro as operating system, is beyond me.

  Just in case you are wondering I have flashed and updated the bios, but was wondering if I need a third-party for the disk controller driver as the hard drive seems dead, when you try to upgrade.
  Thanks in advance for any info you can give me.

  Hi John

  It seems that you have an Equium M50 PSM57E.
  One question: are you sure you bought a good laptop to work?

  In any case, first of all, you must check if the BIOS can recognize that the new installed HDD and check if you have purchased a HARD drive that is supported by M50.

  To my knowledge the BIOS supports a HARD drive size limitation.
  This means that not all HARD drive sizes are supported, and may not be used!
  But after some discussion here in the forum the Equium M50 should be able to manage a 100 GB HARD drive.

  Finally and above all remember that you use WinXP Pro, which already supports the SP2. This is necessary and important.

  Good luck

• Question about webcams with Macbook Pro 13-inch, mid 2010

  Bear with me as I am the most fundamental basic Mac users. I am currently using a MacBook Pro (13-inch, mid 2010) with OS X Yosemite 10.10.5 I don't use Skype or FaceTime or something like that. Recently, I joined an online course in which they said I need a webcam, headset and microphone so that I can communicate with my instructor and discussions in class.

  I have really no idea what hardware inside is on my laptop. Is the built in camera something that could be used for this purpose? Or do I need to buy these separately three elements to make this work? And if yes, are you easy to install and can anyone recommend something good, but also low-cost as possible.

  Thanks in advance for your time.

  michellew_ wrote:

  Is the built in camera something that could be used for this purpose?

  Or do I need to buy these separately three elements to make this work?

  Your built in FaceTime, camera is sufficient. This is the idea. outdoor cameras are mostly a thing of the past. If the internal webcam is broken, an external is always an option repair vs.

  You may need their proprietary software to connect to their course however

• Question about the new Satellite Pro P100 PSPAHE HARD drive

  Hello

  Can someone tell me, if I can use this drive in my notebook? The original is just too slow.

  Seagate Momentus 7200.2 2.5 "SATA 8 MB hard 100GB (ST9100821AS)

  It's a sata-II drive. The laptop will not work with sata-I accelerates, but it will be even faster.
  I know 3.5 "are compatible. What drives 2.5 "?
  The thickness of the disc is going to be ok?

  Thanks in advance,
  Martin

  Hello Ariane

  What model of laptop do you have exactly? Is your laptop Satellite Pro P100?

• Question about BIOS for Satellite Pro A10 files

  Hello

  I have Toshiba Satellite Pro A10 and later yesterday, he won't, he past the TOSHIBA start screen and then black with a flashing cursor, it didn't leave me in advanced settings or the settings of the BIOS, a friend told me I need to Flash BIOS, I came across the site and found only a BIOS update and management told me to use the floppy drive , he said when I unzip the file I get an .exe file which I opened and it will give me three files, one for the CD ROM, one for the floppy drive and the third I don't remember, but it didn't happen, when I unzipped the files in a temporary folder, but I never had the files.

  I think I had to have it on my own laptop, and then it would be extracted properly, because my laptop does not work I can't do and even if I put the files on a disk, they are too big.

  Then...

  Where can I get the files from the BIOS that I can put on a floppy disk and then I can boot from that disk and it will fix the BIOS?

  Thank you

  Hello

  OK, follow these steps:

  Burn the file bios to CD on a CD, boot from it and update your bios. It's a simple and easy way. I Don t understand why it shouldn´t work, given that I ve updated my bios in the same way. I burned the image to CD and booted from this CD.

  Please answer perhaps you just made a mistake when you think to (I sometimes do too much, not often, but it happens..)  :)

  Welcome them

• Question about switching from XP pro to Vista on a Tecra A9 - 102

  Hi can anyone help... I am looking to buy a laptop Tecra (probably A9-102) with Windows XP Pro already installed, but I'm wanting to be sure, I can't be upgraded to Windows Vista in the future?

  Hello

  If you see the Toshiba download under http://eu.computers.toshiba-europe.com support page & downloads you will see that Tecra A9 is supported in Vista and everything you need for Vista you can download here.

  Because of this, you can buy this laptop model and enjoy WXP or Vista operating system.

• Question about recovery for Satellite Pro A120-185

  I had a with the laptop recovery CD. I wonder if he has the operating system also (windows Vista) and I have the right to request a copy of the operating system?
  Is - this CD has everything that was originally on the laptop (all software)?
  And how to restore to factory State with the combination of keys on keyboard to image on the hard drive? This also restores programs and everything too?

  Hello

  You bought the laptop with pre-installed Vista OS?
  If so, the recovery CD should contains the operating system Vista, all Toshiba drivers, tools and utilities and additional software.

  > Is - this CD has everything that was originally on the laptop (all software)?
  Yes, as I said above the Toshiba on the restore CD image contains everything; Operating system, drivers and programs.

  If you use the recovery for the reinstallation CD, you will set the laptop to factory settings.
  But beware, this procedure will format you whole HARD disk and will delete the existing partitions.

  If you want to install from the recovery CD, try to boot from this CD and follow the guide line. It is very easy.

• Question about placement within a region report to

  Hello
  
  I often put articles in parts of report to the texbox etc search fields. Normally the elements placed above the body of the report, but since we have adopted a new theme, the items appear under the report.
  
  Can someone tell me where I can control the rendering order of the elements within the region of tht compared to the body of the report?
  
  We use the Apex 3.2
  
  Thank you very much
  
  Cretan Mike

  Can someone tell me where I can control the rendering order of the elements within the region of tht compared to the body of the report?

  This is normally controlled by Point of view from the region being one of:

  Body of page template (1. elements located under the content area)
  Body of page template (2 items below the content of the region)
  Body of page template (3 items above content area)

  So you would use Page (3 points above content area) template body to display the items above the body of the report.

  If this does not apply, then it is probably the associated model: details themes and relevant models and/or an example of apex.oracle.com would be useful.

• Question about "Windows 8.1 DG to Windows 7 Pro 64-bit" and Windows product key

  I have acquired a recnet ThinkPad T450 fdrom a retialer online (NCIX) and I hav ea a few questions about the installed Windows operating system.

  Before I just go further, HRE are some information about my particular system.

  Lenovo ThinkPad T450

  Model: 20BV00BUS

  CPU: Intel Core i5-4300U

  RAM: 4 GB

  Under the product description, it was stated "Windows 8.1 DG Windows 7 Pro 64." My understnading, the ThiknPad has been installed with Windows 8.1, but downgraded to Windows 7. There is also a Windows 8 Pro badge sticker at the bottom of the matchine.

  Is it possible, at the end of the user/consumer, to alter the functioning ti repressive back Windows 8.1?

  Can I create a recovery with Windows 8.1 disk?

  A separate but related matter relates to the Windows product key.

  I noticed the Ultrabook do not come with a sticker / label with the Windows product key (i.e. COST). Some quick research indicated that the Windows key is programmed into the BIOS.

  This indeed true (I wish an audit)?

  The key is visible in some way (for when you need to reinstall the operating system. I have not tried to enter the BIOS at the moment)?

  Thank you for taking the time to consider my question.

  Kind regards

  Victor L.

  Hi Victor,

  I'm in the same boat as you type, but want to keep the facilities of Windows 7 rather than pass them to 8. Just like you, I buy our Lenovo from different retailers and they come with windows 7 installed through the Windows 8 lower upgrade program.

  We had one or two laptops come with a recovery media (for windows 8/8.1 only) but have noticed that all laptops now come with no physical media or codes for the recovery. WIN8 stickers, you described is more came with the license key on the sticker (it comes to stop you using the same license again and again, microsoft will get more money if you buy another license etc.). I also saw that the key is essentially located in the BIOS but were not able to test what we use any of windows 8. I use it even at home!

  To answer your question, you can get a recovery of Lenovo for Windows 8 media!

  Go to the following link: https://support.lenovo.com/us/en/lenovorecovery

  (It help you understand why this method is used on this page as well)

  Select Start,

  Please have your serial number of your laptop, (to find it go to this link: https://support.lenovo.com/us/en/find-product-name)

  If you qualify (which you will very probably) Lenovo will ship for free, recovery disks give it a go, took me 2 minutes.

  I hope this helps.

  Best regards, Max.

• Is it a good place to ask questions about the slow s Tablet touchscreen response?

  Is it a good place to ask questions about the slow s Tablet touchscreen response?

  You experience slow response on normal s tablet, the first gen one or the Xperia s tablet, a new.

  If you experience a slow response, it may be because you use too many apps at the time and slowing down of your tablet. How long it lasts?

• Question about importing video footage in Premiere Pro

  I'm new to Premiere Pro and have a question about it. I need to move all my videos on my new computer (Windows) from my old computer (iMac running iMovie). Where should I store my images so I can access inside Premiere Pro? I just need to store everything on a hard drive, and then create inside Premiere Pro projects when I need to import images in, or should I create a 'library' to store all my movies in? Setup bridge would be another beneficial way to view my videos (I use Lightroom for my photo library)? I'm just trying to discern the way I need to store and organize everything in order to get started with Premiere Pro. Thank you!

  Premiere Pro has no capability of database for the media in general, only in a specific project. 'Import' is not like in Lightroom, it does in PrPro is tell her where to look for the media while working on this specific project.

  So... you need create your materials on a particular disc, presented in a way that you can find them in a folder structure you design.

  A typical use of PrPro spreads parts on several disks. OS/programs on the system drive, a disk each cache PrPro & cache of database files; preview files; and project files. Media probably on another drive and exports on a final drive.

  Access the disk cache & cache database files, preview files and project files are the two ways of reading & writing, in addition to being constant. Multimedia files are used unalterable and exports only Scripture, their connections can be a little less robust.

• The specific question about the placement of an image into text.

  Hello, I had a question about the placement of an image into text.

  I did the contours to create text to place the image inside. My text is 5 words and two lines inside the box.

  When I do create contours he gives me 2 transparent route separate layers for the top and the bottom line.

  How will I be able to do that in a single layer of compound to place image that expands to the two lines?

  First of all, there are two ways of describing the type. The default value creates anchored objects. You want a separate object, so hold down the Option/Alt key when you create outlines. Drag the new contours to separate the text block.

  It is useful to open the layers panel and view the contents of the layer. You have created a group which consists of two transparent traces. In the layers panel, expand the layer so you can see the structure. Shift-select the two transparent traces. (Make sure that the group is not selected.)

  

  Then choose object > tracks > make a compound path. This makes the two transparent tracks into one. Then, you can place or paste into the single compound path.

• I have a question about the delivery of the school.  If I start paying $19.99 a few months before that I control, I keep getting this price for the rest of the year?  Or will I stuck having to pay $50.00 per month until the contract is in place?

  I have a question about the delivery of the school for creative cloud.  If I start paying $19.99 a few months before that I control, I keep getting this price for the rest of the year?  Or will I stuck having to pay $50.00 per month until the contract is in place?

  Student discounts are good for a full year, without worrying if you drop out during this period.

  Mylenium

• Question about the charging light on the venue Pro 11 (5130)

  I'm curious... read these discussions in recent weeks... found this work with the Tablet for about 2.5 hours after... I was up to 75% of battery. Connect the tablet to install a software... noticed 75%, not charging. Stop... removed the battery and put it back... He then read 75%, in charge. OK... so what's fixed now... a question about the manual of the system. Said that when the battery is charging, a white light is supposed to be on... where? When that I start, I see a momentary white light at the top of the screen, by the front camera... but when it is plugged and the loading and off... white light no.... No a - I misread? Thank you

  Light (color is white when the load) is located next to the power switch (top, right). Mine re-load very fast.

  White light goes off (or does not) when the Tablet is fully charged (the light on the charger is always on when it is plugged into the outlet)...

• Questions about using HomeScreen.setBackgroundImage, please!

  I am currently make an app when a user presses a button, should change the wallpaper on the homescreen to an image of my application. I know that I need to use HomeScreen.setBackgroundImage (String URL) for this, but I have some questions about its use, that I have not found on the forums of the knowledge base.

  (1) I use PNG images, I realized I may have to change them into JPG, is this true? If it is true, can I just use PNG images in the first place, as in, use them in my application and also as the wallpaper?

  (2) how can I find the URL of the chain of my images, I store them in the folder resource in Eclipse. The URL will be the same for the simulator tests as it will be for the device?

  (3) what I need to make the images of persistent to keep them as a background image or the api will do that automatically whenever I create a new wallpaper?

  I hope that these are simple answers for you pro out there, thanks in advance!

  For anyone who needs help with this topic, the following website has answered most of my questions:

  http://blog.vimviv.com/BlackBerry/display-information-BlackBerry-homescreen/