Place now

Similar Questions

• Satellite M70-187 - recovery made a blunder in place now will not boot

  My Satellite M70 - 187 (PSM 70) has XP on its first Linux and Ubuntu partition on the second, GRUB, Linux boot manager, on the MBR.

  I made a blunder seriously - I just wanted to inspect the contents of the recovery disc, so I booted from it. I was expecting to see some sort of dialogue (he says: 'follow the instructions on the screen' on the disk), but instead apparently he immediately away without asking for any intervention by the user. Firstly, secondly it reversed order on a terminal screen lines, a few seconds later a graphic progress bar is appeared, labeled.

  At this point, I panicked - I had not saved correctly everything, and it looked to me he was already written back his picture over my data. So I hard - power the computer off. On reboot, it wouldn't find his BONES, he had nothing except a blinking cursor. In addition, a Ubuntu Live CD says that it could not mount the hard drive. Then, I stopped to do anything to not make things worse.

  I understand that I can probably easily 'recover' my PC using the recovery again disc, but can I still save my data first? I do not think that he had time to replace the partition data, maybe it only replaced the MBR. But what really that this in the first place, without any dialogue, without asking me? Or it was all well, if only I had been patient for a few seconds? Would it help even if I ran the recovery disc again?

  I understand there is also a recovery console from MS that is included on a CD of Windows and has commands like * fixboot * and * fixmbr * who might or might not be useful, but I realize only now I do not have + have + a Windows CD, given that the recovery disk is anything but that.

  I would really appreciate some help. I'm not at total loss - I have a backup, but as for users more semi experienced, it is neither complete nor perceive...

  I wouldn't change the MBR or any other thing at this point.

  Your best solution would be to connect the HARD drive to another PC and run the recovery software to scan the HARD drive and retrieve your documents.

  Google search for "format data recovery", there are many tools you can try.

• Lollipop place now?

  I just saw an article on Phandroid saying that lollipop now throws at the moto x (2nd generation). Someone at - it there yet? Mine still days (4.4.4) updated.

  
  

• Host drive ran out of place now VMDK needs to be repaired

  Last night, when the process of backup inside my VM launched the host drive ran out of space.

  This morning, the virtual machine has been closed and it won't start.

  I get an error "could not open the disk < the VMDK file name > or one of the snapshot disks it depends on.»

  Reason: the specified virtual disk must be repaired. »

  I've made room on the host drive now, but still, the virtual machine does not boo.t

  I ran vmware - vdiskmanager.exe - R on the vmdk file, but it was impossible to fix.

  I have a few questions:

  1. are there in all cases to repair the virtual machine?

  2. can I go back to the virtual machine to a previous snapshot and apply my backups to be updated?

  3. should I give up the virtual machine and start over? Not pretty, but I can do it.

  I'm under VMare Workstation 7.1.0 build 261024.

  The VM OS is Windows XP SP3

  The host is Windows Vista Business 64.

  Any help or pointers would be great.

  Thank you

  Rick

  In the files in the folder, it seems that your VM was left in a suspended state that now may cause a problem.

  What I would say to do is:

  • Close VMware Workstation or at least the virtual machine to ensure that the files are not in use
  • Edit the vmx file and set ide0:0.fileName = XP_Pro_Test-0-cl2 - 000017.vmdk (already mentioned by Ulli)
  • Delete the following files:
    all the .lck files folders
    VMware-vmx - 904.dmp
    XP_FedComp.vmem
    XP_FedComp.VMSs
    XP_FedComp - Snapshot19.vmsn
    XP_FedComp - Snapshot19.vmem
  • Replace the file vmsd by one attached to this post

  If the virtual machine still does not start, you may need to remove the "XP_FedComp - Snapshot18.vmsn" or "XP_FedComp - Snapshot18.vmem" also. However before you do this, attach the last file vmware.log for us to see exactly what is happening.

  Ounces, that everything is working again, I suggest that you remove some of the snapshots. In VMware products, instantanes snapshots are used in a string your VM which means all THE files are in use and with the number of snapshots, you have, most likely will be much more slowly he could really.

  André

• How to import aol favorite places

  When I'm in firefox and connect you to aol my favorite places now appear.

  If they do not bookmark import > import from another browser in the "Show all bookmarks" Menu it is a tool to convert raw files. Take note that there is also the AOL toolbar and third-party tools are not supported: http://www.linkagogo.net/go/Convert?informat=aol & outformat = netsc...

• 11 7140 pro meeting place cannot activate audio maxx

  Hello

  Got my 11 7140 pro with windows 10 place now. Really happy with the product so far, but I've noticed that I can't activate audio maxx on it. He came up with message 'Maxxaudio supports stereo output only. Please can someone help, because the current volume level is not enough at this point.

  Thank you

  Your system is upgraded from 8.1, or you perform a clean install of win 10?

  The reason why I ask is because I did a clean install, let Windows update capture some pilots he thinks he needs and MaxxAudio works very well.

  Have you tried to uninstall the drivers, reboot and reinstall the drivers?

• Best sites don't update.

  Remove a page top site removes icon altogether instead of suggesting new site in its place (now I have 1.5 lines with sites, and the rest is just empty). Favorites don't seem to update either. After update to Sierra, everything worked fine for a day or two. The only event that I can link to this faulty behavior is installed ublock extension, but remove it did nothing. Any ideas?

  May be a corrupt .plist.

  Make a backup, preferably 2 backups on 2 separate drives.

  Quit the application.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library. Then go to Safari/TopSites.plist.  Move the .plist on your desktop.

  Restart your computer, open the application and test. If it works fine, delete the plist for the office.

  If the application is the same, return the .plist where you got it, crushing the latest.

  Thanks to leonie for certain information contained in this.

• I remember early versions of Firefox had a menu item by which you could share the link to a web page, you have read, what happened?

  I often read web page items that I would like to share with my friends. I think that once there is a menu item that allows you to send the link, using your own e-mail program, to a friend. That happened to her, or well, I remembered it from another browser? Your response is much appreciated.

  You can find it in two places now:

  (1) there is an icon for the function of email link that you can add to a toolbar. It is available in the collection of unused icons when you enter the customization mode. See: Customize Firefox commands, buttons, and toolbars.

  (2) If your toolbars and the menu graphics are already filled, you can use the classic file menu. If you don't regularly display the menu bar, you can press the ALT key, or press F10 to display temporarily. So he's under file > email link.

  If you have not used it for a while, you may need to configure Firefox to work with your favorite e-mail program or your site: change the program used to open links in e-mail. Unfortunately, the webmail configuration may be missing or glitch, so if it doesn't work, please post back on this site mail you try to use any other suggestions.

• Lost or stolen IPAD, I bought today

  Hello all n thank you for your time. bought an IPad from a flea market to set up my Act of iTunes. To post a link iPad for he told me to do a restore. After that, I tried to put in place now, saying that he was bound to find my phone. so my? is - how can I find owner? check and see if it has been lost or stolen. Or I hope that he or she has forgotten to Eraser their info. lol so much for a great buy. Not how I wanted to have my first experience with my first Apple product to go... Thanks again

  It requires the Apple ID and password from the previous owner. If you don't have it and can't get it, then the device is useless to you. Return it for a refund, if you can, or take it to an Apple store for an Exchange, I hope they will help you.

  Find my iPhone Activation Lock

  Check in the future first before you buy second hand: How to check for Activation lock before buying a second hand iPhone.

• Internal FlashBlock is no more? The "ask to activate" no longer works right.

  I moved from FF 22 to the latest version today and one of the few things I don't like is that I have to use Flashblock addon again. 22 FF was an option click to activate plugins. I've tried to set "Ask to activate" in the options of the plugin, but it fails. Once I have activate Flash on a YouTube page, it gets activated for all of the videos that I opened, which makes them autoplay. I see any reason for these changes, because the old system had the ability to set permissions for a site up and had all the advantages of Flashblock addon as well.
  Are there opportunities for the old behavior back? There is a reason, the new behavior, which is pretty much a subset of features old, is in place now?

  Hello GrayFace, the current behavior click-to-play going to white-list plugin content by the same domain during the 60 minutes (this is done to to minimize the distraction for users having to constantly re - allow each page load).

  If you prefer the old behavior, you can use this addon: https://addons.mozilla.org/firefox/addon/click-to-play-per-element

• Airport to Airport utility express extender

  I am a little concerned about what I read, trying to research on this problem. She was told that I could extend my wi - fi with a second Airport Express Terminal. But it will not be displayed in the utility. And I read that it extends only to Apple products? I have a Roku flowing from the base station I currently put in place now, but the signal could be firmer. So, I bought a second Airport Express Terminal. He even appears in the utility when it is connected to 20 feet distance. I can't even ground. I don't know that I'm a fool; what Miss me?

  I was told that I could extend my wi - fi with a second Airport Express

  Don't know what you said, but the Terminal AirPort Express "to extend" wireless if you have another router Apple providing the network that will be expanded. Another way of saying the same thing, it's that if you want to extend the network with an Apple router wireless, you will need at least two of them.

  Apple only allows you to wireless to extend the network once, not two.  In other words, if you already have an AirPort Express set in place for wireless to extend the network, you can not extend it again with another Express that connects to the Express, which already is the extension.

  Now, if you ask if two devices AirPort Express can extend both a network of Apple, the answer would be Yes.  But so that it works, both Express devices must connect directly to the main router Apple, so they would need to be about the same distance from the 'main '... AirPort Base And... the two expresses would need to be closer to the main airport they are to each other.

  For example, you had an airport acting as the "primary" router to the network, and it was located in the middle of your home in rectangular shape.  You might have an express train on the 'left' side of the House to extend the signal in this way and another Express on the 'good' side of the House to extend the network in this way.  The two breaks connects directly to the main router in this type of installation.

  And I read that it extends only to Apple products?

  Yes, you did. It's right there in the product documentation. If you want an express to "extend" the signal, you must have another router Apple providing the network that will be expanded.

  Extend an existing Wi - Fi network.

  If you already have a wireless network in your home and want to extend its range, AirPort Express can help. Just place it in the range of your primary base station - an AirPort Extreme, airport Time Capsule or another Airport Express

  http://www.Apple.com/Airport-Express/

  So, if you could clarify a few things by saying if you have a router from Apple 'major' that provides your network and explain a bit more about what you want to accomplish, we can help.

• Networking with MOCA (Express extreme 2/2)

  So I am using Moca for a while with 1.0 but just had some new 2.0 adapters.  I put them up and while doing this also changed the location of the modem cable main to my office.  I have an airport extreme in my office with the cable modem, one in the living room and two expressed in different rooms in my house to extend the network.

  What I'm not clear on, it is now that I went from the extreme primary to my office. How the one in my living room into place now that the cable modem is not here?  Its always to get a wired connection to Airport extreme Ethernet connected to the adapter of Moca.  Would it not in mode bridge and if she should therefore extend my office network or should I create two new wireless on this one.  Or can I create two new ones with the same name as my existing regular and 5 GHz network?  Or must it be in mode only DHCP instead of bridge?

  I'm very confused and want her to have the connection fastest for devices Wi-wired and connected on.

  So, right now, visually I have:

  Office:

  Cable Modem - Adapter of Moca - Airport Extreme AC - wired devices and wireless devices

  Lounge: (this is my main concern, want to do as quickly as possible and do not know if it should be filled / or where appropriate to new wireless networks)

  Adapter of MOCA - Airport Extreme - wired devices & switch & devices wireless

  Kitchen:

  Airport Express, which runs from Airport Extreme AC at the office

  Solarium:

  Airport Express, which runs from Airport Extreme AC at the office

  Studio:

  Adapter of Mocha - peripheral Wired and wireless devices connected to the Express solarium

  It must be in Bridge mode

  Yes... It is the easiest... Although the static IP address is alternative.

  It should extend my office network or should I create two new wireless on this one.

  You need to create a wireless network... If you try to extend it can be planted throughout the network.

  create two new ones with the same name as my existing regular and 5 GHz network?

  The name can be the same or different from the office... It is entirely up to you.

• Adblock does not work in version 18

  OK, I confess that I was using an older version of Firefox on two machines for a long time. I just got so tired of being told to update every day! On my laptop (version 10) Adblock works very well. On a new machine, I'll put in place now, using version 18, I find that the old Adblock is not available, but he told me to try a newer version. However, this does not work. Is Adblock a thing of the past? I hope not!
  See you soon,.
  Geoff

  Hello Geoff, I have no problems with the latest version of adblock liked and firefox 18.0.1 either... you could specify exactly what does not work?

  Please also note that use outdated versions of firefox is affected by many known security vulnerabilities will put the integrity of your system and personal data thereon to risk!

• Best way to set up multiple iPhones within the family?

  We have 3 iPhones in our family, and we always use the same Apple ID for all three devices.  I understand there was recently some changes to ios, and this strategy may not be the best way to have things to put in place now.  I started seeing a strange behavior between phones, with calls/texts appear on the phones of other people.  Doing some research, it seems that perhaps we should all have separate Apple ID and then go the family share the road, so I was hoping someone could explain clearly how can I do to set this up.

  Right now I have my ID Apple we use for purchases, and it seems that we use an old account @me.com for our iCloud account... which I suppose is what has allowed us to share calendars, see all our devices to find my iPhone, etc.  My ID Apple is not the same as the address of the iCloud account.

  I work in it and myself usually as a guy... pretty strong goal, I will admit that all these Apple and iCloud IDs confuse me... so any help is appreciated.  My main goals here are:

  • Be able to see the locations of all the people of my family
  • Have no other phone calls/texts/etc
  • To share and be aware of purchasing iTunes on all devices
  • I have set up, Music Match on my Apple ID (I think...), so I don't want to lose this functionality across all devices
  • Share a family calendar that we do today (and I hope not to lose what is currently implemented)

  Thanks in advance!

  Add to this... I just looked at the option icloud on my phone and it shows my address @me.com as a principal and an address of @icloud.com as a verified.  My apple account is my gmail address, and my wife and daughter use their gmail as their primary e-mail accounts.

  So I was wondering if I should put in place of the apple for each of them using ID addresses gmail... then we would all have an identifier associated with our gmail addresses apple.  If this is the case, how to set up the account icloud?  I can leave it like that, or should I set up with my gmail account, as my apple ID?

• YouTube xl does not work on Toshiba WL863

  I noticed recently that my youtube in toshiba application places now does not work!
  I thought it would be a software issue, so I checked to see if my software needed an update, but it says that I have no update!

  I liked the youtube app on my tv so please help!

  According to the notice posted on the official website of Toshiba, YouTube XL service was discontinued on June 9, 2013:
  http://www.Toshiba.EU/innovation/generic/YouTube-XL/
  It seems that YouTube XL has been replaced by YouTube Leanback Lite:
  http://www.YouTube.com/leanbacklite
  See also:
  https://support.Google.com/YouTube/answer/3153576#

  If you search for your TV model to the download section of the Firmware here:
  http://www.Toshiba-OM.NET/firmware.php
  you will find that there is a Version of update of the Firmware 19.5.61.15 (as dated 13/6/2013) available for download here:
  http://www.DL.Toshiba.com/TSB-DTV/na/GB/en/42WL863G.html