Host drive ran out of place now VMDK needs to be repaired

Similar Questions

• Local disk C ran out of place?

  Hey everybody

  I just noticed that my C drive is running out of space! 15 GB free out of 111 GB, how is that possible? I barely all installed programs, it is basically just windows, how can she take so much space?

  Would it be a virus or a malicious program that is developing the space? I ran a control anti-virus + anti-maleware tile and both found nothing

  How can I clean and add taken space?

  at this rate I will literally run out of space all the way up to 0

  any help would be appreciated!

  Hello

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Here's how to understand Treesize Screenshots:

  http://www.Jam-software.com/treesize_free/screenshots.shtml

  ____________________________________

  Also check how much space system restore uses:

  http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require

  _____________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  _____________________________________

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And Norton Backup, if you are using Norton, can do strange things with filling of hard drive space.

  See you soon.

• iPhone ran out of battery, now wont start black screen after the apple logo

  Hey not last night, but the night before, I forgot to plug my phone so it died while I was sleeping. When I woke up, I plugged and went a little. When I came back I noticed that the phones screen was on, but black. I tried to restart with the buttons and everything that I do not understand what could be wrong. The battery is not cause fried, it continues to display the apple logo then a black screen. I would prefer not to have my phone back and to lose everything, and I can't really afford to pay someone more than 200 to tell my my phone is broken, please help.

  Have you tried that?

  Try a forced reboot. No data is lost during this procedure. Hold on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen.

• I format an ijnternal HARD drive and reinstalled the OS, now I need a .pst file that has been no backup

  I format windows XP and create the new partition on the HARD drive, then I reinstlled OS, but user not taken backup of .pst files, so now he asked because it is so it is possible to recover the .pst file from the HARD drive.

  Hello Jacqueline.

  You can probably recover some data if you do not have a full format. Search for recovery software after formatting or try a demo of databack link: http://www.runtime.org/data-recovery-software.htm

  Make sure that you do not make new files or download / copy anything on the hard drive to reduce the chances of the excessive write current .pst file.

  -Alex

  I nor Microsoft are responsible for any damage caused by the 3rd party software that you use.

• RN102 ran out of space, restarted unit and is still rising. Help!

  My RN102 ran out of place today so I released about 400 GB. DF h confirmed that I released the space but I was always getting no space left on the device errors. Btrfs showed this:

  Btrfs fi df/data
  Single data: total = 3.62TiB, used = 3.62TiB

  Not knowing that do, I decided to reboot my device, it has been about an hour now and it's still not up to respond to pings. What should I do?

  Well, it took waaay longer than usuall but my NAS is back up now and everything seems fine.

• The standard games on my computer has been deleted and my hard drive went out is there a place I can download the standard games

  original title: games

  The standard games on my computer has been deleted and my hard drive went out is there a place I can download the standard games

  ---------------

• My computer ran out of battery og by practicing a game and now I can play the game

  I played the game and my computer Asus ran out of battery and now I can get into the game, but I can't get to the game side where ist the game loading and then nothing happens. I can press enter the game is shot?

  What can I do about it? Problemsignatur
  Problemhaendelsesnavn: APPCRASH
  Programnavn:Westward_IV.exe
  Programversion:0.0.0.0
  Tidsstempel program: 4b0191c9
  Fejlmodulnavn: Westward_IV.exe
  Fejlmodulversion: 0.0.0.0
  Tidsstempel for fejlmodul: 4b0191c9
  Undtagelseskode: c0000005
  Undtagelsesforskydning: 00332560
  The system version: 6.0.6002.2.2.0.768.3
  Landestandard-id: 1030
  Verder information 1: 3 c 19
  Verder information 2: a54aff084bd449456520e45e3ff5da41
  Verder information 3: e6e5
  Verder information 4: 29792ad77aaf48c26609c1ab7d180d9c

  Hi Shannon,

  Welcome to the Microsoft Answers community.

  This is because the computer was arrested while playing game. The game files might have been corrupted.

  Method 1: The restore of the system on your computer.

  System Restore will take your computer state permeable when it did not face such a problem, this can be done by selecting the correct restore point.
   
  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next.
  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  4. click on finish.

  For more information visit http://support.microsoft.com/kb/936212/

  Method 2: If the same problem then I suggest to uninstall and reinstall the game and check.

  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• my printer ran out of ink and I think it turned its self off, I bought all the ink cartridges new but now

  my computer hp photosmart c5180 all in one, I think that ran out of ink. I received a message that it would be closed if I not fill the cartridges. I think that my grandson he used. now, I went and got all new cartridges and install. but the printer will not return. It's like his dead.any help will be appreciated.

  Try the steps in this troubleshooting page.

• FSX stops with the message "Ran out of available memory...".

  Quad core 2 GB Ram
  NIVIDIA 8800 GT 512 MB
  46 GB of free space on hard drive
  FSX Acceleration Expansion Deluxe

  I have problems with FSX. I installed the module captain sim C-130 and when I fly a long flight I get the message that I ran out of available memory and she stops. I adjusted the virtual memory to 3046 Mo to get an another a/c add on to work properly.  Can I increase it some more and how much?

  Hello MRuggles,

  Thank you for using the Microsoft Windows Vista Forums.

  Sorry, you have a problem with that!  I found some information with different troubleshooting steps.  I have listed below a few out that included the link below.  Please let us know status.  Thank you!

  You receive the error "your computer is running out of memory" message when you start Flight Simulator:
  http://support.Microsoft.com/kb/892610

  When you start Microsoft Flight Simulator, you receive the following error message:

  Your computer is running out of available memory. Flight Simulator will now exit. You can't have enough free space on your hard drive. Run Disk Cleanup to free up space, and then try to run Flight Simulator.

  Method 1: Space available hard drive

  1. Click Startand then click my computer.
  2. Right click on the hard disk where Flight Simulator is installed, and then click Properties.

     Note Flight Simulator is usually installed on the C drive.

  3. Make sure that the amount of free space is more than 500 megabytes (MB).

  Note the 500 MB space available disc is required to play Flight Simulator. 1 gigabyte (GB) of available disk space is recommended. If you do not have at least 500 MB of available hard disk space, you must delete or remove some files or programs on the hard disk.

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion 15-p101nr: 15-p101nr usb host driver

  Hello.

  I deleted hp-version of Windows 8 and installed clear Windows 8.1. I also installed all the drivers for my laptop on your site, but when I tried to plug my card its USB, a PROBLEM that has happened: it reboots once per second. I know this problem, and I guess that's wrong USB host controller drivers. Unfortunately, I couldn't find this driver anywhere in your Web site. Please, help me.

  Best wishes, gaze and others.

  Hello. Thank you for your response.

  Unfortunately, you did not help me. I have macbook - like keyboard and touch pad instead of support apple-like clumsy "OEM ONLY CUZ YOU ARE STUPID".

  I found solution myself. To resolve this problem, you will need to download the drivers from the site Web of AMD:

  http://support.AMD.com/en-us/download/desktop?OS=Windows+8.1+-+64#

  Then, you will need to unzip and install. Not yet the end.

  Open windows, the Device Manager. Search for Universal Serial Bus Controllers > Standard Enhanced PCI to USB Host Controller. Right-click on > Properties > driver > Update Driver. There you have to Browse my computer for driver software > let me pick from a list of devices on my computer > Have Disk > Browse. Now, we go to this folder:

  %folder_of_unpackadge%\AMD-catalyst-Omega-14.12-SB-SATA-AHCI-WIN8.1-Win7\Packages\Drivers\SBDrv\hseries\UsbFilter\W764A
  

  Windows will now detect AMD USB Filter Driver and warn us that this driver may be incompatible with our device. We have to accept and... It fits perfectly. Repeat for other Standard Enhanced PCI to USB Host Controller, and we now have 2 AMD USB Filter Driver instead of them. Now everything works in stone.

  Good job, HP, AMD and Microsoft.

• C: drive turned into raw and now I can't see file display options etc on my computer.

  Original title: instability of the system.

  I have xp s3. I had trouble with my main drive lately. Previously, I had my shot raw c drive and I can either logon in safe mode. I used checkdisk by my slave hard drive someone to another disk and it comes back with a few interface problems. Yet once the obtained c drive turned into raw and now I can't see file display options etc on my computer. I tried to use to start the system restore but not its use before and now. I have avira for antivirus and Registry Mechanic only. Is there a way I can fix my windows without formatting evrything?

  Hi Windflash,

  I had a similar problem also and it turns out that the hard drive is dead. You can probably do is to connect the hard drive to a working another computer & use data recovery tools to recover files from it but usability will always be a question.

  Data recovery is an another stressful job as for me it took 3 days to recover data to a 500 GB drive.

  After which I tried to format it own it but has not as well so I poured the reader.

  You can try my snack suggestions if your drive starts to work again I strictly recommend you to use it as a primary drive.

  Let me know if it helps.

  [If this post was helpful, please click "Yes" under "Was this helpful option?". If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I ran out of key activations on a single computer

  I ran out of key activations on one computer (formatted) several times. How can I get this set limit at level without having to buy a new key.

  I have format on a regular basis to keep the system running clean and fast, I can't afford to buy a new CD key for that microsoft uses to reduce piracy

  First, you must use system, rather than a reinstall images - it's much faster over the long term.

  In the second place - unless you * really * try, it is not easy to run out of activations - but you can use the Activate by phone here on in.

  telephone activation.
  Click the Start button
  in the search box, type
  SLUI 4
  and press the Enter key
  Follow the instructions - but when asked which service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you.

• Here is a list of the driver updates that do not install for one reason or another: Intel Desktop/Workstation/Server Express Chipset SATAAHCI controller your driver is out of date.

  Here is a list of the driver updates that do not install for one reason or another:

  Intel Desktop/Workstation/Server Express Chipset SATAAHCI controller

  Your driver is out of date.

  The installed driver date 30/05/2012

  New driver Date 18/09/2012

  After the next driver update > the following message appears:

  This driver downloaded successfully.

  You want to install it now?

  Yes. Then was the following result:

  Please update your Windows update Agent version.

  You can download the latest version by clicking here.

  If the Microsoft FixIt solution above does not solve your problem.

  Check on the Intel site.

  For example: http://www.intel.com/p/en_US/support/detect

• Dell 2230 Laser Printer sometimes I get this message: host driver printer for 32 bit applications has stopped working.

  Recently, I started using a new computer - a Dell Precision M6700 with Windows 7. Previously, I used a Dell with Windows XP and had no problems with my printer. Now, I have intermittent problems with get this printer to work. Sometimes it works fine, but sometimes, I get this message:

  Host driver printer for 32 bit applications has stopped working. I clicked so he could find a solution online, and it is never able to find one. I just get another message that says:

  An unknown error occurred while printing.

  Problem event name: APPCRASH
  Application name: splwow64.exe
  Application version: 6.1.760.1.17777

  Do you recognize this problem and is there a solution?

  Hello

  I suggest to go through the steps from the link provided and check.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  If the problem persists, you can also run a full scan using the Microsoft Safety Scanner and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  You can also contact Dell to:

  Product support

  http://www.Dell.com/support/troubleshooting/us/en/04/troubleshooting/ProductSelector

  Hope this helps and keep us posted.

• DG, patch out of place

  Hi all

  Instance DG worked fine last week, after a lot of work - yesterday, I apply the patches ('out of place patch', opportunity new oracle home) and log files are not available from primary to standby.

  Copy the copied file orapw listener.ora and tnsnames.ora, update oratab - TNSPing works, "sqlplus sys/pw@stby as sysdba" works both primary and standby

  Read the two pieces of documentation, 278641.1, and 1389364.1, and it seems that I followed all the steps correctly for the upgrade.

  Here is my error logs ('C3P0' is the main "C3P2" standby)

  ------------------------------------------------------------------------------------------------------------- ARC3 trace

  2014-07-15 11:11:38.714

  OCIServerAttach failed-1

  .. OIC val 12154 error and error message is "ORA-12154: TNS: could not resolve the connect identifier specified"

  '

  OCIServerAttach failed-1

  .. OIC val 12154 error and error message is "ORA-12154: TNS: could not resolve the connect identifier specified"

  '

  OCIServerAttach failed-1

  .. OIC val 12154 error and error message is "ORA-12154: TNS: could not resolve the connect identifier specified"

  '

  krsh.c 11:11:38.723 4320 2014-07-15

  Logging of 12154 errors received on the eve

  2014-07-15 11:11:38.723 915 krsu.c

  12154 error connecting to host standby destination LOG_ARCHIVE_DEST_2 "c3p2".

  12154 error attaching to standby host of destination LOG_ARCHIVE_DEST_2 "c3p2".

  krsi.c 11:11:38.724 2961 2014-07-15

  krsi_dst_fail: err dest:2: 12154 explosion of strength: 0:1

  kcrrwkx: unknown error: 12154

  ------------------------------------------------------------------------------------------------------------- alert.log

  Kills Jul 15 11:11:38 2014

  Thread 1 Advanced to record the sequence 114 (switch LGWR)

  Currently Journal # 3 seq # 114 mem # 0: /sw/oradata/C3P0/redo03.log

  Kills Jul 15 11:11:38 2014

  Archived journal 106 additional for each thread 1 113 0x1725a4a9 dest ID sequence entry 1:

  Kills Jul 15 11:11:38 2014

  Logging of 12154 errors received on the eve

  Remove the new logging of errors in LOG_ARCHIVE_DEST_2.

  FAL [server, ARC3]: archive FAL failed, see the trace file.

  ARCH: Archive FAL failed. Continuous archiver

  ORACLE Instance C3P0 - archive error. Continuous archiver.

  Kills Jul 15 11:16:44 2014

  Logging of 12154 errors received on the eve

  Kills Jul 15 11:17:44 2014

  Logging of 12154 errors received on the eve

  Tnsnames and listener values:

  ------------------------------------------------------------------------------------------------------------ tnsnames.ora

  C3P0 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.41.154)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = C3P0)

  )

  )

  C3P2 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.40.82)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = c3p2)

  )

  )

  -----------------------------------------------------------------------------------------------------------------listener.ora

  	(SID_DESC =
  	(GLOBAL_DBNAME = C3P0)
  	(ORACLE_HOME = sw/11.2.0.3.10)
  	(SID_NAME = C3P0)
  	)

  Ok.

  Not what I expected. In view of the ORA-12154 I thought that your/network/admin could have evolved and server didn't have the tnsnames in the right place.

  If you copied the password to the waiting file and renamed him applies properly to try to stop and restart the database on the new password file, and then apply again.

  tnsnames, your alias for listener configuration database name are usually the cause of this error.

  Best regards

  mseberg