Plan rman script in Windows 2003

Similar Questions

• the upgrade of windows 2003 standard edition to enterprise edition

  Hello
  
  Currently, we are conducting 32-bit essbase in windows 2003 standard edition 32 - bit os. We are planning to upgrade to windows 2003 enterprise edition 32-bit os (or) windows 2003 standard edition 64-bit operating system...
  
  so in this scenario
  
  1 > my current essbase applications will have no effect (or). ???
  
  2 > if aplications get impact what could be the possbilities for this scenario...?
  
  Published by: 854925 on April 26, 2011 22:26

  With Essbase you should not all the problems of your switch/bet far Win 2003 Enterprise Edition.

  If you are moving to x 64 Win Server you will probably have to do a full install on a new machine in which case you will just be transfer (.otl) schema files, etc. for the Essbase Essbase Server to the new. So no effect as long as you install more Essbase on x 64 don't box correctly.

• SQL Server 2005 unattended install using the script fails on Windows 2003 Cluster

  We strive to perform the installation without SQL Server 2005 via the script assistance, but the installation fails on Windows 2003 Cluster, we use Windows 2008 with HyperV running a DC with two nodes (all Win 2003). Script is...

  Start/wait setup.exe/qb VS = INSTALLVS SQLTEST = SQL_Engine INSTANCENAME = SQL123 ADDLOCAL = SQL_Engine ADDNODE = sqlnode-1, sqlnode-2 GROUP = SQL1 IP = 192.168.1.85, SQLNetwork ADMINPASSWORD = Windows8! SAPWD = Windows8! INSTALLSQLDIR=%ProgramFiles%\Microsoft SQL Server\ INSTALLSQLDATADIR = G:\SQLDATADIR\ SQLACCOUNT = SQLPASSWORD lab\sql_svc = Windows8! AGTACCOUNT = lab\sql_svc = Windows8 AGTPASSWORD! SQLBROWSERACCOUNT = SQLBROWSERPASSWORD = Windows8 lab\sql_svc! SQLCLUSTERGROUP = "lab\sql_grp" AGTCLUSTERGROUP = "lab\sql_grp" FTSCLUSTERGROUP = "lab\sql_grp" ERRORREPORTING = 1 SQMREPORTING = 1 SQLCOLLATION = SQL_Latin1_General_CP1_CI_AS

  Errors on the nodes:

  SQLSetup0008_SQLNODE1_Core (Local)

   Running: InstallSqlAction to the: 4/14/2012 22:56:39

  Installation: sql on target: SQLNODE1

  Waiting for remote setup (s) to prepare

  Remote Setup (s) is ready

  Problem of determining the State of the virtual server for the package: '1' because of the exception of data store:

  Source the name of the file: datastore\cachedpropertycollection.cpp

  Compiler timestamp: Fri 29 Jul 01:13:49 2005

  Function name: CachedPropertyCollection::findProperty

  The source line number: 63

  ----------------------------------------------------------

  Could not find the property 'VsDataPath' {'PackageIdStateScope', ' ', '1'} in the cache.

  Source the name of the file: datastore\packageidstatescopecollector.cpp

  Compiler timestamp: Wed Aug 24 13:40:04 2005

  Function name: PackageIdStateScopeCollector::collectProperty

  The source line number: 115

  ----------------------------------------------------------

  dataPathValue is empty

  Cluster functionality detected: SQL_Engine

  Loaded DLL:C:\Program SQL Server\90\Setup Bootstrap\sqlsval.dll Version: 2005.90.1399.0

  Source the name of the file: datastore\cachedpropertycollection.cpp

  Compiler timestamp: Fri 29 Jul 01:13:49 2005

  Function name: CachedPropertyCollection::findProperty

  The source line number: 130

  ----------------------------------------------------------

  Unable to find property 'IPResources' {"VirtualServerInfo", "", "SQLTEST"} in the cache

  Source the name of the file: datastore\cachedpropertycollection.cpp

  Compiler timestamp: Fri 29 Jul 01:13:49 2005

  Function name: VirtualServerInfo.IPResources

  The source line number: 113

  ----------------------------------------------------------

  Could not collect the property 'IPResources' {"VirtualServerInfo", "", "SQLTEST"}

  Transact package threw an exception.

  Error code: 0x8007000d (13)

  Windows error text: these data are incorrect.

  Source the name of the file: sqlchaining\highlyavailablepackage.cpp

  Compiler timestamp: Mon Aug 29 01:18:42 2005

  Function name: sqls::HighlyAvailablePackage:manageVsResources

  The source line number: 490

  ---- Context -----------------------------------------------

  SQLs::HighlyAvailablePackage:preInstall

  SQLs::HighlyAvailablePackage:manageVsResources

  m_dataDirPath is empty

  Cluster API threw an exception during operations of virtualization.

  Package first notify: 13

  Error code: 0x8007000d (13)

  Windows error text: these data are incorrect.

  Source the name of the file: sqlchaining\highlyavailablepackage.cpp

  Compiler timestamp: Mon Aug 29 01:18:42 2005

  Function name: sqls::HighlyAvailablePackage:manageVsResources

  The source line number: 490

  ---- Context -----------------------------------------------

  SQLs::HighlyAvailablePackage:preInstall

  SQLs::HighlyAvailablePackage:manageVsResources

  m_dataDirPath is empty

  Cluster API threw an exception during operations of virtualization.

  SQLSetup0008_SQLNODE2_Core (Local)

   

  Local configuration can complement

  Running: InstallSqlAction at: 4/2012/14 23:23:57

  Installation: sql on target: SQLNODE2

  Informs the package is ready to start: 0

  Waiting for notification start installation

  Local configuration can begin installation

  Error code: 0x8007000d (13)

  Windows error text: these data are incorrect.

  Source the name of the file: remotepackageengine\remotepackageinstallersynch.cpp

  Compiler timestamp: Wed Aug 24 13:40:17 2005

  Function name: sqls::RemotePackageInstallerSynch:preInstall

  The source line number: 128

  ---- Context -----------------------------------------------

  SQLs::InstallPackageAction: perform

  SQLs::RemotePackageInstallerSynch:preInstall

  Abandonment of the package: "sql", due to an error from the configuration of the host: 13

  Notify all ready to commit: 13

  Notify all ready to put end to: 13

  Waiting for notification complete installation

  Local configuration can complement

  Packaging return code: 13

  Complete: InstallSqlAction at: 4/2012/14 23:23:59, returned false

  Error: The 'InstallSqlAction' Action failed during execution.  Error during execution information:

  Target collection includes the local machine.

  -----------------------------------------------

  Error: The 'UninstallForRS2000Action' Action failed during execution.  Error during execution information:

  Action: "UninstallForRS2000Action" will be marked as failed due to the following condition:

  The condition 'rs has been correctly upgraded level.' returned false.

  Package installation: 'patchRS2000' failed due to a precondition.

  Running: ReportChainingResults at: 4/2012/14 23:24:1

  Error: Action "ReportChainingResults" threw an exception during execution.

  One or more packages could not be installed. See logs for details of the error. : 13

  Error code: 0x8007000d (13)

  Windows error text: these data are incorrect.

  Source the name of the file: sqlchaining\sqlchainingactions.cpp

  Compiler timestamp: 1 Thu Sep 22:23:05 2005

  Name of the function: sqls::ReportChainingResults: perform

  The source line number: 3097

  Please notify.

  Assani

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

  Hope this information helps.

• Member not found error when trying to add the generic script in the windows 2003 cluster

  I tried to add a generic script in the cluster windows 2003, I've already done a script with the extension .vbs, but when I tried to add the path of the script file its gives me an error indicating that the Member could not be found. Can you help me about this error?

  Hello ishuvbaidhya,

  Your question may be the best answer in the forum TechNet for Windows Server.

  Please transfer your question in forum Windows Server below.
  http://social.technet.Microsoft.com/forums/en-us/winserverManagement/threads

  They will be better able to help with your problem.

  Sincerely,

  Marilyn

• The size of the heap of planning 11.1.1.3 on Windows 2003, tomcat

  Hello
  How can I increase the size of the heap of planning 11.1.1.3 on Windows 2003, tomcat?
  In 9.3.x it used to be at HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions\HyperionPlanning\HyS9Planning
  Search - Is Xmx512m under JVMOption7
  but in 11.x, it's somewhere else.
  Thank you.

  Hello

  It is still under HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions\HyperionPlanning\HyS9Planning in JVMOption9

  If it's 64-bit windows, it is under HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Hyperion Solutions\HyperionPlanning\HyS9Planning

  Ok?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Need help in the migration of windows 2003 server Oracle database server 2012

  Hello

  My environment is oracle database 9i in windows server 2003, we want to move to Windows 2012 since the end of support for windows 2003.

  Please give me a plan, what no need to make the first database upgrade or upgrade of windows, what are the things will have to be considered at the level of Oracle database?

  Any help would be appreciated.

  Thank you

  Lherault

  Hello

  Given the version of your database is 9.2.0.8 and you want to upgrade to 11.2.0.4 and 9i database is running with log mode archive

  I have plan.

  (1) your database 9i working with the log mode archive Server 2003

  (2) you can take backup of Database 9i with RMAN

  (3) you can restore the backup to the base in 2008 (by using 11.2.0.4 software)

  (4) when the recovery is complete, you can open the database with resetlogs option upgrade.

  change the upgrade of open database resetlog.

  (5) once the database is open, you can run 'Upgrade PROCESS'

  (6) it should complete your upgrade in 2008

  If you think, restoration and recovery will take time, so you can install physics Eve with 11.2.0.4 version in 2008 for the Database 9i.

  During failover, you can recreate the controlfile and open the database ' change the upgrade of database open resetlog. "

  you will need to check the compatibility with the help from under documents

  Reference list Oracle database upgrade (Doc ID 730365.1)

  Note 551141.1 : Server Upgrade/Downgrade Compatibility matrix data base

• installation of Windows 2003 server on machine existing windows7

  IAM planning to install Windows 2003 server OS on the machine having windows7
  I would like to have a dual-boot setup where I can start/start any one of the
  operating system and start work
  Please note that I will not disturb existing OS i.e, windows7
  Please suggest...

  Assuming you want to install Windows Server 2003 on an empty hard disk or a partition:

  You can start the installation from the installation of Windows Server 2003 to start media. When you are done, follow the steps in this article to repair the boot sector: Windows startup is no longer after you install an earlier version of the operating system in a dual-boot configuration

  For additional tips for Windows Server, please post in Forum Windows Server.  Thank you!

  Carey Frisch

• Using the Scheduler to run the rman script directly stored in the recovery catalog

  Hi everyone, I usually automate my backups rman, using either cron or dbms_scheduler to call my stored in a sh file NIX rman scripts.  Everything works fine but anyone know how / if it is possible to call a stored in the recovery catalog rman script. Let's say I have create a script in the catalog:

  RMAN > create script showall

  Comment "just one example of demonstration."

  {

  VIEW ALL;

  }

  Can I use dbms_scheduler to call this script directly? If Yes, how and if not then how can we plan for this or a stored script stored in the rman catalog catalog.  Been looking all over the place, but everything seems to indicate leaving Oracle to call .sh or .bat file.

  Kind regards

  Dave

  Well, let us know the result.

  The link you supplied refers to 12 c Scheduler improvements it seems, it may not be applicable to lower versions of Oracle.

• understanding the order of the commands in the RMAN script

  I just started working at a new job and prior s/n had left until I'm there. I'm looking at the RMAN script to back up the database of the single instance 11 GR 2 and I do not understand what is the need of two commands 'backup duplication "? Would it not be prudent to also have a command of "overlap of the archivelog backup all ' as well? In addition, what is the point of having the command "Restore database overview" in the daily backup script?
  
  
  run
  {
  cross-checking of backup;
  retrieve the copy of the database with the tag "ORA OEM_LVL1_ILANDB_PRIM$ ' until ' SYSDATE-1';
  backup incremental level 1 to retrieve the copy with the tag "ORA$ OEM_LVL1_ILANDB_PRIM" database more archivelog delete all entries;
  delete noprompt obsolete;
  Overview of database restore;
  cross-checking of backup;
  }

  Hello again;

  These jump out of me.

  CONFIGURE REDUNDANCY 1 RETENTION STRATEGY; (too low would set to minus 2 and would consider higher)
  CONFIGURE EXCLUDE THEM FOR TABLESPACE "WEBTASK_DATA"; (Consider removing unless you have good reasons for maintaining)
  CONFIGURE THE NONE ARCHIVELOG DELETION POLICY; (Review based on your configuration - for Data Guard may be different)

  STRATEGY OF RETENTION may be based on redundancy or a window of recovery. For redundancy, I like 2 or 3, for recovery window I like 7.

  Best regards

  mseberg

• Windows 2003 comments CustomizeVM_task

  Hello

  I'm trying to customize a windows 2003 guest using the perl API and I get following error:

  SOAP fault:

  -

  ---

  Error string: cannot complete customization.

  Lack of details: CustomizationFault everything to customize for winvm1

  I installed vcenter server on a system running windows 2008 and somehow none of the newspapers last updated it. I was trying to see if the logs contain a detailed error message.

  I have attached the script in case someone wants to take a look.

  Any comments/suggestions would be appreciated.

  OK I see what you're doing, I did not personally this before use case, but he expected to work. This assumes that the guestOS is up and running and you have VMware Tools installed and running?

  Out of curiosity, you copied the way appropriate to the server vCenter under the sysprep directory, your Win2k3 Installer files correct?

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• How VM Windows 2003 can I make it work with the following equipment

  Hi guys,.

  Suppose that I buy the server below. How VM Windows 2003 I can ru without performance issues. With resource allocation obv.

  PowerEdge R610 Rack chassis for up to 6 x 2.5 "hard drives

  |

  Catalogusnummer:	SV4R610REL 282823
  Module	Tricky	ProductCode (verbergen).	SKU (verbergen).	ID (verbergen).
  Base	PowerEdge R610 Rack chassis for up to 6 x 2.5 "hard drives	205064		1
  Additional processor	No additional processor	205078		2
  Geheugen	32 GB memory for 2 CPUs, DDR3 1066 MHz (8X4Go RDIMMS)	205192		3
  Economic stations	16 X DVD +/-RW SATA Drive ROM	205109		16
  Shipping documents	R610 shipping Documents EMEA1 (English/French/German/Spanish/Russian/Hebrew)	205065		21
  Basic warranty	1 jaar basisgarantie - next business day	206049		29
  Ondersteuningsdiensten	Basic 3 year - next business day warranty	206123		30
  Installation services	You have chosen not to take the Dell PowerEdge installation service	76588		32
  Systeembeheer	DVD of the System Documentation and Dell OpenManage electronic for PowerEdge R610	205116

  49

  Rackmontage voor rails

  Not included the racks

  11433

  88

  Order information

  PowerEdge order - Belgium

  32377

  111

  Processor

  Intel® Xeon® E5540, 2.53 Ghz Cache 8 MB, 5.86 GT/s QPI, Turbo, HT, 1066 MHz Max Memory

  205495

  146

  Power cable

  Power cord, PDU (Rack)

  5605

  207

  2nd hard drive

  (4) 300 GB, SAS, 2. 5 - inch, 10 K rpm additional hard drive (Hot Plug)

  205590

  217

  1 RAID - SCSI-controllerkaart

  6iR SAS internal RAID controller card

  212046

  278

  In of fabriek voorgeïnstalleerd besturingssysteem

  Not included

  8007

  285

  OMLIJSTING vooraan

  R610 Rack bezel

  205115

  669

  RAID-connectiviteit

  CFI: RAID 5 + spare. Min 4 HDD

  274642

  1009

  As

  Power output high, not redundant (1 power supply), 717W, BIOS Performance parameter

  205113

  1015

  1 hard drive

  300 GB, SAS, 2. 5 inch, 10 K RPM Hard Drive (Hot Plug)

  205569

  1209

  TCP/IP Offload Engine Enablement

  Ethernet embedded Broadcom Gigabit LOM with TOE 4 p

  77384

  1310

  Serverbeheerkaarten

  iDRAC6 Express Server Management Card

  205619

  1314

  > Why should I the extra CPU?

  UH... because you ask how much Windows 2003 virtual machine, you can run... I GUESS that means more out... That more CPU more the better overall performance of ESX, VM and ESX operating system are designed to work on ALL hearts, so the more hearts of better performance.

  In your config version right now, I wouldn't go above 20 VM.  as you plan to use only 1 hard drive?

  If you use 1 disc, you realize that you have only 1 disc do all the work... right?

• Can I install weblogic32bit on a Windows 2003 R2 64 bit computer?

  To avoid configuration problems 'manully', I want to install weblogic32bit on Windows 2003 R2 64-bit computer, but all other Hyperion - Essbase, APS, ADM, planning, EPMA, shared services, smart view components, work space, etc., are all products of 64-bit. And I hope that when I have set up, I can choose the automatic configuration of the weblogic. Can I do this?

  Hello

  On a windows OS currently EAS is the 64-bit using an application such as weblogic server, I'm sure that we were no longer present, a few times.
  In any case, if you install the 32-bit web logic on a 64-bit computer, you should be ok for autodeploy pieces of 32-bit web app, I've done it before.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Windows 2003 server ASM backup

  Hello
  
  (New in ASM). I want to use ASM to manage the database on a Windows 2003 server. I looked on the information and understand I need to partition disks to raw spaces, name them, and then during the installation of Oracle, I have Oracle get all that disk space.
  
  Now, my question is: what should I use for a backup? RMAN? Export?
  
  Any ideas?
  
  Thank you
  
  VIC

  You can use FRA for RMAN backup. Create a separate FRA diskgroup and store RMAN backups, archivelogs and also flashback logs. If you are able to store your backups in the Storage Manager, you can then run RMAN backups in Storage Manager.

• Hyperion 11.1.3 sustained environment - Windows 2003 64-bit

  We plan our Windows 2003 SP1 32 bit with Hyperion 9.3.1 migration to Windows 2003 64-bit (and whatever the SP is supported) with Hyperion 11.1.3
  
  By examining the oracle support doc that I fell on the exceptions to the use of Windows 64 bit with 11
  
  1. NOT taken in CHARGE FOR: Data Integration Management, reports Teradata Engine Production.
  2 EXCEPTION: Relationship management and FDM data do not support Oracle Access Manager, Oracle Application Server Single Sign-On and Oracle Identity Manager.
  3. 32-BIT BINARY ONLY FOR: data relationship management, EPM Workspace Services, FDM, Financial Reporting Services, Interactive Reporting Services, Shared Services (service native embedded OpenLDAP directory), smart lookup and Strategic Finance.
  4 FDM and strategic Finance cannot be deployed on the same computer where the Performance Management architect (64-bit) and financial management (64 bit) are deployed.
  
  
  I'm more concerned about #3. Does that mean that those services may not run on the 64-bit computer, OR they can run on 64-bit and 32-bit mode only
  
  JTS

  Hello

  This means that they are only binary 32 bits, but they work in a 64-bit environment.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• HP officejet d155xi - need driver for windows 2003

  Hi all

  I need your help.

  I have a hp printer officejet d155xi and need to install it in the Windows 2003 operating system but, unfortunately, theres no driver available for Win 2003.

  Are you able to provide me with that. Your help is really appreciated.

  Thank you

  lgeood03

  This problem is already solved. Simply download the Windows XP driver and it works to Windows 2003. Thank you all...