'Platform' of error service

Similar Questions

• Epson Stylus Photo R300 error - "service required - parts inside your printer are at the end of their service life"

  I have an Epson Stylus Photo R300 and immediately after changing two cartridges of my computer error - service - parts inside your printer are at the end of their life expectancy, and the printer will not respond to the control buttons. I had printed only a test page which was fine, but I can't get rid of this message that stops my printer to work. Help, please!

  The manual for your printer said, "dealer" when you see this error message. This article from Epson (for a different printer model)

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=FAQ&OID=58608&prodoid=53540921&FOID=172781

  indicates that the porus waste pads are at the end of their useful life and you should get replace them and then use the reset utility. It may be cheaper to just buy a new printer, so study the costs before making a decision. I would contact Epson directly for advice.

• I get error Service disabled 0 x 80070422 when you install SP1 on Windows Server 2008 R2 (KB947821)

  original title: I get error Service disabled 0 x 80070422 when you install SP1 on Windows Server 2008 R2

  I get the above error if you use Windows Update or install SP1 from DVD.

  I found that the Windows Modules Installer Service is the service responsible for the error. It is configured to start automatically. When I go to the Dependencies tab I get a pop up that says: "Win32: the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him."
  I disabled AVG during an installation attempt.
  I followed the troubleshooting steps, by running the update of preparation tool (KB947821 nothing helps.

  Hi Roy,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  I hope this helps.

• Service Pack 3 Setup error: "Service Pack 3 Setup cannot update an active (debug) system with a free (retail) version of Service Pack 3, or vice versa"

  Service Pack 3 Setup error: "Service Pack 3 Setup cannot update an active (debug) system with a free (retail) version of Service Pack 3, or vice versa"

  I have XP SP3 download Tuff. I have a Dell Inspiron 16000 w / XP Edition home (version 2002) W / SP 2 is installed.  I couldn't find a reference to the error in line last night.  Can anyone help?

  Turbo Tax 2011 says that I can not download their stuff until I get my XP Stuff to the height.

  Only 6 more days until what the tax man will come :-)...

  Help!

  Put your search inside the quotes term allows when you search for the exact error messages:

  "Service Pack 3 installation cannot update an active (debug) system with a free (retail)"

  The first shot has the answer: http://www.askvg.com/windows-xp-sp3-setup-error-cannot-update-a-checked-debug-system-with-a-free-retail-version-of-service-pack-3/

  CurrentType at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion value should read "Uniprocessor Free" or "free multiprocessor".

  John

• error - services ActiveX one or more controls could not be displayed because that is...

  Original title: error services
  I can't on my firewall
  and I can't even access
  Help, please

  http://3.BP.blogspot.com/-AX8JmL8ZJD0/Ti_u-NG-RHI/AAAAAAAAAEA/9TUi3KU_710/S1600/screen_shot_1%255B3%255d.PNG

  Hi Rahulrahulpz,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you perform the clean boot and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  I hope this helps.

• Error service there is no 0 x 80070424 on Vista 64-bit for the installation of SP2

  Hello

  I use a 64-bit version of Vista SP1. I am trying to install SP2, but in the end, it does not work. I have an error message that Setup could not install and this message: error service there is no 0 x 80070424. I also installed the file: Windows6. 0-KB947821-v4 - x 64 Windows and it I installed an updated but still can't pass under SP2.

  You have a solution?

  Thank you very much for your help!
  JP

  Hello

  read the answer given below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-0x80070424/6511a332-7de3-4F10-B823-49b6dae86b9c

  __________________________________________________________

  If this does not resolve the issue:

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Event ID: 7024 with error message: "the Windows Firewall service stopped with the error service specific data are invalid.

  Original title: cannot start Service Windows Firewall: Error Code 13

  Hello.

  Anyway, the Action Center has begun randomly telling me that the Windows Firewall is disabled. When I try to start or return to the default settings, it tells me that it is not able to do.

  I went to Services and Windows Firewall is set to automatic, but it is not started. I try to start it and it tells me that it is not able to do the same. The error code is 13.

  I am an administrator.

  MalwareBytes did find and delete a virus named "Disable.SecurityCenter", but after removing that I am still unable to start the Service.

  Can someone help with this problem?

  Edit: The journal ID is 7024 and description:

  "The Windows Firewall service stopped with the error service specific data are not valid... '. ».

  Hello, Connor

  You can try to perform a system restore to before that the problem started. For instructions on how to proceed, see the following ink: System Restore: frequently asked questions

  You can also try running a SFC scan to check (and repair) system corrupt/modified files. To do this, go to start, all programs, accessories, click with the right button on command prompt and choose Run as administrator. In the command prompt, type the following command and press ENTER: SFC/scannow

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A system 38 platform-specific error general

  Note: I removed the names of specific server on the balls.

  I worked on a P2V a few days with zero success.  The error I get is: a system general 38 platform-specific error.  If I look in vCenter virtual machine will be created and then deleted in about 20 seconds and failed front of 1%.

  The details of the specific server are:

  Windows Server 2008 x 64.

  VMware Converter Standalone 6.0 (I tried version 5.5.3 and 4.1 and exactly the thing happens)

  The first time that I tried this server to P2V does 80ish % and then rebooted.  Since then I get this failure.  I noticed there are a few old files in the data store vSAN referencing this server so I removed this file that has not solved the problem.

  This area of the paper seems to be the part where it fails:

  2015 05-19 T 11: 21:01.345 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: get the drive virtual filebacking [vsanDatastore] ca545b55-ffc5-354a-c334-fc15b4132df0 / < VMNAME > hard

  2015 05-19 T 11: 21:01.345 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: update port nfc as 902

  2015 05-19 T 11: 21:01.345 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: get the Protocol as vpxa-nfcssl

  2015 05-19 T 11: 21:01.345 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / ca545b55-ffc5-354a-c334-fc15b4132df0 [vsanDatastore] /< VMNAME > hard @ < ESXiHOSTNAME >: 902! A3 52 49 48 4 d 8 d f5 c1 - CF 8 a 14 95 3 b 19 78 3d

  2015 05-19 T 11: 21:03.155 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] 'Insufficient Permission to access file' error (error code: 38) child creation in DiskLib

  2015 05-19 T 11: 21:03.264 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] 'Insufficient Permission to access file' error (error code: 38) child creation in DiskLib

  2015 05-19 T 11: 21:03.264 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = default] 38 error disk vpxa-nfcssl of operation: / / [vsanDatastore] ca545b55-ffc5-354a-c334-fc15b4132df0 / < VMNAME > hard @ < ESXiHOSTNAME >: 902! A3 52 49 48 4 d 8 d f5 c1 - CF 8 a 14 95 3d 3 b 19 78.

  2015 05-19 T 11: 21:03.264 - 04:00 WARNING vmware-converter-worker [05232] [sub Originator@6876 = Default] ERROR 38 opening disk drive-2000.

  2015 05-19 T 11: 21:03.264 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] attempt to open disc drive-2000 new [rest 2] (sleep 5 seconds).

  2015 05-19 T 11: 21:08.272 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task 1] reuse existing connection of VIM to < VCENTERNAME >

  2015 05-19 T 11: 21:08.287 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: get the drive virtual filebacking [vsanDatastore] ca545b55-ffc5-354a-c334-fc15b4132df0 / < VMNAME > hard

  2015 05-19 T 11: 21:08.287 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: update port nfc as 902

  2015 05-19 T 11: 21:08.287 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: get the Protocol as vpxa-nfcssl

  2015 05-19 T 11: 21:08.287 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / ca545b55-ffc5-354a-c334-fc15b4132df0 [vsanDatastore] /< VMNAME > hard @ < ESXiHOSTNAME >: 902! 52 c4 4f 5f 39 0 c c3 12-18 2 b 4 c 44 77 75 63 ad

  2015 05-19 T 11: 21:10.035 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] 'Insufficient Permission to access file' error (error code: 38) child creation in DiskLib

  2015 05-19 T 11: 21:10.159 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] 'Insufficient Permission to access file' error (error code: 38) child creation in DiskLib

  2015 05-19 T 11: 21:10.159 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = default] Error 38 opening disk vpxa-nfcssl: / / ca545b55-ffc5-354a-c334-fc15b4132df0 [vsanDatastore] /< VMNAME > hard @ < ESXiHOSTNAME >: 902! 52 c4 4f 5f 39 0 c c3 12-18 2 b 4 c 44 77 75 63 ad.

  2015 05-19 T 11: 21:10.159 - 04:00 WARNING vmware-converter-worker [05232] [sub Originator@6876 = Default] ERROR 38 opening disk drive-2000.

  2015 05-19 T 11: 21:10.159 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] attempt to open disc drive-2000 new [still 1] (sleep for 10 sec).

  2015 05-19 T 11: 21:20.175 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task 1] reuse existing connection of VIM to < VCENTERNAME >

  2015 05-19 T 11: 21:20.206 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: get the drive virtual filebacking [vsanDatastore] ca545b55-ffc5-354a-c334-fc15b4132df0 / < VMNAME > hard

  2015 05-19 T 11: 21:20.206 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: update port nfc as 902

  2015 05-19 T 11: 21:20.206 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: get the Protocol as vpxa-nfcssl

  2015 05-19 T 11: 21:20.206 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / ca545b55-ffc5-354a-c334-fc15b4132df0 [vsanDatastore] /< VMNAME > hard @ < ESXiHOSTNAME >: 902! 52 71 db 6 c 92 78 8 d bf - b8 f7 f6 88 c8 a0 3 c dc

  2015 05-19 T 11: 21:21.969 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] 'Insufficient Permission to access file' error (error code: 38) child creation in DiskLib

  2015 05-19 T 11: 21:22.093 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] 'Insufficient Permission to access file' error (error code: 38) child creation in DiskLib

  2015 05-19 T 11: 21:22.093 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = default] Error 38 opening disk vpxa-nfcssl: / / ca545b55-ffc5-354a-c334-fc15b4132df0 [vsanDatastore] /< VMNAME > hard @ < ESXiHOSTNAME >: 902! 52 71 db 6 c 92 78 8 d bf - b8 f7 f6 88 c8 a0 3 c dc.

  2015 05-19 T 11: 21:22.093 - 04:00 WARNING vmware-converter-worker [05232] [sub Originator@6876 = Default] ERROR 38 opening disk drive-2000.

  2015 05-19 T 11: 21:22.093 - 04:00 error vmware-converter-worker [05232] [sub Originator@6876 = task-1] [BaseDiskSetComputer::OpenDiskSet] OpenDisks failed, error mntapi: 609

  2015 05-19 T 11: 21:22.093 - 04:00 error vmware-converter-worker [05232] [sub Originator@6876 = task-1] [BaseDiskSetComputer::AnalyzeErrorAndThrow] error is is produced when opening game of diskettes, MNTAPI_ERROR = 609 MNTAPI errorType = 1, errorCode = 38

  2015 05-19 T 11: 21:22.093 - 04:00 error vmware-converter-worker [05232] [sub Originator@6876 = task-1] AnalyzeErrorAndThrow(): not sufficient permissions to open the file

  2015 05-19 T 11: 21:22.093 - 04:00 error vmware-converter-worker [05232] [sub Originator@6876 = task-1] AnalyzeErrorAndThrow(): errorType platform 1, error code 38

  2015 05-19 T 11: 21:22.093 - 04:00 error vmware-converter-worker [05232] [sub Originator@6876 = task-1] TaskImpl failed with std::Exception: 38 platform-specific error

  I was able to determine that the problem was with installing VMware converter on the operating system.  I ended up uninstalling VMware converter and then by searching the registry for all references to VMware, removing those and also remove all remaining files converter in % allusersprofile%\vmware.

  After a reinstall of VMware converter 6.0 machine converted without problem.

• A general error occurred: 18 platform-specific error. Converter 5.5.2 version (1890136)

  Trying P2V of a Win 2008 R2 machine. More great physical disk is 2 TB. Yes dynamic disks. No not the re-sizing, failure to 96 percent after more than 2 days

  Here's what I found in the newspaper worker (attached)

  2014-11 - 02T 20: 34:32.355 - 08:00 [09880 info "task 1" "] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / [DataStore] [MachineName]_3-000002.vmdk@[HostName]:902!52 92 92 fc 65 6a fb b3 - 81 c1 cd f4 83 68 29 a8

  2014-11 - 02T 20: 34:33.652 - 08:00 [09880 WARNING 'Default'] [, 0] NfcFssrvrProcessErrorMsg [NFC ERROR]: server received diskLib 18 error: NfcFssrvrOpen: cannot open '[DataStore] [ComputerName]-000002.vmdk': the virtual disk parent has changed since the child was created. The content of the virtual disk ID parent does not match the corresponding parent

  2014-11 - 02T 20: 34:33.652 - 08:00 [info 09880 "Default"] Sysimgbase_DiskLib_OpenWithPassPhrase failed with ' the virtual disk parent has changed since the child was created. "The content of the virtual disk ID parent does not match the ID of parent matching the child content ' (error code: 18)

  2014-11 - 02T 20: 34:33.652 - 08:00 [info 09880 "Default"] error 18 opening disk vpxa-nfcssl: / / [DataStore] [ComputerName]-000002.vmdk@[HostName]:902!52 fb 2nd fc 73 7f cb 0 a - aa 66 33 4f f4 99 aa d4.

  2014-11 - 02T 20: 34:33.652 - 08:00 [09880 WARNING "Default"] ERROR 18 opening disk vpxa-nfcssl: / / [DataStore] [MachineName]-000002.vmdk@[HostName]:902!52 fb 2nd fc 73 7f cb 0 a - aa 66 33 4f f4 99 aa d4.]

  2014-11 - 02T 20: 34:33.652 - 08:00 [error 09880 ' task-1' '] [BaseDiskSetComputer::DoOpen] OpenDisks failed, error mntapi: 290

  2014-11 - 02T 20: 34:33.652 - 08:00 [09880 error "task 1" "] [BaseDiskSetComputer::AnalyzeErrorAndThrow] error when opening game of diskettes, MNTAPI_ERROR = 290 MNTAPI errorType = 2 errorCode = 18

  2014-11 - 02T 20: 34:33.652 - 08:00 [09880 error "task 1" "] TaskImpl failed with std::Exception: 18 platform-specific error

  2014-11 - 02T 20: 34:33.652 - 08:00 [09880 info "task 1" "] TargetVmManagerImpl::DeleteVM

  Please let me know if you have seen this before? Several beams nothing research

  Forgotten this thread. Answering my own question here.

  A 3rd party backup application was automatically trying to save the newly created virtual computer (& each VM in the environment) which he had just finished.

  We stopped the automatic backup for each VM that enters the environment to avoid this problem in the future.

• The drive stops at 1% with the platform-specific error 2338

  Hello

  I'm P2V a Windows 2003 server in my vCenter environment 5.1.

  Using Converter Standalone version 5.1.0

  All ports is open I firewalls, but still I get this error:

  FAILED: An error occurred during conversion:

  'Platform-specific error 2338'

  I am attaching a logfile here, so if anyone can help to understand what causes the error, I understand that :)

  When you select a host in a DRS cluster automated, it's the vCenter server who makes the decision what ESX host in the cluster to use. If it's a manual DRS or non - DRS cluster, you can select the specific host. The obvious difference of the user, is that in the latter case there is an extra drop-down box for the selection of the host.

  In fact, it's some sort of bug in user experience, because this difference in behavior is not clear. The guide mentions on 49, but we know not to be cut.

  Kind regards

  Plamen

• P2V error: FAILED: an error occurred during conversion: "2338 ' platform-specific error".

  
  Got this message when trying to P2v of Windows 2003 SP2 server on workgroup.   Using the IP address and a local administrator account to connect to the server and the connection to vCenter to add the VM on the host.  The source server is in a workgroup and vCenter server reside in the field, but I can't do a ping from source to vCenter and source of vConverter server and vice versa.   So, doesn't seem to be a firewall issue or the port number.   My account exist on vCenter data center as an administrator, so I should have no problem with permission.

  FAILED: An error occurred during conversion:
  'Platform-specific error 2338'

  Message to: task: Convert physical machine.

  A note more: host of the ESXi 5.0 that I'm trying to place the virtual machine on a double 10G uplinks defined in Full, while the physical server has a 1 G network card.   It is still duplexing of lag, but do not know if it would be a problem here.  Also, am using vCenter Converter standalone ver5.1 to vCenter on ESXi 5.0 5.0 build 1117897.  Configuration standard vSwitch.

  Have tried to locate what means this error and previously paint white.   Any help is appreciated.

  Thank you very much

  I don't know, ports and/or connection settigs could be changed after P2V previsous... check the connection settings, consult the manual.

• Platform-specific error 1867

  Hello

  I'm trying to convert your laptop to a VMware Workstation image and I get the error immediately,

  A general error occurred: platform-specific error 1867.

  I can't find anything on this error online... Anyone seen this before?

  Details of the machine

  Lenovo T420s

  Windows 7 Pro x 64

  VMware Converter 5.1.0 build 1087880

  See you soon

  Peter Sheridan

  
  

  What type of drive is the d: drive? There are a few errors on the D: drive:

  2013-06 - 04T 17: 39:36.079 + 09:30 [02924 error 'Default'] cannot determine the amount of free space to import a location "D:\". »

  ...

  2013-06 - 04T 17: 39:58.166 + 09:30 [info 07796 "Default"] error 1867 opening disk D:\t420s.tsh.local\t420s.tsh.local.vmdk.

  Try to use as destination USB or SMB share.

  HTH

• Fails at 1% with the error "FAILED: an error occurred during conversion:" "2338' platform-specific error".

  I'm trying to convert a physical Windows Server 2003 Web Edition SP2 with converter (v 5.1) and each time it fails with the error "FAILED: an error occurred during conversion:"2338 ' platform-specific error.

  Some errors in the paper seem to point to a hard disk problem but I defragment the disk and then ran a chkdsk and the disk seems good.

  I appreciate all help.

  Your physical machine cannot access ESX:

  2013-05-25 T 11: 07:26.602 - 05:00 [03816 WARNING 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Unable to connect to the server 10.1.2.18:902

  You must allow the connection between the physical machine and ESX @ port 902.

  HTH

• The VMware VirtualCenter Server service stopped with the error service special 2 (0x2).

  I tried all listed in other postings, but our VSphere 4 server resides on a SQL server server.

  I tested the connection odbc with the SA password and it works, it rebooted several times now, tried to stop all services and bringing up one at a time, but whenever a dependency is not. I get this error in the system log, the VMware VirtualCenter Server service stopped with the error service special 2 (0x2).

  And

  VMware VirtualCenter Management Web Services service depends on the VMware VirtualCenter Server service which failed to start because of the following error:

  The service has returned a service-specific error code.

  Application log says this

  The description for event ID 1000 from source VMware VirtualCenter Server can not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  Could not initialize the VMware VirtualCenter. Closing...

  the message resource is present, but the message is not in the string/message table

  I don't know how to fix it. It was working fine yesterday. Nothing has changed. Or has anyone experience this problem and have a solution?

  see if that helps

  http://KB.VMware.com/kb/1015101

• VCenter Server service stopped with the error service special 2 (0x2)

  Hello

  I installed vCenter Server 2.5 5 update on the WIN2003 SP2 server, but after reboot I get this error:

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7024

  Date: 25.09.2009

  Time: 09:19:43

  User: n/a

  Computer: VCSERVER

  Description:

  The VMware VirtualCenter Server service stopped with the error service special 2 (0x2).

  and I can't connect using VMware Infrastructure Client.

  Follow the pdf file and you will be fine.