Platform-specific error 1867

Similar Questions

• A system 38 platform-specific error general

  Note: I removed the names of specific server on the balls.

  I worked on a P2V a few days with zero success.  The error I get is: a system general 38 platform-specific error.  If I look in vCenter virtual machine will be created and then deleted in about 20 seconds and failed front of 1%.

  The details of the specific server are:

  Windows Server 2008 x 64.

  VMware Converter Standalone 6.0 (I tried version 5.5.3 and 4.1 and exactly the thing happens)

  The first time that I tried this server to P2V does 80ish % and then rebooted.  Since then I get this failure.  I noticed there are a few old files in the data store vSAN referencing this server so I removed this file that has not solved the problem.

  This area of the paper seems to be the part where it fails:

  2015 05-19 T 11: 21:01.345 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: get the drive virtual filebacking [vsanDatastore] ca545b55-ffc5-354a-c334-fc15b4132df0 / < VMNAME > hard

  2015 05-19 T 11: 21:01.345 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: update port nfc as 902

  2015 05-19 T 11: 21:01.345 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: get the Protocol as vpxa-nfcssl

  2015 05-19 T 11: 21:01.345 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / ca545b55-ffc5-354a-c334-fc15b4132df0 [vsanDatastore] /< VMNAME > hard @ < ESXiHOSTNAME >: 902! A3 52 49 48 4 d 8 d f5 c1 - CF 8 a 14 95 3 b 19 78 3d

  2015 05-19 T 11: 21:03.155 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] 'Insufficient Permission to access file' error (error code: 38) child creation in DiskLib

  2015 05-19 T 11: 21:03.264 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] 'Insufficient Permission to access file' error (error code: 38) child creation in DiskLib

  2015 05-19 T 11: 21:03.264 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = default] 38 error disk vpxa-nfcssl of operation: / / [vsanDatastore] ca545b55-ffc5-354a-c334-fc15b4132df0 / < VMNAME > hard @ < ESXiHOSTNAME >: 902! A3 52 49 48 4 d 8 d f5 c1 - CF 8 a 14 95 3d 3 b 19 78.

  2015 05-19 T 11: 21:03.264 - 04:00 WARNING vmware-converter-worker [05232] [sub Originator@6876 = Default] ERROR 38 opening disk drive-2000.

  2015 05-19 T 11: 21:03.264 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] attempt to open disc drive-2000 new [rest 2] (sleep 5 seconds).

  2015 05-19 T 11: 21:08.272 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task 1] reuse existing connection of VIM to < VCENTERNAME >

  2015 05-19 T 11: 21:08.287 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: get the drive virtual filebacking [vsanDatastore] ca545b55-ffc5-354a-c334-fc15b4132df0 / < VMNAME > hard

  2015 05-19 T 11: 21:08.287 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: update port nfc as 902

  2015 05-19 T 11: 21:08.287 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: get the Protocol as vpxa-nfcssl

  2015 05-19 T 11: 21:08.287 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / ca545b55-ffc5-354a-c334-fc15b4132df0 [vsanDatastore] /< VMNAME > hard @ < ESXiHOSTNAME >: 902! 52 c4 4f 5f 39 0 c c3 12-18 2 b 4 c 44 77 75 63 ad

  2015 05-19 T 11: 21:10.035 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] 'Insufficient Permission to access file' error (error code: 38) child creation in DiskLib

  2015 05-19 T 11: 21:10.159 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] 'Insufficient Permission to access file' error (error code: 38) child creation in DiskLib

  2015 05-19 T 11: 21:10.159 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = default] Error 38 opening disk vpxa-nfcssl: / / ca545b55-ffc5-354a-c334-fc15b4132df0 [vsanDatastore] /< VMNAME > hard @ < ESXiHOSTNAME >: 902! 52 c4 4f 5f 39 0 c c3 12-18 2 b 4 c 44 77 75 63 ad.

  2015 05-19 T 11: 21:10.159 - 04:00 WARNING vmware-converter-worker [05232] [sub Originator@6876 = Default] ERROR 38 opening disk drive-2000.

  2015 05-19 T 11: 21:10.159 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] attempt to open disc drive-2000 new [still 1] (sleep for 10 sec).

  2015 05-19 T 11: 21:20.175 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task 1] reuse existing connection of VIM to < VCENTERNAME >

  2015 05-19 T 11: 21:20.206 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: get the drive virtual filebacking [vsanDatastore] ca545b55-ffc5-354a-c334-fc15b4132df0 / < VMNAME > hard

  2015 05-19 T 11: 21:20.206 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: update port nfc as 902

  2015 05-19 T 11: 21:20.206 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: get the Protocol as vpxa-nfcssl

  2015 05-19 T 11: 21:20.206 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / ca545b55-ffc5-354a-c334-fc15b4132df0 [vsanDatastore] /< VMNAME > hard @ < ESXiHOSTNAME >: 902! 52 71 db 6 c 92 78 8 d bf - b8 f7 f6 88 c8 a0 3 c dc

  2015 05-19 T 11: 21:21.969 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] 'Insufficient Permission to access file' error (error code: 38) child creation in DiskLib

  2015 05-19 T 11: 21:22.093 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] 'Insufficient Permission to access file' error (error code: 38) child creation in DiskLib

  2015 05-19 T 11: 21:22.093 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = default] Error 38 opening disk vpxa-nfcssl: / / ca545b55-ffc5-354a-c334-fc15b4132df0 [vsanDatastore] /< VMNAME > hard @ < ESXiHOSTNAME >: 902! 52 71 db 6 c 92 78 8 d bf - b8 f7 f6 88 c8 a0 3 c dc.

  2015 05-19 T 11: 21:22.093 - 04:00 WARNING vmware-converter-worker [05232] [sub Originator@6876 = Default] ERROR 38 opening disk drive-2000.

  2015 05-19 T 11: 21:22.093 - 04:00 error vmware-converter-worker [05232] [sub Originator@6876 = task-1] [BaseDiskSetComputer::OpenDiskSet] OpenDisks failed, error mntapi: 609

  2015 05-19 T 11: 21:22.093 - 04:00 error vmware-converter-worker [05232] [sub Originator@6876 = task-1] [BaseDiskSetComputer::AnalyzeErrorAndThrow] error is is produced when opening game of diskettes, MNTAPI_ERROR = 609 MNTAPI errorType = 1, errorCode = 38

  2015 05-19 T 11: 21:22.093 - 04:00 error vmware-converter-worker [05232] [sub Originator@6876 = task-1] AnalyzeErrorAndThrow(): not sufficient permissions to open the file

  2015 05-19 T 11: 21:22.093 - 04:00 error vmware-converter-worker [05232] [sub Originator@6876 = task-1] AnalyzeErrorAndThrow(): errorType platform 1, error code 38

  2015 05-19 T 11: 21:22.093 - 04:00 error vmware-converter-worker [05232] [sub Originator@6876 = task-1] TaskImpl failed with std::Exception: 38 platform-specific error

  I was able to determine that the problem was with installing VMware converter on the operating system.  I ended up uninstalling VMware converter and then by searching the registry for all references to VMware, removing those and also remove all remaining files converter in % allusersprofile%\vmware.

  After a reinstall of VMware converter 6.0 machine converted without problem.

• A general error occurred: 18 platform-specific error. Converter 5.5.2 version (1890136)

  Trying P2V of a Win 2008 R2 machine. More great physical disk is 2 TB. Yes dynamic disks. No not the re-sizing, failure to 96 percent after more than 2 days

  Here's what I found in the newspaper worker (attached)

  2014-11 - 02T 20: 34:32.355 - 08:00 [09880 info "task 1" "] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / [DataStore] [MachineName]_3-000002.vmdk@[HostName]:902!52 92 92 fc 65 6a fb b3 - 81 c1 cd f4 83 68 29 a8

  2014-11 - 02T 20: 34:33.652 - 08:00 [09880 WARNING 'Default'] [, 0] NfcFssrvrProcessErrorMsg [NFC ERROR]: server received diskLib 18 error: NfcFssrvrOpen: cannot open '[DataStore] [ComputerName]-000002.vmdk': the virtual disk parent has changed since the child was created. The content of the virtual disk ID parent does not match the corresponding parent

  2014-11 - 02T 20: 34:33.652 - 08:00 [info 09880 "Default"] Sysimgbase_DiskLib_OpenWithPassPhrase failed with ' the virtual disk parent has changed since the child was created. "The content of the virtual disk ID parent does not match the ID of parent matching the child content ' (error code: 18)

  2014-11 - 02T 20: 34:33.652 - 08:00 [info 09880 "Default"] error 18 opening disk vpxa-nfcssl: / / [DataStore] [ComputerName]-000002.vmdk@[HostName]:902!52 fb 2nd fc 73 7f cb 0 a - aa 66 33 4f f4 99 aa d4.

  2014-11 - 02T 20: 34:33.652 - 08:00 [09880 WARNING "Default"] ERROR 18 opening disk vpxa-nfcssl: / / [DataStore] [MachineName]-000002.vmdk@[HostName]:902!52 fb 2nd fc 73 7f cb 0 a - aa 66 33 4f f4 99 aa d4.]

  2014-11 - 02T 20: 34:33.652 - 08:00 [error 09880 ' task-1' '] [BaseDiskSetComputer::DoOpen] OpenDisks failed, error mntapi: 290

  2014-11 - 02T 20: 34:33.652 - 08:00 [09880 error "task 1" "] [BaseDiskSetComputer::AnalyzeErrorAndThrow] error when opening game of diskettes, MNTAPI_ERROR = 290 MNTAPI errorType = 2 errorCode = 18

  2014-11 - 02T 20: 34:33.652 - 08:00 [09880 error "task 1" "] TaskImpl failed with std::Exception: 18 platform-specific error

  2014-11 - 02T 20: 34:33.652 - 08:00 [09880 info "task 1" "] TargetVmManagerImpl::DeleteVM

  Please let me know if you have seen this before? Several beams nothing research

  Forgotten this thread. Answering my own question here.

  A 3rd party backup application was automatically trying to save the newly created virtual computer (& each VM in the environment) which he had just finished.

  We stopped the automatic backup for each VM that enters the environment to avoid this problem in the future.

• The drive stops at 1% with the platform-specific error 2338

  Hello

  I'm P2V a Windows 2003 server in my vCenter environment 5.1.

  Using Converter Standalone version 5.1.0

  All ports is open I firewalls, but still I get this error:

  FAILED: An error occurred during conversion:

  'Platform-specific error 2338'

  I am attaching a logfile here, so if anyone can help to understand what causes the error, I understand that :)

  When you select a host in a DRS cluster automated, it's the vCenter server who makes the decision what ESX host in the cluster to use. If it's a manual DRS or non - DRS cluster, you can select the specific host. The obvious difference of the user, is that in the latter case there is an extra drop-down box for the selection of the host.

  In fact, it's some sort of bug in user experience, because this difference in behavior is not clear. The guide mentions on 49, but we know not to be cut.

  Kind regards

  Plamen

• P2V error: FAILED: an error occurred during conversion: "2338 ' platform-specific error".

  
  Got this message when trying to P2v of Windows 2003 SP2 server on workgroup.   Using the IP address and a local administrator account to connect to the server and the connection to vCenter to add the VM on the host.  The source server is in a workgroup and vCenter server reside in the field, but I can't do a ping from source to vCenter and source of vConverter server and vice versa.   So, doesn't seem to be a firewall issue or the port number.   My account exist on vCenter data center as an administrator, so I should have no problem with permission.

  FAILED: An error occurred during conversion:
  'Platform-specific error 2338'

  Message to: task: Convert physical machine.

  A note more: host of the ESXi 5.0 that I'm trying to place the virtual machine on a double 10G uplinks defined in Full, while the physical server has a 1 G network card.   It is still duplexing of lag, but do not know if it would be a problem here.  Also, am using vCenter Converter standalone ver5.1 to vCenter on ESXi 5.0 5.0 build 1117897.  Configuration standard vSwitch.

  Have tried to locate what means this error and previously paint white.   Any help is appreciated.

  Thank you very much

  I don't know, ports and/or connection settigs could be changed after P2V previsous... check the connection settings, consult the manual.

• Fails at 1% with the error "FAILED: an error occurred during conversion:" "2338' platform-specific error".

  I'm trying to convert a physical Windows Server 2003 Web Edition SP2 with converter (v 5.1) and each time it fails with the error "FAILED: an error occurred during conversion:"2338 ' platform-specific error.

  Some errors in the paper seem to point to a hard disk problem but I defragment the disk and then ran a chkdsk and the disk seems good.

  I appreciate all help.

  Your physical machine cannot access ESX:

  2013-05-25 T 11: 07:26.602 - 05:00 [03816 WARNING 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Unable to connect to the server 10.1.2.18:902

  You must allow the connection between the physical machine and ESX @ port 902.

  HTH

• I often get frequent blue screens on internet sites. Blue screen too fast for me to record specific error message. How can I put an end to the blue screen to get the error message?

  frequent blue screens often to internet sites.  Blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  en blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  If your computer is restarted when the BSOD appears, then you must change the by default for what to do in case of system error. It is easy to do, but takes a lot of mouse clicks to get there:

  Start | Control Panel | System | Advanced system settings (need for credentials for the administrator to spend here |) Advanced | Startup and recovery / settings.

  On this screen, uncheck the box under system failure that says automatically restart. The next time the BSOD appears, your computer will not do anything else until you press the reset button, so you'll have all the time you need to read and copy the error codes. Paste here, verbatim, and someone should be able to point in the right direction.

  ``````~~~~`````

  In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

  In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

  It may be useful to eliminate equipment defects

  Type of memory in the search box of start and choose Memory diagnosis

  In a command prompt (type command in the start search box then right click and choose Run as administrator) type

  CHKDSK c: /r

  If you have more than one drive replace C: with the other drive letters.

  Search for corrupted files by typing at the command prompt

  sfc/scannow

  You can clean boot troubleshooting http://support.microsoft.com/kb/331796

• When you try to schedule a task in XP, make a mistake "the new task could not be created the specific error is 0x80070005: access is denied."

  My

  System Type X 86-based PC
  Processor x 86 Family 6 Model 23 Stepping 10 GenuineIntel ~ 3324 Mhz
  A05 BIOS Version/Date Dell Inc., 07-31-2009
  SMBIOS 2.5 version

  I'm trying to schedule a new task I get this error

  The new task could not be created specific error is 0x80070005: access is denied

  I am an administrator for this computer and I am connected to the office network.

  I downloaded a patch KB904423, but it tells me that the installer has detected that the SP of the system version is newer the updte I am applying, I did not need to install this update

  Is there any fix for this?

  Thank you

  Hi dgxp64,

  ·         The computer is on a domain network?

  Method 1: Temporarily disable the antivirus on the computer program and check if it helps. If it works, you may need to check the settings of the program.

  Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

  Method 2: Check to see if this article helps you.

  How to solve the scheduled tasks in Windows XP and Windows Server 2003

  Method 3: We will grant permission for the C:\Users folder and check if it helps.

  How to set, view, change, or remove special permissions for files and folders in Windows XP

  If the computer is on a domain network you can post your query on the TechNet Forums.

  Windows XP IT Pro category

• Specific error of connector for blackBerry Smartphones

  Just upgraded to Curve 9360. Now, when I synch I get an error when it tries to sync the calendar: connector specific error. No other information. It is the synchronization log:

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  22/04/2012 09:23
  Synchronize the device calendar with Microsoft Outlook calendar

  First system: device
  Second system: Microsoft Outlook
  Second file system name: calendar
  Conflict resolution: notify
  Beach of appointment: 04 22, 2012 at 12/31/3099
  Device data source: «BlackBerry calendar»

  --> Records duplicate found!

  Total of the entries of the first system: 0

  Used for the translation field mapping:
  Device Microsoft Outlook
  Description title - subject
  Notes - body
  -Place
  Alarm Date - Date alarm
  Time alarm - the alarm time
  Start date - Date of start
  Start - Start time
  End date - End Date
  End time - end time
  Alarm indicator - Set Reminder indicator
  Free availability - time to see the like
  Participants - the meeting
  Private - private

  Internal error.
  Cancelled translation!

  There is nothing in Event Viewer to suggest what is the problem. I tried to uninstall all Blackberry software by downloading and installing the latest version of the software as an administrator. Can anyone suggest anything else I can try?

  He solved. Go to desktop, device, delete data. Delete everything to do with the calendar. Check your synchronization copy of the Outlook on the device. It synch. All sorted.

  I hope that anyone else who saves the two hours it took me to find!

• BlackBerry smartphones receiving "connector specific error" when you try to synchronize 8310 w / Desktop Manager

  I've had my phone for over a year and never had any problems until this morning in Sync Center (when he was trying to read the contents of my calendar of the device), he shut it down and said "Connector specific error" and the synchronization ends. I tried to update my software to the latest version, because I was using 4.5, but even after I removed the 4.5 and installed to 4.7, I got the same error.

  Help!

  Joe

  EDIT: Remove personal information

  According to this article, one of the databases (calendar, address book, tasks, Notepad) is synchronized got corrupted.

  http://www.BlackBerry.com/BTSC/KB15294

  That is it stops on the synchronization?

  You'll probably end up deleting the database. First, use the backup and restore utility to perform a full backup of your data. Then, go to the backup and restore | Advanced. Select the database is damaged on the right side and press the Clear button. In doing so, you clear all the entries in this database.

  Try to make a synchronization later and see if it goes through okay.

• BlackBerry Smartphones connector specific error when sync with Outlook calendar

  Installed Outlook2007.  Address, tasks, and notes will be synchronize everything with my BB 8830.  However, the calendar gives me an error message;  "Connector specific error" after reading the calendar of my camera.  The entire synchronization process stops.  When I uncheck the 'calendar', then the rest of the shares will be synced to the top.  Any ideas?

  Hi and welcome to the forums!

  Here is an article on how to solve the problem.

  Thank you

  Bifocals

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB15294&sliceId=SAL_Pub...

• BlackBerry Storm 9530 smartphones. Had "the connector-specific error" when synchronize with outlook.

  Hello world.

  I just updated my storm 9530 with the ver.5.0 and has since got this version I'm not able to sync with my outlook 2003. Always got this message in french "Connector specific error" which means "the connector-specific error. Anyone ever had this problem. If so, how can I solve this problem. Thank you. Michel... Sorry for my English...

  Hi and welcome to the Forums!

  I think that the translation may be different... see if this KB applies to what you are requiring:

  • KB15294 "Connector specific error" when syncing with BlackBerry Desktop Software

  See you soon!

• BlackBerry Smartphones connector specific error Intellisync / Internal Error #4238

  Hello everyone.  I got my phone from Blackberry storm about 2 weeks ago and it worked perfectly.  I could back up my files and synchronize my Contacts from the Windows address book.  I had 68 Contacts inside and today I added 5 more to make 73.  I went to sync the phone and just as he was on sync contacts, I have a message "the Intellisync connector specific error."  I then checked the logs, and on the bottom of the log, it says "Internal Error #4238".

  I deleted and reinstalled the Blackberry Desktop Manager and reset my computer and phone several times.  I also wne in the section advanced and deleted contacts from your phone and tried to reinstall the and installed only 44 of them and got the same message "the Intellisync connector specific error."  I was on the phone with Verizon for an hour and they could not help.

  I am running Windows Vista.  Any help appreciated.

  I tried that suggested bifocals, and for some reason, I couldn't understand it.  So what I did I e-mailed me contacts, 15 at a time and it worked perfectly.  Prior to sending contacts, I just had to be converted to .vcf files.

• The blackBerry Smartphones connector specific error

  I'm having a problem to sync my address book phone with my outlook address book.  Get the connector specific error need help

  Hello

  We have problems of link:

• Exit code: 7 please see specific errors below for troubleshooting.

  Hello

  I have great difficulty installation fuse CC, crashes at 84% with the following error:

  Exit code: 7

  Please see specific errors below for troubleshooting. For example, ERROR: DF024...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 1 Error (s)

  -Payload: fuse CC (Preview) 1.0.0.0 {06F1F289-ACFE-43A2-A654-7950079D6685}.

  ERROR: DF024: cannot move the file to 'C:\Program Files\Common Files\Adobe\Installers\adobeTemp\ {06F1F289-ACFE-43A2-A654-7950079D6685} \_16_714fd7691ec95 3bccd245f8d22dc9d09' to 'C:\Program Files\Adobe\Adobe fuse CC (Preview)\Code\Build\Output\Fuse\bin\Release\Qt3Support4.dll' error 32 the process cannot access the file because it is being used by another process... Try setting the correct permissions for the specified file/folder or parent, so that the admin has the right to modify. (4747 Seq)

  I uninstalled 5 times now, every time that you use the vacuum cleaner but it will not install...

  I'm at a loss what to try next...

  Alan

  -------------------------------------------------------------------------------------

  https://helpx.Adobe.com/Creative-Suite/KB/error-exit-6-exit-7.html