The drive stops at 1% with the platform-specific error 2338

Similar Questions

• P2V error: FAILED: an error occurred during conversion: "2338 ' platform-specific error".

  
  Got this message when trying to P2v of Windows 2003 SP2 server on workgroup.   Using the IP address and a local administrator account to connect to the server and the connection to vCenter to add the VM on the host.  The source server is in a workgroup and vCenter server reside in the field, but I can't do a ping from source to vCenter and source of vConverter server and vice versa.   So, doesn't seem to be a firewall issue or the port number.   My account exist on vCenter data center as an administrator, so I should have no problem with permission.

  FAILED: An error occurred during conversion:
  'Platform-specific error 2338'

  Message to: task: Convert physical machine.

  A note more: host of the ESXi 5.0 that I'm trying to place the virtual machine on a double 10G uplinks defined in Full, while the physical server has a 1 G network card.   It is still duplexing of lag, but do not know if it would be a problem here.  Also, am using vCenter Converter standalone ver5.1 to vCenter on ESXi 5.0 5.0 build 1117897.  Configuration standard vSwitch.

  Have tried to locate what means this error and previously paint white.   Any help is appreciated.

  Thank you very much

  I don't know, ports and/or connection settigs could be changed after P2V previsous... check the connection settings, consult the manual.

• Fails at 1% with the error "FAILED: an error occurred during conversion:" "2338' platform-specific error".

  I'm trying to convert a physical Windows Server 2003 Web Edition SP2 with converter (v 5.1) and each time it fails with the error "FAILED: an error occurred during conversion:"2338 ' platform-specific error.

  Some errors in the paper seem to point to a hard disk problem but I defragment the disk and then ran a chkdsk and the disk seems good.

  I appreciate all help.

  Your physical machine cannot access ESX:

  2013-05-25 T 11: 07:26.602 - 05:00 [03816 WARNING 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Unable to connect to the server 10.1.2.18:902

  You must allow the connection between the physical machine and ESX @ port 902.

  HTH

• BlackBerry Storm 9530 smartphones. Had "the connector-specific error" when synchronize with outlook.

  Hello world.

  I just updated my storm 9530 with the ver.5.0 and has since got this version I'm not able to sync with my outlook 2003. Always got this message in french "Connector specific error" which means "the connector-specific error. Anyone ever had this problem. If so, how can I solve this problem. Thank you. Michel... Sorry for my English...

  Hi and welcome to the Forums!

  I think that the translation may be different... see if this KB applies to what you are requiring:

  • KB15294 "Connector specific error" when syncing with BlackBerry Desktop Software

  See you soon!

• A system 38 platform-specific error general

  Note: I removed the names of specific server on the balls.

  I worked on a P2V a few days with zero success.  The error I get is: a system general 38 platform-specific error.  If I look in vCenter virtual machine will be created and then deleted in about 20 seconds and failed front of 1%.

  The details of the specific server are:

  Windows Server 2008 x 64.

  VMware Converter Standalone 6.0 (I tried version 5.5.3 and 4.1 and exactly the thing happens)

  The first time that I tried this server to P2V does 80ish % and then rebooted.  Since then I get this failure.  I noticed there are a few old files in the data store vSAN referencing this server so I removed this file that has not solved the problem.

  This area of the paper seems to be the part where it fails:

  2015 05-19 T 11: 21:01.345 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: get the drive virtual filebacking [vsanDatastore] ca545b55-ffc5-354a-c334-fc15b4132df0 / < VMNAME > hard

  2015 05-19 T 11: 21:01.345 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: update port nfc as 902

  2015 05-19 T 11: 21:01.345 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: get the Protocol as vpxa-nfcssl

  2015 05-19 T 11: 21:01.345 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / ca545b55-ffc5-354a-c334-fc15b4132df0 [vsanDatastore] /< VMNAME > hard @ < ESXiHOSTNAME >: 902! A3 52 49 48 4 d 8 d f5 c1 - CF 8 a 14 95 3 b 19 78 3d

  2015 05-19 T 11: 21:03.155 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] 'Insufficient Permission to access file' error (error code: 38) child creation in DiskLib

  2015 05-19 T 11: 21:03.264 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] 'Insufficient Permission to access file' error (error code: 38) child creation in DiskLib

  2015 05-19 T 11: 21:03.264 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = default] 38 error disk vpxa-nfcssl of operation: / / [vsanDatastore] ca545b55-ffc5-354a-c334-fc15b4132df0 / < VMNAME > hard @ < ESXiHOSTNAME >: 902! A3 52 49 48 4 d 8 d f5 c1 - CF 8 a 14 95 3d 3 b 19 78.

  2015 05-19 T 11: 21:03.264 - 04:00 WARNING vmware-converter-worker [05232] [sub Originator@6876 = Default] ERROR 38 opening disk drive-2000.

  2015 05-19 T 11: 21:03.264 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] attempt to open disc drive-2000 new [rest 2] (sleep 5 seconds).

  2015 05-19 T 11: 21:08.272 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task 1] reuse existing connection of VIM to < VCENTERNAME >

  2015 05-19 T 11: 21:08.287 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: get the drive virtual filebacking [vsanDatastore] ca545b55-ffc5-354a-c334-fc15b4132df0 / < VMNAME > hard

  2015 05-19 T 11: 21:08.287 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: update port nfc as 902

  2015 05-19 T 11: 21:08.287 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: get the Protocol as vpxa-nfcssl

  2015 05-19 T 11: 21:08.287 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / ca545b55-ffc5-354a-c334-fc15b4132df0 [vsanDatastore] /< VMNAME > hard @ < ESXiHOSTNAME >: 902! 52 c4 4f 5f 39 0 c c3 12-18 2 b 4 c 44 77 75 63 ad

  2015 05-19 T 11: 21:10.035 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] 'Insufficient Permission to access file' error (error code: 38) child creation in DiskLib

  2015 05-19 T 11: 21:10.159 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] 'Insufficient Permission to access file' error (error code: 38) child creation in DiskLib

  2015 05-19 T 11: 21:10.159 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = default] Error 38 opening disk vpxa-nfcssl: / / ca545b55-ffc5-354a-c334-fc15b4132df0 [vsanDatastore] /< VMNAME > hard @ < ESXiHOSTNAME >: 902! 52 c4 4f 5f 39 0 c c3 12-18 2 b 4 c 44 77 75 63 ad.

  2015 05-19 T 11: 21:10.159 - 04:00 WARNING vmware-converter-worker [05232] [sub Originator@6876 = Default] ERROR 38 opening disk drive-2000.

  2015 05-19 T 11: 21:10.159 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] attempt to open disc drive-2000 new [still 1] (sleep for 10 sec).

  2015 05-19 T 11: 21:20.175 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task 1] reuse existing connection of VIM to < VCENTERNAME >

  2015 05-19 T 11: 21:20.206 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: get the drive virtual filebacking [vsanDatastore] ca545b55-ffc5-354a-c334-fc15b4132df0 / < VMNAME > hard

  2015 05-19 T 11: 21:20.206 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: update port nfc as 902

  2015 05-19 T 11: 21:20.206 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: get the Protocol as vpxa-nfcssl

  2015 05-19 T 11: 21:20.206 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / ca545b55-ffc5-354a-c334-fc15b4132df0 [vsanDatastore] /< VMNAME > hard @ < ESXiHOSTNAME >: 902! 52 71 db 6 c 92 78 8 d bf - b8 f7 f6 88 c8 a0 3 c dc

  2015 05-19 T 11: 21:21.969 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] 'Insufficient Permission to access file' error (error code: 38) child creation in DiskLib

  2015 05-19 T 11: 21:22.093 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] 'Insufficient Permission to access file' error (error code: 38) child creation in DiskLib

  2015 05-19 T 11: 21:22.093 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = default] Error 38 opening disk vpxa-nfcssl: / / ca545b55-ffc5-354a-c334-fc15b4132df0 [vsanDatastore] /< VMNAME > hard @ < ESXiHOSTNAME >: 902! 52 71 db 6 c 92 78 8 d bf - b8 f7 f6 88 c8 a0 3 c dc.

  2015 05-19 T 11: 21:22.093 - 04:00 WARNING vmware-converter-worker [05232] [sub Originator@6876 = Default] ERROR 38 opening disk drive-2000.

  2015 05-19 T 11: 21:22.093 - 04:00 error vmware-converter-worker [05232] [sub Originator@6876 = task-1] [BaseDiskSetComputer::OpenDiskSet] OpenDisks failed, error mntapi: 609

  2015 05-19 T 11: 21:22.093 - 04:00 error vmware-converter-worker [05232] [sub Originator@6876 = task-1] [BaseDiskSetComputer::AnalyzeErrorAndThrow] error is is produced when opening game of diskettes, MNTAPI_ERROR = 609 MNTAPI errorType = 1, errorCode = 38

  2015 05-19 T 11: 21:22.093 - 04:00 error vmware-converter-worker [05232] [sub Originator@6876 = task-1] AnalyzeErrorAndThrow(): not sufficient permissions to open the file

  2015 05-19 T 11: 21:22.093 - 04:00 error vmware-converter-worker [05232] [sub Originator@6876 = task-1] AnalyzeErrorAndThrow(): errorType platform 1, error code 38

  2015 05-19 T 11: 21:22.093 - 04:00 error vmware-converter-worker [05232] [sub Originator@6876 = task-1] TaskImpl failed with std::Exception: 38 platform-specific error

  I was able to determine that the problem was with installing VMware converter on the operating system.  I ended up uninstalling VMware converter and then by searching the registry for all references to VMware, removing those and also remove all remaining files converter in % allusersprofile%\vmware.

  After a reinstall of VMware converter 6.0 machine converted without problem.

• A general error occurred: 18 platform-specific error. Converter 5.5.2 version (1890136)

  Trying P2V of a Win 2008 R2 machine. More great physical disk is 2 TB. Yes dynamic disks. No not the re-sizing, failure to 96 percent after more than 2 days

  Here's what I found in the newspaper worker (attached)

  2014-11 - 02T 20: 34:32.355 - 08:00 [09880 info "task 1" "] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / [DataStore] [MachineName]_3-000002.vmdk@[HostName]:902!52 92 92 fc 65 6a fb b3 - 81 c1 cd f4 83 68 29 a8

  2014-11 - 02T 20: 34:33.652 - 08:00 [09880 WARNING 'Default'] [, 0] NfcFssrvrProcessErrorMsg [NFC ERROR]: server received diskLib 18 error: NfcFssrvrOpen: cannot open '[DataStore] [ComputerName]-000002.vmdk': the virtual disk parent has changed since the child was created. The content of the virtual disk ID parent does not match the corresponding parent

  2014-11 - 02T 20: 34:33.652 - 08:00 [info 09880 "Default"] Sysimgbase_DiskLib_OpenWithPassPhrase failed with ' the virtual disk parent has changed since the child was created. "The content of the virtual disk ID parent does not match the ID of parent matching the child content ' (error code: 18)

  2014-11 - 02T 20: 34:33.652 - 08:00 [info 09880 "Default"] error 18 opening disk vpxa-nfcssl: / / [DataStore] [ComputerName]-000002.vmdk@[HostName]:902!52 fb 2nd fc 73 7f cb 0 a - aa 66 33 4f f4 99 aa d4.

  2014-11 - 02T 20: 34:33.652 - 08:00 [09880 WARNING "Default"] ERROR 18 opening disk vpxa-nfcssl: / / [DataStore] [MachineName]-000002.vmdk@[HostName]:902!52 fb 2nd fc 73 7f cb 0 a - aa 66 33 4f f4 99 aa d4.]

  2014-11 - 02T 20: 34:33.652 - 08:00 [error 09880 ' task-1' '] [BaseDiskSetComputer::DoOpen] OpenDisks failed, error mntapi: 290

  2014-11 - 02T 20: 34:33.652 - 08:00 [09880 error "task 1" "] [BaseDiskSetComputer::AnalyzeErrorAndThrow] error when opening game of diskettes, MNTAPI_ERROR = 290 MNTAPI errorType = 2 errorCode = 18

  2014-11 - 02T 20: 34:33.652 - 08:00 [09880 error "task 1" "] TaskImpl failed with std::Exception: 18 platform-specific error

  2014-11 - 02T 20: 34:33.652 - 08:00 [09880 info "task 1" "] TargetVmManagerImpl::DeleteVM

  Please let me know if you have seen this before? Several beams nothing research

  Forgotten this thread. Answering my own question here.

  A 3rd party backup application was automatically trying to save the newly created virtual computer (& each VM in the environment) which he had just finished.

  We stopped the automatic backup for each VM that enters the environment to avoid this problem in the future.

• Platform-specific error 1867

  Hello

  I'm trying to convert your laptop to a VMware Workstation image and I get the error immediately,

  A general error occurred: platform-specific error 1867.

  I can't find anything on this error online... Anyone seen this before?

  Details of the machine

  Lenovo T420s

  Windows 7 Pro x 64

  VMware Converter 5.1.0 build 1087880

  See you soon

  Peter Sheridan

  
  

  What type of drive is the d: drive? There are a few errors on the D: drive:

  2013-06 - 04T 17: 39:36.079 + 09:30 [02924 error 'Default'] cannot determine the amount of free space to import a location "D:\". »

  ...

  2013-06 - 04T 17: 39:58.166 + 09:30 [info 07796 "Default"] error 1867 opening disk D:\t420s.tsh.local\t420s.tsh.local.vmdk.

  Try to use as destination USB or SMB share.

  HTH

• Could not import the platform of error

  Hello
  
  I started the 3.1.0 agent HQ (the version with the included JRE) on a RedHat Linux 9 server and runs the automatic detection of the console of the server process. He discovered the new server as it should, but when I clicked on the button "Add to inventory", I got an error (see below).
  
  Impossible to import the platform: RuntimeException. nested exception is: org.hyperic.hq.common.SystemException: javax.ejb.TransactionRolledbackLocalException: error creating data IA platform: servers of type "FileServer" could not be created on the "Home network" type platforms CausedByException is: creation of data IA platform error: type servers 'FileServer' cannot be created on platforms of type "home network".
  
  Why is this happening?
  
  Thank you
  Brian

  I think there may be a misunderstanding here.  When you say that you "ran the autodiscovery process", which means exactly?  You shouldn't have to do anything else that start the agent on the platform, and then set up your dashboard HQ.  The platform will appear in the queue of the self-inventory and you can then import the platform and all discovered resources.  This type platform sounds like it should be "Solaris" and not "network host.  HQ thinks that it is a network host, leads me to believe that you tried to create a platform manually instead of using the discovery platform created to start the agent.

  Try the following steps:
  1 stop the agent on the affected platform.
  2. remove any resource platform linked to this inventory of HQ
  3. delete the "data" of the installation of the Agent HQ directory
  4. start the Agent from HQ (you will need to provide the login information from server again)
  5. connect to Headquarters as the superuser and look in the auto - inventory of your dashboard portlet.  The platform should appear there.
  6. Select the platform and click on the button to import it into your inventory HQ

  It should work, if not answered and I will work with you to get your server.log and agent.log and troubleshoot more.

• Set-VM the vCenter Server fails to decrypt the passwords stored in the customization specification error

  This error in executing the PowerCLI code below

  Environment

  5.5 b

  Using PowerCLI 5.5

  Do not use a custom certificate

  (1) tried to use passwords in clear text in the script (not my favorite)

  (2) tried to retype the password in the customization specifications (join the domain and local administrator options)

  (3) tried to use Get-Credential as stored creds

  (4) I don't know how to put the password in the XML file in clear text (not my favorite) - looking at it now.

  #Load PowerCLI a snap

  function LoadSnapin {}
  Param ($PSSnapinName)
  If (!) () Get-PSSnapin. where {$_.} Name - eq $PSSnapinName})) {}
  Add-pssnapin-name $PSSnapinName
  }
  }
  LoadSnapin - PSSnapinName 'VMware.VimAutomation.Core '.

  
  #Create VM
  $ParentVMName = "Parent2012r2VM".
  $vCenterHostName = 'vCenter.
  $vCenterUserName = "domain\user".
  $vCenterUserPassword = "Password"
  SE connect-VIServer-Server "vCenter' - User $vCenterUserName - password $vCenterUserPassword

  #$cred = get-Credential
  #connect-viserver-Server "vCenter" - Credential

  $cloneName = 'Server1 '.
  $sourceVM = get - VM $ParentVMName | Get-View
  $cloneFolder = $sourceVM.parent
  $cloneSpec = new-object Vmware.Vim.VirtualMachineCloneSpec
  $cloneSpec.Snapshot = $sourceVM.Snapshot.CurrentSnapshot
  $cloneSpec.Location = new-object Vmware.Vim.VirtualMachineRelocateSpec
  $cloneSpec.Location.DiskMoveType = [Vmware.Vim.VirtualMachineRelocateDiskMoveOptions]: createNewChildDiskBacking
  $sourceVM.CloneVM_Task ($cloneFolder, $cloneName, $cloneSpec)

  
  #Update temporary spec
  [string] $Domain = "Domain".
  [string] $DomainUserName = "user@domain".
  [string] $DomainPassword = "password"
  $Spec = get-OSCustomizationSpec "CustomSpec1" | New-OSCustomizationSpec-name "tmp01" - non-permanent Type | Game-OSCustomizationSpec-domain $Domain - DomainUsername $DomainUsername - DomainPassword $DomainPassword
  $Spec = get-OSCustomizationNicMapping-Spec $Spec | Game-OSCustomizationNicMapping - IPmode UseStaticIP - IPAddress 'x.x.x.x' - SubnetMask - DefaultGateway x.x.x.x - x.x.x.x DNS 'x.x.x.x', 'x.x.x.x '.
  $Spec = get-OSCustomizationSpec "tmp01".

  
  #Apply temporary spec
  $VM = get - VM "Server1."
  Get - VM $VM | Get-NetworkAdapter | Together-NetworkAdapter - PortGroup "PortGroup1" - confirm: $false | out-null
  #Errors on this line
  Get - VM $VM | Set-VM - OSCustomizationSpec $Spec - confirm: $false | Start-vm

  Disconnect-VIServer-Server "vCenter" - confirm: $false | out-null

  I gave up trying to clone an existing config a spec just dynamically created in memory, and applied.  It was a LOT easier and had no password problems.

• Same material, cannot vmotion.  Stops at 13% with a general system error occurred: invalid argument.

  I have four IBM (now Lenovo) x 3550 M4 (7914AC1) hosts that have been purchased by groups of two, several months apart.  Those purchased at the same time can vmotion between them but they cannot vmotion with those bought later OR with one of our older infrastructure (Nehalem IBM level - x 3650 M3, M3 x 3550, etc.).  The most recent M4 can talk to the fine old hosts.  Can I migrate invited powered down.

  VMware support was not able to give any help on this matter and have lost instead of my time (including do not contact me for weeks and also current exit without changing to another engineer; manager failed in this regard, too).

  I pulled the material apart - I can say it's all the same material (looks the same, has the same numbers and RUF).  The machines were configured the same.

  Firmware isn't exactly the same thing on the material but is VERY close.  I have one of each generation updated with the same Xpresspacks of IBM, and so except for the image diagnosis of pre-start, I think that they are the same.  I'll check this again once then.

  VMware drivers are the same.  They were not.  They are now.  I got 5.5 latest drivers for everything that I can find a driver for (including cards CF - using the driver Qlogic native VMware NICS (igb); approx 10 GB (not being use IGB but fact still); the provider CIM, MegaRAID controller.  I used VUM update their last 5.5 (standard license) with all the patches.  vCenter is a 5.5 vCSA was last updated.  I went into the BIOS settings side-by-side and ensured that everything is the same.  I did the same thing with everything I could think of in vSphere (found about 5 differences, but nothing fixed).

  Management is the network of vMotion.  It's on the same VLAN as one of those guests are on (the clients are spread over 5 different VLAN).  VMware support put in place a different vSwitch for vMotion with no luck.

  The symptoms are the same regardless of their orientation (old to the new, new to the former) and don't care about the type of virtual machine (Windows 2008R2, CentOS 5.5, RHEL 6.7) or at the level of the material (VM 10 or 7 VM).  It also fails if it is standard or high priority or if it is with the web client or the Windows client.

  The place with the most characteristic symptom that doesn't show anywhere in googleland except to the pastebin is in the file /scratch/log/hostd.log of the host.  The host that sends the guest throws a vmsvc.vm error VMotionCmdCb [1461010590046389] 'a': error - 6: invalid argument.

  If anyone else has seen this (obviously someone because it is on pastebin) and understood, please enlighten me.

  Thank you!

  Jeff

  These are the two hostd.log files (most recent, from the host first, then older receiver host).

  -----------------------

  From Server hostd.log:

  -----------------------

  2016 04-18 T 20: 16:29.927Z [37501 B 70 verbose "Default" opID = user F2241F42 - 000018 D 1-64-1 b = vpxuser] AdapterServer: target ='vim. VirtualMachine:2', method = "refreshStorageInfo".

  2016 04-18 T 20: 16:29.956Z [37501 B 70 'Hbrsvc' verbose opID = F2241F42 - 000018 D 1-64-1 b user = vpxuser] Replicator: VmFileProviderCallback VM (id = 2).

  2016 04-18 T 20: 16:29.972Z [37501 B 70 verbose opID "Default" = cb7f34c4 user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'GetPerfCounter'"

  2016 04-18 T 20: 16:29.978Z [37280 B 70 'Local' verbose opID = cb7f34c4 user = vpxuser] Default resource used for "counter.vsanDomObj.writeThroughput.summary" planned for the module "perf."

  2016 04-18 T 20: 16:29.992Z [37280 B 70 verbose opID "Default" = cb7f34c4 user = vpxuser] AdapterServer: target ='vim. HostSystem: ha-host ", method = 'retrieveInternalCapability'"

  2016 04-18 T 20: 16:29.993Z [37280 B 70 verbose opID "Default" = cb7f34c4 user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'queryPerfCounterInt'"

  2016 04-18 T 20: 16:30.002Z [37280 B 70 verbose opID "Default" = cb7f34c4 user = vpxuser] AdapterServer: target ='vim. LicenseManager: ha-license-manager ", method = 'GetLicenses'"

  2016 04-18 T 20: 16:30.002Z [37280 B 70 verbose 'Vimsvc.ha - License-Manager' opID = cb7f34c4 user = vpxuser] load: existing file loading: /etc/vmware/license.cfg

  2016 04-18 T 20: 16:30.014Z [37280 B 70 verbose opID "Default" = cb7f34c4 user = vpxuser] ha-license-manager: validate-> valid license found for "VMware ESX Server 5.0" (lastError = 0, desc.) IsValid:Yes)

  2016 04-18 T 20: 16:30.172Z [35981 B 70 verbose opID "Default" = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] AdapterServer: target ='vim.host.VMotionManager:ha - vmotionmgr ", method ="prepareSourceEx"

  2016 04-18 T 20: 16:30.172Z [37280 B 70 info 'Vcsvc.VMotion' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] PrepareSourceEx [1461010590046389], VM = '2'

  2016 04-18 T 20: 16:30.172Z [37280 B 70 info "Vcsvc.VMotionSrc (1461010590046389)" opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionEntry: migrateType = 1

  2016 04-18 T 20: 16:30.172Z [37280 B 70 verbose opID ' Vcsvc.VMotionSrc (1461010590046389) "F2241F42 - 000018 D 1-64-a2-71 = user = vpxuser] JrnlCreate: created 1461010590.14

  2016 04-18 T 20: 16:30.172Z [37280 B 70 "Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx" info opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] Transition State (VM_STATE_ON-> VM_STATE_EMIGRATING)

  2016 04-18 T 20: 16:30.172Z [info 37280 B 70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.eduvmx' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare (1461010590046389): sending "to" srcIp = 10.10.6.108 supporting = 10.10.6.73, type = 1, encrypted = false, remoteThumbprint = 28, 5 C: C3:9 C: 3E:BA:79:EA:B5:19:CC:A9:36:34:C1:10:48:46:F0:0E

  2016 04-18 T 20: 16:30.172Z [info 37280 B 70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx ' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: = srcLoggingIp

  2016 04-18 T 20: 16:30.172Z [info 37280 B 70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx ' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: = dstLoggingIp

  2016 04-18 T 20: 16:30.172Z [info 37280 B 70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx ' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: srcMgmtIp = 10.10.6.108

  2016 04-18 T 20: 16:30.172Z [info 37280 B 70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx ' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: dstMgmtIp = 2620:91:0:96:73

  2016 04-18 T 20: 16:30.172Z [37280 B 70 "Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx" info opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: = dstVmDirPath / vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7 /guestvm.mydomain.edu/.

  2016 04-18 T 20: 16:30.172Z [info 37280 B 70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx ' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: dstVmFileName =guestvm.mydomain.edu.vmx

  2016 04-18 T 20: 16:30.173Z [37280 B 70 "Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx" info opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] SetVmdbVirtualDeviceChange: deviceChange # 0

  SIOC: SIOC is not notified to start the injector

  2016 04-18 T 20: 16:30.173Z [37280 B 70 verbose opID ' Vcsvc.VMotionSrc (1461010590046389) "F2241F42 - 000018 D 1-64-a2-71 = user = vpxuser] Migration changed state from NONE to BEGIN

  2016 04-18 T 20: 16:30.173Z [37280 B 70 info 'Vcsvc.VMotion' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] finished scheduling PrepareSourceEx [1461010590046389].

  2016 04-18 T 20: 16:30.173Z [' info 36591 B 70 ' vm: / vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7 /guestvm.mydomain.edu/guestvm.mydomain.edu.vmx "] disconnect the current control.

  2016 04-18 T 20: 16:30.173Z [FFA4FB70 verbose opID "Default" = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] AdapterServer: target ='vmodl.query.PropertyCollector:ha - property-collector ", method = 'createFilter'"

  2016 04-18 T 20: 16:30.174Z [info 372C1B70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx '] VMotionCmdCb [1461010590046389] 'a': error - 6: invalid argument

  2016 04-18 T 20: 16:30.174Z [info 372C1B70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx '] VMotionCmdCb [1461010590046389]: prepare the job completed with error vmodl.fault.SystemError

  2016 04-18 T 20: 16:30.174Z [372C1B70 verbose 'Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx"] VMotionCmdCb: shooting ResolveCb

  2016 04-18 T 20: 16:30.174Z [372C1B70 info ' Vcsvc.VMotionSrc (1461010590046389) "] ResolveCb: VMX reports needsUnregister = false for migrateType MIGRATE_TYPE_VMOTION

  2016 04-18 T 20: 16:30.174Z [372C1B70 info ' Vcsvc.VMotionSrc (1461010590046389) "] ResolveCb: failed with error: {(vmodl.fault.SystemError)

  -> dynamicType = < unset >

  -> faultCause = (vmodl. NULL in MethodFault),

  -> reason = "Invalid Argument."

  -> msg = ""

  ->}

  2016 04-18 T 20: 16:30.174Z [verbose 372C1B70 "Vcsvc.VMotionSrc (1461010590046389)"] Migration changed State to BEGIN done

  2016 04-18 T 20: 16:30.174Z [verbose 372C1B70 "Vcsvc.VMotionSrc (1461010590046389)"] called finished

  2016 04-18 T 20: 16:30.174Z [372C1B70 "Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx" info] State of Transition (VM_STATE_EMIGRATING-> VM_STATE_ON)

  2016 04-18 T 20: 16:30.174Z [37280 B 70 'Hostsvc' verbose] change of State received for VM ' 2'

  2016 04-18 T 20: 16:30.174Z [37280 B 70 'Guestsvc.GuestFileTransferImpl' info] entered VmPowerStateListener

  2016 04-18 T 20: 16:30.174Z [37280 B 70 'Guestsvc.GuestFileTransferImpl' info] successful VmPowerStateListener

  2016 04-18 T 20: 16:30.174Z [37280 B 70 'Hbrsvc' info] Replicator: powerstate change VM: 2 old: 1 new: 1

  2016 04-18 T 20: 16:30.174Z ['Hostsvc' 372C1B70 info] decremented SIOC injector Flag2

  2016 04-18 T 20: 16:30.174Z [372C1B70 "Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx" info] VMotion finished cleaning

  2016 04-18 T 20: 16:30.174Z [verbose 372C1B70 "Vcsvc.VMotionSrc (1461010590046389)"] JrnlEnd: writes active = 0

  2016 04-18 T 20: 16:30.174Z [verbose 372C1B70 "Vcsvc.VMotionSrc (1461010590046389)"] JrnlEnd: finished journal

  2016 04-18 T 20: 16:30.175Z [verbose 372C1B70 "Vcsvc.VMotionSrc (1461010590046389)"] /var/lib/vmware/hostd/journal/1461010590.14 [JrnlFilePersistenceProvider::DeleteJournal] removal.

  2016 04-18 T 20: 16:30.175Z [verbose 372C1B70 "Vcsvc.VMotionSrc (1461010590046389)"] JrnlDelete: deleted journal

  2016 04-18 T 20: 16:30.175Z [37280 B 70 'Hbrsvc' verbose] Replicator: Remove only group no entry for VM (id = 2)

  2016 04-18 T 20: 16:30.180Z [37501 B 70 verbose opID "Default" = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] AdapterServer: target='vmodl.query.PropertyCollector.Filter:session[574b3c38-6a6b-214e-4bf3-428b10abded9]52760c3e-4722-159c-5c3a-df6eb23ddbbc ", method = 'destroy'

  2016 04-18 T 20: 16:30.201Z [372C1B70 verbose opID "Default" = 44d5f9ee user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'GetPerfCounter'"

  2016 04-18 T 20: 16:30.207Z [372C1B70 verbose 'Local' opID = 44d5f9ee user = vpxuser] Default resource used for "counter.vsanDomObj.writeThroughput.summary" planned for the module "perf."

  2016 04-18 T 20: 16:30.223Z [37501 B 70 verbose opID "Default" = 44d5f9ee user = vpxuser] AdapterServer: target ='vim. HostSystem: ha-host ", method = 'retrieveInternalCapability'"

  2016 04-18 T 20: 16:30.224Z [372C1B70 verbose opID "Default" = 44d5f9ee user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'queryPerfCounterInt'"

  2016 04-18 T 20: 16:31.162Z [35981 B 70 verbose 'SoapAdapter"] responded to the request of the State of service

  2016 04-18 T 20: 16:31.314Z [35981 B 70 verbose opID 'Default' F2241F42 - 000018 D 1-64-a2-b7 = user = vpxuser] AdapterServer: target ='vim.host.VMotionManager:ha - vmotionmgr ", method ="completeSource"

  2016 04-18 T 20: 16:31.314Z [37501 B 70 info 'Vcsvc.VMotion' opID = F2241F42 - 000018 D 1-64-a2-b7 user = vpxuser] CompleteSource [1461010590046389]

  2016 04-18 T 20: 16:31.320Z [35981 B 70 verbose opID "Default" = 8590ebdf user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'GetPerfCounter'"

  2016 04-18 T 20: 16:31.326Z [35981 B 70 'Local' verbose opID = 8590ebdf user = vpxuser] Default resource used for "counter.vsanDomObj.writeThroughput.summary" planned for the module "perf."

  2016 04-18 T 20: 16:31.340Z [35981 B 70 verbose opID "Default" = 8590ebdf user = vpxuser] AdapterServer: target ='vim. HostSystem: ha-host ", method = 'retrieveInternalCapability'"

  2016 04-18 T 20: 16:31.342Z [37501 B 70 verbose opID "Default" = 8590ebdf user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'queryPerfCounterInt'"

  2016 04-18 T 20: 16:31.356Z [35981 B 70 verbose opID "Default" = 8590ebdf user = vpxuser] AdapterServer: target ='vim. LicenseManager: ha-license-manager ", method = 'GetLicenses'"

  2016 04-18 T 20: 16:31.356Z [35981 B 70 verbose 'Vimsvc.ha - License-Manager' opID = 8590ebdf user = vpxuser] load: existing file loading: /etc/vmware/license.cfg

  2016 04-18 T 20: 16:31.371Z [35981 B 70 verbose opID "Default" = 8590ebdf user = vpxuser] ha-license-manager: validate-> valid license found for "VMware ESX Server 5.0" (lastError = 0, desc.) IsValid:Yes)

  -----------------------

  Hostd.log of the reception host:

  -----------------------

  2016 04-18 T 20: 16:29.798Z [FFD35B70 'Hostsvc.DvsManager' verbose] called PersistAllDvsInfo

  2016 04-18 T 20: 16:30.245Z [29940 B 70 verbose opID "Default" = ac976ee5 user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'GetPerfCounter'"

  2016 04-18 T 20: 16:30.251Z [29940 B 70 'Local' verbose opID = ac976ee5 user = vpxuser] Default resource used for "counter.vsanDomObj.writeThroughput.summary" planned for the module "perf."

  2016 04-18 T 20: 16:30.265Z [29940 B 70 verbose opID "Default" = ac976ee5 user = vpxuser] AdapterServer: target ='vim. HostSystem: ha-host ", method = 'retrieveInternalCapability'"

  2016 04-18 T 20: 16:30.267Z [29940 B 70 verbose opID "Default" = ac976ee5 user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'queryPerfCounterInt'"

  2016 04-18 T 20: 16:31.412Z [2BAC2B70 verbose opID "Default" = F2241F42 - 000018 D 1-64-a2-e5 user = vpxuser] AdapterServer: target ='vim.host.VMotionManager:ha - vmotionmgr ", method ="completeDestination"

  2016 04-18 T 20: 16:31.412Z [2BAC2B70 info 'Vcsvc.VMotion' opID = F2241F42 - 000018 D 1-64-a2-e5 user = vpxuser] CompleteDestination [1461010590046389]

  2016 04-18 T 20: 16:31.412Z [2BAC2B70 WARNING opID "Vcsvc.VMotion" = F2241F42 - 000018 D 1-64-a2-e5 user = vpxuser] CompleteDestination: card not found

  2016 04-18 T 20: 16:31.417Z [29940 B 70 verbose opID "Default" = fa72f2f7 user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'GetPerfCounter'"

  2016 04-18 T 20: 16:31.424Z [29940 B 70 'Local' verbose opID = fa72f2f7 user = vpxuser] Default resource used for "counter.vsanDomObj.writeThroughput.summary" planned for the module "perf."

  2016 04-18 T 20: 16:31.439Z [FFD35B70 verbose opID "Default" = fa72f2f7 user = vpxuser] AdapterServer: target ='vim. HostSystem: ha-host ", method = 'retrieveInternalCapability'"

  2016 04-18 T 20: 16:31.441Z [29940 B 70 verbose opID "Default" = fa72f2f7 user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'queryPerfCounterInt'"

  Using IPv6 on new hosts? If so, try disabling:

  2016 04-18 T 20: 16:30.172Z [37280 B 70 info 'Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.eduvmx' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare (1461010590046389): sending "to" srcIp = 10.10.6.108 supporting = 10.10.6.73, type = 1, encrypted = false, remoteThumbprint = 28, 5 C: C3:9 C: 3E:BA:79:EA:B5:19:CC:A9:36:34:C1:10:48:46:F0:0E

  2016 04-18 T 20: 16:30.172Z [37280 B 70 info 'Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: = srcLoggingIp

  2016 04-18 T 20: 16:30.172Z [37280 B 70 info 'Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: = dstLoggingIp

  2016 04-18 T 20: 16:30.172Z [37280 B 70 info 'Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: srcMgmtIp = 10.10.6.108

  2016 04-18 T 20: 16:30.172Z [37280 B 70 info 'Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: dstMgmtIp = 2620:91:0:96:73

• The blackBerry Smartphones connector specific error

  I'm having a problem to sync my address book phone with my outlook address book.  Get the connector specific error need help

  Hello

  We have problems of link:

• Driver is not intended for this platform (install the latest driver for Verizon Wireless WAN (UNDP))

  Hello

  My Verizon Wireless WAN has worked on my T500 (2081CT 0, 4 GB of RAM, Windows Vista Business 64) since I received it last September. This morning it stopped working. Said that the card has not been activated. Ask Verizon and Lenovo have been pretty useless - each blamed the other, I so put on my own.

  -I uninstalled the driver for the Qualcomm HS USB card integrated, downloaded the latest version of the driver (transferred via CDROM since I can't connect to this laptop to the network where I work) and tried to install it. The HS-USB card is now displayed in the devices as "Unknown device" Manager (under 'other devices'), and his device status is:

  "The drivers for this device are not installed. (Code 28)

  Driver is not intended for this platform.

  To reinstall the drivers for this device, click on reinstall the driver. »

  Huh?

  Of course, reinstall driver does not work, the first problem is that he can't find online because I don't have internet connection without the card.  This driver has been installed from the following link:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-69999

  Seems to me that it should work on this machine. What I am doing wrong?

  -Some additional background: I've had several accidents recently, including at least two yesterday with blue screens. Easy to believe something has become corrupted, that's why I tried to uninstall and reinstall the driver.

  Help!

  Thank you very much.

  Solution was to uninstall the 'unknown device', search for new hardware and follow the promts by selecting all default values.

• Pavilion dv7-6135dx screens on the video driver blue igdpmd64.sys after the platform update KB2670838

  Windows Update has delivered platform update KB2670838 Feb. 27.

  After that, any time I open Internet Explorer, I get a blue screen of death which calls igdpmd64.sys, which is part of the video driver.

  I tried to install the latest video driver HP site was for this machine, even though it is dated as a couple of years.  But he says that I don't have the minimum requirements.   !!??

  I tried a restore point before and everything was fine.

  I let go of the front through the platform Windows Update again and the same problem.

  Now today I have no restore point so I can't go back.

  Because now I am simply not using IE, everything else works fine so far.

  Here are my questions...

  1. is this a known problem of someone else?  Is there an article on the best solution anywhere yet?

  2. suggested approaches to solve this?

  3. How can I get the alternative video drivers to try?

  3A. HP Site latest since this laptop says that it does not meet the min requirements!

  3B. should I even try the following more old?

  3 c. pros and cons of try the drivers of Intel or ATI sites instead of on HP site

  4. If after testing things, if I wanted to reinstall my current driver, how 'save', or protect some how now?  (I think THAT it is the original of the 2011 original installation schedule)

  5. How can I do to reinstall the video driver as 'supplied with the machine', for example since the recovery D: partition?

  6. If I end up having to reinstall Windows, how to do that since the recovery partition?

  Hey cfravel,

  All major issues! Sorry to hear that you use in the blue screens, but you did a good job of troubleshooting. I'll answer the questions in the order that you asked them.

  1 and 2.  Here is a link to the Microsoft Forumwhere there was a similar question. It looks like uninstalling and hiding the implementation update will correct the problem. To uninstall an update,

  • Click Start
  • Program 'type '.
  • Click on programs and features
  • Click View Installed Updates (left)
  • Search for KB2670838.
  • Select this option and click on uninstall.

  To hide the update,

  • Click Start
  • Type "update".
  • Click on Windows Update
  • Click Find updates
  • Click "# important updates available"
  • Search for KB2670838
  • Right-click on it and click on hide (you can always restore hidden updates in the future if you want by clicking on "restore hidden updates" from the main screen of Windows Update.

  3. here is the correct driver for your laptop HP Special Page. I think you're probably already doing it correctly, but just in case. How many times have you tried this driver? Try a couple of times.

  3B. Yes you could certainly try the next previous driver.

  3 c. the drivers coming from Intel or ATI are almost the same driver in most cases. We invite you to try them because they can always be uninstalled. Just, they are not guaranteed to work properly for your specific model.

  4. There are two versions of the driver for your ATI video chip. These and all future versions will still be available on your driver page. Click on the link under the latest driver that says "available versions" for a complete list of all the versions that are never released.

  5. to reinstall the driver of origin or any other original software that is preinstalled on your laptop, you can use HP Recovery Manager.

  • Click Start
  • Type "HP recovery".
  • Click HP Recovery Manager
  • Click re - install the drivers and software.
  • Scroll through the list and select drivers or software to install. These drivers will still be available on your page of driver as well.

  6 here is a link on how to reinstall Windows from the recovery partition. In the links in blue at the top, click on "Recovering from the start (in the system startup) screen". This is a very simple process.

  Please let me know if you have any questions or if these suggestions helped (it could help others with similar issues). I'll keep an eye out for your answer!

• Flight Simulator 2004 install stops at 97% say there is an error with the file world.cab

  While the resettlement of fs2004, the installation stops at 97% saying there is an error with the file world.cab, this damaged disc 4.  Someone at - he found a solution to this?

  Thank you

  Well, if, as you say, the disc is damaged. The solution would be to get another drive.

  Although I would have a look at the following:

  Take a look at the following: http://support.microsoft.com/kb/258496

  I hope that, if necessary, you can get a free replacement disc.

• Please help to choose the order of drivers when I get the "Display Driver Stopped Responding and has recovered" message

  Running: Win7 - XPS 8100 8 GB - 64 bit OS

  Graphics card: ATI Radeon HD 5450

  Serial number ADMIN NOTE: maintain the label removed by privacy policy >

  Hello

  Recently I get this message as the computer freezes momentarily and then recovers.

  "Display driver AMD driver stopped responding and has successfully recovered."

  I checked the support for Dell drivers and received conflicting results.

  When I checked with the help of system analysis, it gave me a list of the 54 system-wide updates. How could it be possible?

  When you use the label of my service, I got the following result:

  ADMIN NOTE: maintain the label removed by privacy policy >

  Don't you think that's what I use, and if yes, can you tell me who I should first put to date? Finally, what I have to uninstall the old drivers and update via the Device Manager?

  Thanks in advance for your help,

  Jane

  54 updates is not necessary. You should only update a driver to correct a specific problem. You don't need to remove the video card driver before installing a newer version.

  * Go here
  * Click on download
  * The file should save on your windows desktop
  * Double-click the file
  Follow the instructions