P2V error: FAILED: an error occurred during conversion: "2338 ' platform-specific error".

Similar Questions

• Fails at 1% with the error "FAILED: an error occurred during conversion:" "2338' platform-specific error".

  I'm trying to convert a physical Windows Server 2003 Web Edition SP2 with converter (v 5.1) and each time it fails with the error "FAILED: an error occurred during conversion:"2338 ' platform-specific error.

  Some errors in the paper seem to point to a hard disk problem but I defragment the disk and then ran a chkdsk and the disk seems good.

  I appreciate all help.

  Your physical machine cannot access ESX:

  2013-05-25 T 11: 07:26.602 - 05:00 [03816 WARNING 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Unable to connect to the server 10.1.2.18:902

  You must allow the connection between the physical machine and ESX @ port 902.

  HTH

• I do P2V of a Linux Machine, his failure with the error "FAILED: an error occurred during conversion:"root is not found""If anyone can suggest how to solve this. "

  I do P2V of a Linux Machine, his failure with the error "FAILED: an error occurred during conversion:"root is not found""If anyone can suggest how to solve this...» He does not drive partition root to copy don't know why his account right there.

  I solved the problem myself... This is because the Version of Vcenter Converter. I'm using Vcenter Converter 5 to P2V a server Linux RHEL5.2, its not supported by Vcenter Converter 5. That of why I've done P2V using Vcenter Converter5.2 and accomplished.

• FAILED: An error occurred during conversion: "native initrd patch supports only Rhel, SLE and Ubuntu.

  When I use the converter P2V a VM to ESXi. The VM OS is SUSE10SP2. the process is 98%, give the error:

  FAILED: An error occurred during conversion: "native initrd patch supports only Rhel, SLE and Ubuntu.

  Source operating system is SLES10SP2

  How to deal?

  The source has been recognized as "suse", not as "sles:

  -->

  Are you sure it's SuSE Enterprise and not Open SuSE? Converter supports SLES only.

  Anyway, you can try a hack to make apparently SLES - change the ' / etc/SuSE-release ' on the source machine (or something similar in the model/etc / *-free) and in the first line add "Enterprise." Then try the conversion again. It's the machine 'lsuseinux90 '.

  Regarding the "opscenter' - version has not been recognized too. The second line in the output file should be something like "VERSION = xx".

  HTH

  Plamen

• FAILED: An error occurred during conversion: 'unknown exception '.

  Im not able to convert servers more.

  She always be limited to 1% with the error:

  FAILED: An error occurred during conversion:
  'Unknown exception '.

  IM using converter 5.0.0 build-470252 and ESXi v4.1

  Someone who can help?

  Firewall it s ok to p2v?

• FAILED: An error occurred during conversion: "the operation encountered a network error.

  Hello world.

  I used VMware Converter Standalone 6.0 converter Server 2003 on Hyper-V to host ESX to vCenter.

  Hyper-V have IP: 10.132.2.200

  vCenter have IP: 10.132.2.177

  ESXi host have IP: 10.132.2.192

  We have no political firewall for 3 IP this. All ports are open in the firewall.

  But when I convertering 1% who have the error with the State: FAILED: an error occurred during conversion: 'the operation encountered a network error'

  So can you help me fix this case?

  Best regards.
  

  Hello Hongchuong

  It really looks like a secure network communication. You write no firewall blocks but we will go into more detail. The connection must be established from the Hyper-V (10.132.2.200) host to the ESXi (10.132.2.192) host on port 902, as in log lines:

  2015 07-12 T 14: 03:46.634 + 07:00 info vmware-converter-agent [03900] [sub Originator@6876 = task 1] establishment nfc connect to host 10.132.2.192 port 902

  2015 07-12 T 14: 03:47.193 + 07:00 info vmware-converter-agent [03900] [sub Originator@6876 = task 1] disc Sysimgbase_Nfc_PutFile source: Disks\Hyp2K3-Goc_5110F977-7064-4B81-9452-BDAE36EE9C9D.avhd hard E:\MayAo_Hyp\Hyp2K3-LT\Virtual, target disc [Datastore-SAN2] Hyp2K3-HDND/Hyp2K3 - HDND.vmdk

  2015 07-12 T 14: 06:44.992 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] [NFC ERROR] NfcNetTcpWrite: bwritten:-1

  2015 07-12 T 14: 06:44.992 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] NfcFile_SendMessage [NFC ERROR]: data send failed:

  2015 07-12 T 14: 06:44.992 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] [NFC ERROR] the operation encountered a network error - failed to send of data message

  2015 07-12 T 14: 06:45.056 + 07:00 error vmware-converter-agent [03900] [sub Originator@6876 = task-1] Sysimgbase_Nfc_PutFile failed in H2MDiskCloneMgr with nfcError "the operation encountered a network error" (error code: 3)

  2015 07-12 T 14: 06:45.069 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] SSL: SSL unknown error

  2015 07-12 T 14: 06:45.069 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] [NFC ERROR] NfcNetTcpWrite: bwritten:-1

  2015 07-12 T 14: 06:45.069 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = default] [, 0] NfcSendMessage [NFC ERROR]: send failed: NFC_NETWORK_ERROR

  An easy way to try the connectivity is telnet from the Hyper-V host to ESX host on port 902

  I see you have also tried again to destination 10.132.2.191 with the same error.  It is possible that Hyper-V firewall is blocking.

  HTH

  Plamen

• Conversion failed Acronis backup of windows 2003 server to EXsI: FAILED: an error occurred during conversion: "an error of file encountered.

  I am trying to convert an image backup acronis tru to a windows 2003 server to a server esxi virtual computer, a system I had converted previously on 4.x and exsi 5.1 Converter and using the same image and same PC to convert, but now he is unable to 59% with the status:

  FAILED: An error occurred during conversion: "a file error has been detected" and error: error: impossible to clone the C:\Windows\TEMP\vmware-temp\vmware-me\nvdsxwvgwgxyklny\disk-1.vmdk drive on the virtual machine "server."

  Don't know where to go with this.

  Anyone have any ideas?

  Unfortunately, there is a mistake in your image file: 2014-05 - 20 T 20: 41:17.034 - 04:00 [02140 WARNING 'Default'] [, 0] [NFC ERROR] read has no curSector = 588398592, nSectors = 512: failure of a custom of third party library function call: (3116).

  Seems like you need to repair the virtual machine somehow, probably you start it, or use a tool acronis to repair the image.

• FAILED: An error occurred during conversion

  I installed the VMware vCenter Standalone Converter software on our 64-bit system Redhat requiring to be virtualized, then I also installed it on a Windows XP system on the network.  Then, I installed the ESX Server on a third-party system.  Windows system was able to start a conversion of the Redhat box on the ESX Server, however the conversion failed with the message: FAILED: an error occurred during conversion

  How to solve this?  I have attached the logs that were created for this attempt.

  Thank you.

  Same error found in your newspaper, but on another partition (your "/")

  Please refer to this post

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• Converter does not reach 1% - "an error occurred during conversion:"converter.fault.ConverterFileFault"

  I'm trying to convert a laptop of ageing of a virtual machine, but it does not reach 1% with the vague error "an error occurred during conversion:"converter.fault.ConverterFileFault. "

  With VMware vCenter Converter Standalone Client 5.5.1 build 1682692 locally running the conversion of the machine running.

  On a laptop with WinXP Sp3, with a single drive, by recording the VM on a USB hard drive attached.

  I have run chkdsk on the drive. (with the F option) and defragmented several times

  Shadow copy services have been restarted and are running.  I even downloaded the VSS SDK and replaced the *.dll.
  It is with the latest version of the client converter

  No firewall is active.

  I am logged on as administrator, even tried to create a role of administrator with the name "Administrator".

  Drive is not encrypted I can say (no Truecrypt)

  The xp includes backup works (i.e. work VSS)

  I looked at the other questions/logs here, but do not see the same exact

  VMWare Converter error: impossible to clone the volume C

  Converter fails at 1%

  UPDATE: Solution via Hack
  I could get this job sort of a hard-working hack.

  I first downloaded Acronis image 2014 (a free 30 day trial) then who used to capture the image of the operating system, the * tib file is about 40 GB in size.

  Unfortunately VMWare converter works only with version of Acronis 2012, so the *.tib file could not be used directly to the source of the virtual machine

  So I created inside VMWare Workstation a new empty VM for Windows XP

  I gave her 2 virtual disks hard 50 GB and 50 GB mapped as C: and H:

  reinstalled windows in the C

  copied the *.tib in the secondary hard drive H: as shared folders (for example how a USB is sometimes mounted) are not accessible when the Acronis is restoration of the tib via its custom BootLoader

  Download and install Acronis image 2014 on this new fresh OS

  used Acronis to restore from this backup on H: * tib in the C: crush installing the OS

  reactivated again, windows

  fighting pilots who the real differeed

  Defragment the drive VMware

  Seems to work as expected.

  I got this job, see the update on the use of Acronis to work around the problem.

• An error occurred during conversion: the operation encountered a network error.

  Nice day. We are currently trying to convert vm to ESX 3.5 to 5.5 using the media only converter ver 5.5. The conversion with 2% with the operation failure encountered a network error. I then submitted back to the job and selected only 1 drive 5, drive system, and successfully completed. How I will go about to get the 4 remaining disks converted to the already existing virtual machine?

  I don't understand.

  Make another conversion to another virtual machine. Do so without reconfig because it will be without the system volume.

  Then attach disks resulting for the virtual machine from the previous conversion.

• The drive stops at 1% with the platform-specific error 2338

  Hello

  I'm P2V a Windows 2003 server in my vCenter environment 5.1.

  Using Converter Standalone version 5.1.0

  All ports is open I firewalls, but still I get this error:

  FAILED: An error occurred during conversion:

  'Platform-specific error 2338'

  I am attaching a logfile here, so if anyone can help to understand what causes the error, I understand that :)

  When you select a host in a DRS cluster automated, it's the vCenter server who makes the decision what ESX host in the cluster to use. If it's a manual DRS or non - DRS cluster, you can select the specific host. The obvious difference of the user, is that in the latter case there is an extra drop-down box for the selection of the host.

  In fact, it's some sort of bug in user experience, because this difference in behavior is not clear. The guide mentions on 49, but we know not to be cut.

  Kind regards

  Plamen

• P2V fails with "error: an error occurred during the reconfiguration.

  Hi, we're starting everything just to P2V of our servers and start easy (I thought) qith our WSUS server. Every time I start the job fails on 98% with the error "error: an error occurred during the reconfiguration. I tried to re-boot, I tried to tell the wizard not to include a disk which is compressed. and I tried making minimal changes to the settings all with the same error...

  I don't know what to try next...

  I have attached the diagnostic logs in the hope that some kind soul can point me in the right direction...

  Thank you very much

  Matt

  Have you tried to remove the/3 GB switch to the boot.ini file?

• The system restore failed. Error message (unspecified error occurred during restore).

  The system restore failed.  Error message (unspecified error occurred during restore).  I am running Windows Vista Home Premium.  I uninstalled Mcafee Security Suite and System Mechanic 9 which are the security only packages I have.  After uninstalling the above, I tried several points with restore the with the same results.  Any ideas?

  Nortonn, McAfee etc often stops system restore:

  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  Run more high tool ot remove all McAfee.

  1. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  2 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• An unknown error has occurred during playback of the video file. failed to connect to the server of dynamic links

  I recently bought a drone DJI Phantom 3 kind have been treatment of videos more than usual and not have not had any problems. I use Lightroom for cataloging movies and I use the first to change.

  Since yesterday, I was not able to import any movie that I get the following error

  an unknown error has occurred during playback of the video file. failed to connect to the server of dynamic links

  

  Initially, I thought that it was due to a spectacular crash of drone (Physics isn't SHE!) who corrupted the file that was being logged, m ais I can now no longer import any movie to Lightroom.

  
  I tried the following

  1. a different memory with a new registration card

  2 removing and re - import an old movie

  3. to remove and re-import and old movie created by another camera

  4. to remove Lightroom and rolling back to the previous version of LR CC (CC 2015 [1014445])-had the advantage of getting rid of the annoying new import dialog screen. -

  5. upgrade to El Capitan to see if maybe OSX update may help.

  
  

  None of them had no effect, can anyone help?
  

  
  

  
  

  
  

  
  

  
  

  Hello

  You're welcome ShawWellPete, I thank you for everything.

  Yes, this person is the windows user, but it was the same question that could have been resolved by quicktime 7. (pending confirmation)

  Try to disable the start-up services and restart the mac and then try: take control of start-up and connection elements. Macworld

  There could be some service startup that is in conflict.

  Concerning

  Jitendra

• ERROR: An error occurred during the installation of assembly component / ERROR: load capacity of third-party installer Adobe_Lightroom_x64.msi failed with exit code: 1603

  During the Installation of LR, I get an error message. Initially, I didn't have enough space for the installation on the boot partition drive. However, now, it should be enough and I rebooted the computer, a couple of times, so I guess that the temporary installation files have been deleted.

  Now, however every time I try to reinstall the software I get the following messages:

  ------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------ ---

  ERROR: An error occurred during the installation of Assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0 X 80070002.

  ERROR: Install payload MSI failed with the error: 1603 - Schwerwiegender Fehler bei der Installation.

  MSI error message: an error occurred during the installation of Assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0 X 80070002.

  ERROR: installer of third party Adobe_Lightroom_x64.msi payload failed with exit code: 1603

  ------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------ ---

  Given that the PS has been installed without problem I refrain from uninstalling the creative cloud and start over.

  Any tips?

  THX

  Claasd5335054 these errors can be found in the event viewer.  It is available through the Administrative Tools Control Panel.