A general error occurred: 18 platform-specific error. Converter 5.5.2 version (1890136)

Similar Questions

• A system 38 platform-specific error general

  Note: I removed the names of specific server on the balls.

  I worked on a P2V a few days with zero success.  The error I get is: a system general 38 platform-specific error.  If I look in vCenter virtual machine will be created and then deleted in about 20 seconds and failed front of 1%.

  The details of the specific server are:

  Windows Server 2008 x 64.

  VMware Converter Standalone 6.0 (I tried version 5.5.3 and 4.1 and exactly the thing happens)

  The first time that I tried this server to P2V does 80ish % and then rebooted.  Since then I get this failure.  I noticed there are a few old files in the data store vSAN referencing this server so I removed this file that has not solved the problem.

  This area of the paper seems to be the part where it fails:

  2015 05-19 T 11: 21:01.345 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: get the drive virtual filebacking [vsanDatastore] ca545b55-ffc5-354a-c334-fc15b4132df0 / < VMNAME > hard

  2015 05-19 T 11: 21:01.345 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: update port nfc as 902

  2015 05-19 T 11: 21:01.345 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: get the Protocol as vpxa-nfcssl

  2015 05-19 T 11: 21:01.345 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / ca545b55-ffc5-354a-c334-fc15b4132df0 [vsanDatastore] /< VMNAME > hard @ < ESXiHOSTNAME >: 902! A3 52 49 48 4 d 8 d f5 c1 - CF 8 a 14 95 3 b 19 78 3d

  2015 05-19 T 11: 21:03.155 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] 'Insufficient Permission to access file' error (error code: 38) child creation in DiskLib

  2015 05-19 T 11: 21:03.264 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] 'Insufficient Permission to access file' error (error code: 38) child creation in DiskLib

  2015 05-19 T 11: 21:03.264 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = default] 38 error disk vpxa-nfcssl of operation: / / [vsanDatastore] ca545b55-ffc5-354a-c334-fc15b4132df0 / < VMNAME > hard @ < ESXiHOSTNAME >: 902! A3 52 49 48 4 d 8 d f5 c1 - CF 8 a 14 95 3d 3 b 19 78.

  2015 05-19 T 11: 21:03.264 - 04:00 WARNING vmware-converter-worker [05232] [sub Originator@6876 = Default] ERROR 38 opening disk drive-2000.

  2015 05-19 T 11: 21:03.264 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] attempt to open disc drive-2000 new [rest 2] (sleep 5 seconds).

  2015 05-19 T 11: 21:08.272 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task 1] reuse existing connection of VIM to < VCENTERNAME >

  2015 05-19 T 11: 21:08.287 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: get the drive virtual filebacking [vsanDatastore] ca545b55-ffc5-354a-c334-fc15b4132df0 / < VMNAME > hard

  2015 05-19 T 11: 21:08.287 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: update port nfc as 902

  2015 05-19 T 11: 21:08.287 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: get the Protocol as vpxa-nfcssl

  2015 05-19 T 11: 21:08.287 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / ca545b55-ffc5-354a-c334-fc15b4132df0 [vsanDatastore] /< VMNAME > hard @ < ESXiHOSTNAME >: 902! 52 c4 4f 5f 39 0 c c3 12-18 2 b 4 c 44 77 75 63 ad

  2015 05-19 T 11: 21:10.035 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] 'Insufficient Permission to access file' error (error code: 38) child creation in DiskLib

  2015 05-19 T 11: 21:10.159 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] 'Insufficient Permission to access file' error (error code: 38) child creation in DiskLib

  2015 05-19 T 11: 21:10.159 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = default] Error 38 opening disk vpxa-nfcssl: / / ca545b55-ffc5-354a-c334-fc15b4132df0 [vsanDatastore] /< VMNAME > hard @ < ESXiHOSTNAME >: 902! 52 c4 4f 5f 39 0 c c3 12-18 2 b 4 c 44 77 75 63 ad.

  2015 05-19 T 11: 21:10.159 - 04:00 WARNING vmware-converter-worker [05232] [sub Originator@6876 = Default] ERROR 38 opening disk drive-2000.

  2015 05-19 T 11: 21:10.159 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] attempt to open disc drive-2000 new [still 1] (sleep for 10 sec).

  2015 05-19 T 11: 21:20.175 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task 1] reuse existing connection of VIM to < VCENTERNAME >

  2015 05-19 T 11: 21:20.206 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: get the drive virtual filebacking [vsanDatastore] ca545b55-ffc5-354a-c334-fc15b4132df0 / < VMNAME > hard

  2015 05-19 T 11: 21:20.206 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: update port nfc as 902

  2015 05-19 T 11: 21:20.206 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: get the Protocol as vpxa-nfcssl

  2015 05-19 T 11: 21:20.206 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = task-1] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / ca545b55-ffc5-354a-c334-fc15b4132df0 [vsanDatastore] /< VMNAME > hard @ < ESXiHOSTNAME >: 902! 52 71 db 6 c 92 78 8 d bf - b8 f7 f6 88 c8 a0 3 c dc

  2015 05-19 T 11: 21:21.969 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] 'Insufficient Permission to access file' error (error code: 38) child creation in DiskLib

  2015 05-19 T 11: 21:22.093 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = Default] 'Insufficient Permission to access file' error (error code: 38) child creation in DiskLib

  2015 05-19 T 11: 21:22.093 - 04:00 info vmware-converter-worker [05232] [sub Originator@6876 = default] Error 38 opening disk vpxa-nfcssl: / / ca545b55-ffc5-354a-c334-fc15b4132df0 [vsanDatastore] /< VMNAME > hard @ < ESXiHOSTNAME >: 902! 52 71 db 6 c 92 78 8 d bf - b8 f7 f6 88 c8 a0 3 c dc.

  2015 05-19 T 11: 21:22.093 - 04:00 WARNING vmware-converter-worker [05232] [sub Originator@6876 = Default] ERROR 38 opening disk drive-2000.

  2015 05-19 T 11: 21:22.093 - 04:00 error vmware-converter-worker [05232] [sub Originator@6876 = task-1] [BaseDiskSetComputer::OpenDiskSet] OpenDisks failed, error mntapi: 609

  2015 05-19 T 11: 21:22.093 - 04:00 error vmware-converter-worker [05232] [sub Originator@6876 = task-1] [BaseDiskSetComputer::AnalyzeErrorAndThrow] error is is produced when opening game of diskettes, MNTAPI_ERROR = 609 MNTAPI errorType = 1, errorCode = 38

  2015 05-19 T 11: 21:22.093 - 04:00 error vmware-converter-worker [05232] [sub Originator@6876 = task-1] AnalyzeErrorAndThrow(): not sufficient permissions to open the file

  2015 05-19 T 11: 21:22.093 - 04:00 error vmware-converter-worker [05232] [sub Originator@6876 = task-1] AnalyzeErrorAndThrow(): errorType platform 1, error code 38

  2015 05-19 T 11: 21:22.093 - 04:00 error vmware-converter-worker [05232] [sub Originator@6876 = task-1] TaskImpl failed with std::Exception: 38 platform-specific error

  I was able to determine that the problem was with installing VMware converter on the operating system.  I ended up uninstalling VMware converter and then by searching the registry for all references to VMware, removing those and also remove all remaining files converter in % allusersprofile%\vmware.

  After a reinstall of VMware converter 6.0 machine converted without problem.

• P2V error: FAILED: an error occurred during conversion: "2338 ' platform-specific error".

  
  Got this message when trying to P2v of Windows 2003 SP2 server on workgroup.   Using the IP address and a local administrator account to connect to the server and the connection to vCenter to add the VM on the host.  The source server is in a workgroup and vCenter server reside in the field, but I can't do a ping from source to vCenter and source of vConverter server and vice versa.   So, doesn't seem to be a firewall issue or the port number.   My account exist on vCenter data center as an administrator, so I should have no problem with permission.

  FAILED: An error occurred during conversion:
  'Platform-specific error 2338'

  Message to: task: Convert physical machine.

  A note more: host of the ESXi 5.0 that I'm trying to place the virtual machine on a double 10G uplinks defined in Full, while the physical server has a 1 G network card.   It is still duplexing of lag, but do not know if it would be a problem here.  Also, am using vCenter Converter standalone ver5.1 to vCenter on ESXi 5.0 5.0 build 1117897.  Configuration standard vSwitch.

  Have tried to locate what means this error and previously paint white.   Any help is appreciated.

  Thank you very much

  I don't know, ports and/or connection settigs could be changed after P2V previsous... check the connection settings, consult the manual.

• Fails at 1% with the error "FAILED: an error occurred during conversion:" "2338' platform-specific error".

  I'm trying to convert a physical Windows Server 2003 Web Edition SP2 with converter (v 5.1) and each time it fails with the error "FAILED: an error occurred during conversion:"2338 ' platform-specific error.

  Some errors in the paper seem to point to a hard disk problem but I defragment the disk and then ran a chkdsk and the disk seems good.

  I appreciate all help.

  Your physical machine cannot access ESX:

  2013-05-25 T 11: 07:26.602 - 05:00 [03816 WARNING 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Unable to connect to the server 10.1.2.18:902

  You must allow the connection between the physical machine and ESX @ port 902.

  HTH

• Platform-specific error 1867

  Hello

  I'm trying to convert your laptop to a VMware Workstation image and I get the error immediately,

  A general error occurred: platform-specific error 1867.

  I can't find anything on this error online... Anyone seen this before?

  Details of the machine

  Lenovo T420s

  Windows 7 Pro x 64

  VMware Converter 5.1.0 build 1087880

  See you soon

  Peter Sheridan

  
  

  What type of drive is the d: drive? There are a few errors on the D: drive:

  2013-06 - 04T 17: 39:36.079 + 09:30 [02924 error 'Default'] cannot determine the amount of free space to import a location "D:\". »

  ...

  2013-06 - 04T 17: 39:58.166 + 09:30 [info 07796 "Default"] error 1867 opening disk D:\t420s.tsh.local\t420s.tsh.local.vmdk.

  Try to use as destination USB or SMB share.

  HTH

• The drive stops at 1% with the platform-specific error 2338

  Hello

  I'm P2V a Windows 2003 server in my vCenter environment 5.1.

  Using Converter Standalone version 5.1.0

  All ports is open I firewalls, but still I get this error:

  FAILED: An error occurred during conversion:

  'Platform-specific error 2338'

  I am attaching a logfile here, so if anyone can help to understand what causes the error, I understand that :)

  When you select a host in a DRS cluster automated, it's the vCenter server who makes the decision what ESX host in the cluster to use. If it's a manual DRS or non - DRS cluster, you can select the specific host. The obvious difference of the user, is that in the latter case there is an extra drop-down box for the selection of the host.

  In fact, it's some sort of bug in user experience, because this difference in behavior is not clear. The guide mentions on 49, but we know not to be cut.

  Kind regards

  Plamen

• PC migration - converter could not connect to the remote computer. A general error occurred: unknown internal error

  Hello

  I am brand new to fusion m v so forgive me if I miss useful information of the first post time around.

  I try to use migrate your PC, feature of VM Fusion 8 but I see the error in the title of the topic when I try to start the import operation.

  I have disabled the firewall on the PC and MAC

  I tried over ethernet and direct connections

  When I run the migration of PC Windows tool, he complains that UAC is enabled even if it is not (confirmed via Control Panel and evolution via the command prompt)

  When you try to migrate, it accepts the PIN and then shows a warning on this certificate, that I choose to browse

  He will then ask admin username/pass on the PC (I tried my only regular and also tried setting a new admin user and try this)

  After that, I see the error: the migration of PC - Converter could not connect to the remote computer. A general error occurred: unknown internal error

  Should I keep trying to get this working, or that it will be more easy to find a way less direct to turn the PC to a virtual machine on the Mac?

  I found the logs on mac and have posted what I think is the appropriate one below, but not really sure:

  LOGS *.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Log for USB VMware pid = 3550 Arbitration Service version 12.1.0 = Build = build-3272237 option = output

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: The process is 64-bit.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host codepage = UTF-8 encoding = UTF-8

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host is Mac OS X 10.10.5 (14F1713), Darwin 14.5.0

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: VTHREAD initialize main thread 3 'usbArb' tid 119357

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: could not open the file "/ Library/Preferences/VMware Fusion/config ': no such file or directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file found in/Library/Preferences/VMware Fusion / config. Using the default values.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / settings ": not a directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file not found at/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings. Using the default values.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / config ': not a directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preferences optional PREF file not found in/dev/null/Non-existing DEFAULT_LIBDIRECTORY / config. Using the default values.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: DictionaryLoad: could not open the file "/ var/root/Library/Preferences/VMware Fusion / config ': no such file or directory.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: Preferences optional PREF file not found in/var/root/Library/Preferences/VMware Fusion / config. Using the default values.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: Deactivation of the preferences of the user PREF because disableUserPreferences is set.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: PREF cannot load the user's preferences.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - PARAMETERS GLOBAL/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - NON PERSISTENT

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - USER PREFERENCES

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - default USER IS/var/root / Library/Preferences/VMware Fusion/config

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - HOST by default IS/Library/Preferences/VMware Fusion/config

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - SITE by default IS/dev/null/Non-existing DEFAULT_LIBDIRECTORY/config

  2016 04-21 T 11: 12:50.091Z | usbArb | I125: USBArbRuleStore: loading rules of "/ Library/Application Support/VMware/usbarb.rules".

  2016 04-21 T 11: 12:50.091Z | usbArb | I125: VMware USB Arbitration Service Version 15.1.7

  2016 04-21 T 11: 12:50.091Z | machPoll | I125: VTHREAD beginning thread 4 'machPoll' tid 119359

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: trying to connect to an arbitrator on/var/run/vmware/usbarbitrator-socket.

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET create new socket, connect to/var/run/vmware/usbarbitrator-socket

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET connection failed, error 2: no such file or directory

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: unable to connect to the existing arbitrator.

  2016 04-21 T 11: 12:50.398Z | usbArb | I125: USBArb: UsbArbPipeConnected: connected to the customer, outlet: 4

  2016 04-21 T 11: 12:50.399Z | usbArb | I125: USBArb: 3450 Client connected (version: 7)

  Well well just in case someone found this one in the future, the question turns out to be that my PC has been joined to a domain, but I was connected to a local account. I solved the problem by leaving the field. There may be other ways to work around this problem.

• Snapshots fail with "a general error has occurred:

  All of a sudden in the last few days, we cannot take snapshots on a handful of our VMs. trying to do so gets to about 90% and finally fails with "a general error has occurred:

  Ive done some research and every result I found that included this error had something after the "has occurred."

  Any thoughts on how to get more information on this or it can be the cause?

  Thank you!

  > Regarding CD-ROM, depending on the vSphere client, it is not currently connected:

  That's right, but it seems that there is a problem with the location of the ISO file, so please set to "Client" CD-ROM drive just for this spread as possible a problem.

  André

• A general error occurred. Found dangling error SSL

  I get the following error message when you try to convert a Windows 2003 server with converter 5: a general error occurred. Found dangling error SSL.

  I read this article http://KB.VMware.com/selfservice/microsites/Search.do?Language=en_US & cmd = displayKC & externalId = 2002296 but to the Phisical DNS server is fine. It can solve all the names I've tried and hosts file that only contains the entry for localhost.

  Also, I can't find messages like these ones:

  [#18] [2011-06-29 10:50:34.904 04732 WARNING "App"] [, 0] [NFC ERROR] NfcNewAuthdConnectionEx: Could not connect pair. Error: Failed to search for host for server host.domain.abc address: no host is unknown
  [#18] [2011-06-29 10:50:34.904 04732 info "App"] [, 0] Error opening 2338 disc vpxa-nfc: / / [VMFS02]

  Any ideas of what I should do?

  The agent log:

  WARNING 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Unable to connect to the server 192.168.128.116:902

  your VC is not visible from the source machine.

• General error has occurred while trying to run the initial Setup Wizard

  Anyone have advice on the implementation of vCOPS?  I have deployed the ovf, use a Pool of IP and configure static ip addresses, I get to the login page (https://< IP > / admin) and when running the Setup Wizard initial on the front page of details of vCenter Server I get a message "General error has occurred", which does not allow me to go further.  Now, I closed the browser to try again and I get a "Virtual Appliance Repair" screen that also fails with a general error has occurred.  Can anyone help solve this?

  The vCOPS unit is version 5.0.1.0 build 677931

  vCenter is version 4.1.0 build 258902

  

  Thank you

  
  Dan

  Looks like you had a communication problem between two virtual machines.

  When you created the IP pool leave you this option disabled?  Also, you associate it with the same network that the virtual machines are connected?

• FAILED: A general error occurred: unknown exception

  Hello
  When I try to convert and join physical machine to VMware ESXi Server Infrastructure I got this error: "FAILURE: a general error occurred: unknown exception.
  There are status "Race" at the moment (but does not show percentage bar) and then "A FAILED" is displayed.
  I've added screen captures and logs as an attachment.
  Please help me

  Youe error is

  2012 04-25 T 11: 34:31.195 + 02:00 [info 01340 'Default'] [, 0] Vmount library: 2 error while opening the control device of the driver VSTOR2

  Try to uninstall and clean install the converter 5.

  If the error occurs again, check the status of the pilot VSTOR: "sc qc vstor2-mntapi10-shared '.

• FAILED: A general error occurred: poweron vm has no

  Hello

  I am trying to create a virtual machine from a physical server fails at 1% compared to VMware vCenter Converter Standalone client with the error:

  FAILED: A general error occurred: poweron vm has no

  Vmware-converter-server-1 log contains the following (lines last 30 or more) below.

  I found a few topics on this error, but they do not work, such as assigning a static IP address above using DHCP.

  Environment:
  VMware Server - ESXi 4.1
  Physical machine - RHEL 5.5
  VMware vCenter Converter Standalone client, version 5.0.0 Build-470252

  Any help is greatly appreciated.

  JOURNAL:

  2012 03-20 T 13: 24:20.570 - 04:00 [info 02452 "Default"] connection to the host on port 443 usmar-bldvmsvr02
  2012 03-20 T 13: 24:20.570 - 04:00 [info 02452 "Default"] at localVersion is: vim.version.version7
  2012 03-20 T 13: 24:20.616 - 04:00 [info 02452 "Default"] remote version is: vim.version.version6
  2012 03-20 T 13: 24:20.632 - 04:00 [info 02452 "Default"] root user authentication
  2012 03-20 T 13: 24:20.648 - 04:00 [info 02452 "Default"] scheduled timer cancelled, succeeds StopKeepAlive
  2012 03-20 T 13: 24:20.663 - 04:00 [info 02452 "Default"] ComputeResource for vim. ResourcePool: ha-root-pool is vim.ComputeResource:ha - computer-res
  2012 03-20 T 13: 24:20.710 - 04:00 [info 02452 ' vmomi.soapStub [57]'] adapter heel of reset for Server TCP:usmar - bldvmsvr02:443: closed
  2012 03-20 T 13: 24:20.710 - 04:00 [info 02452 "Default"] created a new element of Scheduler with id = '12', firstTimeToRun = '2012-03-20 13:24:20.570', source ' ', targetRPOInMinutes = '0 '. -__thiscall Converter::Server:Scheduler:SchedulerItemImpl: ("d:/build/ob/bora-470252/bora/sysimage/ufad/server/scheduler/schedulerItemImpl.cpp:87")
  2012 03-20 T 13: 24:20.710 - Planner element 04:00 [info 02452 "Default"] with id = '12' created - __thiscall int Converter::Server:Scheduler: ("d:/build/ob/bora-470252/bora/sysimage/ufad/server/scheduler/priorityQScheduler.cpp:49")
  2012 03-20 T 13: 24:20.710 - 04:00 [02464 "Default" info] point 12 hourly Planner to run at time = 13:24:20.710 2012-03-20. -Sub __thiscall Converter::Server:Scheduler:SimpleScheduler:Run (void) ("d:/build/ob/bora-470252/bora/sysimage/ufad/server/scheduler/simpleScheduler.cpp:109")
  2012 03-20 T 13: 24:20.741 - 04:00 [info 02484 "Default"] connection to the host on port 443 usmar-bldvmsvr02
  2012 03-20 T 13: 24:20.741 - 04:00 [info 02484 "Default"] at localVersion is: vim.version.version7
  2012 03-20 T 13: 24:20.788 - 04:00 [info 02484 "Default"] remote version is: vim.version.version6
  2012 03-20 T 13: 24:20.788 - 04:00 [info 02484 "Default"] root user authentication
  2012 03-20 T 13: 24:20.820 - 04:00 [info 02484 "Default"] ComputeResource for vim. HostSystem: ha-host is vim.ComputeResource:ha - computer-res
  2012 03-20 T 13: 24:20.820 - 04:00 [info 02484 "Default"] ResourcePool to vim.ComputeResource:ha - computer-res is vim. ResourcePool: ha-root-pool
  2012 03-20 T 13: 24:20.820 - 04:00 [info 02484 "Default"] ComputeResource for vim. ResourcePool: ha-root-pool is vim.ComputeResource:ha - computer-res
  2012 03-20 T 13: 24:20.835 - 04:00 [info 02484 'Default'] data center for vim.ComputeResource:ha - computer-res is vim. Datacenter: ha-datacenter
  2012 03-20 T 13: 24:20.835 - 04:00 [info 02484 'Default'] folder root VM vim. Datacenter: ha-datacenter is vim. File: vm-folder-ha
  2012 03-20 T 13: 24:20.835 - 04:00 [info 02484 "Default"] reuse existing connection of VIM to usmar-bldvmsvr02
  2012 03-20 T 13: 24:20.866 - 04:00 [info 02484 "Default"] scheduled timer cancelled, succeeds StopKeepAlive
  2012 03-20 T 13: 24:20.866 - 04:00 [info 02484 ' vmomi.soapStub [58]'] adapter heel of reset for Server TCP:usmar - bldvmsvr02:443: closed
  2012 03-20 T 13: 24:20.913 - 04:00 [00360 info 'Default'] [task, 338] [task-12] - BEGIN - convert
  2012 03-20 T 13: 24:20.929 - 04:00 [00360 "Default" error] Found dangling SSL error: [0] error:00000001:lib (0): func (0): reason (1)
  2012 03-20 T 13: 24:20.945 - 04:00 [info 02484 "Default"] Started task 'task-12' for job = ' job-12 ", item = '12' - __thiscall Sub Converter::Server:Job:JobProcessorImpl:StartProcessingJobs (void) ("d:/build/ob/bora-470252/bora/sysimage/lib/converter/server/job/jobProcessorImpl.cpp:383").
  2012 03-20 T 13: 24:20.945 - 04:00 [00360 info 'Default'] [taskSpec, 467] task [12] [TaskMap] - 12:task - 23
  2012 03-20 T 13: 24:20.991 - 04:00 [01044 info "Default"] ConverterConnection: KeepAlive timer cancelled, StopKeepAlive succeeded
  2012 03-20 T 13: 24:20.991 - 04:00 [info 01044 ' vmomi.soapStub [55]'] adapter reset for server PIPE:\\.\pipe\vmware-converter-worker-soap heel: closed
  2012 03-20 T 13: 24:28.429 - 04:00 [00360 "Default" error] [task, 350] [LRO] Unexpected Exception: vmodl.fault.SystemError
  2012 03-20 T 13: 24:28.429 - 04:00 [00360 info 'Default'] [task, 379] [task-12] - ERROR - convert: vmodl.fault.SystemError
  -> (vmodl.fault.SystemError) {}
  -> dynamicType = < unset >
  -> faultCause = (vmodl. NULL in MethodFault),
  -> reason = 'poweron vm impossible. "
  -> msg = ""
  ->}
  2012 03-20 T 13: 24:28.429 - 04:00 [00360 info 'Default'] [diagnosticManager, 267] retrieved taskInfo for ' converter.task.Task:task - 12 "mapping to" converter.task.Task:task - 12 "."
  2012 03-20 T 13: 24:28.429 - 04:00 [00360 info 'Default'] [diagnosticManager, 307] the task with id = 'task-12' proved to be a task 'recent '.
  2012 03-20 T 13: 24:28.429 - 04:00 [00360 info 'Default'] [diagnosticManager, 321] no existing group of newspaper found to task with id = "task-12. The task is still 'young' so a bundle of newspapers going now is assigned.
  2012 03-20 T 13: 24:28.429 - 04:00 [00360 info 'Default'] [diagnosticManager, 790] recovery job related diagnostic for the tasks of server with id = "task-12.
  2012 03-20 T 13: 24:28.429 - 04:00 [01036 info "Default"] passage work 0 'job-12' completed with an error. -struct Converter::Server:Job:JobExecutor:SchedulerUpdateSpec __thiscall Converter::Server:Conversion: ("d:/build/ob/bora-470252/bora/sysimage/lib/converter/server/conversion/conversionJobExecutorImpl.cpp:405")
  2012 03-20 T 13: 24:28.444 - 04:00 [01036 info "Default"] suspended 1 elements of Planner for employment (job-12) - __thiscall Sub Converter::Server:Job:JobProcessorImpl:SuspendJobAux(const_class_Converter::Server::Job::InternalJob_&,class_Converter::VdbConnection_&) ("d:/build/ob/bora-470252/bora/sysimage/lib/converter/server/job/jobProcessorImpl.cpp:828")
  2012 03-20 T 13: 24:28.601 - 04:00 [00360 info "Default"] ConverterConnection: KeepAlive timer cancelled, StopKeepAlive succeeded
  2012 03-20 T 13: 24:28.601 - 04:00 [info 00360 ' vmomi.soapStub [59]'] adapter reset for server PIPE:\\.\pipe\vmware-converter-worker-soap heel: closed
  2012 03-20 T 13: 24:28.601 - 04:00 [warning 00360 ' vmomi.soapStub [59]'] termination invocation: moref=vmodl.query.PropertyCollector.Filter:session[5264bd60-de17-d6f4-e798-cb998a3233ed]52f3406e-964c-dea1-c23e-6f30439c2a81 method, server=PIPE:\\.\pipe\vmware-converter-worker-soap = destroy
  2012 03-20 T 13: 25:17.849 - 04:00 [01708 info 'Default'] [diagnosticManager, 343] generate Converter.Server log bundle with no job log.
  2012 03-20 T 13: 25:17.849 - 04:00 [01708 info 'Default'] [diagnosticManager, 370] generate Converter.Server bundle of newspaper.

  "CheckLicenses: ha-license-manager doesn't have a power control.

  This clearly indicates the reason for failure are missing licenses. It may be the number of processors which is not taken in charge or any other resource, not the number of virtual machines under tension.

  Kind regards

  Plamen

• A general error occurred: error [VdbODBCError] - 1

  Hello

  I have Virtual Cener 4.01 on windows 2008 R2 64-bit server.

  I have ESXi hosts with 4.1_update01 patch and have the free db SQL server for the VC

  I was connected to the VC and notived a server has been disconnected.

  So I tried to connect it again and I had "a general error occurred: failed to ... " Error: error[VdbODBCError] (-1) "ODBC error: (40001) - [Microsoft] [ODBC SQL ... " ERROR [42000 "

  I followed http://kb.vmware.com/kb/1003980

  Shrunked the log file and restarted the management agent but still no luck.

  The VM on the server is still online. Can someone please help. Thank you

  The log file has this

  [2011-03-02 15:42:01.247 06116 info ' vmomi.soapStub [4]' opID = 0000003D EE6B6942] Reset Adapter stub server TCP:mnisvmsrv4:443: closed
  [2011-03-02 15:42:01.247 06116 "App" opID error = 0000003D EE6B6942] An unrecoverable problem has occurred, stopping the service of VMware VirtualCenter. : Error [VdbODBCError]-(1) "ODBC error: (42000) - [Microsoft] [SQL Native Client] [SQL Server] could not allocate space for object ' dbo." VPX_HOST_VM_CONFIG_OPTION'. 'PK_VPX_HOST_VM_CONFIG_OPTION' in 'VIM_VCDB' database because the 'PRIMARY' filegroup is full. Create disk space by deleting unnecessary files, removing objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the file group. "is returned when you run the SQL statement ' INSERT INTO VPX_HOST_VM_CONFIG_OPTION WITH (ROWLOCK) (HOST_ID, CONFIG_OPTION_VER, DATA, index_tableau, CONFIG_OPTION_DESC, CREATE_SUPPORTED_FLG, DEFAULT_CONFIG_OPTION_FLG) VALUES (?,?,?,?,?,?,?)".
  [2011-03-02 15:42:01.809 07132 info "App" opID = EE6B6942-00000046] [VpxLRO] - tâche-interne-56---vmodl.query.PropertyCollector.Filter.destroy--FA2F537F-CA34-44A4-95F8-14AAF05BB5B2(909B8829-6F75-42A7-9023-4AFA478ACDE9 BEGIN)
  [2011-03-02 15:42:01.809 07132 info "App" opID = EE6B6942-00000046] [VpxLRO] - spéciale-interne-56---vmodl.query.PropertyCollector.Filter.destroy--FA2F537F-CA34-44A4-95F8-14AAF05BB5B2(909B8829-6F75-42A7-9023-4AFA478ACDE9 FINISH)
  [2011-03-02 15:42:54.927 05640 info "App" opID = EE6B6942-00000048] [VpxLRO] - tâche-interne-57---vim.view.InventoryView.closeFolder--FA2F537F-CA34-44A4-95F8-14AAF05BB5B2(909B8829-6F75-42A7-9023-4AFA478ACDE9 BEGIN)
  [2011-03-02 15:42:54.927 05640 info "App" opID = EE6B6942-00000048] [VpxLRO] - spéciale-interne-57---vim.view.InventoryView.closeFolder--FA2F537F-CA34-44A4-95F8-14AAF05BB5B2(909B8829-6F75-42A7-9023-4AFA478ACDE9 FINISH)
  [2011-03-02 15:42:58.375 06116 info "App" opID = 0000003D EE6B6942] Force the closure of VMware VirtualCenter now

  Hello..

  Don't know the exact reason of why you get this error, but you try to manage a host ESXi 4.1 Update 1 with vCenter 4.0.x?

  If so, this is not supported... Page 3 here http://www.vmware.com/pdf/vsphere4/r40/vsp_compatibility_matrix.pdf

  / Rubeck

• A general error occurred: could not connect with the password of administrator of vim cannot configure VIM account on the host

  Community salvation.

  Story: I was called to look at the configuration of vSphere for a customer. When I started looking, I noticed several problems in the environment of the person who has put in place initially. I've been noting but have done nothing to fix these up to the...

  A question that I've seen is that the server vSphere does not apper communicate properly on ESX 3.5 servers. The error message is similar to a post on this forum ( http://communities.vmware.com/message/1450789?tstart=0) however the same method of solution did not work.

  Currently I have two ESX hosts connected to a console vSphere. The Console displays the disconnected hosts and the error points to the problems with the VPXUSER account. I found

  I searched and found several articles with similar questions, so I chose a course of action

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1007132

  http://communities.VMware.com/message/1168241

  As a note - vSphere client connections toESX welcomes also directly works very well - don't show no problems and everything seems fine.

  So - my first actions were to disconnect and reconnect one of the hosts.  The operation failed with the error "a general error has occurred: unable to connect with the password of administrator of vim cannot configure VIM account on the host. After that, I followed the elimination of the VPXUSER process, restarted the agents and you reconnect the server for vSphere - to the same result. I then deleted the ESX host, removed the VPXUSER, restarted the agents and added that the host ESX back once again - but no change - the same exact error message. I don't see the VPXUSER ID are re-created by this process - so I guess that ESX and vSphere should know the ID and the password.

  Nothing shows up in the var for this - but one of the articles above explains that as a result of the use of the PAM modules.

  Just for fun, I also tried using the ROOT password and reallowing ROOT to connect via SSH - but I got the same failures. I also tried lifting the VPXUSER ID privleges but - same questions.

  If - goes here - any ideas? I can give other details or screen caputres

  ESX3:

  #%PAM-1.0

  1. Automatically generated by esxcfg-auth

  /lib/security/$ISA/pam_unix.so account required

  AUTH required /lib/security/$ISA/pam_env.so

  AUTH sufficient /lib/security/$ISA/pam_unix.so likeauth nullok

  AUTH required /lib/security/$ISA/pam_deny.so

  attempts at password required /lib/security/$ISA/pam_cracklib.so = 3

  shadow md5 password sufficient /lib/security/$ISA/pam_unix.so nullok use_authtok

  /lib/security/$ISA/pam_deny.so password required

  session required /lib/security/$ISA/pam_limits.so

  session required /lib/security/$ISA/pam_unix.so

  ESX4

  #%PAM-1.0

  account required pam_per_user.so /etc/pam.d/login.map

  AUTH required pam_per_user.so /etc/pam.d/login.map

  /etc/pam.d/login.map pam_per_user.so password required

  /etc/pam.d/login.map pam_per_user.so sign in required

  -KjB

• Error: A general error occurred: failure

  Hello

  Get an error on one of my guests in my cluster: "impossible to apply the parameters of resource of DRS to xxxxx host cluster (reason: a general error occurred: failure).

  First of all, I don't know what this refers to? Secondly, where should I look at to fix? When I check the tab tasks, it refers to a virtual machine that I have difficulties to the cancellation of the registration. This is whence the error? If so, how can I delete it?

  Thank you.

  You can enable SSH

  http://www.VM-help.com/esx40i/ESXi_enable_SSH.php