Play action option changes the result of an automated Script.

Similar Questions

• Cannot read media files by clicking on 'Play All' option in the management of the music in any folder that contains media files, even if Windows Media Player is set as default player.

  When I need to play all media files in any folder by clicking on the play all option in the management of the music I do not get windows media player running or set of files I just need to play only one unique file double clicking or by creating a playlist. Very annoying sound play a single every time file. Help, please! Thks

  Can you try to select all files (Ctrl + A) > with the button right, select 'Open with' > select Windows Media Player

  This step will open all the music?
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• where is playing strong option on the new drive to download?

  Where is playing strong option on the new drive to download?

  Hello

  You get this option under the edit in the new MS Reader tab.

  Launch the CD player > go to Edit > read aloud.

  Concerning

  Sukrit diallo

• Dynamic action to change the point label

  Hi all
  
  How can I use dynamic action to change the point label?
  
  Thank you.

  Hello

  I don't think that there is a solution out-of-the-box for it. However, it seems that the Apex 4 correct uses of the elements of the label HTML for labels. So you can use a jQuery selector that is simple to get and manipulate the tag of an element.

  Something like this:

  $('label[for="P1_CUSTOMER_NAME"]').html ("new label");

  Note that there is sometimes a scope nested within the tag tag.

  You can use a type of dynamic action "run the javascript" to do.

  Luis

• After playing a game changes the resolution of the entire screen.

  Original title: display

  Hello.

  2 months ago I bought a new computer (dell Inspiron 15r is).
  everything worked fine, but yesterday I was playing a game in a depression
  resolution because she had taken the late 1920 x 1080.
  Suddenly the games has been closed and my office was small and there was a black border
  on all 4 sides. I have reset the resolution 1920 x 1080 and the Office was ok.
  but whenever I want to play a game in a solution more than 1920 x 1080, the game screen is low
  with black borders on the side of all 4.
  so, how can I play games in a lower resolution, but in full screen?
  thx for your help! :)

  The display depends on the driver control panel

  There should be an option in the software driver to find out what to do on the non optimal resolutions
  Tense (covers the entire screen) / Keep Aspect Ratio (extend the screen without breaking the report l / h) / no change (display will be the size of resolution)

• Creating conditional actions based on the results of the quiz

  I have a quiz at the end of my captivate file and I try to get to show different based on images if you have passed the quiz, or if you failed. For example if you pass, I want to show an image of the tick, and if you do not have an image of the cross, on the results slide.

  I tried to create this by implementing a conditional action. I put the two images on the slide and they hid. Then I have a conditional action value:

  IF
  cpQuizInfoPointsscored greater than or equal to 70

  ACTION

  See the Image_tick

  ON THE OTHER

  See the Image_cross

  When I play the quiz or image shows that I have success or failure (the quiz is set to a 70% pass - there are 10 questions, and all are worth 10 points)
  I am new to Captivate so that any help would be appreciated!
  Thank you

  Each action must be triggered by 'something', which is an event. You must attach to an event, I suspect that the event on enter score slide is one that suits. Select the slide of score, look in the properties panel, tab Actions, perform actions on enter, choose the action.

  In addition, there is a difference between the system variable cpQuizInfoPointsscored and cpInfoPercentage. Personally, I would use the simpler cpQuizInfoPassFail:

  IF cpQuizInfoPassFail is equal to 1

  See the tick

  On the other

  See the cross

  Download the tables in these two articles:

  System variables in Captivate 8/9 - Captivate blog

  Events / Actions (Advanced) - Captivate blog

• Can I add a modal control to an Action without changing the setting?

  In the context of an action, I want to change the resolution of the image. I have this job very well, except that the value that I typed in for the resolution of the image when I implemented the Action is the default whenever the Action runs. For example, I could have typed in 300 when the Action has been registered, and 300 is which appears every time when the Action is executed. I would like to be able to see the actual resolution of the image in question. I tried not to enter any number in the window the size of the Image , but when I do that the action is not registered.

  QUESTION: can I set up a modal control on Image > Image ifze so that when I run the Action and the size of the Image window, all numbers here come from the image, ready for me to crush them?

  Hello

  I think you want to try «Insert Menu Item»... "in the Action Panel flyout (icon at the top right) menu. Remove the Image size command to the current address of your action and use the Menu option Insert... to replace it. When you select it, you will see a dialog box of information (see Insert). Now go to Image > Image size... and it will show this menu item in the dialog box. Now, click OK. When you run the update action, he must get the current settings of the opened document.

• Using Wizard of the Action to change the font in the drop-down list box

  Acrobat Pro DC on a MAC under OS X 10.11.6

  I have a form that is mainly created in Indesign (it works for us - I know that others prefer to locate forms purely in Acrobat).

  I have a script I can run through the wizard of the Action (run a javascript script) to change the font in all fields in text form. But being a novice script that I can not understand how to create a similar script that will change the font used by drop-down list boxes (created in Indesign). Is it possible by a script?

  I know I can do it manually through the properties, but if someone can give me a pointer to find a way to do it with a script that would be amazing!

  Thank you

  The script can be changed to:

  for (var i = 0; i)< numfields;="" i++)="">

  var f = getField (getNthFieldName (i));

  If (f.type = 'text' | f.type = "combobox") {}

  f.textFont = "Arial";

  f.textSize = "10";

  }

  }

  But now I have to ask, what are your reasons to use Arial instead of Helvetica?

• Action to change the border color changes the color of full object instead

  Whenever I try to do an action in which I change the color of the border, the action is not the way that I save it. Instead to change the border color, as I did in the record, the action changes the color of the whole object (for the color that I have saved) and leaves the border to be black.

  Ok. I think that actions make a difference between the stroke and fill. If you have an action to apply a swatch/color, it will apply this color to everything you have 'face' (look at your tool palette: fill overlaps the race?).

  to get what you want, you may need to make a graphic with the fill color style, as you want and use the action to apply instead of the shade.

• Manually change the result of the calculation

  I have a form that I want to be able to manually change the answer to the calculation. The goal is to accept a value calculated, unless the user enters a different value in the calculated field. The calculated value will usually be the desired value, but not always.

  I was almost able to achieve using several fields (that I have that knowledge base of javascript), but there is just one problem where a value appears only a touch later. I know not yet why, as the other field is fine.

  I have attached the form using: https://dl.dropboxusercontent.com/u/11052710/Adobe%20Acrobat/Overriding%20LVEF.pdf

  Hello.

  This topic answers the same question: http://abracadabrapdf.net/forum/index.php/topic, 3009.0.html

  You can download the sample PDF content in the 4th answer here: http://abracadabrapdf.net/forum/index.php?action=dlattach;topic=3009.0;attach=2506

• Action for changing the color mode?

  Is it possible to create an action to change CMYK to RGB color mode in a batch of files? I've been deleting on the creation of this action.

  Thanks in advance.

  Toni

  Use the command for an item of Menu insertion through the menu in the Actions Panel to record this step.

• OBIEE answers I want to change the Result (The specified criteria) No.

  Hello
  Greetings!
  
  
  After the creation of the report for the previous year I get no data is a correct result... instead of give the underside of thing I want to give my own personalized information... How to give that...
  
  pls help me...
  
  No results
  All data is not cause to the specified criteria. This is often caused by the application of filters that are too restrictive or contain incorrect values. Please check your filters to ask and try again. The currently applied filters are listed below.
  
  
  Book type is equal to AA, BA
  and BU Code related entities (MCRP05) is equal to FDC
  and AB exercise (AAAA) is equal to 2009
  and BU product Seg Code (MCRP08) is equal to FD
  Unit type Bus equals 08, 09, 10, 11, 14, 59
  
  
  Kind regards
  Mohan

  Hello

  Add N implies (another view-> No. results) in your layout from Mateur and change the display of Results number and enter your information in the text box.

  Thank you
  Oldia...

  For more information-

  http://bischool.WordPress.com/category/no-results/

  Courtesy of Kishore.

  Thank you
  Oldia...

• Change the size of the resolution and the image does not change the result on the screen?

  
  I use Photoshop CS3. I'm changing the resolution of several images that will be printed in a newspaper. So the current images are 72 dpi and really huge - for example 36 x 27 inches (size of the document), and when I change it to 300 dpi, the size of the image to reduce to about 8 x 6 inches, as I hope. But the image I see on the screen does not change. Thus, for example, when I open the image originally, it's 33% and the entire image is visible. After I change the resolution and the size of the image has changed accordingly, the image appears to be always the same and it remains at 33%. The image should not shrink on the screen because its size has been reduced? Or if she stays the same on the screen, the percentage should not change? I mean if the size of the document is now 8 x 6, it should be able to display at 100% and not to fill my whole screen... I'm so confused. Thank you...

  Gradded,

  The "Size of the Document" of the dialog box size of the Image is just to specify the size (in inches) that your document will be printed. The ppi adjustment has nothing to do with what is displayed on your monitor. Your monitor does not care something about PPI. The monitor contains a number of pixels and after you change this setting, ppp, the monitor will always be the same number of pixels.

  As long as you leave the box "Resampling" disabled, will not change the size of your image (pixel Dimensions). You won't see any change on your monitor. If you check "Resample", then the size (in pixels) of your image will change.

  I hope this helps.

• Text find and change the problem CS3 and CS4 scripts

  I use the script below to find text and turn them into others.

  There is one thing the script can't do it for me.

  Example:

  
  (g) management

  (1) that no law that is adopted in the Cayman Islands, a tax to collect profits, income, gains or satisfaction does apply to the company or its activities; and

  (2) that the above-mentioned tax or any tax in the form of rights of succession or inheritance tax is payable in respect of shares, debentures or other obligations of the company.

  Example: (end)

  I had a lot of subjects or points in the passage. And I want to change the space between '(g)' and 'Management' in a tab character. So I revised the plain text file 1texte.

  PS: 1text.txt is filled with what to change.

  text {findWhat: "^ p(^?)" ' "} {changeTo: "^ p(^?)"} ^ t "} {includeMasterPages:true, includeHiddenLayers:true, includeFootnotes:true, wholeWord:false} search all space-dash-space and replace it with an en dash."

  The result is:

  (^?) ^ tManagement

  (^?) ^ tthat any law that is passed in the Cayman Islands, imposing a tax on profits, income, not capital gains or satisfaction applies to the company or its activities. and

  (^?) ^ tthat the above-mentioned tax or any tax in the form of rights of succession or inheritance tax is payable in respect of shares, debentures or other obligations of the company.

  PS: ^ t is a tab character.

  result (END)

  This is not what I want.

  It should be"(g) ^ tManagement'.

  PS: ^ t is a tab character.

  Please someboady help me out revised the script below to change the text in what I want. Thank you very much.

  Here's the script.

  FindChangeByList.jsx
  An InDesign CS4 JavaScript
  /*
  @@BUILDINFO @ "FindChangeByList.jsx" 2.0.0.0 January 10, 2008
  */
  Loads a series of strings delimited by tab characters from a text file, and then executes a series
  Find/replace operations based on the lines read from the file.
  //
  The data file is delimited by tabs, returns to cart that separates records.
  //
  The format of each record in the file is:
  findType < tab > findProperties < tab > changeProperties < tab > findChangeOptions < tab > description
  //
  Where:
  < tab > is a tab character
  findType is 'text', 'grep' or 'glyph' (this sets the find/replace operation type to use).
  findProperties is a recording of properties (text) search preferences.
  changeProperties is a recording of properties (text) of the change preferences.
  findChangeOptions is a recording of properties (text) of the options find/replace.
  Description is a description of the search/replace operation
  //
  Very simple example:
  text {findWhat: "-"} {changeTo: "^ _"} {includeMasterPages:true, includeHiddenLayers:true, includeFootnotes:true, wholeWord:false} find all double hyphens and replace by an em dash.
  //
  More complex example:
  text {findWhat: ' ^ 9 ^ 9.} {' ^ 9 ^ 9 '} {appliedCharacterStyle: 'price'} {include notes: true, include master pages: true include hidden layers: true, any word: false} find $ 10.00 to $ 99.99 and apply the character style 'price '.
  //
  All metacharacters search InDesign are allowed in the properties 'findWhat' and 'changeTo"findTextPreferences and changeTextPreferences.
  //
  If you enter the backslashes in the object findGrepPreferences findWhat property, they must be "escaped".
  as shown in the example below:
  //
  {"findWhat: '"\\s+ "}
  //
  To learn more about InDesign scripting, go to http://www.adobe.com/products/indesign/scripting/index.html
  or visit the InDesign Scripting user to http://www.adobeforums.com users forum
  //
  main();
  main() {} function
  var myObject;
  Ensure that the interaction of the user (dialog boxes display, etc.) is turned on.
  app.scriptPreferences.userInteractionLevel = UserInteractionLevels.interactWithAll;
  If (app.documents.length > 0) {}
  If (app.selection.length > 0) {}
  {Switch(App.Selection[0].constructor.) Name)}
  case 'PointInsertion ':
  'character ': case
  case "word":
  case 'TextStyleRange ':
  case "line":
  stops of the "Point":
  case "TextColumn":
  case 'text ':
  case "cell":
  case "column":
  case 'Row ':
  case 'Table ':
  myDisplayDialog();
  break;
  by default:
  An option has been selected, but it was not a text object, so look for in the document.
  myFindChangeByList (app.documents.item (0));
  }
  }
  else {}
  Nothing has been selected, then just search for the document.
  myFindChangeByList (app.documents.item (0));
  }
  }
  else {}
  Alert ("no document is open. Please open a document and try again. ») ;
  }
  }
  function myDisplayDialog() {}
  var myObject;
  var myDialog = app.dialogs.add({name:"FindChangeByList"});)
  {with (MyDialog.dialogColumns.Add ())}
  {with (dialogRows.Add ())}
  {with (dialogColumns.Add ())}
  staticTexts.add ({staticLabel: "beach of research :"});})
  }
  var myRangeButtons = radiobuttonGroups.add ();
  {with (myRangeButtons)}
  radiobuttonControls.add ({staticLabel: "Document", checkedState:true});})
  radiobuttonControls.add ({staticLabel: "Selected Story"});
  If (app.selection [0] .silence! = "") {}
  radiobuttonControls.add ({staticLabel: "Sélection", checkedState:true});})
  }
  }
  }
  }
  Ditto var = myDialog.show ();
  if(myResult == true) {}
  {Switch (myRangeButtons.selectedButton)}
  case 0:
  myObject = app.documents.item (0);
  break;
  case 1:
  myObject = app.selection [0] .parentStory;
  break;
  case 2:
  myObject = app.selection [0];
  break;
  }
  myDialog.destroy ();
  myFindChangeByList (myObject);
  }
  else {}
  myDialog.destroy ();
  }
  }
  function myFindChangeByList (myObject) {}
  var myScriptFileName, myFindChangeFile, myFindChangeFileName, myScriptFile, ditto;
  var myFindChangeArray, myFindPreferences, myChangePreferences, myFindLimit, monarticle;
  var myStartCharacter, myEndCharacter;
  var myFindChangeFile = myFindFile("/FindChangeSupport/1test.txt")
  If (myFindChangeFile! = null) {}
  myFindChangeFile = File (myFindChangeFile);
  Ditto var = myFindChangeFile.open ("r", not defined, undefined);
  if(myResult == true) {}
  Loop in find/replace operations.
  {}
  myLine = myFindChangeFile.readln ();
  Ignore blank lines and comment lines.
  If ((myLine.Substring (0.4) == "Text") |) (myLine.substring (0.4) == "grep"). (myLine.substring (0, 5) is "glyph")) {
  myFindChangeArray = myLine.split ("\t");
  The first field in the line is the findType chain.
  myFindType = myFindChangeArray [0];
  The second field in the line is the FindPreferences channel.
  myFindPreferences = myFindChangeArray [1];
  The second field in the line is the ChangePreferences channel.
  myChangePreferences = myFindChangeArray [2];
  The fourth field is the range - used only text find/replace.
  myFindChangeOptions = myFindChangeArray [3];
  {Switch (myFindType)}
  case 'text ':
  myFindText (myObject, myFindPreferences, myChangePreferences, myFindChangeOptions);
  break;
  case "grep":
  myFindGrep (myObject, myFindPreferences, myChangePreferences, myFindChangeOptions);
  break;
  case 'glyph ':
  myFindGlyph (myObject, myFindPreferences, myChangePreferences, myFindChangeOptions);
  break;
  }
  }
  } while(myFindChangeFile.eof == false);
  myFindChangeFile.close ();
  }
  }
  }
  function myFindText (myObject, myFindPreferences, myChangePreferences, myFindChangeOptions) {}
  Reset the preferences of find/replace before each search.
  app.changeTextPreferences = NothingEnum.nothing;
  app.findTextPreferences = NothingEnum.nothing;
  var myString = "app.findTextPreferences.properties =" + myFindPreferences + «;"»»» » ;
  myString += "app.changeTextPreferences.properties =" + myChangePreferences + ";". " » ;
  myString += "app.findChangeTextOptions.properties =" + myFindChangeOptions + ";". " » ;
  app.doScript (myString, ScriptLanguage.javascript);
  myFoundItems = myObject.changeText ();
  Reset the find/change preferences after each search.
  app.changeTextPreferences = NothingEnum.nothing;
  app.findTextPreferences = NothingEnum.nothing;
  }
  function myFindGrep (myObject, myFindPreferences, myChangePreferences, myFindChangeOptions) {}
  Reset the find/change grep preferences before each search.
  app.changeGrepPreferences = NothingEnum.nothing;
  app.findGrepPreferences = NothingEnum.nothing;
  var myString = "app.findGrepPreferences.properties =" + myFindPreferences + «;"»»» » ;
  myString += "app.changeGrepPreferences.properties =" + myChangePreferences + ";". " » ;
  myString += "app.findChangeGrepOptions.properties =" + myFindChangeOptions + ";". " » ;
  app.doScript (myString, ScriptLanguage.javascript);
  var myFoundItems = myObject.changeGrep ();
  Reset grep find/change preferences after each search.
  app.changeGrepPreferences = NothingEnum.nothing;
  app.findGrepPreferences = NothingEnum.nothing;
  }
  function myFindGlyph (myObject, myFindPreferences, myChangePreferences, myFindChangeOptions) {}
  Reset the preferences of glyph in find/replace before each search.
  app.changeGlyphPreferences = NothingEnum.nothing;
  app.findGlyphPreferences = NothingEnum.nothing;
  var myString = "app.findGlyphPreferences.properties =" + myFindPreferences + «;"»»» » ;
  myString += "app.changeGlyphPreferences.properties =" + myChangePreferences + ";". " » ;
  myString += "app.findChangeGlyphOptions.properties =" + myFindChangeOptions + ";". " » ;
  app.doScript (myString, ScriptLanguage.javascript);
  var myFoundItems = myObject.changeGlyph ();
  Reset glyph in find/change preferences after each search.
  app.changeGlyphPreferences = NothingEnum.nothing;
  app.findGlyphPreferences = NothingEnum.nothing;
  }
  function myFindFile (myFilePath) {}
  var myScriptFile = myGetScriptPath();
  var myScriptFile = File (myScriptFile);
  var myScriptFolder = myScriptFile.path;
  CheminMonFichier = myScriptFolder + CheminMonFichier;
  If (queue (CheminMonFichier) .exists == false) {}
  Display a dialog box.
  CheminMonFichier is File.openDialog ("choose the file containing your list find/replace");.
  }
  Return CheminMonFichier;
  }
  function myGetScriptPath() {}
  try {}
  myFile = app.activeScript;
  }
  {catch (MyError)}
  myFile = myError.fileName;
  }
  return myFile;
  }

  I'm not a writer, but I'll take a stab and try to make a difference here.

  The main problem, in my opinion, is that you use a plain text instead of GREP search. Text gross has no provision to replace the text found by itself, for example, rather than using the codes you entered a literal string. Your search text of ' ^ p(^?) ' means find any character in brackets that occurs after a paragraph break. I would use in GREP ^ \s+ (\(.+?\)) which translates to find an opening parenthesis at the beginning of a paragraph (so he'll find if it happens to be the first character in th in a story) followed by a number any characters up to the first parenthesis (in the case where you have double the figures or double entries letter) followed by ANY white space (in the case where it is not an ordinary space or multiple spaces). Replace $1\t which means the text found in the first set of parentheses in query search followed by a tab.

  Parentheses are special in GREP, they surround groups of terms you want to re-use the text found, so looking for the actual characters you need to 'escape' with the-prefix, so \(.+\) will find a paren open followed by all the characters up to the end last paren in the paragraph. Addition of the? After the + makes research stop at the first closing paren met, although there are several sets in the paragraph.

• Public names for the results in a test script

  When we set some attributes as a result in a test script or we should assign public names to these attributes of result should leave those who attribute with system generated public names?

  The reason I ask is if for some reason any public attributes that are generated, the system located in the results, changes its name due to the addition or deletion of rules then those should not influence the results - expected mergers in the real value of the test scripts that are already present in the modules.

  I didn't test this scenario... like my system of cases generated public names remained the same even before after adding a rule to the same document.

  Can we know how OPA decides what public names to automatically generate? I know that generally, the suffix is the name of the document as b4@document1_doc

  The 'view' in issue Edit field has nothing to do with the ID attribute and public names. It's just a matter what text you want to appear on the label in the regression Test report. The only way to have a stable static attribute ID is to add a Public name.

  See you soon,.

  Jasmine