PlayBook signature exception (Beginner)

Similar Questions

• App PlayBook signature does not

  Hello

  I submitted my request about 2 and a half weeks he is shortly thereafter submitted version 1.1 by following the instructions of builder 4.5 Adobe.  Today I received a refusal of my application due to the lack of signature for versions 1.0 and 1.1.  The latter is expected to be signed.  I'll try to go through the process from the beginning again (the form submission, etc.) even though I fear the worst.

  Could someone let me know what I was actually wrong, or what was missing in the file bar?

  Thank you

  Hi ugoano,

  I found and confirmed the new version you submitted has been duly signed this time.  It is approved.

• How can I register multpile pages at a time?

  
  I work from home and I am not always able to get to work time to sign documents for my job allows me to use pdf signature. I have a stack of document 50-70 pages each month requiring my initials on the top corner of each page. I was converting documents to PDF and then signing the top of each page with the e-mail and then e-mailing signature to my work, however, it is very time consuming. so I was wondering if there is a way to sign the corner of each page at a time. my job prints the pages and puts them in the records that as we use it not as an e-document secure so it is not serious, is that each signature, except the last is not valid as long as they are all visible, they belong.

  Let me know if any has any suggestions

  Thank you

  Dani

  What you do isn't really a signature, just a stamp. In Acrobat (not Reader), there are ways I think to all pages of stamps. Once you have marked all pages, you can add an electronic signature if you wish.

• Signature Playbook WebWorks problem request

  1. I created an app PlayBook using WebWorks
  2. I developed my application using Eclipse WebWorks 2.0 plugin.
  3. I have compiled my Eclipse app which produces a file zip "myapp.zip."
  4. I create a my zip file .bar file by running the following at the command prompt:

  "C:\BlackBerry SDK\PlayBook\BlackBerry WebWorks SDK for Tablet 2.0.0.4\bbwp\bbwp.exe" 'C:\Users\myname\workspace\myapp\build\myapp. Zip"o"C:\Users\myname\workspace\myapp\build\Packaged ".

  5. I try to connect the bar file at the command prompt: (password changed)

  ""C:\BlackBerry SDK\PlayBook\BlackBerry WebWorks SDK for Tablet 2.0.0.4\bbwp\blackberry-tablet-sdk\bin\blackberry-signer"- cskpass - verbose mypassword--keystore"C:\Signing Files\MyP12Key.p12"- storepass mypassword C:\Users\myname\workspace\myapp\build\Packaged\myapp.bar" RDK

  I get the following error:

   

  Answer = answer of Signature
  Confirm = null
  Error = Code signing request failed because Application-Development-Mode in manifest is present and is not set [false].
  ]
  barsigner error: Server error: Code signing request failed because Application-Development-Mode in manifest is present and is not set [false].

   

  What is the problem?

  W00T!  I think it was her! There are a few things that are a little unclear.  but I got through it.  I published a blog post with all the instructions (copied) as well as a few notes to make it clearer to my blog.

  Thank you very much for your help Tim!

• Signature of the device Pin showing Null when the Blackberry playbook tablet App

  I'm developing an app for Blackberry playbook in action script. I signed the application (Release version) and it has deployed on the device, but the axis of the device shows null. When I run the application directly from Flash builder it is showing correctly.

  I added the permissions for the config file, is to show the axis of the device, but after his signature for immediate release it shows null.

  Please let me know why it's happening.

  Thanks everyone, I solved the problem. In fact, there were 2 BB.xml file in my project, one containing the access authorization of pin of the device and the other did not have this permission. I removed the redundant .xml file and every thing went very well thanks to help appreciated guys

  

• Problem signature App Playbook with ripple

  I am signing my app playbook with ripple. I use version 2.2.0.5 of the tablet OS SDK.
  I downloaded signature keys and installed them. I was able to generate a signed application.

  However, the second time that I tried to build an application signed, I get the below error. All subsequent attempts to sign the app failed with the same error. The only change that I did between the first and the second was to activate my wireless router I have compiled and signed application push on my test device Playbook automatically via wifi using ripple. I don't see how this would have caused an error like the one below, however. Also, I know that the passwords that I am providing are correct.

  A that someone has had this problem and solved?

  Message: "Oh Snap!" Build request failed with the message: signature [ERROR] failed to the signature on the signature application didn't check the code. The probable cause of this problem is entered a wrong password CSK. »

  To confirm that the password is not really the problem, you can try not to build your application from the command line?

  https://bdsc.webapps.BlackBerry.com/HTML5/documentation/ww_publishing/signing_your_tablet_app_191966...

  You have all non-alphanumeric characters in your password - as a single or double quote?

• Signature of BlackBerry PlayBook in Flash Builder

  Hello

  I really hope this isn't a stupid question. I'm usually quite ingenious, but I can't find an answer anywhere.

  I signed up for my signature keys and received 3 .csi keys. The instructions are for installation on the BB JDE, an eclipse Plugin or a plug-in for Visual Studio.

  I looked the other way on how it works for Flash Builder and they say that I should have gotten 2 files .csj.

  I'm quite confused and would love to test and debug my app on my real PlayBook, but have no idea where to even start.

  Thank you

  Patrick

  Him are sent in different batches, but the lots should be treated near one another (usually in the same time).

  Check your spam filter. Keys up often in in there. If you do not have now, I recommend reorganization.

• Name of the company signature PlayBook with a comma

  I am signing an app webworks for the playbook, and when I ran this:

  . / blackberry-keytool - genkeypair - keystore sigtool.p12 - storepass mypassword - dname "cn = Creative App Design, LLC" - author alias

  I got this error:

  keytool error: java.io.IOException: format Incorrect AVA

  The only way I have found to work around this problem is to enter the name of the enterprise without a comma. This allowed everything runs smoothly until I'm actually trying to sign the app, and I get this message:

  barsigner error: Server error: Code signing request has failed because the developer certificate common name is not [Creative Design LLC App].

  The only thing I can think is that when I signed up for signature keys I registered under the name of the company by a comma, so it won't check when I do not use a comma when generating the key. Do I need to re-register for keys under my name of the society without the comma, although this is not what my actual company name?

  This whole process has been an incredible pain...

  You are right.  Punctuation is not allowed in the CN name, and this name should match what was used when registering for the keys.  You will probably need to get a new set of keys with a simpler of the organization name.

• Eception blackBerry smartphones. Exception when connected to the playbook in presenter view

  I have the BlackBerry Curve 8520, device Os 5.0 bundle 1682, running with bridge blackberry 2.0.0.25. I'm able to go to connect with my playbook successfully.  However, when I use the remote in presenter mode, I get error exception uncaught after some time of work successful.

  Hello!

  Well Yes, there is a problem with OS5 users to the bridge with 2.0.0.25 version.

  But, according to my personal experience, I recommend you to remove the battery and re put back in order to restart your BalckBerry Curve 8520 and also restart your BalckBerry PlayBook as well.

  Go to Bluetooth on your PlayBook and remove existing BlackBerry Curve device ahead of him.

  Now try to connect through bridge by following the usual steps, you know I guess.

  I hope that solves your problem!

  If your problem has been resolved then would you be asked to click 'Like' and accept as a 'Solution' that other advisors invest it times on this Message more.

  Thank you.

• Signature PlayBook problem - 'java' is not recognized as an internal or external command

  Hey guys,.

  I go through the steps of signing up with success until I run bbwp, then I get the following:

  [INFO]                  Parsing of the command line options
  [INFO]                  Bbwp.properties analysis
  [INFO]                  Validation of archive WebWorks
  [INFO]                  The analysis of config.xml
  [INFO]                  The application of filling source
  [INFO]                  Compiling applications WebWorks
  [INFO]                  Packaging of the record bar
  [INFO]                  Bar complete packaging
  [INFO]                  Start signing tool
  'java' is not recognized as an internal or external, order
  operable program or batch file.
  [ERROR]                 Signature failed

  Java is installed and is in my way, sny suggestions?

  Thank you

  -Ryan

  Funily enough a reboot solved the problem.

  These things always happen in times of crisis.

• Bug in signature tool: PlayBook & BB10 WebWorks signature tools create different ID of Package

  Hello, I wanted to download a version BB10 of a portal provider WebWorks app, but I've always had the

  File bundle (blabla.bar) was rejected. Package ID is required for all .bar file. If this is an upgrade, ID of Package must match ID of Package in the bundle of original file.

  error. I read a lot of articles like this one

  http://devBlog.BlackBerry.com/2012/03/package-ID-rejected-by-app-world/#more-8665

  on this issue, and most of them say, you used a different signing key, or you have changed the name of the Package. However none are the case - really.

  What I found is:

  The latest version of the SDK PlayBook WebWorks 2.2.0.5 produced an another Package ID in the MANIFEST. The latest version of the SDK BB10 WebWorks 1.0.2.9 MF file. I use the latest plugin ripple to package and sign applications.

  If I package sign my application with the SDK BB10 bundle file gets rejected. If I package and sign the exact folder of files (not changed character) with WebWorks PlayBook the supplier portal SDK allows me to download the bar.

  When I checked both the MANIFESTO. MF, package-Ids files were indeed different. However this way, you can provide a free upgrade for your existing PlayBook application for BB10 platform.

  Here's your solution, 3rd post http://supportforums.blackberry.com/t5/Web-and-WebWorks-Development/How-to-set-up-Package-Name-for-P...

  It is good that we can specify the name of the package in bb10 sdk.

• [PlayBook] Adobe AIR Exception compilation in SDK 2.0

  Hello everyone.

  I have just intalled SDK 2.0.

  I have install in c:\bbwp2 and copy c:\bbwp files.

  sigtool
  C:\bbw\bbwp\bin

  and

  client - RDK.csj
  C:\bbw\bbwp\blackberry-Tablet-SDK\Bin

  I try to package my project, but I got an error:

  [INFO]                  Parsing of the command line options
  [INFO]                  Bbwp.properties analysis
  [INFO]                  Validation of archive WebWorks
  [INFO]                  The analysis of config.xml
  [INFO]                  The application of filling source
  [INFO]                  Compiling applications WebWorks
  [INFO]                  Packaging of the record bar
  javax.imageio.IIOException: cannot create an ImageInputStream!
  at javax.imageio.ImageIO.read (unknown Source)
  at net.rim.tumbler.airpackager.AirPackager.createSplashscreen(AirPackager.java:566)
  at net.rim.tumbler.airpackager.AirPackager.run(AirPackager.java:118)
  at net.rim.tumbler.WidgetPackager.go(WidgetPackager.java:154)
  at net.rim.tumbler.WidgetPackager.main(WidgetPackager.java:79)
  [ERROR]                 Air conditioner exception occurred

  I Don t has an idea about this.

  Can someone help me?

  Thank you, best regards.

  He tried to compile my project of Webworks for Smartphones. It is config.xsml

  It was that causes the exception, delete it.

• Signature of the App Playbook

  
  

  Hey soulouko,

  I know a lot of people have seen troubled app there signing with Flash Builder (including myself)... .it says it works correctly but is not in fact sign the file of the bar.

  A way to check if your file of BAR was actually signed is open (winrar or any other ZIP tool) and check the META-INF folder, a signed application should have 5 files in there.

  Another way you can do is just sign your application using the line command, which is what I did and it was really simple. Just follow this guide:

  http://supportforums.BlackBerry.com/T5/Tablet-OS-SDK-for-Adobe-Air/useful-tip-package-images-via-com...

  It could be useful, good luck!

• Link HTML Signature colors

  When I create a HTML signature, all my formatting is licensed, except for the colors, I chose for the links.

  Example: I have red selected for a link like www.website.com and when I send the email the website link color is blue. (still, no other blue color)

  How can I get the HTML signature to contain the colors on the links.

  Any suggestions would be greatly appreciated!

  Under Tools/Options/display/colors you have for colors... 'Override' setting? You may have 'Never' to see your specified color.

• one of my email addresses converted to text signatures, others view them as html settings seem to even have, I missed something?

  I have multiple e-mail accounts set up on the same computer (all in thunderbird). As far as I can see the settings for each of them are the same. I got the signature of html email set up for each account and all except an account receives and these display properly in html format. This one account displayed in plain text.
  I went through all the account settings and there is no difference on the offending account.
  Can anyone help please?

  Maybe you use this account to communicate with special correspondents? Is it possible that these specific correspondents are listed in your address book as preferring to send plain text?