Signature Playbook WebWorks problem request

Similar Questions

• Audio player of PlayBook webworks.

  I'm playing the audio data from the system of local files and internet audio stream.

  I tried blackberry.audio.Player method explained in the documentation of the api webworks. I guess the playbook does not have this object installed, because as far as I can see, I'm an exception due to the access to the object not initialized.

  Secondly, I tried jplayer, which uses the music player if html5 html5 extensions are available, and falls to adobe flash player if html5 is not successful. It has always failed...

  Third, I tried the pure html5 player. I can see the commands, the audio length is displayed with '-' value? (I did not understand why?) but no sound.

  I tried the method of second and third in google chrome, it works. Do you have an idea what could be wrong? What is the recommended method for the audio playin?

  Hello

  There was some discussion around this topic on the forums.  The blackberry.audio API is only on the smartphone platform... The PlayBook WebWorks APIs can be found here:

  http://www.BlackBerry.com/developers/docs/WebWorks/API/PlayBook/

  Audio not playing is not in the Simulator is a known problem.  The 0.9.4 Simulator comes not with any codecs to be able to play the video or audio.  This will be corrected in the final RTM version of the Simulator.

• startuprepairV2 with signature of the problem 01: autofailover__

  I have windows vista. Do not start with repair unable to resolve the startup problem. PC just loop around Startup Repair continuously to try to restart again. System Restore does not work and "last good configuration does not work either. Gone through all the options available on the screen, without success, so now completely blocked. Vista installation disc supplied with the machine.
  The problem is listed as:

  Problem event name: startuprepairV2
  Signature of the problem 01: autofailover
  Signature of the problem 02: 6.0.6000.16386.6.0.6000.16386
  03:6 problem signature
  Signature of the 04:1638424 problem
  Signature of the problem 05: no cause root
  Signature of the 06 problem: no cause root
  Signature of the problem 07:0
  Signature of issue 08: 1
  Signature of the 09 problem: System Restore
  Signature of the problem 10:0
  OS version: 6.0.6000.2.0.0.256.1
  locale ID: 1033

  Any ideas?

  How to do a startup repair disk:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Signature of the problem 05: AutoFailover

  Having a problem with Windows 7

  I turned on the machine and everything worked normally. I had to go out for a few minutes and when I got home my screen was empty, but the machine was still on. After checking all the cables, I stopped the power and tried to reload. Function returned monitor but machine entered the Startup Repair. Startup Repair couldn't fix. I tried to restore with no luck. I tried a few suggestions on the forum and no luck. I get the following message:

  Signature of the problem

  Problem event name: StartupRepairOffline

  Signature of the problem 01: 6.1.7600.16385

  Signature of the problem 02: 6.1.7600.16385

  Signature of the problem 03: unknown

  Signature of the 04:21201026 problem

  Signature of the problem 05: AutoFailover

  Signature of the 06:23 problem

  Signature of the problem 07: CorruptFile

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  Any help would be greatly appreciated.

  Hi Gary,.

  Thanks for posting your query in Microsoft Community.

  I appreciate the efforts made in the patches that you tried. From now on, I would ask you refer to the suggestions in the article below and check the status.

  Why my screen is black when I start Windows 7?

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• hasDataCoverage fails for Playbook WebWorks

  Hello

  'HasDataCoverage' should work for Blackberry Playbook Simulator (beta 2)?

  I'm using the SDK WebWorks... and get the error message: "you are not in the coverage, try adding cities later.

  Do I have to activate something else, or if this feature is not enabled on the playbook Simulator.

  Thanx, H.

  PS: Do not know if there is somewhere else to post Playbook & Webworks related research - there is no Tablet OS section for webdev, only for AdobeAir

  hasDataConnection returns true if there is at least one network interface active on the PB. It works fine on a real device. For some reason, the Simulator always returns false. It might be because of the VMware virtual network bridge.

• Windows Media Center error: signature of the problem of additional information about the problem

  Description

  Signature of the problem

  Additional information about the problem

  original title: Windows Media Center in Windows 7 Home Premium

  then, it looks like some Windows Update is causing a problem.
  Two options-
   
  1 do a restore and immediately go into Windows Update and change the setting for
  Download, but let me choose what to install. Then install the updates one
  until you find the one that breaks the system. Do another restore, turn off
  updates and when one appears that is the problem, right-click and then
  Select HIDE this update. Let us know what is the update.
   
  2. you can go in Panel, programs and features, see the installed updates
  Sort by date and uninstall the updates one at a time until you find bad.
  Then set Windows Update to download and install not and notified on the
  updates, right-click to hide. Let us know...
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• How can I get rid of the 2nd line of signature with an email requested line under form after its creation in a widget

  So I created a widget or a hosted form, and after finishing to complete to have a single view of signing, he puts another section or area below which requires another signature and send an article I don't want to have there. It creates another page as well because my original signature line is down.

  Then... How can I get rid of the 2nd line of signature with an email requested line under form after its creation in a widget

  Hello

  By default the Widget to always an email and if you have not added field which, E-Sign would put a signature block (which consists of Email field) at the bottom of the document.

  Kind regards

  -Usman

• Signature PlayBook problem - 'java' is not recognized as an internal or external command

  Hey guys,.

  I go through the steps of signing up with success until I run bbwp, then I get the following:

  [INFO]                  Parsing of the command line options
  [INFO]                  Bbwp.properties analysis
  [INFO]                  Validation of archive WebWorks
  [INFO]                  The analysis of config.xml
  [INFO]                  The application of filling source
  [INFO]                  Compiling applications WebWorks
  [INFO]                  Packaging of the record bar
  [INFO]                  Bar complete packaging
  [INFO]                  Start signing tool
  'java' is not recognized as an internal or external, order
  operable program or batch file.
  [ERROR]                 Signature failed

  Java is installed and is in my way, sny suggestions?

  Thank you

  -Ryan

  Funily enough a reboot solved the problem.

  These things always happen in times of crisis.

• PlayBook - Webworks - Javascript and Jquery problems

  I have problems with my application compiled of Webworks.

  The application works very well "as source" in Firefox and as an AIR with Aptana Studio application.

  However, when I compile files HTML/Javascript app won't compile as expected.

  When using

  onclick="window.open('index.html?foo=bar')"
  

  It gives "network error" (see image below), then that is just opening with a query string.

  The $functions of Jquery get ignored too such as a piece of code like this:

         $(
              function(){
                  loadSelectedFoto();
                  setDiff();
                  loadHs();
                  $( "div.puzzle, p" ).puzzle( memdiv );
              }
              );
  

  Is due to the Webworks Beta status, or I'm doing something that just cannot be done this way (before the supply of PB )

  

  Ah... According to me, that there is a problem, as I also mentioned in the beta... It has since been corrected, but has not yet been published. Stay tuned for an update will be available soon.

  Fundamentally, I believe it's the parameters of query string on the end of the URL, which is the origin of the problem.  For now, you might be able to pass the data through cookies or other means until this bug is released in the next version of beta drop.

  This problem also manifests itself in local applications.  It also affects local AJAX or the filling of an iframe with a local URL that has query string parameters.

• Name of the company signature PlayBook with a comma

  I am signing an app webworks for the playbook, and when I ran this:

  . / blackberry-keytool - genkeypair - keystore sigtool.p12 - storepass mypassword - dname "cn = Creative App Design, LLC" - author alias

  I got this error:

  keytool error: java.io.IOException: format Incorrect AVA

  The only way I have found to work around this problem is to enter the name of the enterprise without a comma. This allowed everything runs smoothly until I'm actually trying to sign the app, and I get this message:

  barsigner error: Server error: Code signing request has failed because the developer certificate common name is not [Creative Design LLC App].

  The only thing I can think is that when I signed up for signature keys I registered under the name of the company by a comma, so it won't check when I do not use a comma when generating the key. Do I need to re-register for keys under my name of the society without the comma, although this is not what my actual company name?

  This whole process has been an incredible pain...

  You are right.  Punctuation is not allowed in the CN name, and this name should match what was used when registering for the keys.  You will probably need to get a new set of keys with a simpler of the organization name.

• PlayBook webworks slow apps

  I have a problem of development for the Playbook with the webworks kit. My applications, although relatively simple in code, are long to load. Background images that are only 50 KB of size can take 5 or 6 seconds. The application crashes so that what is happening. The JSON load this code is also very slow to respond. Tetxboxes with auto fill (jquery) are lag, maybe 5 to 10 seconds.

  In addition, if the same code is run from a web server via the built-in browser, it loads perfectly fine and fast and is very sensitive. Auto complete is perfectly responsive.

  Does anyone know if running applications such as compiled product is somewhat different on the same code running in the web browser?

  Thank you.

  The only thing I could do to improve the loading time is to massively reduce the quality of my images included. This made it more acceptable, about 1-> 2 seconds to load, but I've really had to compromise on the quality of the image.

  I also downplayed all the .js files and obfuscated them as much as possible. All this has helped, but at a reasonable price, I would say. IFrame embedded is much slower than the same page in the standard browser.

  A shame really as the platform that works well.

• [Playbook WebWorks] Behavior of the entry element

  Do not know if Miss me just something, but...

  I am building a little app for HTML/JS/CSS to be compiled by WebWorks in a Playbook application and tested in the Playbook Simulator (v0.9.2).  Essentially, everything looks good, and I love it.

  A very strange situation appeared, however, when I use HTML5elements as a way to select a value.  They make it very well and seem to even work very well themselves.  However, selection/move slider control of range - element in the Playbook Simulator somehow makes all the rest of the page (buttons, etc.) unclickable.  Specifically, buttons subsequently always visually normally respond to clicks, but all scripts attached to their click events (who have done very well before the range element has been addressed) are not executed.

  A double-tap anywhere on the screen of the page / seems to cancel this strange state, and clicks on the new buttons fire their click event handlers.

  This problem does not occur in browsers based on webkit running Windows (for example, Chrome or Safari), just to the WebWorks-setting day running app in the Simulator Playbook.

  Where I am is not clear, I have also attached a sample basic HTML test attempts to illustrate the issue.

  Is it me?  I'm just missing something stupid?  Or...?

  Thank you.

  Thanks for finding this and bring it to our attention.  I think you've discovered a flaw of web rendering engine.  I can confirm that the keyboard does not automatically appear during application development at the entrance to the fields, after interaction with a field in the range.  You can always manually open the keyboard by sliding the left low bevel angle towards the center of the screen.

  You kindly enter this question the developer Issue Tracker: https://www.blackberry.com/jira/secure/Dashboard.jspa so he can get extra visibility?

• System restore failed, registry damaged, signature of the problem 07: O, s is not installed

  It, s a Dell Vista. (Initially WINDOWS 7). Does not start. Comes with Startup Repair tool.

  System restore failed, damaged, registry problem Signature 07: No O, s installed.

  Choice 1 or q: beep.

  Check memory problems: no problem dedected, goes back to the Startup Repair

  Help

  Hello

  1 have had any changes made on the computer before the show?

  2. What is the full and exact error message?

  3. How have you tried to do a system restore?

  Method 1:

  I suggest you to refer to the article and see if it helps:

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem

  http://support.Microsoft.com/kb/934540

  Method 2:

  Check the link and see if it helps:

  Pick up the pieces after a computer crash

  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Let us know if it helps.

• Signature (BB10 webworks)

  I've been using Eclipse and waterfalls and have registered with RIM to sign my apps.

  Keys said they don't have a schedule, so I deleted the emails with the keys, but have backed up my registration of Eclipse.

  How can I now register WebWorks apps? From: Ripple? Command line? The keys to use?

  When you have saved your signature of stunts, he made a ZIP file containing the .p12 and other files. Just unpack and use the same one for your WebWork apps!

• Relational database for PlayBook webworks

  A simple question (I'm scared, I know the answer).

  Can I implement and use a relational database using WebWorks on Playbook? Y at - there no other choice?

  Thank you.

  Yes, you can do it all