Player not approved for table

Similar Questions

• Player not approved

  Hi I have a PS6010xv which is longer under warranty. We have a failure of HARD drive and when we replace it there is an error that the drive is not approved. The failed HARD disk is having the EE06 firmware. the replacement property that has a label EE06, we found the inside to be EE07 firmware. Is it because the version of the firmware is different so that equallogic can't accept, and does perform a work around?

  Re: Joerg you are welcome.  It is covered in the guide of the CLI.

  The berries of the 6xxx series all run the same firmware code.  Only certain firmware Dell/EQL would work with these tables. When you replace a drive, Dell synchronize the revision to match the existing drivers before shipment.  So support the joint drive firmware is a must.

  Possibly with the older firmware table there is a problem.  If this isn't something I've seen in 10 years at EQL.   What firmware are you running on this table?

  First of all, I suggest you try to clear the label, just in case a label of an another RAID array is on the disk.  If that fails, if you can, I remove the drive, restart the table to switch to the passive CM.  Wait 5 minutes, then while logged in, insert the disc.   If you do this on the serial port, you will certainly get messages from the console.   Who might have a clue.

  Questions like these highlight the advantage of having the table under contract.

  Kind regards

  Don

• Document is not approved for this type of device.

  I just ordered an eTextbook from McGraw-Hill, downloaded Adobe Digital Editions and used the link provided by the editor to download the eTextbook link file.  When I open the file I get this error message in the Adobe Digital Editions software: "The Document is not registered for this type of aircraft."

  I am running Windows 7 Professional.

  What should I do here?

  This error means that the book is limited to the display on a single device, and you are the computer that you are trying to view is not in it.   If the error is in the error, then you need to talk to McGraw-Hill, so you can re-download the book.

• The script generation is not supported for Table with XML or UDT column Types

  I get this message trying to generate a script to create a table with an XMLTYPE column.  We use the Oracle Developer Tools for Visual Studio to generate scripts as SQLDeveloper does still not support TFS integration.  He was always pretty easy to generate scripts and maintain control of source code in this way (with the exception of materialized views).  It was great, just right click and generate a script for the project and check it in.  Unfortunately as the adoption of XML grows, we find passage to the SQL Developer more often to perform tasks not supported and then return to the VS IDE to manage source code control.  Free of any chance that it will be supported in the future?

  Yes, our plan is to support several types as time goes by.

  You possibly can speed things along by voting or by filing a request for new feature here:

  http://Apex.Oracle.com/pls/Apex/f?p=18357:46

• Message "this connection is not approved" for each Web site.

  This has happened to me whenever I try to visit almost any Web site. I can't visit the Web site because the connection is 'Untrusted' and site identity 'cannot be verified. This happens with popular sites such as Google, Bing, Youtube, etc. What should I do?

  If parental control is proving to be the question, please see this thread for how to configure Firefox to work with the program: Firefox has issues with the security certificates for yahoo and google when my son connects like a child under one account in windows 10 family.

• A record in the table is not approved

  We have a PS4100x Equallogic in production. A few days ago one of the drives has failed and we ordered an original Dell HDD for this device. When we replaced the damaged for a new, the console says that the disc is not approved.

  We checked the documentation and cannot find that this happens when there are questions of firmware when the drives are not original (who from not Dell) and not alike.

  The other thing is that when I try to add to the table, the "Add table" option is gray out.

  Any help would be grateful, thank you!

  Hello stamac,.

  I'm sorry, but only Dell Equallogic brand work readers in a table EQL.  It is custom firmware on the drive on which the search table.   There is no work around for this.

  Kind regards

  Don

• I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?

  I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?

  It is a decision that was made by Apple.  El Capitan is the newest OSX that will support a 2009 MBP.

  This is not uncommon.  My 2006 MBP came with Tiger, but is limited to OSX Snow Leopard.

  Old hardware ends up by becoming obsolete with newer technology.

  Ciao.

• DVD playback is not enabled for this player (message on the screen)

  I recently bought a new laptop.  It came with windows vista Basic.  When I try to play a dvd with windows media player, you will see a warning message; DVD playback is not enabled for this drive.  The DVD will go ahead and play anyway (I keep x - lying off the warning area), but there is no sound.  I looked in the 'set as default' under the speakers and the sound, but he had no other choice
  available.  So if I could help, it would be greatly appreciated.

  I recently bought a new laptop.  It came with windows vista Basic.  When I try to play a dvd with windows media player, you will see a warning message; DVD playback is not enabled for this drive.  The DVD will go ahead and play anyway (I keep x - lying off the warning area), but there is no sound.  I looked in the 'set as default' under the speakers and the sound, but he had no other choice
  available.  So if I could help, it would be greatly appreciated.

  =================================
  Looks like you'll need a DVD decoder:

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  Or... you could try VLC Media Player:

  VLC Media Player
  http://www.videolan.org/
  John Inzer - MS - MVP - digital media experience

• Adobe Flash Player does not work for 64-bit browser

  If Adobe Flash Player does not work for a 64-bit browser, they should stop the company, because if it doesn't work why bother to use it, I'm good?

  1. use a 32-bit browser
  2 install 64-bit of beta from labs.adobe.com
  3 wait for the release of the 64-bit version of Adobe

  'Maryam Ziad' wrote in the new message: * e-mail address is removed from the privacy... *

  If Adobe Flash Player does not work for a 64-bit browser, they should stop the company, because if it doesn't work why bother to use it, I'm good?

• [ADF, JDev 12.1.3] How to display multiple records on the same page... not in a table but they appear a form for each record

  Hallo,

  I need to create a page that displays the records of a VO, but I would not use a table.

  Instead, I would like to display a form for each record to be displayed.

  Forms must appear one above the other and each form should have 2 buttons: one to remove the file/form itself and one to add a new file/form.

  When you press the button Add a new empty form should be dynamically added to the page (so that the user can fill) and created related record.

  When REMOVE button is pressed the form (which contains the operated button) should be disappear and the record shuould be deleted.

  Creations and destruction must be applied only if the user clicks a button on CONFIRMATION / COMMIT.

  Maybe this http://digilander.libero.it/flattit82/OTN_FILES/MultiFormPage.png picture can help to understand what I want to do.

  You kindly help me?

  Thank you

  Federico

  Hi Federico

  I was saying that your page layout can be achieved using af: table

  See this image:

  

  This provision is af:table (I think same as yours), just add a column in the table and put all the fields in this column then correct layout allows to design as a provision on the form or group layouts

  I'm not saying it's the best approach, but you can try this

  Thank you

• My Flash Player is active for the administrator, but not active for two other users on my computer. How to solve this problem?

  The system is Windows 10.

  Flash Player is not active for two other users using Internet explore and Microsoft Edge.

  Configuration in Internet Explorer

  -Shockwave Flash Object activated

  -ActiveX active filtering

  Edge configuration

  -L' use of Adobe Flash Player is on

  Hello

  We are aware of this issue and are working with Microsoft to resolve the issue.

  --

  Maria

• My player does not allow me to sign a document.  The security setting says not authorized for signatures.  How can I change the security allowed?

  My player does not allow me to sign a document.  The security setting says not authorized for signatures.  How can I change the security allowed?

  You can not. You must have Acrobat and the file password - change for this.

• never flash player will be available for Tables Android and smartphones

  With so many programs and Web sites requiring flash player is still never going to make it available for tables Android and smartphones?

  An update on Android and Flash Player

  The best option at this point is: Puffin browser - fastest mobile browser with Flash support on iPad, iPhone and Android cloud.

• all rows in the table are not eligible for the specified partition

  SQL > Alter Table ABC
  Exchange 2 Partition P1 with Table XYZ;
  
  Modified table.
  
  SQL > Alter Table ABC
  Exchange 2 Partition P2 with Table XYZ;
  
  
  P2 Partition Exchange with XYZ Table
  *
  ERROR on line 2:
  ORA-14099: all rows in the table are not eligible for the specified partition
  
  The exchange partition works fine for the first time. However, if we try to swap the 2nd partition it gives the error.
  How to solve this error?
  How can I find the lines which are not qualified for a specific part. is there a query to find out the same thing?

  >
  Well, exchange of syntax and logic is not clearly as it should (IMHO). There is no element of syntax that tells Oracle we want to Exchange partition data in a table that is not partitioned or not partitioned into partition table data.
  >
  What? Not sure where you got that but maybe it was before you had first cup of coffee? ;)

  An "Exchange", it's just that; an Exchange. Partition data end up in the non-partitioned table and vice versa. It is meaningless and totally obsolete if "we want Exchange partition data in a table that is not partitioned or not partitioned into partition table data".
  >
  It was decided by Oracle not partitioned table control. If the non-partitioned table is empty, it means you want to Exchange data partition in a non-partitioned table. And if not partitioned table is not empty, it means you want to Exchange data in the table that is not partitioned into partition.
  >
  There is no decision to make. The segments are swapped. Oracle doesn't check, know or even care if one or the other or both segments are empty. 'Control' which is carried out (by default except if NO CONTROL is used) only consists of ensuring all the data in the segment intended for the partition belongs to this partition.

  It is what gives the example of John. This can NEVER work if table1 is empty unless p1 is empty at the beginning:
  1 Exchange p1 with table1
  2 Exchange p2 with table1

  As John explains, assuming that no other operations are trying to put the data from p1 P2 which is not possible if p1 actually contains data.

  You can save it for next April 1!

• "Include the header row in the following Pages" does not work for the table

  Hello

  I use the 8.1.2.3337.1.509884 version.

  Pagnation function "include header line in the following Pages" does not work for any table in my design. (the check box cannot be verified little matter how many times I click it)

  I put such table already in a bodypage flow.

  Any reported similar problem?

  Any suggestions?

  Thank you.

  -Vicky

  The only thing I can think is that your table is not in a subform flowed. Who will stop the check boxes.