PlayReady update was Incomplete.You will not be able to watch or record content protected until the is qualified. Everyone I have this same problem and found a solution?
I clean installed 2 x times the RC of windows 7 pro x 64. Both times I got this error in media center. I manually downloaded the playready 1.3 program. I can record my channels satalite with no problems so I don't understand why he repeats the above message. However, I am worried that when the DRM updates for the satalite it won't work and I won't be able to update. I have not changed anything in the hardware level in the computer as so he wouldn't because he thinks it's another computer. Any help would be appreciated.
Clarification on this: summer working on this issue for more than 2 months on 4 computers, that's what I found.
Note: Not all the patches will work on a pc due to various stages of updates, patches, etc. No matter what anyone says or claims. What works for me, the other person or even technical support, may not be due to a strange configuration on your pc. Nevertheless, that's what I did on the final 3 computers that have no auto update of the readyplay.
(1) get to the point in media center it says Readyplay failed to update, you want to try again.
(OPTIONAL) Download the tool from Microsoft DRM Reset, change in Compatibility Mode for Windows 7 (or any version of Windows), run the tool as admin. He must install and say successful.
(2) open Windows "Services" via the control panel > administrative tools > Services.
(3) with Media Center open and show "the PlayReady update was incomplete. Do you want to retry? "Goto Control Panel"Services"you just opened and scroll all the way" Services Windows Media Center Receiver ", double-click it, and then click on"Stop ".
4) navigate to the folder ReadyPlay HIDDEN (C:\ProgramData\Microsoft\PlayReady), and THEN Delete the mspr.hds file.
(5) return to the OPEN & CONTINUES, Media Center and click 'Yes' and 'Next' to the question of the PlayReady update. He should immediately zip past and say update complete & you can watch and record copy-protected blah blah blah. It can also update a guide or something too.
If this doesn't work for you after that 5-6 tests, you have something to another block you, but you don't have need for both 32 bit and 64 bit PlayReady installed to update. This is the 'Service' which is really prevents the update, but simply stop w/o those other steps do not work >.
Good luck!
Tags: Windows
Similar Questions
-
When I run the game, it loads for the first logo of lucas arts, but then does not load all still and go back to windows. The games seems to still be running in the toolbar, but it's just a black screen? Any ideas? I it is game to work once before, but I don't remember any fix specific on how I did it. See you soon
Hey, subtitled.
This seems to be a compatibility issue.
Try changing the compatibility settings.
You can choose to run the program compatibility problems for the same purpose.
To run the troubleshooting program compatibility Troubleshooter
1. open the resolution of the problems of compatibility of programs by clicking the Start button picture of the Start button, click Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under programs, click on run programs for previous versions of Windows.
2. follow the instructions in the troubleshooting.
Reference:
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-WindowsTechnical support (self-help) - Star Wars: Knights of the Old Republic
http://swforums.bioware.com/viewtopic.html?topic=322757&Forum=80
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Original title: follow question Winsows XP repair
I get following messages is displayed when I try to use disk functions. #1 API can not see all CD ROMS in the system, please check to see if they are properly plugged...
#2 disc copy could not find a CD-ROM drive supported. You will not be able to make copies of the disc to another.
Should I take the modem to a computer repair shop to get this repaired?
Hello
I suggest to refer to the procedure described in the following article and check the status of the issue.
Error messages occur when you run Easy CD Creator in Windows XP.
-
What are the causes of the log of user account on missing cursor in Windows XP? I have two trays of office that they have this same problem. If you restart them the cursor returns?
Hi DaddyJeff,
1. don't you make changes before the show?
2. are you referring to the cursor in the area of user password on the login screen of Windows?
3. when the cursor goes missing, the mouse pointer works on screen?It is difficult to say what is causing this problem. If the mouse pointer freezes or stops working, then we recommend you to reinstall the mouse. To do this, try the following steps:
a. sign in to Windows.
b. Click Start, click Run, type devmgmt.msc, and then click ok.
c. in the list of objects, expand mice and other pointing devices.
d. right click on the sub element and click on uninstall.
e. unplug the mouse and plug it back.
f. the Device Manager, select an item in the list, click the Action menu, click scan for hardware changes.
g. check if the mouse is detected, if so, then install it.See mouse USB which is connected to a USB 2.0 hub is not detected by Windows XP
Note: if the problem persists, restore the computer to an earlier time. See How to restore Windows XP to a previous stateVisit our Microsoft answers feedback Forum and let us know what you think.
-
I tried asking chat support and I was told that it was impossible. I need to disable the updates because my school disables updates on the first day of class, and if my updates at home I will be not able to do work between school and home
You can install older versions if you use an older version. but the newer versions (for example, cc 2015) can always post files to open in cc.
If you want to save a file for cs6 install cs6 at home.
-
Has taken my MacBook Pro to repair and they have updated my software, including apparently Firefox. I have FireFox 50.0.2 Mac OS x 10.9.5. Now I no longer get the "Oops!" It's embarrassing"page after a crash or a restart, and when I click on 'restore previous session', Firefox opens again the old pages, which some I no longer need and do not open most of my recent pages. I think I clicked on all the right settings, including "remember my story." Someone knows what to do? Thank you!
You may have corrupted sessionstore file (s). Delete all files sessionstore * and the sessionstore-backups folder.
Type of topic: support in the address bar and press to enter.
Under the logo of the page on the left side, you will see Basics Application. Under this find Profile Folder. To his right, press the button view file. This will open your file for the current profile of Firefox browser. Now close Firefox.
Find the file above. Then rename or delete it. Restart Firefox.
-
I recently started getting this strange message, usually when a Pages document is closed:
«The document _ is on a volume that does not support the permanent version storage.» You can access older versions of this document once you close. »
All my research (apple.com and on the internet) have not enabled all the information on this message.
Hi Larry,
The 'volume' is a hard disk, a partition on a hard drive or a storage as a USB device.
OS X automatically saves your document frequent while you work on it. If the volume of the device / it records on a summer formatted to allow 'versioning', you will be able to use Time Machine to open previous versions of your document. If it has not been formatted like that, you get the message see you, and only the current version of the document will be saved.
Kind regards
Barry
-
My windows clock will not auto sync and I have to manually synchronize the clock. Tablets clock falls almost immediately after be synchronized and it does not automatically sync with time windows but a manual synchronization works very well.
I even made a full recovery, thinking it was corrupt software or associated possible viruses, but the problem persists.
Any ideas would be greatly appreciated.
Hello
Thank you for visiting Microsoft Community.
That by description, you experience the problem with the internet clock won't auto sync but it will manually sync on Windows 7 tablet.
I certainly understand your concern and appreciate very much all your efforts to try to solve this problem.
In order to understand the issue more clearly, I would ask that kindly provide me with the following information.
You did any specific changes before this problem?
Do you receive an error message? If Yes, what is the exact error message and the error code?
What is the make and model of the Windows 7 Tablet?
Since how long you are having this problem?
I suggest you to refer to the steps below and check if that helps.
- Right click on the clock in the taskbar and choose adjust date/time.
- The time tab-click Internet, and then press change settings.
- Delete what is in the server field and replace it with pool.ntp.org.
- Click Update now. In a few seconds, Windows clock must get synchronized.
- Click on OK and then OK again and you're done.
For reference:
You can also see the following article in Microsoft Help below and check if that helps.
Set the clock
http://Windows.Microsoft.com/en-us/Windows/set-clock#1TC=Windows-7
I hope this information is useful.
Please let us know if you need more help, we will be happy to help you.
Thank you.
-
Problem burning a music CD. New pack of music CD CD - R Maxell I have downloaded & torn the music I want to burn fine. I moved all the titles in the burn list. They're sitting there. I clicked on BURN and then put my cd in. At the bottom of the burn - list if I'm supposed to click on the "burn CD" button it not let me and hold on my CD. Help.
Hello
Thank you for writing to Microsoft Communities. I understand that you are unable to burn the music files on the computer.
Until we start troubleshooting on this issue please provides us additional information by answering a few questions, this will help us better solutions to the problems.
1. do you receive an error message when CD burning?
2. do you have a third-party CD/DVD burning software installed on the computer?
3. are you able to burn with other files?
4. what applications do you use to burn music files?
5. What is the format of the file you are trying to burn music?
Please go ahead and follow the steps mentioned and later a update on the State of the question.
Method 1: Try running fix the link.
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
Method 2: Your CD or DVD drive is missing or is not recognized by Windows or other programs: http://support.microsoft.com/kb/314060
Please follow these recommended steps and post if you still experience the problem.
-
I was working on a scenario week last on my PC at home. Yesterday, I tried to loggin to my work computer, and I was asked to reset my password before continuing. I did it according to the instructions, but when I was able to access the history, I found that my script is not there. How can I get it back?
Looks like you worked in the desktop application in the history of offline through your PC at home.
You can check by logging into the desktop app from your home PC and checking if the word "offline" appears after the name of your account at the top right of the story.
If that's true then please switch to online mode.
-
does anyone know how to fix this?
FIleOpen is an add-on for Adobe Reader, used to read protected documents special. It's not made by Adobe. You can visit http://www.fileopen.com/ for info.
-
Data binding will not be able...
I have a piece of code, and it throws the infamous "Databinding will not be able to detect... "Here is the code, alert is thrown to the TextInput statement line. I guess it has something to do with the way the VM creates components and adds event listeners, but I'm not sure. My work current around is to change the includeInLayout and mouseChildren property, but that feels kind of hackers. Any help is greatly appreciated.
...
< fx:Script >
<! [CDATA]
[Bindable (Event = "textStringChange")]
public function get textString (): String
{
return _textString;
}
private var _textString:String;
public function set textString (value: String): void
{
_textString = value;
dispatchEvent (new Event ("textStringChange"));
}
[]] >
< / fx:Script >
< s: states >
< name s: State = "INPUT_STATE" / >
< name s: State = "VIEW_STATE" / >
< / s: states >
"{< s:TextInput text="@{textString} "excludeFrom ="INPUT_STATE"/ > //Warning is up here...
The alert is lifted to the TextInput
I'll go with the simplistic approach and ask why not defining textString as follows:-
[Bindable]
public var textString:String
There is probably a good reason, but you don't talk about...
Is she related to the '@' sign that you added to the link? What is the purpose of using it?
(I know that the previous speaker posed the same question, but I also want to know...)
-
I forgot that automatic updates are included when you update Flash Player. Update was fine, just do not see where to click to get automatic updates. Please let know us if I need to do anything or not. Thank you.
If you use Windows:
You must be connected starting from an administrator account and not a Standard account.
Click START, and then click on control PANEL, while the display is set to large icons not category.
Click the Flash Player icon. The control panel of the Flash drive should appear.
Click the updates tab. Now, you can check or select automatic update.
-
I am user of Lightroom 5. Consider purchase version 6. Not happy with the subscription option, bcs, it looks like a year of use I will not be able to continue to use this version and you want me to pay more to continue to use LightRoom 6. Is this good? If so - I'll stay with Lightroom 5.
You have two options to switch to Lightroom 6:
- Subscribe (including Photoshop CC 2014), or
- Buy the traditional way CS6 upgrade:
Click buy
I want to buy: menu, choose Update (instead of the default is Full)
I own: Photoshop Lightroom 5.x
Make your purchase.
-
I want a solution for the problem I was on Win 7 Pro Service Pack 1 in the links on an open Adobe Acrobat Pro 10.1.12 file will not open in my browser Firefox 33.0.2. The error I get is "Acrobat could not run the web browser. Unknown error. (123).
You can try a repair of your Acrobat installation. Maybe, at least it's a start toward a solution.
Maybe you are looking for
-
Cut icons placed in the custom navigation toolbar
I ' ve customize my navigation toolbar, using the right click - option, to organize the icons I want to customize. " Firefox randomly keeps falling back in the window icons customize, and I have to eventually rebuild the toolbar. It usually occurs as
-
Impossible to activate the WLAN on Satellite A100 (error message)
HI - please excuse me if I'm missing some information here, I'm not used to dealing with computers and don't know all the technical terms! I use my laptop computer for 4 years and never had any internet connection problems. Use wireless this morning,
-
Impossible to install a printer
Im trying to install a c3200 lexmark or a lexmark 1100 two nand jetprinters rpet access denied. When I try to install
-
Player Windows media, windows XP, sound distortion
I just started has a problem with sound is distorted when you play my downloaded music in WMP and audio from YouTube site. It just feels like a vinyl record jumping because of a scratch, etc. The sound also sometimes speeds up. This started yesterd
-
I have a request from the Hotmail team to verify my account or it will be deleted... Is it legitimate since they ask my name, username and password?