Pleasae offers below the configuration of VMware

Similar Questions

• How to refine the configuration of Vmware server on windows host

  Hello

  can someone explain how to refine the Vmware host windows server edition?

  Hello

  First, you decide what you want to use the VMWARE server.

  If you want to use vmware server for only to keep the plane comments at end of test system administartion, during the installation of VMware server you will need to customize your installation.

  In the Customize installation disable the Modules Perl script which are used for development purposes, after installing the server, go to services & disable services unwanted, assume that you use no DHCP & NAT, then disable these services. In doing so, it will save the memory & performance increase of you host mechine.

  When you create your mechine comments try to reduce unwanted devices, how to remove the floppy drive if you don't want to use in the mechine comments. like this, try to reduce the additional devices you use rarely, if you're runnin server edition comments mechines, then try to reduce you is display resolution, which will give a good performance.

  Kind regards

  Jak

• Tool to display the configuration of VMware ESX in a human readable form

  Hello

  I'm looking for a tool to display our configuration of our vSphere hosts.

  Is there a tool available (perhaps thirdparty)?

  Kind regards

  Roland

  If no "hostprofiles" use this https://labs.vmware.com/flings/inventorysnapshot.

  With this tool you can do too much extract configurations and reproduce the same return.

  ~ dGeorgey

• Several areas in the Horizon of VMware View AD

  Hi guys, I want to test creating Pools with 2 Active Directory domains. I have set up my environment as follows:

  
  

  Domain A

  
  

  1. connecting to the server

  Server 2-composer

  3-Security Server

  4 - vCenter Server

  
  

  Domain B

  1. connecting to the server

  2. created a separate account to View Composer

  For now seen Horizon 5.3.2 is fully functional on the field. But I need your help deployment pool using domain B. After you have configured the connection Server (joined to Domain B), I tried to add domain B by using view composer account by logging in to view Admin(Domain A) > Edit vCenter Server > change display composer settings > check server information (under Domain) but I'm 'Bad domain name.

  
  

  You guys please help or send me a link of approval one way of installation which is required for VMware View, so that I can deploy Pool using domain B.

  
  

  Without creating confidence, I added redirector conditional field B on the field which allow me to add domain B without "Bad domain name" pop up. But I don't know what to do next. Anyone can guide me please.

  
  

  Concerning

  Hello

  I've done below the configuration to create 2 different pools where VM is joined to 2 different domains.

  I have Domain A and domain B, having 2 confidence way configured by the AD team.

  I sent 3 win 2 k 8 Server and added to the field.-a. On a single server, I installed vCenter & composer on one server I installed the login server & the other I did the Server fall back to the existing connection server.

  In connect to server, I added vCenter & composer. I have 2 different users who have domain join rights in Domain A and domain B.

  Domain-A\abcUser

  Domain-B\xyzUser

  I added above 2 users in the view composer under domain settings. PFA.

  When creating a pool, in the comments tab customization for users of domain-A, I chose identifier of domain-A\abcUser machine Domain-A and the AD container, which is present in Domina-A place machines.

  for domain B user created another pool, and tab customization of comments, I chose domain-B\xyzuser and the AD container that belongs to the domain B to place machines.

  If you want to add a different machines, you must not deploy a connection/replica server in each domain. Just add the ID domain user under domain composer view tab and choose the right ID when creating the pool.

• IE 9 minor Bug during the Configuration Phase

  • When you click on one of the buttons to Test it snaps back you to the screen "Welcome to vCenter Log Insight."
  • You can click Next return to where you were (without having to re - enter information)
  • Observed the same behavior when you click "Add vCenter Server" for the Configuration of VMware integration phase (when you click Next in this article an empty box is available to fill with vCenter Server information)

  Thanks for reporting this. We will look at a fix. Glad to know that you didn't have to re - enter all the data again in the various screens.

• the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003

  the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003. PFA

  Ranjana,

  Please, review the vminst.log file located in % TEMP and see if we could see related errors.  Otherwise follow the troubleshooting steps below;

  1. check that the guest operating system that you want to install VMware Tools is fully certified.

  2. check that the correct guest operating system is selected

  3. check that the good ISO image is loaded. For more information, see ensuring good ISO image VMware tools is loaded (1003910).

  4. check that the VMware Tools ISO image has not been damaged. For more information, see determine if your VMware Tools ISO image is damaged on a host ESX/ESXi (1004820).

  5. If you are installing a Windows operating system, make sure that you do not encounter problems with your Windows registry database. For more information about the resolution of the problems of register with VMware Tools, see Impossible to upgrade the existing VMware tools (1001354).

  6. If you install on a 64-bit Linux guest OS, make sure that there are no missing dependencies. For more information, see Tools from VMware install fails to start the daemon of guest OS on the operating systems 64-bit Linux with the glibc-common package 32-bit installed (1023185).

  If your problem persists, please refer to: KB VMware: VMware Tools installation problems that are defective in a guest operating system or contact support.

  ~ dGeorgey

• We have configured replication vsphere in our environment and when replication is triggered according to the OFR start us below the questions on the virtual machines that are configured for replication

  Question: We have configured replication vsphere in our environment and when replication is triggered according to the OFR start us below the questions on the virtual machines that are configured for replication.

  Version for esxi: Patch 5.1 level 7

  Virtual center of version 5.1

  Source of storage - IBM v7000

  Destination storage - Hitachi

  
  Questions:
  Events of breach RPO
  Consolidation for the VM disk failure
  Delta abandoned events
  Time change events
  NTFS error and warning (event ID: 137, 57)
  RDP disconnect and ping does matter
  Standby error
  Volsnap error
  Stop the server and offline issue
  Install vmtools emits automatically

  well, in this case, we need to disable the standby of the end of the replication.

  So that everything in triggering replication does not trigger the snapshot of the suspension.

  Then test the if you get these errors.

• The simplest configuration of vmware view?

  Good evening

  We have a small project with 5 desktop computers (= Users) and we think that it would be a good place to test VMware View.

  Unfortunately, it seems that we must implement the 4 servers to serve 5 customers:

  • See connection to the server
    
  • VMWare vCenter Server with View Composer
    
  • ESX Server
    
  • View transfer server
    

  What is the most simple and functional solution for VMware View with 5 users?

  The only software they use is a simple accounting tool that works very well with 100 k of memory...

  We hope that we can install a simple solution like this:

  HP (server) hardware with:

  • ESX Server with:
    
    • 1 x Windows 2008 R2 with Active Directory and the file server
      
    • 1 x Windows 2008 R2 with VMWare View to serve the 5 office users
      

  Unfortunately, there are no pre-sales VMware does support form / email (we hope that there is a customer support).

  Therefore, it would be great if someone can help us to answer this question.

  Thank you very much in advance,

  Kind regards

  Thomas

  I also wonder how this bake-off will go. I hope that the victories of view! In order to achieve this please take a good look at the documentation of the view. I also highly recommend that you take a look at the guide to optimize Windows 7 to see: http://www.vmware.com/files/pdf/VMware-View-OptimizationGuideWindows7-EN.pdf

  This will show you how to build a good image of Win 7 basis for review. Also note that it is strongly recommended that you build your base images starting from zero and NOT P2V them. You can quickly and easily build images for operating systems Windows using MDT 2010 update 1. This tool is free and is Microsoft. I strongly recommend that you take a look. In addition, many optimizations for Win7 and view are also good for use with Xen. Good luck.

• Problem with the start of VMware ESXi 5.0

  I just installed VMware ESXi 5.0 on a new Cisco UCS B200 series blade with two 300 GB hard drives configured in a RAID 1 mirror.  I went through and completed the installation of VMware ESXi 5.0 on this server.  When the installation is complete and the server restarted, he did not initiate the ESXi where I can change the IP address and VLAN.  Instead, I get this text string after the initial boot sequence that is shown in the attachment.  I have a guest who said Shell > do not know why I can not start correctly in ESXi 5.0.  Thank you!  Paul

  Hi Paul,.

  Looks like you boot to the EFI shell. What is the startup policy that you have configured on this server service profile? It should look like the one below.  If there is a problem with the boot order, you should be able to type "EXIT", then enter on the EFI shell to exit the prompt. If your startup is similar to the one below and you still experience this issue, try to downgrade and re - ack the blade.

  Let me know if it helps.

  

• Replaced the SSL appliance - VMware vCenter Support Assistant device certificate

  Hello

  I need replace the certificate in the device wizard helps VMware vCenter but get the error below aa.

  
  

  Key file is empty, it does contain a private key or contained an unsupported key type. Supported key types are PCKS #1 and PKCS #8.

  
  

  However, the official documentation of the product on page 19 is 20 below the procedure.

  
  

  
  

  Replace your vCenter Support Assistant SSL certificate uses a self-signed certificate. You can change your SSL certificate in accordance with the policy of your company for SSL certificates. Procedure

  1 in a Web browser, go to the IP address of the device.

  2. connect the unit to Support Assistant vCenter.

  3 click the tab settings of VA.

  4 under the SSL Configuration, in the private key (.pem) text box, click on choose a file.

  5 in the file browser window, navigate to the directory that contains your certificate, select the private key (*.pem) that corresponds to the certificate chain and click Open.

  VMware, Inc. 19 if your private key is protected by a password in the password key text box, type the password.

  7 in the certificate (.pem, .p7b) string text box, click on choose a file to select your certificate chain file.

  8 in the file browser window, navigate to the directory that contains your certificate chain, select your Certificate SSL (*.pem, *.p7b) chain and click Open. NOTE If you try to add an expired certificate, a warning message indicates that you are not allowed to add the certificate.

  9. click on apply to apply the changes.

  Could someone help me.

  
  

  Hi, peaple.

  After several tries, I had success in the process of exchange of certificate VSA.

  1 - the DNS configuration was wrong.

  2 - certified should be the key (RSA private key format) published the .pem file must be trained using the service certificate + certificate of certification authorities.

• Storage Array Type Config path: ATAS VMW_SATP_SVC does not support the configuration of the path on ESXi 5.0 u1

  Hello

  Below for the output of my blade IBM HS22., are there any problems with the configuration of the path.

  List of paths esxcli storage nmp
  SAS.5005076b08b7aaa4 - sas.a9501097faba7a - naa.600508e0000000007abafa971050a900
  The Runtime name: vmhba0:C1:T1:L0
  Feature: naa.600508e0000000007abafa971050a900
  Full device name: FREE Serial Attached SCSI (naa.600508e0000000007abafa971050a900) drive
  Group status: Active
  Table priority: 0
  Storage Array Type Config path: ATAS VMW_SATP_LOCAL does not support the configuration of the path.
  Path selection policy path Config: {current: Yes; favorite: Yes}

  FC.2fff0000c900009f:2ffd0000c900009f - fc.500507680100 b b 680 680:500507680130 - naa.60050768018105afc000000000000df0
  The Runtime name: vmhba2:C0:T3:L2
  Feature: naa.60050768018105afc000000000000df0
  Full device name: disk of IBM Fibre Channel (naa.60050768018105afc000000000000df0)
  Group status: Active
  Table priority: 0
  Storage Array Type Config path: ATAS VMW_SATP_SVC does not support the configuration of the path.
  Path selection policy path Config: {current: Yes; favorite: Yes}

  Kind regards

  Surya

  Hi Surya,

  No, it's not any problem with the configuration of your path.

  It only means that this policy does not allow additional configuration.

  I.e. with fixed NMP, you would be able to configure a preferred path allowing you to manually distribute the i/o load.

  Your current configuration does not offer this option.

  Kind regards

  Ralf

• Brief, illustrated by the guest is smaller than the configured memory

  Hello

  We organize our virtual machines with the external supplier and asked us to set the virtual host (RHEL) 1024 MB

  At the end of that this has been done, I logged the guest and/cat/meminfo showed less than:

  cat/proc/meminfo

  MemTotal: 896108 kB

  MemFree: 18848 kB

  Buffers: 304120 kB

  Cache: 378700 kB

  SwapCached: 0 kB

  Active principles: 253004 kB

  Inactive: 486740 kB

  HighTotal: 0 kB

  HighFree: 0 kB

  LowTotal: 896108 kB

  LowFree: 18848 kB

  SwapTotal: 2097144 kB

  SwapFree: 2097144 kB

  Sale: 252 kB

  Writeback: 0 kB

  AnonPages: 56932 kB

  Mapped: 14356 kB

  Slab: 120860 kB

  PageTables: 4008 kB

  NFS_Unstable: 0 kB

  Bounce: 0 kB

  CommitLimit: 2545196 kB

  Committed_AS: 149664 kB

  VmallocTotal: 34359738367 kB

  VmallocUsed: 1784 KB

  VmallocChunk: 34359736183 kB

  HugePages_Total: 0

  HugePages_Free: 0

  HugePages_Rsvd: 0

  Hugepagesize: 2048 kB

  I asked supplier what is the reason and that this was their response:

  "Memory is less, on vm servers, because there is an overpass (128-200 MB), which is deducted from the total memory, if you need more RAM you ask accordingly."

  This explanation does not seem right, because I think General cool knowledge happens on the hypervisor and comments should receive all the memory configured, if there are no limits set by resource management policies.

  They sent me a screenshot of VMclient which shows

  Memory: 1024 MB

  Overhead: 104,53 MB

  Use of the memory of the host: 855 MB

  Memory usage comments: 471 MB

  Is there a bad configuration on their side, or am I missing something here?

  There may be a missunderstanding. When you assign 1024Mo to the guest who is the amount of memory the burst enables the OS. Point.

  If you ask me, your provider is pulling on your legs.

  Some useful links:

  http://pubs.VMware.com/vi35/resmgmt/vc_rm__jumpstart.3.3.html

  Find what

  "Memory of the Virtual Machine.

  Each virtual machine consumes memory based on its configured size, more the additional memory overhead for virtualization.

  Configured size.

  The configured size is a building maintained by the virtualization for the VM layer. This is the amount of memory that is presented to the guest operating system, but it is independent of the amount of physical RAM that is allocated to the virtual machine, which depends on the resource (shares, booking, limit) parameters explained below.

  For example, consider a virtual machine with a configured size of 1 GB. When the guest operating system starts, he believes that it is running on a machine with 1 GB of physical memory. The actual amount of memory physical host allocated to the virtual machine depends on its resource settings memory and memory on the host ESX Server contention. In some cases, the virtual machine may charge the full 1 GB. In other cases, he could receive a small stipend. Whatever the actual distribution, the guest operating system continues to behave as if it is running on a machine with 1 GB of physical memory dedicated. "

  here: http://pubs.vmware.com/vi35/resmgmt/vc_basic_mgmt.4.17.html

  AWo

  VCP / VMware vEXPERT 2009

  \[:o]===\[o:]

  = Due to a lack of employees, human beings humans are working here. -Treat it with care, they are rare. =

• Stuck to the configuration of the license server to the virtual Center

  Hi all

  I tried to configure VI3 on my laptop and did almost all the configurations below

  I created as a result of VM on my laptop on Vmware workstation 6.5

  -2 Esx 3.5 Server

  -1 open run VM SAN

  -Center Virtual Win2k3 VM

  Everything is going well so far the esx servers start in 5 minutes and SAN targets are visible. But I don't see the Vmotion option on my virtual Center Server (probably because I n, t configured license server).

  I try to add the file licesnse to the file licsencse on the server of VMware, but still no help. I din, t get any mail from vmware with licenses in so attachment.

  anyidea what can be done here?

  Thanks in advance

  Anuj

  Hello

  Okay, I think that the license server is already there.

  is how to enable vmotion

  in each of your esx hosts

  go to the tab slot-> choose the networking-> click Properties of the vSwitch that is connected to your network vmotion (it must be a network of vmkernal)-> select the vmotion network in the new window and click on edit-> click on the box where it says enable vmotion.

  do this for both servers.

  Ranga

• Inconsistencies and/or documentation issues with the configuration of DTD files

  There seems to be some inconsistencies in the implementation and/or documentation DTD references to use with consistent XML configuration files.
  
  * (1) operational configuration *.
  
  The documentation available in the States [http://wiki.tangosol.com/display/COH35UG/Operational+Configuration+Elements]
  
  "Deployment of Configuration descriptor operational coherence should start with the following DOCTYPE declaration:
  

  <!DOCTYPE coherence PUBLIC "-//Oracle, Inc.//DTD Oracle Coherence 3.5//EN"; "http://www.tangosol.com/dtd/coherence_3_3.dtd">

  -Why the URI refers to the * 3.3* DTD when it comes of a * 3.5* configuration?
  -Is accessible URI? Currently [http://www.tangosol.com/dtd/coherence_3_3.dtd] redirects to [http://www.oracle.com/tangosol/index.html]
  -the operational configuration in coherence.jar references * <! DOCTYPE SYSTEM consistency "coherence.dtd"; > * so it does not follow the documentation
  
  * (2) cache config *.
  
  The documentation available in the States [http://wiki.tangosol.com/display/COH35UG/Cache+Configuration+Elements]
  
  "The Configuration of the Cache descriptor must begin with the following DOCTYPE declaration:
  

  <!DOCTYPE cache-config SYSTEM "cache-config.dtd";>

  -Why is it a different mechanism (SYSTEM rather than PUBLIC) for compared to the operational configuration documentation?
  
  support the Editor * (3) *.
  
  If developers use the recommended syntax (2) editors such as Eclipse cannot provide supported of AutoComplete XML instructions. This is because the XML catalog requires a full URI refer to the DTD.
  
  This is explained in the wiki of the eclipse [http://wiki.eclipse.org/Using_the_XML_Catalog] as follows:
  
  "Note: If your XML document uses a DOCTYPE declaration (as shown below) which specifies a relative URI location (for example ' Invoice.dtd' as opposed to a full URI) then a DTD may * NOT * be registered using 'Invoice.dtd '; the key Id system. »
  
  Based on this problem, there are solutions, but would it not possible to have a complete qualified reference of DTD public? This would facilitate the tools support.
  
  For example, some configuration of base cover problems could be avoided by using code completion in the XML editor.
  
  * (4) support XML schema *.
  
  I noticed that the .NET config files use XML schema (see below), while Java uses DTD.
  

  <cache-config xmlns="http://schemas.tangosol.com/cache">

  This seems to offer benefits in the validation in the DTD. Are there not intend to harmonise this using diagrams for Java also?
  
  Best regards
  
  Phil wheels
  credit suisse

  Hi Phil,

  Thank you very much for this.

  1, 2) fixed - staring with coherence 3.4 must + +.

  (3) seems to be a limitation specific to the eclipse. Other (IDEA, XmlSpy) XML editing tools have no problem with that. I'll check for a work around.

  (4) Yes, we intend to move to schema validation in all areas.

  Kind regards
  Gene

• How can I put the back below the navigation tabs? I don't like a lot of the navigation on the tabs bar. Thank you.

  Versions prior to 29 whether me in about: config to set the tabs under the navigation bar. Now, this configuration no longer works. It's EXTREMELY annoying!

  How can I configure the back legs where they are most useful, below the navigation bar?

  Thank you.

  requested and a 'solution' was published - this thread so that she will not be far off-topic - locking Ed

  I chose to return to version 28 that I really hate version 29. I was faithful to mozilla firefox since I am a computer engineer and have gone through key issues through the years, but quite simply, I do not like version 29 and now, it has become more complicated to simply put the tabs back below.

  I started to use Google Chrome as my default browser, and while I miss some of the Add-ons necessary I widely used on Firefox, I'll give Chrome a run long term to see if it will provide my needs.

  It's sad to be losing Firefox.