Please can someone confirm if I can install Update Manager 6 on 5.5 vCenter

Similar Questions

• You can use Update Manager to install HP marked ESXi 5.0?

  I am running vCenter and Update Manager 5.0 and I have three host machines running the VMware ESX 4.1 U1 edition.  I was thinking of going with the HP install brand because our servers are Proliants.  Can I use the installation of HP ESXi 5.0 through Update Manager?

  As I understand it, once the installation of HP is turned on, I would always install updates for VMware 5.0?

  Someone at - it an entry as to whether using the HP install vs the right VMware one worth?

  Hello

  Yes, you can import the custom HP ESXi ISO 5.0 in Update Manager (in the tab "images ESXi") and create a basic upgrade the host from it. Then you can update your host ESX 4.1 with this baseline.

  I recommend it, because you will not only get the HP drivers update, but also the bundle HP offline (suppliers CIM incl. for the hardware monitoring) installed in this way.

  However, since the image of HP is not at its current level of fix VMware you always install VMware patches after the initial installation.

  -Andreas

• Unable to upgrade to or install Update Manager 5.1.0 Update 2

  Hello

  I have Update Manager 5.1 update 1 installed and working. I've just updated the server vcenter to 5.1.0 Update 2 and now trying to upgrade the VUM to also update 2. During the upgrade it kept failing on the login screen of vCenter vCenter Server username and password entered is not recognized. Now the account works, I logged onto the server vCenter as this account and can connect on the client vSphere under this account. The account is an administrator of vCenter.

  I could not upgrade to work so decided to completely uninstall VUM and reinstall it again with the update 2 version, but I get exactly the same error. I don't know where to go with this. I tried located accounts but no joy. I get the following in the vminst.log: -.

  VMware Update Manager-build-1471702: 18/02/14 11:01:56 - start logging.

  VMware Update Manager-build-1471702: 18/02/14 11:01:56 - CA exec: VMValidateVCServerInfo

  VMware Update Manager-build-1471702: 18/02/14 11:01:56 getting property VC_SERVER_IP = 192.xxx.xxx.xxx

  VMware Update Manager-build-1471702: 18/02/14 11:01:56 getting property VC_SERVER_PORT = 80

  VMware Update Manager-build-1471702: 18/02/14 11:01:56 set property VC_SERVER_ADMIN_USER = domain\username

  VMware Update Manager-build-1471702: 18/02/14 11:01:56 getting property TEMP_DIR = C:\Users\SVC_VC~1\AppData\Local\Temp\

  VMware Update Manager-build-1471702: 18/02/14 11:01:56 AppendPath::done path: C:\Users\SVC_VC~1\AppData\Local\Temp\vum

  VMware Update Manager-build-1471702: 18/02/14 11:01:56 order validation VC: ["v 192.171.185.107 Pei 80 - U 'domain\username' Pei *-C"C:\Users\SVC_VC~1\AppData\Local\Temp\vum\' L-'C:\Users\SVC_VC~1\AppData\Local\Temp\\' vcversion - O""]

  VMware Update Manager-build-1471702: 18/02/14 11:01:56 AppendPath::done path: C:\Users\SVC_VC~1\AppData\Local\Temp\vum\vciInstallUtils.exe

  VMware Update Manager-build-1471702: 18/02/14 11:01:56 found "C:\Users\SVC_VC~1\AppData\Local\Temp\vum\vciInstallUtils.exe".

  VMware Update Manager-build-1471702: 18/02/14 11:02:01 process returned 102

  VMware Update Manager-build-1471702: 18/02/14 11:02:01 error: VC username and password entered is incorrect

  VMware Update Manager-build-1471702: 18/02/14 11:02:01 get the property UILevel = 5

  VMware Update Manager-build-1471702: 18/02/14 11:02:01 updated property ProductName = vSphere VMware Update Manager

  Interestingly, since the upgrade to vCenter 5.1 update 2, our Veeam VM backups started failing. It is said the service account used to connect to vcenter can no longer do. I think that I now have a vCenter problem rather than with single update manager. Of course, I can live without Manager Update for awhile, but not without our Veeam backup.

  Any ideas?

  Thank you

  Janine

  As a result, we actually had major problems with authentication of domain vCenter. All 3rd party plugins did not exist to authenticate (including our Veeam backup) which makes it a little more serious. We could however connect you if one account local existence on the server vCenter himself. We could log on to the server vCenter as a domain account (which is a member of the Administrators group) and then launch the vSphere client, choosing to use "windows session credentials. If we typed in a user and a password that he will not allow you to connect.

  We then looked at logging on to the web client that has failed with an error similar to the following: -.

  The authentication server has returned an unexpected error: ns0:RequestFailed: internal error during the creation of SAML 2.0 token. The error can be caused by a source of identity with a malfunction.

  We could however login to the web client as admin@System-Domain to display the UNIQUE Admin authentication settings and make the necessary changes.

  So we knew now that it was more a problem of SSO. Knowledge base articles has made the removal of the source of the local identity that we were not happy in doing so, we placed a call with VMware. VMware response was to deploy a VAPP 5.5 vCenter to see if version 5.5 of SSO can fix this (we run 5.1), we could go SSO to 5.5. Also, we were not satisfied with this response as the new VAPP and SSO version probably would work it would be a clean install. He has not proved that the exsiting SSO to 5.5 upgrade does not have the same problem.

  We started trawling through the logs and noticed that there are errors in connection to DCs in a trusted domain (us authenticate not to all accounts etc. in this trusted domain). The trusted domain has been listed as a source of identity in the web client, we decided to remove the domain from the list of sources of identity (after consultation with VMware that said that we could remove it but he wouldn't do anything). We do not think it would work, but it did! We discovered since AD team that there were some problems with the trust between our domain and the other domain and we can only think that after restarting the server vCenter for 5.1 installation update 2 that he then picked up on these issues.

  Just thought this may be helpful to anyone experiencing similar problems.

• X 230 (3435-3 MG) Tablet Help please / can install backlight for the keyboard?

  
  

  Yes, your computer supports a backlit keyboard. It's probably easier and cheaper to buy on sites like ebay.

  Also, remove your serial number to view.

• You can help me to get the process ID so I can install updates? I am locked out and have tried to change password and opening new account, but it won't let me past the security or open a new account, because I told that I already have a. New password will

  I can't get through the process ID or change password or by opening a new account. I have only 1 e-mail address. How can I get an account that works?

  This password is presented by your operating system and is designed to prevent you from accidentally installing the software.

  If it comes to your personal computer and you don't need a password to connect to the computer when it first starts, you can probably leave the password blank and click OK to go to this prompt.  If it comes to your personal computer and your normal password does not work, make sure that CAPS LOCK SHIFT is off, and then type the password carefully.

  If this is your work machine and he asks an administrator password, well, you will need to have a conversation with your computer friendly.

  If you are still puzzled, you may need to reset the password on your Mac:

  http://support.Apple.com/kb/PH18653

  http://support.Apple.com/kb/PH14325

  http://support.Apple.com/en-us/HT201240

• What is error code 800719e4 and how to fix it so I can install updates?

  I tried for days install the last update. I run scans, delete everything that is unnecessary, restarted still fails

  I've never had a problem with the updates before

  See the MVP MowGreen response to a previous post, involving the error:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/9b7ea103-09bf-4060-a1a7-e8a8ad9a8805 >

  UTC/GMT is 19:39 on Saturday, October 15, 2011

• Y at - it a registry key to check if the current user can install a windows updates? also, what registry key that is used to verify whether a user is an administrator or not. Thank you...

  Y at - it a registry key to check if the current user can install a windows updates? also, what registry key that is used to verify whether a user is an administrator or not. Thank you...

  There is no need to check the registry keys to see if you can install updates or not.

  You just need to be connected to an administrator account to install the Windows updates.

  You can check if you are in an administrator account by trying taks simple administrattor. For example. Try to change the time system.

  If you can change the time, you are an administrator; no other.

• Error codes: 2 & 80073712 (cannot install updates)

  help me solve the error codes so that I can install updates

  2 error occurs when you install: net 4.0 security updates. To fix it try this:

  Credits go to Control_tps (http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/c9a59504-ae45-49a2-bed4-b8c440a30eac)

  Try the following steps, please:

  1. go in programs and features, click on it.

  2. scroll to the bottom for Microsoft.Net Framework 4 Client Profile, do a right click.

  3. we will give you a choice of uninstall/change, click it.

  4. then it will give a choice to repair, choose repair.  It will take about 4 to 10 minutes to repair (with my PC), your experience may vary.

  5. Once finished, go to your update and new Update Center.

  If not fixed, try to remove .Net Framework 4.0 with .NET Framework Cleanup Tool(http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx ), reinstall it and install the updates.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• error code 641 when installing updates. also having problems with windows install

  have vista Home premium, installed sp2. Could not find a way to reinstall the windows installer. I can't find what code641 is

  Hello Spankyinc,

  Thanks for posting on the Community Forums of Microsoft Vista.

  I recommend to create a system manually, Restore Point so that in this case, a problem occurs when performing these steps, you can always perform a system restore.

  Try to create a new user profile and try to install Windows update and check if the update works fine.

  Create a new user

  1. click on start, type Control userpasswords in the start search box, and then click Control userpasswords in the list programs.

  2. click on manage another account.

  If you are prompted for an administrator password or for confirmation, type the password, or click on allow.

  3. click on create a new account.

  4. in the new account name box, type a name of single-byte characters, click Administrator, and then click on create an account.

  5. click on the user account that you created in step 4.

  6. click on create a password.

  7. in the new password box, type a password, retype the password in the area confirm the new password, type an indication of password in the Type a password hint box, and then click on create password.

  Once you have a new user accounts check if you can install updates.

  Access the link below for more information on how to solve the error message when you try to install Microsoft Update on a Windows Vista-based computer: "cannot install Microsoft Update on the computer.

  http://support.Microsoft.com/kb/933528

  If the steps above fail, access to the link below and run repair to reset the Windows Update components. It could help us solve the problem of Windows Update.
  http://support.Microsoft.com/default.aspx/KB/971058

  Later, download the latest version of Windows install 4.5 on your desktop and try to install it. Install the new version of Windows install could help us solve the problem of the installer that you are facing.

  Link to download Windows install 4.5:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• When I install updated computer then restart successfully

  I have 12 which have been considered important updates waiting to be installed, however I did it twice now and after each attempt that the computer just does not start once the updates have been installed.  It just seems to stop dead.  Then I have to remove the battery to reset the computer completely, then it goes back to a time where he started successfully, but then again wonder to reinstall the same updates.  I don't know what to do, I want to keep everything updated, but something is obviously wrong.  Keep answers as simple as possible, I would not class myself as an expert!

  Hello

  You get the error message?

  Verify that Windows update history for the error.

  Follow the methods below to work on the issue.

  Method 1: Run the fixit from the link below.

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/en-us?EntryPoint=lightbox

   

  Method 2: Perform the clean boot and check if you can install updates.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After you perform a clean boot, perform step 7: reset the computer to start as usual of the above article.

  Method 3: Reset Windows update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 4: If the problem persists, follow the steps in the article.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

• vSphere 6.0 + is not compatible with vmware vsphere Update Manager vcenter you install.

  Hello

  We run with vCenter 6.0 version 6.0.0 build 2997665.

  Installing Update Manager in different windows server with vCenter 6.0 U1 installation media.

  During the installation of Update Manager, it gives below error.

  Error: Vcenter is incompatible with vmware vsphere Update Manager that you are installing.

  Problem has been resolved after downloading installation VC VMware-VIMSetup-all - 6.0.0 - 2800571.iso, which is compatible with running VC build version.

• Where should I install VMWare vCenter Update Manager?

  I have a client vSphere VM (Windows XP), vCenter VM (Win 2003) and 6 Linux server VM on my ESXi server.

  Should I avoid installing Update Manager on a virtual computer on the ESXi server, or if it is not serious?

  I prefer to install on my client vSphere VM, but not sure that this has disadvantages because both the ESXi to-be-implementation to date and the VM Updater-Manager would be the same physical machine.

  Even if the Update Manager is the preferred method, with the environment, you have (1 host, 6 VMs) I would consider updating the host manually (using vihostupdate) and don't even bother with the installation of Update Manager.

  André

• I just install an update of Adobe Reader and find now that I've lost all screen savers. Please can someone explain how I can get them all back!

  I just install an update of Adobe Reader and find now that I've lost all screen savers. Please can someone explain how I can get them all back!

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Please can someone help me with simple instructions on how to play and run and old game back?

  I can't work for the life of me how to play the Pandora Directive, an old game in windows 7.

  I tried the compatibility program, but he has a problem with Vesa?

  Please can someone help?

  Thank you

  Try to install the 3rd party program dosbox. http://www.dosbox.com/ it will emulate a complete enviroiment of ms - dos for the game. If you're playing the support.http://www.gog.com/en/support/ here contact gog.com edition

• Windows Firewall does not start I tried many routes to solve this problem, anyone know how to help I did a lot of different types of suggestions that I read on the net, and I'm still having no luck. Please can someone help?

  Anyway I recently installed a Kaspersky Internet Security2010 trail version, I run Windows Vista, my computer is new, I know that there are no viruses, malware or spyware. However, I have this error code 6801, and I can not turn on the windows firewall. This started after I removed the version Kaspersky track. He also tells me that the associated program does not want to start "Yes or no" of course I tried yes then received this error 6801. I goggled the error and tried different ways to fix this error but still no luck. I'm a bit about computers, I checked the services and his here said automatic but not started. Tried again to start manually and this time it is said ' cannot start Firewall Win, if it comes to a product non-windows then contact suppliers and relay the error 6801.» So please if someone knows something I can do to solve this problem I do not have the disk to reboot vista and I'm losing my mind, I was in it for five days and his crazy wife. Another reason, I would like to correct this problem is I can not use my bitcomet torrent Downloader, I think that this problem of firewall is the problem because everything was going well until the Kaspersky was installed and then my router accidentally disconnected. Sorry for the hike, I'm very frustrated. Just for you all also say that I tried to port forward, with and without static ip and now I think I need to do something about this error until I can fix my bitcomet. I hope that someone takes the time to read this and respond, thanks hope someone soon!

  Visit the kasperersky site... they have the solution you need... Read it yesterday...