When I install updated computer then restart successfully
I have 12 which have been considered important updates waiting to be installed, however I did it twice now and after each attempt that the computer just does not start once the updates have been installed. It just seems to stop dead. Then I have to remove the battery to reset the computer completely, then it goes back to a time where he started successfully, but then again wonder to reinstall the same updates. I don't know what to do, I want to keep everything updated, but something is obviously wrong. Keep answers as simple as possible, I would not class myself as an expert!
Hello
You get the error message?
Verify that Windows update history for the error.
Follow the methods below to work on the issue.
Method 1: Run the fixit from the link below.
The problem with Microsoft Windows Update is not working
http://support.Microsoft.com/mats/windows_update/en-us?EntryPoint=lightbox
Method 2: Perform the clean boot and check if you can install updates.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After you perform a clean boot, perform step 7: reset the computer to start as usual of the above article.
Method 3: Reset Windows update components.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Method 4: If the problem persists, follow the steps in the article.
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
http://support.Microsoft.com/kb/2509997
Tags: Windows
Similar Questions
-
- When windows update (KB968930) power Shell2.0 and WinRm20 for win Vista tries to install the thugs of the computer then restarts and crashes again and again
Hello LisaQuaranto,
I suggest that you configure the computer to start in minimum mode, download the update from the Download Center and try to install the update.
To perform a clean boot on a computer that is running Windows Vista:
a. Click Start, type msconfig in the search box and press ENTER.
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
b. on the general tab, click Selective startup.
c. under Selective startup, clear the check box load startup items.
d. click OK.
e. When prompted, click on restart.
f. after the computer starts, check if the problem is resolved.
If your problem is resolved after the clean boot, and then follow the steps in the following article to narrow down the exact source:
http://support.Microsoft.com/kb/929135
In addition, refer to the section on how to restore your computer to a Normal startup mode by following the steps under "Reset the computer to start as usual", after performing the clean boot troubleshooting.
You can download the update following the link below:
http://support.Microsoft.com/kb/968930
Thank you
Irfan H, Engineer Support Microsoft Answers -
When I install visualfoxpro7.0 then the error "the upgrade patch cannot be installed by the windows service install because the program to be upgraded is may be missing, or the upgrade patch may update a different version of the program." Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch. »
Please solve itHi BL,
The question you posted would be better suited in the Forums of Visual FoxPro. I would recommend posting your query in the Forums of Visual FoxPro.
http://social.msdn.Microsoft.com/forums/EU/visualfoxprogeneral/threads
-
updated computer then error 'WindowsUpdate_80072EFE' always comes if it had for months
and the update itself is "WindowsUpdate_dt000" Please help me! :)Which edition of Windows and what level of Service Pack is now on?
IF it is Vista or Windows 7, open a command prompt
Click the start ORB, type cmd in the search box
Under programs, click on cmd.exe and select 'run as administrator '.
If a password is used to enter it and then click OK. If no p/w is used, click on the button continue
At the command prompt type the following and press enternetsh winhttp see power of Attorney
If there is a proxy used then it will show slot next to Server Proxy (s)
Current WinHTTP Proxy settings:
Server proxy (s):To remove the Proxy Server, at the prompt, type in the following and press enter
netsh winhttp reset proxy
Now type exit, press ENTER to close the command prompt.
See if the system can update now.Proxy is sometimes used if a suite of security or the 3rd party firewall (not the native firewall on Vista/Win7) is installed or if the installed antivirus is configured to analyze incoming e-mails.
MowGreen Services consumer safety update
-
I keep getting failed to install with error codes 643 and 646 on my Vista, when I install updates for Windows... What should I do?
Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
MSXML 4.0 SP @ a security update (KB927978)
A security update for Microsoft XML Core Services 4.0 Service Pack 2 (KB954430)Update for XML Core Services 4.0 Service Pack 2 (KB973688) MicrisiftHe will not update these files each time that I update and then restart my PC, she just asked me to update again please helpHello
· What status appear in the historical versions?
a. Click Start, in the search box, type in update
b. click on windows Update
c. click view update history
Follow the steps from the link that has steps on how to troubleshoot Windows Update or Microsoft Update when you are repeatedly offered an update: http://support.microsoft.com/kb/910339
-
Hi all
I have error codes 80070079 and 8007045 D, have tried to install updates several times without success. They are made to security update & probably really need them. I was able to other updates but not those four for the last month or two. Thanks for your help!
See if this thread is useful.
UTC/GMT is 01:30 on Monday, July 9, 2012
-
Original title: windows does not
I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs
What can I do?
Enter your bios usually with keys F2 or delete to the first powered
Use default Optimize can be the F5 key and save and exit,
Insert your installation disc or flash media and press F8 or F12 to boot on it
Then use the recovery tools to run the Startup Repair tool.
http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7
-
Original title: windows updates
Why, after several months, when checking "installed update history, there are more than 50 copies of 2 updates, KB30744230 and KB307450. Almost daily show several updates for each.
To repeat the Net Framework updates are trying:
http://support.Microsoft.com/kb/976982 -
Vista SP2
Trouble started at the time that I have "resolved" the issue of the update with the .NET 1.1 fixdrjohn64,
Do you ever date, it tries to install? If you go to control panel > programs and features > view installed updates. Do you think those who failed?One thing you can try is to boot your PC and then run Windows Update. Also if you have not run a check for Virus\malware then you should do. Here's a thread that deals with getting rid of items of type malware: get rid of malware
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Whenever I have install update SP3 I restarted mode safe
Whenever I have install the SP3 update I get restarted safely Mode.It no matter what number others updated or I install first. Then. My solution is to say Good bye to MSE and update Windows SP3. Since Microsoft has already ceased support of the SP2 and stop support for SP3 in 2014, SP3 can t be acquired on a computer running SP2.
Original title: will NEVER install SP3
How were you install SP3? Try this way if you don't.If SP3 has been downloaded with a program antivirus or anti-spyware, running, you may have a bad installation.* If the configuration of your antivirus software prevents certain system changing files, SP3 installation may fail. Try temporarily disabling your antivirus software. You can usually do this by double-clicking on the icon for your antivirus program (it usually appears in the lower right of the computer screen) and clicking on disable.* If you disable your antivirus software before you install the service pack, do not forget that you are aware of the risks involved, don't forget to enable it after the service pack is installed.Remove SP3 via Add/Remove Programs, reboot and download and install again. Click on the link below. Do not use the Windows updates. Before you install, disable your antivirus and anti-spyware such as Windows Defender programs. If you are using another firewall, disable and enable Windows Firewall in the control panel for the installation. Once a requires SP3 and working, you can activate the third-party firewall and put the Windows Firewall. Do not keep the two running.Steps to take before you install Windows XP Service Pack 3:
http://support.Microsoft.com:80/kb/950717WinXP SP3 - read all the prerequisites for a successful installation
http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP3-read-all-prerequisites-for-a-successful-installation.aspxRelease notes for Windows XP Service Pack 3
http://download.Microsoft.com/download/c/d/8/cd8cc719-7d5a-40d3-A802-e4057aa8c631/Relnotes.htmDownload Windows XP Service Pack 3 here:
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en -
Lenovo u310, when raid enable the computer is restart auto
Hello
I have lenovo u310, when raid is activating the computer is restart auto
and cannot take the step to enter in the configuration, very fast often resetting.
but when I get home IM disconnect the hard drive I can enter in setup and change comptiable RAID, then im trying to boot blue screen and pc windows it reboot auto.
What is the problem?
Thank you.
OK this is what I've done, raid is not possible, I don't know why...
so I put on compatible and install a fresh Windows 7 from a usb flash drive and it will solve the problem.
-
ERROR MESSAGE WHEN YOU INSTALL UPDATES
"WindowsUpdate_00000001" "WindowsUpdate_dt000"
Above IS THE CODE of ERROR WHEN WINDOWS UPDATE I KEEP TRYING AGAIN, TO no AVAIL.
FRANK WEATHERLY
Hello
· What are the updates that you try to install on your computer?
· What is the version of Windows installed on your computer?
Follow the link to check the updates are being installed.
http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed
Step 1:
You can configure the computer to clean the start state, and then try to install the updates and check if that helps. To configure the boot of the computer follow the link below.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.
Step 2:
Also, you can download the packs of stand-alone for updates and install them manually on your computer and check if that helps.
To download the updates follow the link given below, put in the number of KB to search for the update, and then download and install the same.
http://www.Microsoft.com/downloads/en/default.aspx
Step 3:
You can also try running the fixit in the sub article given
How to reset the Windows Update components?
http://support.Microsoft.com/default.aspx/KB/971058
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
original title: I continue to receive updates for Windows. Updates begin to install fail, updates to day is awarded automatically installation and then the cycle starts again.
This process takes about an hour, during which I can't use the laptop.
Hello
· Update is causing the problem?
· You get the error message?
Method 1:
Try to install the update to the clean boot and check if it helps.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135/en-us
Note: Don't forget to start your machine in normal mode by following step 7 of the link.
Method 2:
You can try temporarily turning on all security software and then try the updates again.
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 3:
Also refer to this article and check if it helps:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
-
all my applications disappeared when I installed updates!
When I installed the updates for my aplications Adobe: InDesign, PhotoShop and Illustrator, they have been deleted!
Now I only seams to be registered whith a license to use them more?
Hello
I suggest you to please go through the steps in the link below, and then try to use the product.
https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html
It will be useful.
Concerning
Maansee
Maybe you are looking for
-
Show my windows and tabs from last time does not not in 14.0.1
Last week, the functionality of Firefox to display the tabs from last time has stopped working. He can't have worked earlier.I can't find any reference to what is a matter of news, but according to the existing guidelines and what I tried, it should
-
How to import photos from an iOS device photos via USB?
I import my photos of iPhone & iPad via USB for pictures on my Mac. I turned off the option to automatically open Photo when I plug my iPhone to Mac, because in most cases, I don't want to import Photos (for example just recharge the phone via the US
-
Updating BIOS for Satellite 1625CDT with XP Pro
OK, I bought a new 256 MB of ram, when tried install it requested update of the bios. I find the update of the correct bios for her. When I try to update the bios, it is said that it can be run in 98 and 2000, I have xp pro. I also tried to start exp
-
[Call of duty 4 crashes in Windows 8]
my call of duty 4 doesent work by winning 8. It gives me this message at a random time:iw3mp.exe has stopped working I tried googeling and found some ansers that dident work on my pc. http://en.kioskea.NET/FAQ/4482-COD-4-crashes-iw3mp-exe-has-stopped
-
Cannot authorize Digital Editions - says could not connect to the activation server
I use Adobe Digital Editions 4.5 on a Windows 7 computer.I was using Adobe Digital Edition to read library books, then decided to allow if I could access my library of books about elsewhere. I downloaded a few books, and then I started having authent