Please guide on how to integrate ATG with RTD (real-time decisions.

Similar Questions

• Can you please guide me how whatsapp will connect even though the proxy?

  We are using the internet security and acceleration 2006 server.we are faced with a question, when we connect whatsapp in mobile through proxy server, it does not connect. Can you please guide me how whatsapp will connect even though the proxy.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Hello! I do a menu print of tarp for a round table, I did this from ms word since I have no idea where can we make a semicircle menu upside. My problem is that it has a very low resolution, please help me how to print possibly with 3' table

  Hello! I do a menu print of tarp for a round table, I did this from ms word since I have no idea where can we make a semicircle menu upside. My problem is that it has a very low resolution, please help me how to print possibly with 3' round table. Thank you

  Oh dear.  It turned into a terrible mess of a thread with opinions and advice.    You do your layout with Word.  In my experience, Word is a nightmare when it comes to positioning many areas of text and images.

  You shouldn't have changed the Word document in a JPG file, because the text all which perfectly progressive, which would be printed to "all" size without loss of image quality, then became an image file.  But if you "had" to make it a JPG, just about the worst possible way to do this is with the Snipping Tool, because the resulting image would have only the resolution of your computer screen.  Dows following?

  How big are the pictures you used in Word?  They probably didn't need to be very large, because each image is only an impression at a relatively small size.

  First thing to try is to open the Word Document and save in PDF format using the Standard option (after you select Save as PDF

  It will keep the text in the form of scalable vector objects which allows printing at any size.  However, I don't have the knowledge of how Word uses images.  I just did a little test, and while I could zoom in to see in the text, I'm not sure that the same is true of the images.  Depends on word refers to the image of the player, or he brings as an object of frame size, and I suspect it's the latter.  You need to do some research on it, because it might make you save a lot of time.

  You have Publisher?  Editor certainly reference the drive images, and friezer downsize to fit the page.  I suspect that you can import a Word into Publisher document, which would put you best part of the way with it.  I would like to test it, but I use it as a loyal user of Adobe InDesign.   If you are forced to restart, then editor or InDesign would be lot better, but it's doable with Photohop.  Just make sure that you start with enough pixels, which means 36 inches at 300 dpi or 10 000 square pixels.  When did save as PDF using the preset high quality printing, and ask your color printer (probably just use sRGB)

  Good luck

  

• How is it you can't use more than 126 GB of a 1.5 TB with LabVIEW Real-time hard drive?

  How is it you can't use more than 126 GB of a 1.5 TB with LabVIEW Real-time hard drive?
   
  It's only 8.3% of disk space!

  http://digital.NI.com/public.nsf/allkb/E7E2F5657B6026358625750B007201A6?OpenDocument

  The national Instrument is reformat that you drive less than 126 GB or replace the drive with a less than this size.

  Please OR tell me you go fix your LabVIEW Real Time soon, and that we will not have to wait for LabVIEW RT 9.2.1 in 2011 for this one to fix.

  http://upload.wikimedia.org/Wikipedia/Commons/9/90/Hard_drive_capacity_over_time.svg

  Readers as high as 126 GB or more have been around since mid-2002.  It's about 7 years now and LabVIEW Real-time STILL cannot use greater than 126 GB drives!  Please OR.  Do something.

  We deserve the patches for older versions of LabVIEW RT.  What about updates to LabVIEW RT.  As 7.0.2 7.1.2 7.6.2, 8.0.2, 8.2.2, 8.6.2.

  We don't need new features or versions of LabVIEW RT as 9.0 until we have some of the bugs fixed in existing versions.

  Kevin.

  
  

• How can I chat with a real person again?

  How can I chat with a real person again?

  Hello Kitty kat,

  Please visit the following link to contact Support of Adobe Chat: contact customer service

  Kind regards

  Tanuj

• How to integrate Xml with OFA Editor?

  How the report to integrate Xml Publisher with the OA Framework?
  
  Thank you
  Kumar

  Hello

  Refer

  http://apps2fusion.com/at/51-PS/260-integrating-XML-Publisher-and-OA-framework

  http://oraclearea51.com/articles/64-OAF-Beginners-Guide/236-integration-of-XML-Publisher-with-OAF-generating-output-in-PDF-MSWord-MSExcel-and-HTML-format.html

  -Anand

• How ti integrate JSP with OBI EE page

  Hello
  
  Can you please let me know how to integrate the OBI ee 10.1.3.2.1 and production JSP page, we use IIS as the web server.
  
  Also please let me know with web server it is compatible.
  
  
  Thanks in advance.
  Siva

  Once again you are being quite clear, that means "to call these the OBI dashboard JSP pages" eactly mean? Do you just want to connect in a dashboard? It's easy to do, just add a link in your dashboard design. JSP pages do not work in IIS, so you will need a JSP server to run. Your environment of Dev/UAT must match the Production...

• How to integrate HFM with Hyperion Planning?

  Hello

  I was wondering how we integrate between the HFM and Hyperion Planning?

  I'll use HFM to consolidate different companies and then I'll use Hyperion Planning at the consolidated level generated by the HFM.

  But I don't know how does this technically happen? We use the FDQM to collect the data from different sources and to consolidate in the HFM? I can't find what is the backend of the HFM... I read somewhere that it is not based on essbase... so please advise.

  And so, how connect the HFM planning or it will load the HFM data to plan the Hyperion/essbase?

  Please tell us in this integration as I am confused in it.

  Thank you.

  There are several ways to extract data from HFM and loading of planning/Essbase.

  Some options are ODI, Extended Analytics (now export data), EPMA, EAL data synchronization (even if it was only Essbase)

  If you search the Internet you can get examples for example

  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/Hyp/HFM11.1.2_ExAnalytics/Extended_Any.htm

  http://www.us-analytics.com/wp-content/uploads/2013/07/kberry.gettingyourdataoutofhfm.PDF

  HFM stores its data in a relational database.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• How to make the variable data record (intermittent time), with a real-time display

  I'm a complete newbie to Labview. We are currently developing a piece of hardware in the lab to automatically take the readings of the concentration of a sample, through correlations with voltage readings. I have read and worked through the getting started with Labview .pdf, but other than that my knowledge is minimal. I have a flowsheet of work who is able to do it correctly and display and write the data in real time. However, I want to be able to write to a file only every 10 minutes or so, since experiments can run for several days and the amount of data it currently logs is unnecessary.

  Would be nice if he could write it in columns like this:

  [date time]  [voltage ave]  [levels]

  xx                     xx                        xxx

  xx                     xx                        xxx

  xx                     xx                        xxx

  .. .but only once every 10 minutes. Or at any interval of time, I put.

  I tried to connect different parallel loops, but I failed miserably. I don't know if it is a relatively simple problem for you guys to help me with.

  I have attatched file. Please note that the file variables.txt is there simply to hold the settings for the correlation of concentration, which took charge of him.

  In addition, advice or tips to improve this would be greatly appreciated.

  Hi mooray.

  I took a quick look at your code, but you should be able to do something like this:

  

  When you have an Express VI elapsed time set to 600 seconds (10 minutes). If every 600 seconds time out will pass a Boolean TRUE, which will allow to write the measurement file Express VI. Therefore, what iteration of the while loop, you would write some input comes in the signal input to write it into a file position.

  There are other ways to do this as well, but it's pretty simple. I hope this helps!

  Thanks for choosing National instruments.

  Aaron P

  National Instruments

  Technical sales engineer

  http://www.NI.com/support

• How to copy a file in real time each 5minus from a PC to another PC via LAN network?

  Hello Labviewers,

  Is it possible can labview auto copy drop every 5 minutes from PC1 to another PC in real time?

  Say in the laboratory classroom I have PC1 labview run in real time, collecting data dump in the folder c:\test\testing.xslx

  Then in my Office PC how can copy file in PC1 every 5 minutes. Is it possible Labview is possible? Please help me IV thanks

  How about something like this?

  First map a network location to a 'reader' in Windows.

  Then just use LabVIEW primitive file copy to copy the file.

  Wait five minutes.

  Do it again.

  

  Yes, it's the bare minimum, and probably not the best way to do as you can't stop the loop with the stop button once the period has begun. But you can see it's pretty simple, if all what you need to do is to copy a file and location, you can map.

• using NI USB 9201 with LabVIEW Real-time

  Hello

  I try to use a USB of NI 9201 on a remote real-time target. Here's what I did: 1) tricked out of a desktop PC to serve as target RT using the instructions provided on the Web site of NOR. He now starts in an RTOS with LabView RTOS 9.0. (2) I communicated successfully with the help of a host computer that has a windows with LabView 2009 BONE and I installed the software from the computer remote RT target host using ethernet. However, my problem is when I plug NI 9201 USB on the target RT that I do not see the material listed on the devices tab in MAX and interfaces on remote systems. I tried to get the manuals for the HW 9201, but it seems not much explained here, or maybe I'm looking in the wrong places. Any help is greatly appreciated.

  PS: I am attaching 2 JPEGs for additional explanations (tab network settings and the settings of the system).

  Thanks in advance,

  Benoit.

  AVS,

  9201 USB is not supported on RTPCs please visit this link. Currently no usb-DAQ devices do not support an environment CRPC. Only the PCI DAQ devices are supported.

  http://zone.NI.com/DevZone/CDA/tut/p/ID/6913

• Application errors of the RT with the PXI-4461 with Labview real-time 9.0.1, DAQmx 9.0.2

  HI -.

  I recently converted a PXI time system real OS (PXI-1042 q chassis, controller PXI-8187, DAQ, PXI-4461, DAQ, PXI-6259). I can write and run DAQmx applications in real time with the 6259 very well. Whenever I try to write a labview RT app to use the 4461, however, it will fail. Note that I can use two cards through MAX I tried switching card slots, just in case it was a problem. Both cards worked with labview, the PXI chassis was before Windows.

  Attached are pictures of the screw base demo I built to show the problem. Since I was a mistake (-200758) if I started from the raw strings, I tried to create a MAX task and use it. The task, but he complained of a buffer is too small. I explicitly put the buffer to work around this problem and still get the same error (-200608). I've also attached a screenshot of the software currently on the Max MAX RT PXI system is version 4.6.2 btw. (I installed the most/all this from DS1 Dev Suite 2010 version).

  Please let me know if I hurt something installed, versions if 4461 just don't play nice with the new BT or RT software, or if something is wrong. Thank you.

  Kregg

  The first error you see is (details in the help-> error explain in LV)

• The 1473R CAN be used with the real-time operating system of NOR?

  Hello, I am trying to determine if I can use the OR 1473R framegrabber PCIe FPGA in a PC based computer time real OS OR. Anyone know if this is possible? So I think that it should appear to the OS in real-time as a target FPGA that can transfer the data via DMA, but I wanted to make sure the drivers would work in real time of NEITHER.

  I appreciate any info on this!

  lukepike,

  Yes, you can use this device with real-time OS of NOR.

• Robotics/control system with LabView real-time + OR DAQ

  Hello

  I am building this real time application in which you can try control methods for a particular system (construction of the algorithm of control in LabView on Windows) and then with a DAQ board (I have the E-Series SCB-68) communicate with the hardware (actuators).

  Is this DAQ card enough or should I try with any other advice? For the application considered, it is important that the price of the freq is at least 1 kHz.

  Thanks in advance

  The 6220's card perfectly fine for your current application.  It is true that windows is not deterministic and cannot compete with the hardware/software in real time, but your DAQ will be responsible for the management of timing and synchronization you will be fine.  If the advance until you need a very quick response in real time of your application, you can always buy a RT LV system.

• How to plot several points in real-time on a XY chart in different colors?

  Hello

  I am a beginner of labview.  Here is a screenshot of the program. It provides information in real time to a patient when walking from their foot position, random target (points Exchange with each step) and a reference point (constant).  At present, data from three points are grouped in the same plot on the graph XY.  In the graphics property, when I change the color for field 0, every color change.  I tried to connect the XY graph in table built above, but a cut wire it occurs (connected 2 groups with different content).

  Any help would be great!  Thank you

  Amarcher wrote:

  Thank you.  I tried to change the plots in properties, but it did not work.

  Here's what you can do with very minor changes. It is basically the same as in my previous example.