Please help a newbie!

Similar Questions

• Please help a newbie with a video make the problem!

  IM new to After Effects, so please forgive if this is a silly question.

  
  I have an Animation of edge with a background color of #ffa800

  I imported a video after affects that has a transparent background.

  Research tells me that the video is never really transparent, so I'm creating a solid layer in AE, placing video on it and setting the blend mode 'screen '.

  I now have a video with a background color of the #ffa800.

  However, when I export / view the video output and import in my project of edge to animate the background color of the video is disabled and does not match my background of edge animate.

  I spent all day experimenting with different export made direct EI options and also through Media encode. IM now completely stumped.

  I also tried setting the video background color #ffa800 and masking then my video. It keeps me from having to use a "screen" blend mode, but I get the same exact results.

  Could someone please give me some advice on where I'm wrong please. The bottom is so close, but either slightly darker or more clear that I put that spoils the overall animation effect I want to create.

  
  Thank you

  
  Paul

  Lack of information exact system, rendering settings and so forth person can tell you a lot. That said, there are a few fundamental failures in your plan. First of all, web colors do not mean anything in AE or in most graphics programs than elsewhere because of the object of little quantification management and possibly color errors. Whatever colors you compose, do it using the normal RGB sliders. Second, blend modes are not transparency, even if for mathematical reasons, the formula mixture may appear to eradicate certain colors. Third, you must take into account the values of Gamma. Video is not linear mixture and time your screen of computer as well as the video content itself may have a built-in Gamma value. Thus, your merge operation could already produce erroneous results as a light mist, the encoding of the video file could introduce Gamma tilt and then finally in the last step, any tool that you use to view perhaps apply dynamic corrections thus or in reverse, not at all. So this is essentially to check these things and properly calibrate / setting of your monitor and your system color settings and make use of color in AE management, if any. However, in the end, you always see minor deviations of color. It is inherent in how compressed formats like H.264 work. You can only try to minimize as much as you can.

  Mylenium

• Please help a newbie. Site works fine on my pc, but no one else

  I don't really know how it goes. This is only the second site, I built, but something is wrong. When I saw in the IE browser, it looks great. When I type my URL on my PC with IE, it looks great. When I use the pc of someone else... not so great.

  My site everything seems different. No background image. No link button...

  Here's the URL: HTTP://www.customautoemblems.net

  Hoping it's something simple and I'd love to help.

  Dave

  The problem is that the server can not find your CSS stylesheet because your code is pointing to your hard drive - that nobody can see, but you.

  Will look OK on the computer where the files (your PC), it will crumble on the PC of someone else because there is no CSS for the style of the page.

  should look like

  Did you define a site in Dreamweaver?

• Design pen tool does not, please help the newbies!

  Hello

  I am very new in design, I'm working the pen tool, which has worked before when I was playing around with it on an earlier design, but I just downloaded the creative suite and when I use this design if I'm drawing a shape it creates black spots which first of all make it difficult to move to the next point Since it covers the image and then when I cut out the picture and paste in his party.

  You have a fill selected as a default, so when you create a form that's being filled with color. Before, you start to draw, the value none Fill and stroke a value as 1 point.

• Please help this newbie - link to a widget by tabs

  I have 4 categories/links on the main home page that I need to make a link to a widget on a separate page.  I need each link to go to the tab corresponding to the widget.  It's possible?  I used the gun to anchor/place on each tab and I have linked to them.  But when I saw it, it each link is directed to the same tab.  What Miss me?

  Nothing. You cannot link to a specific tab of a widget. In my view, it would be like link to a specific image in a slide show - which obviously does not work as well.

• In Newb design - please help!

  Hey all,.

  A print layout in INDESIGN - so I

  photoshop files are saved as .eps 2.0 DCS

  CMYK + two-tone

  I try to print a proof in the House, but I cannot print only the composited CMYK channels... I tried for two days, and everything I print is CMYK as separate plates or CMYK print with two channels spot print...

  the printer that we have is an old konica minolta bizhub c350

  Please help, how to print on the page layout in InDesign with just the color image showing (CMYK) and no tones?

  Thank you!!

  Random neurons firing: you pouvez aka spot to others. Would it not possible alias both to a white ink? That would just prove the CMYK part, because I think that the OP's objective.

• BlackBerry Smartphones BB APP WORLD v. 1.1 PROBLEM - Please HELP!

  I am a new user/owner of a BB Curve 8330. In the options screen, it said c. 4.5.0.77 (Platform 3.2.0.51). I'm not sure what these numbers correlate exactly with (operating system, software device, etc.)-pathetically.

  This morning, I tried to upgrade to the new version 1.1 BB App World. I think I can get screwed up. When I installed it, it asked me if I wanted to remove the 1.0 version, and I said 'yes '. After installation of v. 1.1 and rebooting, I tried to use the new version and I always get the following error message:

  "BlackBerry App World is had problems connecting to the server BlackBerry App World. Check your network connections, and then try again. »

  My phone is not compatible with this version? I can't understand. I was going to download the 1.0 version and reinstall, but I can't seem to be able to find this version available for download.

  Please help - I don't know what to do.

  Thank you in advance,

  TDS

  PS: by the way, I know my network connections are fine. Everything works as it should.

  Here's the answer to the question I was trying to Irdawg a Newbie CrackBerry.com:

  Model: Curve 8330

• MuseJSAssert:Error calls the function selection: TypeError: cannot get the "init" reference to undefined property or no, I am a beginner and not able to solve this problem with my website, please help...

  Everytime I open my site I get this error "MuseJSAssert: Errot calling function selection: TypeError: cannot get the"init"reference to undefined property or null" and I was a newbie am not able to solve this problem.

  

  I did take all measures please help.

  Hello

  Can try you it on another browser that the problem does not come up on top of our end.?

  Kind regards

  Akshay

• Query XML giving NULL result - please help!

  Hello
  
  I am a newbie in XML and I try to extract the XMLType column information.
  I am using Oracle 11g
  
  I use the table is
  
  CREATE TABLE 'PRODUCTS '.
  (
  'ID' VARCHAR2 (10 BYTE),
  "CUSTDOC" 'SYS '. "" XMLTYPE.
  )
  _________________________________________________________________
  
  I am the slot loading XML file in the CUSTDOC column
  
  < report xmlns = "http://developer.cognos.com/schemas/report/6.0/."
  expressionLocale = "en - to the" >
  [< modelPath > / content/folder[@name='Packages']/folder[@name='Prod']/package[@name='ORGS']/model[@name='model'] < / modelPath >
  < drillBehavior modelBasedDrillThru = "true" / >
  < query >
  < application name = "Query1" >
  < source >
  < model / >
  < / source >
  < selection >
  < name of dataItem = aggregate 'Incident ID' = 'none' rollupAggregate = 'none' >
  < expression > [ABC]. [XYZ]. [Incident] < / expression >
  < / dataItem >
  < / selection >
  < detailFilters >
  < detailFilter >
  < filterExpression > [ABC]. [XYZ]. [Company] = "SOCIÉTÉTEST" < / filterExpression >
  < / detailFilter >
  < / detailFilters >
  < / query >
  < / queries >
  < layouts >
  < layout >
  < reportPages >
  < name = 'Page1' page >
  < style >
  < defaultStyles >
  < defaultStyle = "pg" refStyle / >
  < / defaultStyles >
  < / style >
  < pageBody >
  < style >
  < defaultStyles >
  < defaultStyle = "pb" refStyle / >
  < / defaultStyles >
  < / style >
  < content >
  < refQuery list = "Query1" horizontalPagination = "true" name = "List1" >
  < style >
  < defaultStyles >
  < defaultStyle = 'ls' refStyle / >
  < / defaultStyles >
  < value CSS = "border-collapse: collapse" / >
  < / style >
  < more >
  < listColumn >
  < listColumnTitle >
  < style >
  < defaultStyles >
  < defaultStyle = 'lt' refStyle / >
  < / defaultStyles >
  < / style >
  < content >
  < textItem >
  < dataSource >
  < dataItemLabel refDataItem = "The Incident ID" / >
  < / dataSource >
  < / textItem >
  < / Summary >
  < / listColumnTitle >
  < listColumnBody >
  < style >
  < defaultStyles >
  < defaultStyle = 'lc' refStyle / >
  < / defaultStyles >
  < / style >
  < content >
  < textItem >
  < dataSource >
  < dataItemValue refDataItem = "The Incident ID" / >
  < / dataSource >
  < / textItem >
  < / Summary >
  < / listColumnBody >
  < / listColumn >
  < / more >
  < / list >
  < / Summary >
  < / pageBody >
  < Entetepage >
  < content >
  < block >
  < style >
  < defaultStyles >
  < defaultStyle = 'ta' refStyle / >
  < / defaultStyles >
  < / style >
  < content >
  < textItem >
  < style >
  < defaultStyles >
  < defaultStyle = "tt" refStyle / >
  < / defaultStyles >
  < / style >
  < dataSource >
  < staticValue / >
  < / dataSource >
  < / textItem >
  < / Summary >
  < / block >
  < / Summary >
  < style >
  < defaultStyles >
  < defaultStyle = "ph" refStyle / >
  < / defaultStyles >
  < value = CSS "padding-bottom: 10px" / >
  < / style >
  < / pageHeader >
  < pageFooter >
  < content >
  < table >
  < tableRows >
  < tableRow >
  < tableCells >
  < tableCell >
  < content >
  < date >
  < style >
  < dataFormat >
  < dateFormat / >
  < / dataFormat >
  < / style >
  < / date >
  < / Summary >
  < style >
  < value="vertical-align:top;text-align:left;width:25%"/ CSS >
  < / style >
  < / tableCell >
  < tableCell >
  < content >
  < pageNumber / >
  < / Summary >
  < style >
  < value="vertical-align:top;text-align:center;width:50%"/ CSS >
  < / style >
  < / tableCell >
  < tableCell >
  < content >
  < time >
  < style >
  < dataFormat >
  < timeFormat / >
  < / dataFormat >
  < / style >
  < / time >
  < / Summary >
  < style >
  < value="vertical-align:top;text-align:right;width:25%"/ CSS >
  < / style >
  < / tableCell >
  < / tableCells >
  < / tableRow >
  < / TableRow >
  < style >
  < defaultStyles >
  < defaultStyle = "CT" refStyle / >
  < / defaultStyles >
  < value="border-collapse:collapse;width:100%"/ CSS >
  < / style >
  < /table >
  < / Summary >
  < style >
  < defaultStyles >
  < defaultStyle = "pf" refStyle / >
  < / defaultStyles >
  < value = CSS "padding-top: 10px" / >
  < / style >
  < / pageFooter >
  < / print this page >
  < / reportPages >
  < / page layout >
  < / page layout >
  < XMLAttributes >
  < name XMLAttribute = "RS_CreateExtendedDataItems" value = "true" output = "no" / >
  < name XMLAttribute = "listSeparator' value = ',' output ="no"/ >
  < / XMLAttributes >
  < / report >
  
  ____________________________________________________________________________________
  
  I run the query below
  
  SELECT SYS. XMLTYPE. GETCLOBVAL (SYS. XMLTYPE. Extract ("CUSTDOC",'/ Report/Queries/Query/Selection/DataItem/expression / Text () ')) 'CUSTDOC' OF 'PRODUCT '.
  
  and I await the result below
  
  CUSTDOC
  ---
  [ABC]. [XYZ]. [Incident]
  
  but I am NOTHING.
  
  Please help me. Don't know what I'm doing wrong here.
  
  Kind regards
  Ravi

  Hi Ravi,

  Don't know what I'm doing wrong here.

  Two things:

  -EXTRACT function is deprecated--> use XMLQuery or XMLTable rather
  -You are missing the namespace declaration

  See if it works for you:

  SQL> SELECT XMLCast(
    2           XMLQuery(
    3             'declare default element namespace "http://developer.cognos.com/schemas/report/6.0/"; (: :)
    4              /report/queries/query/selection/dataItem/expression'
    5             passing t.custdoc
    6             returning content
    7           )
    8           as varchar2(30)
    9         ) as expr
   10  FROM product t ;
  
  EXPR
  ------------------------------
  [ABC].[XYZ].[Incident]
   
  

• I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  You can use it with your TV.

• I am tryng to buying music on itunes, but it says security code wrong please help

  Hello

  I have problems I want tp purchase music on my itunes bt ts always requires the security code that I don't have it please help

  Check your card information. If they are correct, try to change or remove your Apple ID - Apple Support payment information

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  Hi yjain51,

  I understand you had some problems recently with getting Touch ID to work reliably on your iPhone 5s. I know that it is a feature of great security for your iPhone, so I'm happy to help you.

  When you use Touch ID, make sure that your hands are free of any dirt or moisture so that fingerprints can be read clearly. This article explains further:

  Use the ID Touch on iPhone and iPad - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• My hard drive will not be displayed in the Finder, please help!

  I tried several options to try to solve my problem, but it is not good. I have an external hard drive Seagate 2 to. I used it for about 6 months, but one day it just does not appear in the Finder more. I checked in disk utility and it shows up there, but it is labeled as "Uninitialized 2 TB Windows NT specifien". It seems strange, that it now says Windows when I used it fine on my Mac in the past. It won't let me hit mount either. Please help me.

  Thank you.

  Did you have the Seagate utilities or any installed third-party NTFS software? The drive has never been formatted to support OS X?

  Connect the external drive and OS X Terminal, after the release of

  diskutil list

• My ipod screen is black and I can not turn on, please help

  Hi my iPod Touch 5th generation 16 GB, exploded some 2 to 3 months ago. I turned on, but he couldn't come. I loaded but there was no indication that he was in charge. I connected it to my computer but itunes does not read, the screen is all black all the way. Please help me set up my iPod and the recovery/rehabilitation to zero.

  Thank you very much

  Did you try restarting force (now Home and power keys rack for 20 sec)?