Please help: cannot modify the label of the slide when you use the template
Hi all, I use this file cptl model to create a project of course. However, I just found out that I can't change the label of the slide of some slides, even if I see the name changed in the properties panel. When I go to the table of contents, these slides with new names still show their old names that come from the model.
Can someone help me with this?
Thank you.
If you close the project and then clear cache, that doesn't help not? (Edit > Preferences > General settings)
This happens with all projects or just this one?
Although I couldn't duplicate, register as a model (.cptl) or project (.cptx)?
Tags: Adobe Captivate
Similar Questions
-
Dear all,
I use vCAC 5.2 and try to set up a cloning of a vCenter model database to create a virt machine but I get this error that I can not make sense.
I went to the length of vCO configuration to try to dig into the CloneVM workflow, but it is not found, nor uin Manager in the Design Studio, nor through vCO model.
Here is the log of the vCenter Agent, could someone please help understand this? I pointed out the error below.
Thanks in advance!
Roman
[07/11/2013 17:18:48] [Info]: start: treatment of [CloneVM] [03bc141e-3d84-44ab-af7c-92895dbfccb6] work item IDS
[07/11/2013 17:18:48] [Debug]: [[asd09]] [CloneVM] VirtualMachine.Admin.ID= f492612b - 58 d 1-412f-99ac-47f067da764d
[07/11/2013 17:18:48] [Debug]: [[asd09]] [CloneVM] VirtualMachine.Admin.Name= asd09
[07/11/2013 17:18:48] [Debug]: [[asd09]] VirtualMachine.Admin.Owner=DKRDEMO\administrator [CloneVM]
[07/11/2013 17:18:48] [Debug]: [[asd09]] VirtualMachine.Admin.Approver = [CloneVM]
[07/11/2013 17:18:48] [Debug]: [[asd09]] VirtualMachine.Admin.UUID = [CloneVM]
[07/11/2013 17:18:48] [Debug]: [[asd09]] VirtualMachine.Admin.DnsName = asd09 [CloneVM]
[07/11/2013 17:18:48] [Debug]: [[asd09]] [CloneVM] VirtualMachine.Admin.Hostname = Cluster 01
[07/11/2013 17:18:48] [Debug]: [[asd09]] VirtualMachine.Admin.ProxyAgentID = vcac_vs_agent [CloneVM]
[07/11/2013 17:18:48] [Debug]: [[asd09]] [CloneVM] VirtualMachine.Admin.ClusterName = Cluster 01
[07/11/2013 17:18:48] [Debug]: [[asd09]] [CloneVM] VirtualMachine.ManagementEndpoint.Name= Cluster 01
[07/11/2013 17:18:48] [Debug]: [[asd09]] [CloneVM] VirtualMachine.ManagementEndpoint.Identity=tstvc02.dkrdemo.local/First Datacenter/host/Cluster 01
[07/11/2013 17:18:48] [Debug]: [[asd09]] clonefrom [CloneVM] = Windows2008R2EntEngTemplate
[07/11/2013 17:18:48] [Debug]: [[asd09]] [CloneVM] clonefromid = abc3b874 - 84D b 48, 6-6 - 8 c 31-a2bfe31dce70
[07/11/2013 17:18:48] [Debug]: [[asd09]] Legacy.Workflow.ImpersonatingUser = [CloneVM]
[07/11/2013 17:18:48] [Debug]: [[asd09]] Legacy.Workflow.User=DKRDEMO\administrator [CloneVM]
[07/11/2013 17:18:48] [Debug]: [[asd09]] [CloneVM] Notes =.
[07/11/2013 17:18:48] [Debug]: [[asd09]] [CloneVM] request_reason =
[07/11/2013 17:18:48] [Debug]: [[asd09]] available [CloneVM] = False
[07/11/2013 17:18:48] [Debug]: [[asd09]] [CloneVM] callExternalWorkflowActivityPostRequested = False
[07/11/2013 17:18:48] [Debug]: [[asd09]] [CloneVM] callExternalWorkflowActivityPreWaitingToBuild = False
[07/11/2013 17:18:48] [Debug]: [[asd09]] [CloneVM] callExternalWorkflowActivityPostWaitingToBuild = False
[07/11/2013 17:18:48] [Debug]: [[asd09]] [CloneVM] callExternalWorkflowActivityPreBuildingMachine = False
[07/11/2013 17:18:48] [Debug]: [[asd09]] [CloneVM] Infrastructure.ResourcePool.Name= Platformix-Gold
[07/11/2013 17:18:48] [Debug]: [[asd09]] Infrastructure.Admin.MachineObjectOU = or = Computers, dc = dkrdemo, dc = local [CloneVM]
[07/11/2013 17:18:48] [Debug]: [[asd09]] [CloneVM] VirtualMachine.Storage.Name= VMFS-Gold-1
[07/11/2013 17:18:48] [Debug]: [[asd09]] [CloneVM] VirtualMachine.Network0.Name= VM Network
[07/11/2013 17:18:48] [Debug]: [[asd09]] VirtualMachine.Admin.TotalDiskUsage = 40960 [CloneVM]
[07/11/2013 17:18:48] [Debug]: [[asd09]] VirtualMachine.CPU.Count = 2 [CloneVM]
[07/11/2013 17:18:48] [Debug]: [[asd09]] VirtualMachine.Disk0.IsClone = true [CloneVM]
[07/11/2013 17:18:48] [Debug]: [[asd09]] VirtualMachine.Disk0.Size = 40 [CloneVM]
[07/11/2013 17:18:48] [Debug]: [[asd09]] [CloneVM] VirtualMachine.Disk0.Storage = VMFS-Gold-1
[07/11/2013 17:18:48] [Debug]: [[asd09]] VirtualMachine.LeaseDays = 0 [CloneVM]
[07/11/2013 17:18:48] [Debug]: [[asd09]] VirtualMachine.Memory.Size = 4096 [CloneVM]
[07/11/2013 17:18:48] [Debug]: [[asd09]] VMware.VirtualCenter.OperatingSystem = windows7Server64Guest [CloneVM]
[07/11/2013 17:18:48] [Debug]: [[asd09]] [CloneVM] Vrm.ProxyAgent.Uri =https://vcac.dkrdemo.local/VMPS2
[07/11/2013 17:18:48] [Debug]: [[asd09]] [CloneVM] VirtualMachine.Admin.AdministratorEmail =[email protected]
[07/11/2013 17:18:48] [Debug]: [[asd09]] VirtualMachine.Admin.Description = [CloneVM]
[07/11/2013 17:18:48] [Debug]: [[asd09]] VirtualMachine.ManagementEndpoint.Endpoint0 = esx01.dkrdemo.local [CloneVM]
[07/11/2013 17:18:48] [Debug]: [[asd09]] VirtualMachine.ManagementEndpoint.Endpoint1 = esx02.dkrdemo.local [CloneVM]
[07/11/2013 17:18:48] [Debug]: using the default value of the property 'VirtualMachine.CDROM.Attach' as it is not defined in the work item
[07/11/2013 17:18:53] [Info]: there are 2 hosts in the cluster.
[07/11/2013 17:18:53] [Debug]: from Ping report
[07/11/2013 17:18:55] [Debug]: Ping Sent Succesfully: [<? xml version = "1.0" encoding = "utf-16"? > < pingReport = "vcac_vs_agent" CurrentVersion "5.2.0.0" = Nom_agent agentLocation = "VCAC' WorkitemsProcessed '962' = > < nodes > < name of node = 'Cluster 01' type = 'Cluster' identity="tstvc02.dkrdemo.local/First host/Cluster/Datacenter 01"isCluster ="True"managementEndpointId ="af594dd6-a402-4083-8e3a-53f19a531d87"/ > < / nodes > < AgentTypes > < AgentType name ="Hypervisor"/ > < AgentType name ="vSphereHypervisor"/ > < / AgentTypes > < / pingReport >]
[07/11/2013 17:18:55] [Debug]: Ping completed report
[07/11/2013 17:18:55] [Info]: send request to https://vcac.dkrdemo.local/VMPS2
[07/11/2013 17:18:55] [Info]: WorkitemResponse [<? xml version = "1.0" encoding = "utf-16"? > < workItemResponse id = "03bc141e-3d84-44ab-af7c-92895dbfccb6" > < task type = "CloneVM" > < successful result = "False" > < message > value cannot be null.]
[Parameter name: source < / message > < name "VirtualMachine.Admin.BuildFailure parameter" = > true < / parameter > < / result > < / task > < / workItemResponse >]
[07/11/2013 17:18:55] [Debug]: Workitem sent successfully: [03bc141e-3d84-44ab-af7c-92895dbfccb6]
[07/11/2013 17:19:03] [Info]: start: treatment of [DisposeVM] [1fad7986-6177-4ebf-8a89-0d76dcab10ab] work item IDS
[07/11/2013 17:19:03] [Debug]: [[asd09]] [DisposeVM] VirtualMachine.Admin.ID= f492612b - 58 d 1-412f-99ac-47f067da764d
[07/11/2013 17:19:03] [Debug]: [[asd09]] [DisposeVM] VirtualMachine.Admin.Name= asd09
[07/11/2013 17:19:03] [Debug]: [[asd09]] VirtualMachine.Admin.Owner=DKRDEMO\administrator [DisposeVM]
[07/11/2013 17:19:03] [Debug]: [[asd09]] VirtualMachine.Admin.Approver = [DisposeVM]
[07/11/2013 17:19:03] [Debug]: [[asd09]] VirtualMachine.Admin.UUID = [DisposeVM]
[07/11/2013 17:19:03] [Debug]: [[asd09]] VirtualMachine.Admin.DnsName = asd09 [DisposeVM]
[07/11/2013 17:19:03] [Debug]: [[asd09]] [DisposeVM] VirtualMachine.Admin.Hostname = Cluster 01
[07/11/2013 17:19:03] [Debug]: [[asd09]] VirtualMachine.Admin.ProxyAgentID = vcac_vs_agent [DisposeVM]
[07/11/2013 17:19:03] [Debug]: [[asd09]] [DisposeVM] VirtualMachine.Admin.ClusterName = Cluster 01
[07/11/2013 17:19:03] [Debug]: [[asd09]] [DisposeVM] VirtualMachine.ManagementEndpoint.Name= Cluster 01
[07/11/2013 17:19:03] [Debug]: [[asd09]] [DisposeVM] VirtualMachine.ManagementEndpoint.Identity=tstvc02.dkrdemo.local/First Datacenter/host/Cluster 01
[07/11/2013 17:19:03] [Debug]: [[asd09]] clonefrom [DisposeVM] = Windows2008R2EntEngTemplate
[07/11/2013 17:19:03] [Debug]: [[asd09]] [DisposeVM] clonefromid = abc3b874 - 84D b 48, 6-6 - 8 c 31-a2bfe31dce70
[07/11/2013 17:19:03] [Debug]: [[asd09]] Legacy.Workflow.ImpersonatingUser = [DisposeVM]
[07/11/2013 17:19:03] [Debug]: [[asd09]] Legacy.Workflow.User=DKRDEMO\administrator [DisposeVM]
[07/11/2013 17:19:03] [Debug]: [[asd09]] [DisposeVM] Notes =.
[07/11/2013 17:19:03] [Debug]: [[asd09]] [DisposeVM] request_reason =
[07/11/2013 17:19:03] [Debug]: [[asd09]] [DisposeVM] callExternalWorkflowActivityPostBuildingMachine = False
[07/11/2013 17:19:03] [Debug]: [[asd09]] [DisposeVM] callExternalWorkflowActivityPreDisposing = False
[07/11/2013 17:19:03] [Debug]: [[asd09]] [DisposeVM] Infrastructure.ResourcePool.Name= Platformix-Gold
[07/11/2013 17:19:03] [Debug]: [[asd09]] Infrastructure.Admin.MachineObjectOU = or = Computers, dc = dkrdemo, dc = local [DisposeVM]
[07/11/2013 17:19:03] [Debug]: [[asd09]] [DisposeVM] VirtualMachine.Storage.Name= VMFS-Gold-1
[07/11/2013 17:19:03] [Debug]: [[asd09]] [DisposeVM] VirtualMachine.Network0.Name= VM Network
[07/11/2013 17:19:03] [Debug]: [[asd09]] VirtualMachine.Admin.BuildFailure = true [DisposeVM]
[07/11/2013 17:19:03] [Debug]: [[asd09]] VirtualMachine.Admin.TotalDiskUsage = 40960 [DisposeVM]
[07/11/2013 17:19:03] [Debug]: [[asd09]] VirtualMachine.CPU.Count = 2 [DisposeVM]
[07/11/2013 17:19:03] [Debug]: [[asd09]] VirtualMachine.Disk0.IsClone = true [DisposeVM]
[07/11/2013 17:19:03] [Debug]: [[asd09]] VirtualMachine.Disk0.Size = 40 [DisposeVM]
[07/11/2013 17:19:03] [Debug]: [[asd09]] [DisposeVM] VirtualMachine.Disk0.Storage = VMFS-Gold-1
[07/11/2013 17:19:03] [Debug]: [[asd09]] VirtualMachine.LeaseDays = 0 [DisposeVM]
[07/11/2013 17:19:03] [Debug]: [[asd09]] VirtualMachine.Memory.Size = 4096 [DisposeVM]
[07/11/2013 17:19:03] [Debug]: [[asd09]] VMware.VirtualCenter.OperatingSystem = windows7Server64Guest [DisposeVM]
[07/11/2013 17:19:03] [Debug]: [[asd09]] [DisposeVM] Vrm.ProxyAgent.Uri =https://vcac.dkrdemo.local/VMPS2
[07/11/2013 17:19:03] [Debug]: [[asd09]] [DisposeVM] VirtualMachine.Admin.AdministratorEmail =[email protected]
[07/11/2013 17:19:03] [Debug]: [[asd09]] VirtualMachine.Admin.Description = [DisposeVM]
[07/11/2013 17:19:03] [Debug]: [[asd09]] VirtualMachine.ManagementEndpoint.Endpoint0 = esx01.dkrdemo.local [DisposeVM]
[07/11/2013 17:19:03] [Debug]: [[asd09]] VirtualMachine.ManagementEndpoint.Endpoint1 = esx02.dkrdemo.local [DisposeVM]
[07/11/2013 17:19:03] [Info]: send request to https://vcac.dkrdemo.local/VMPS2
[07/11/2013 17:19:03] [Info]: WorkitemResponse [<? xml version = "1.0" encoding = "utf-16"? > < workItemResponse id = "1fad7986-6177-4ebf-8a89-0d76dcab10ab" > < task type = "DisposeVM" > < successful result = "True" > < message / > < / result > < / task > < / workItemResponse >]
[07/11/2013 17:19:03] [Debug]: Workitem sent successfully: [1fad7986-6177-4ebf-8a89-0d76dcab10ab]
Roman salute
I would check a few things
You can launch the clone of the template in vSphere with all things being equal. As by selecting the same model to clone, same config, same specification custom etc. and most importantly still can you do with the same account service and even storage and networks, these problems occur usually when something downstream vCAC is not correct
-
Please help: cannot change the order of objects on the stage by dragging in the timeline
Hi all, I am using Captivate 5.5 and try to change the order of objects on my stage.
I searched on the internet and read the FAQ here. I cleaned my cache of projects. My slide number amounts to 61, so not very big.
I wonder if it is because I have several interactive objects, on the other?
For all the blocks on this stage, with the exception of the one on the left of the first line, I have a picture of grayout, a slidelet, a click box and a real picture, all stacked together. I need to order them correctly so that they play in the right way. I have the right order for the second block on the first line, but can not change the order for the rest of the objects by dragging in the timeline - it just won't let me hang out.
Here is the screenshot of my scene and a part of the timeline. Thanks for the tips!
It turns out that I made a stupid mistake by dragging the names of objects instead of the real thing... Sorry guys.
-
Please help me solve the error message
Connect the phone to a computer running iTunes 12.3.3 or later, with a cable and try check update
-
someone please help me restore the photos deleted from my camera sony cybershot
someone please help me restore the photos deleted from my camera sony cybershot downloading on computer. Are there any hidden folder in drive g as basket in pc from where deleted photos can be restored
N ° when the photos are removed from the Flash of the camera, they are gone.
If you have not done something since then with the camera, you can download the software on your computer that may be able to recover deleted photos, or you can send the somewhere flash memory card that can do it for you.
-
Dear Sir / Maam,.
Please help me find the driver for the unknown device from my laptop.
Model HP 2323sx G6
Operating system Windows 8.1 (64-bit)
Unknown Device acpi\hpq0004\3 & 11583659 & 0
Thanks in advace.
Hello:
You need this driver...
http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_125640_1
-
Ideas:
- When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you
I tried to download the RegCure as advised, but the problem still exists...
Who advised you to 'download... '. RegCure? Doing so could only worse issues! If you ever think that your registry database must be cleaned, repaired, boosted or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.
See http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Deleted his bus from Add/Remove programs by mistake please help me get the sound on my computer. I had downloaded new software I wanted to delete and that which the sound bus (I think that's what it was called was another program added with this software, it is a blue icon) I feel stupid, but really would like help getting the sound back on my computer. I have Windows XP Professional. Thank you.
Hi Rhonda327,
Check if an error code is listed in the Device Manager:
a. Click Start, click Run and then type devmgmt.msc
b. expand sound, video and game controllers
c. double-click the sub element
1. run the system restore. Restore the system to the date when it was working fine. You can check the link for the steps below: how to restore Windows XP to a previous state: http://support.microsoft.com/kb/306084
2. you can also run the patch from the link below: diagnose and automatically repair audio playback problems:http://support.microsoft.com/mats/no_sound/en-us
Check out the links that gives you information about the installation of drivers from the manufacturer's Web site and also not to know the manufacturer or the supplier of the device below.
Link:
How to update a sound card driver in Windows Vista and Windows XP:http://support.microsoft.com/kb/166774
Add the above suggestions, you can alos use windows update to install the drivers for the device. Link, please refer to:http://www.microsoft.com/windows/downloads/windowsupdate/learn/windowsxp.mspx
With regard to:
Samhrutha G S - Microsoft technical support.
Visit ourMicrosoft answers feedback Forum and let us know what you think.
-
Toshiba bluetooth stack, Sony & Windows 7
"To continue or not to continue the reinstallation of the Toshibas enigma -" Toshiba bluetooth stack "-on a Windows 7 Pro upgrade Vista Pro.
After a clean install, I lost my beautiful environment of Bluetooth on my laptop Sony vgn-bx51-vn in 2005 (a laptop that is like finding teeth of chicken on the Sony site). I did a smart thing to keep the "Toshiba" Bluetooth file when I finally removed the windows.old folder after the re-installation. Only smart because it allowed me to compare models with a pilot of 'original' newly downloaded and files utility (including msi files) Sony - the result was that there are a lot of files that is different.
They newly installed drivers grumble horribly subject knowing incompatabilities with Win 7 (which is just a skin on top of Vista... or so I thought) and refuse to carry you. They subsequently take you to Toshiba where you end by abandon the search for any useful help in spite of being a good faith user - no?
Cut to the Chase. Can someone please help to get the drivers/utilities on my Sony notebook by hook or crook. NB. I hope just to aspire to the use of Bluetooth for something useful someday but am also irritated by the cul-de-sac which is software policy.
Thank you very much - I.
Ok.
I mentioned that I had 2 problems - no Wifi and no BT.
Wifi driver here http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2259&DwnldID=20790&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+Centrino%C2%AE+Wi-Fi+Products&ProductProduct=Intel%C2%AE+PRO%2fWireless+3945ABG+Network+Connectioneng#help
And here's the fix for BT http://mikescloset.blogspot.co.uk/2011/12/dell-toshiba-bluetooth-350-and-windows.html
Credit to Mike for the intelligent correction.
-
Please, help to recover the BIOS on the dv7-4120er (xe276ea)
Please, help to recover the BIOS on the dv7-4120er (xe276ea).
I updated my BIOS, but now the screen is off.
I have no HP_TOOLS of recovery on the HARD drive partition and I did not backup usb with BIOS.
How can I recover my BIOS?
Please help me.
Please see HP Notebook PC - Restore the BIOS, which States that you may be able to create a 'USB key with a HP_TOOLS volume' to Flash the BIOS. Please see http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/How-to-use-the-HP-BIOS-update-uefi-utility/... for step by step instructions that can be used to create the 'USB key with a HP_TOOLS volume '. You may be able to skip 'step 4 '. Please see the HP Pavilion dv7-4120er Entertainment Notebook PC drivers page for the appropriate download needed for this procedure.
Updated HP Notebook System BIOS (Intel processors)
HP Unified Extensible Firmware Interface (UEFI) support environment
If you have any other questions, feel free to ask.
Please click the 'Thumbs Up' white LAURELS to show your appreciation
-
Please help me correct the printer prints in code
Please help me correct the printer prints in code
Hi, Vicky,
Printer make a model, please.
Did the firmware update? Visit the site of the manufacturer of the printer for the updates.
Right click on my computer
Click on manage
Click on Device Manager
Click on the + sign next to the printer
Right-click on the item in the menu drop down and select uninstall
Restart your computer and try printing again
Look for updates on the manufacturer's website.
-
HP Pavilion g6: Please help me remove the Power On password or administrator password
Please help me remove the administrator password or power on password. The stop code is: 68478111
Hello:
Please see the info on the link below which should solve your dilemma.
-
Running: Win7 - XPS 8100 8 GB - 64 bit OS
Graphics card: ATI Radeon HD 5450
Serial number ADMIN NOTE: maintain the label removed by privacy policy >
Hello
Recently I get this message as the computer freezes momentarily and then recovers.
"Display driver AMD driver stopped responding and has successfully recovered."
I checked the support for Dell drivers and received conflicting results.
When I checked with the help of system analysis, it gave me a list of the 54 system-wide updates. How could it be possible?
When you use the label of my service, I got the following result:
ADMIN NOTE: maintain the label removed by privacy policy >
Don't you think that's what I use, and if yes, can you tell me who I should first put to date? Finally, what I have to uninstall the old drivers and update via the Device Manager?
Thanks in advance for your help,
Jane
54 updates is not necessary. You should only update a driver to correct a specific problem. You don't need to remove the video card driver before installing a newer version.
* Go here
* Click on download
* The file should save on your windows desktop
* Double-click the file
Follow the instructions -
Have inadvertently made my banks logo my background on my table, please help, not found the answer anywhere.
Hello
See if this helps you:
"Change your desktop background (wallpaper).
http://Windows.Microsoft.com/en-us/Windows/change-desktop-background-wallpaper#1TC=Windows-7
See you soon.
-
Please help me choose the right format mask
Hello everyone.
We use Oracle 11.1.0.7 RAC.
Please help me choose the right format for function to_char mask. On the left is a digital input, on the right is output desired:
NUMBER VARCHAR2
0,123 0.123
12345678-12345678
12345678.1234 12345678.1234
12345678.123 12345678.123
12.00000008 12.00000008
WITH data AS (SELECT 0.123 n FROM DUAL UNION ALL SELECT 12345678 FROM DUAL UNION ALL SELECT 12345678.1234 FROM DUAL UNION ALL SELECT 12345678.123 FROM DUAL UNION ALL SELECT 12.00000008 FROM DUAL) SELECT TO_CHAR (n) FROM data;
Thank you, Dmitry.
Hi, Dmitri,
Dmitry Dunaev wrote:
Hello everyone.
We use Oracle 11.1.0.7 RAC.
Please help me choose the right format for function to_char mask. On the left is a digital input, on the right is output desired:
NUMBER VARCHAR2
0,123 0.123
12345678-12345678
12345678.1234 12345678.1234
12345678.123 12345678.123
12.00000008 12.00000008
- WITH the data AS
- (SELECT 0,123 n FROM DUAL)
- UNION ALL
- 12345678 SELECT FROM DUAL
- UNION ALL
- SELECT 12345678.1234 FROM DUAL
- UNION ALL
- SELECT 12345678.123 FROM DUAL
- UNION ALL
- SELECT THE DOUBLE 12.00000008)
- SELECT
- To_char (n)
- Of
- data;
Thank you, Dmitry.
I don't think that TO_CHAR can do by itself. You should maybe call TO_CHAR and then manipulate the output a bit.
Looks like TO_CHAR with 1 single argument does exactly what you want except when it returns a string starting with a decimal point, in which case you want to concatenate a '0'. So call TO_CHAR with 1 argument, see if returns the string begins with a decimal point and, if so, put a '0' on it, like this:
WITH got_str AS
(
SELECT n
TO_CHAR (n) AS str
FROM the data
)
SELECT n
CASE
WHAT LIKES str '. %'
THEN "0". Str
Of ANOTHER str
END AS str0
OF got_str
;
Output:
STR0 N
---------- -----------------------------------------
0,123.123
12345678-12345678
12345678.1 12345678.1234
12345678.1 12345678.123
12.0000001 12.00000008
What do you want for greater than-1 negative numbers? You may need to make the CASE a little more complicated expression, like this:
WITH got_str AS
(
SELECT n
TO_CHAR (n) AS str
FROM the data
)
SELECT n
CASE
WHAT LIKES str '. %'
THEN "0". Str
WHEN the str LIKE '. %'
THEN '-0 "|" SUBSTR (str, 2)
Of ANOTHER str
END AS str0
OF got_str
;
Maybe you are looking for
-
Set the bar tab under the address bar; No options "Tabs above" not listed anywhere.
There's no other choice "Tabs at the top". Tab Mix Plus move at the bottom of the view-port, but not in the address bar at the view port. Extremely awkward. makes navigation difficult and more difficult to locate the tabs, being further from the view
-
The only theme available is the default theme. Where is the list?
Hello.I'm changing the theme on Firefox, but there is no other themes besides the default theme (which is ugly). Where is the list?
-
ODD makes noise at the start of Satellite P300 - 19 p
I recently bought a Satellite P300 - 19 p.When I have done hard disk sewitch grind a few noises.Once I connected it stops. Is this normal. ?
-
Compaq CQ61-410US boot CD drive
My new Compaq does not start an UBUNTU or a CD of Acronis, he seems to use the player for a few moments and then ignore it and start in Windows 7. The boot order displays the CD drive first, and the two CD will start fine on other machines. What is
-
Playlist published on iPhone cannot sync with iTunes?
Is it possible to have your reading list itunes 'sync 'd' to align with an editing tool you did directly on your iPhone or your device? for example, I have a reading list put in place and when you listen to it if a song comes on I don't like or is no