Please help with server c220 m3, Im done!
I have 2 hard drives 3 to each, I tried to install windows server 2012 for a week until that now I can't do it, I tried UEFI, I did windows UEFI and convert the gpt disk when the installation is complete, I can not start, I tried to correct bcdboot and bcdedit and does not help. I read it is that something in connection with South Bridge but when I enter the bios, I found just on and off.
Please someone help
Is this a standalone C220?
Take a look at http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html
and check your Version settings
W2012 or W2012 R2
What I/O adapter?
Tags: Cisco DataCenter
Similar Questions
-
I need to reactivate Photoshop CS4 because I have a new hard drive in a reminder for my 2.5 yr old iMac last operating system running. When you open the program, I was told to contact Adobe support and give them an error code: 150:30. Please help with permission. ?
You can repair it yourself. I have a screenshot guide. You use app the Mac Terminal and a python (.py) script that comes with the recovery of the license for the Mac package.
Don't forget to leave a space after typing sudo python and note that your password will not display any points. Simply enter it blind.
Start 11 Message and take your time. It does not work. Layout error 150:30 opening Photoshop cs4 on Macbook Pro
Gene
-
Please help with download. ?
Please help with the download?
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | 9,8 | 9 standard | 8 standard
- Captivate: 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 14 | 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
- Premiere Elements: 14 | 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
Get error 207 trying to download creative Cloud and someone please help with this problem, thanks in advance please.
Please refer to
-
Please help with conditional actions showing the PlayBar
I tried to set up a tip action that will not allow users to move forward until they have clicked on the 3 themes I want to see again them. I assigned variables, follow the tutorials and do everything now. Please help how I my Advanced actions set upwards... everything shows and hides all work so I have to assume that the assignment of variable works as well. I used numbers initially and changed my value of the variable of "dude" just to make sure I was not missing something.
Here's the aciton condtional which is performed after the entry of the slide
All logic seems in tact for me however I click on each of my boxes and all conditions must be true, but will not display game bar...
Note: I also tried to show a next button and just show the things randomly with the same logic and it just will not work... What am I doing wrong?
Something escapes me in your question: How do trigger you the conditional action? I suspect that he is never executed, but may be wrong of course.
I created a small example to check: slide contains 3 buttons that trigger an action condtional with two decisions. The first decision is a simulated standard measure (condition 1 = 1 is always correct) assigns the value 1 to the variable corresponding user and displays a caption text, that was initially hidden. This is a screenshot of this first decision Stand for the first Bt_One action to be triggered by the first button:
The second decision Check is the action of condtional real, very similar to yours. This will be done after the first decision:
Create a duplicate of this action for the other two buttons, you only have to edit the first decision where the user variable needs to be changed.
In my example, when you click the last button (regardless of the sequence) all the text captions should have been disclosed (I na not hide others, but you can do the same of course) and the second decision check will result in a positive response, so the playback bar appears immediately.
Lilybiri
-
Please help with error2130906240
Hi all!
So Ive had this problem several times now. It was initially because of the CD now I don't know the reason why when im burning a dvd for this encoding and when its almost about to end to burn the first DVD. My PC will eject the DVD and adobe first pro shows and error 2130906240 im not sure what this means and ive been looked everywhere but I can't find an answer someone please help! Thank you very much!
If you burn instead, on the record, and then the test with the software free burning utility, ImgBurn, made the entire process?
Also, ImgBurn will give you all the data on your drive and your blank media used. Check your drive or the firmware and update if necessary. What brand of media you use, and what ImgBurn reports for the mfgr. Info?
Good luck
Hunt
-
Please help with a basic javascript syntax
Can anyone help me please with an installation of 'remove from Favorites', I'm working.
I have query to get all the favourites, and then I pulled out the Favorites to the bottom of the page
Each favorite has a link 'remove from Favorites' - I want to make sure that when a user clicks on this link, they get a javascript confirm box pop up saying "are you sure you want to delete #favourites name # of your Favorites?
So I have...
function remove(profile,name) {}
If (confirm ("are you sure you want to delete #name # your Favorites?")) {
Window.Location = "remove_from_favourites.cfm? deleteFavID = #profile # & removedName = #name #
}
}
and
< div onClick = "remove(#rs_favs.favouriteeID#,#rs_favs.firstName#)" > remove from Favorites < / div > "
but it does not work - I think that there are 2 problems...
problem 1 - I used CF # in the suppression works as I don't know what we're doing in javascript for "output" a variable (see where it says "Are you sure you want to remove #name # favorite") what should I use instead of ' # '?
problem 2 - I tried to pass to the function variables > > onClick = "remove(#rs_favs.favouriteeID#,#rs_favs.firstName#)" and I separated the but a commercial "," but I suspect that it is an incorrect syntax "
If someone could please help me I would be very grateful to be honest, I like coldfusion - but javascript hurt just my head! :(
Thank you very much.
PS how I wrapped my text 'remove from Favorites' in a div rather that to make a link real 'a href' - is that correct or is there a better way (ideally I want the text to look like all my other links (ie they emphasize on mouse over))It's because you pass a value of string without single quotes in your onclick() function.
To take
Remove Favorites -
Please help with regular expression
Hello
With the help of my previous answers of the detachment, , I've updated the query. But I don't get the answer you want in all cases. Could you please help me? My query is based on the previous announcement. Any other way to do this?
I'd really appreciate it.
I should get:select ltrim ( regexp_substr(txt, '\[(\w+)', 1, level), '[') as id, /* id is number */ ltrim ( regexp_substr(ltrim ( regexp_substr(txt, ':[^]]+', 1, level), ':'), '\w+-*\d*', 1, 1), ':') as qid, /* Qid could be char/number/space any combination except ':' */ ltrim ( regexp_substr(ltrim ( regexp_substr(txt, ':[^]]+', 1, level), ':'), '\w+', 1, 2), ':') as num, to_date( ltrim ( regexp_substr(ltrim ( regexp_substr(txt, ':[^]]+', 1, level), ':'), '[^:]+', 1, 3), ':'),'MM/DD/YY') as effdate from ( select '[10946:M100:N:][10947:Q1222:N:][38198:PPP-2:N:][13935:PPP-6:N:][38244:QQQ-4:Y:01/01/10]' as txt from dual ) connect by level <= length(regexp_replace(txt, '[^[]'));
But, beID QID NUM EFFDATE 10946 M100 N 10947 Q1222 N 38198 PPP-2 N 13935 PPP-6 N 38244 QQQ-4 Y 01-JAN-10
Thank youID QID NUM EFFDATE 10946 M100 N 10947 Q1222 N 38198 PPP-2 2 13935 PPP-6 6 38244 QQQ-4 4 01-JAN-10
Hello
If the column number is wrong, isn't it?
Describe what should be the num column. For example "num is the 3rd part of :-delimited list placed in square brackets.If this is what you want, and then change the definition of number of
... ltrim ( regexp_substr(ltrim ( regexp_substr(txt, ':[^]]+', 1, level), ':'), '\w+', 1, 2), ':') as num,
TO
... REGEXP_SUBSTR ( REGEXP_SUBSTR ( txt , '[^]]+' , 1 , LEVEL ) , '[^:]+' , 1 , 3 ) AS num,
-
When I open Facebook and a few other Web pages, the size of the screen is large and some of the information is not displayed. I have tried everything to reset the size and it does not work. I even zoom and missing information have not appeared. But if I connect in IE is fine and all the info is there and are usable. I hate IE and do not want to use then please help me to solve this problem with Firefox.
You can rename the file happy - prefs.sqlite content - prefs.sqlite.old (or remove the file) in the profile folder to reset the zoom on every site page.
You can use this button to go to the Firefox profile folder:
- Help > troubleshooting information > profile directory: opens showing the file
-
HP Pavilion P7-1110: Please help with editing after scanning
I know how to analyze an element, but after that I scan I do not know how to edit. I have Micro Soft Word 10 and my scanner is a HP Officejet 4630. If you can please help and thank you.
Hi Tadpolegreen,
Thank you for answering my questions!
I would recommend going by there how to scan guide Scan in Windows 7 with full functionality software HP for HP Multifunction printers. Select how to scan with the HP software and how to scan in the form of editable text (OCR), follow the instructions.
I hope this helps!
-
Please help with my reader prs 505
Hi thr,.
Please help me on my prs 505 reader, the display got very light canoe even read the words correctly, what's wrong with it, please help
Thank you
Jeevani
Hi Jeevani,
Welcome to the community of Sony!
Sony Electronics apologizes for any question, you have met with your product. A small number of E Ink devices, with specific display panels, can become sensitive to the discoloration of the display when a page is turned while watching in strong direct sunlight. Clear the display is only temporary and can be corrected by adjusting the angle of the camera to avoid direct light from the Sun and then a page turns.
Also, try the steps on the below technical support article:
http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1008817
Thank you for your message.
-
Please help with if, then formula
I'm having troble with so and so, please help. So here's my question, if E is less than or equal to 30, then multiply K by 12% and specify the amount of 12% at Mr. Merci for your help and please show me the formula.
Do you mean something like this?
The formula in the column N:
= IF(E≤30,K*12%,"")
You do not specify what you want if the value of E is > 30, so the formula here is nothing. If you want something, then replace ' ' to the desired value.
SG
-
Very slow Macbook Pro (2012), please help with report EtreCheck
Hi all
My Macbook runs very slowly, I tried a number of things suggested online but none worked. I recently went to a repair shop and they suggested it could be to do with the dataflex (not sure if this was exactly, but I remember it sounding similar.) They described as a hard drive to another internal component connection, sorry for the inaccuracy.) I have me am replaced, but this did not help either.
I downloaded the software EtreCheck and I was wondering if someone could help me to make light of the report on possible solutions? I have the feeling that it could be the hard drive needs to be replaced, but have no evidence of that. Verification has been run for the problem of "Beachballing" and got the sub report, please let me know if more info would be helpful. I hope it's telling in a way!
Thank you for the pointers.
EtreCheck version: 2.7.8 (238)
Report generated 2016-01-26 22:56:56
Download EtreCheck from http://etrecheck.com
Duration 10:23
Performance: Poor
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Problem: Beachballing
MacBook Pro (13-inch, mid-2012)
[Data sheet] - [User Guide] - [Warranty & Service]
MacBook Pro - model: MacBookPro9, 2
1 2.5 GHz Intel Core i5 CPU: 2 strands
4 GB of RAM expandable - [Instructions]
BANK 0/DIMM0
OK 2 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 2 GB DDR3 1600 MHz
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 420 - SN = 9G22603YVD3MB
Graphics Intel HD 4000
Color LCD 1280 x 800
OS X Mavericks 10.9.5 (13F34) - since startup time: less than an hour
Disk0 APPLE drive HARD TOSHIBA MK5065GSXF: (500,11 GB) (rotation)
EFI (disk0s1)
: 210 MB Macintosh HD (disk0s2) /: 499,25 go-go (248,48 free)
HD (disk0s3)
[recovery] recovery: 650 MB OPTIARC DVD RW AD - 5970H)
Apple Inc. FaceTime HD camera (built-in)
Apple Inc. Apple keyboard / Trackpad
Computer, Inc. Apple IR receiver.
Apple Inc. BRCM20702 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. Thunderbolt_bus.
Mac App Store and identified developers
[failure] com.apple.maspushagent.plist [details]
com.Apple.Security.syspolicy.plist [failure]
[loading] com.google.keystone.agent.plist [Support]
[loading] com.oracle.java.Java - Updater.plist [Support]
[loading] com.adobe.fpsaud.plist [Support]
[loading] com.google.keystone.daemon.plist [Support]
[loading] com.oracle.java.Helper - Tool.plist [Support]
iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
[ongoing] com.etresoft.EtreCheck.85920
FlashPlayer - 10.6: Version: 19.0.0.226 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 19.0.0.226 - SDK 10.6 obsolete! Update
Default browser: Version: 537 - SDK 10.9
o1dbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Support]
googletalkbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Support]
JavaAppletPlugin: Version: 25 check the version of Java 8 update
Flash Player [Support]
Java [Support]
TeXDistPrefPane [Support]
Time Machine not configured!
6% update_dyld_shared_cache
4% WindowServer
3% kernel_task
mdworker (3) 2%
1% launchd (4)
Top of page process of memory: ⓘ
508 MB com.apple.WebKit.WebContent (4)
502 MB kernel_task
Safari of 283 MB
Finder 197 MB
152 MB softwareupdated
988 MB of free RAM
3.03 GB used RAM (750 MB cache)
Used Swap 0 B
26 January 2016, 21:59:30 self-test - spent
Hello mrdivorce,
It looks like of course as evidence of a hard drive failing for me. Hard drives 2.5 "in the MacBook Pro tend to fail after 2-3 years. Judging by the date on your MacBook, I think that your time is up. Maybe try to find a different repair store. Looking for Service Center authorized Apple (https://locate.apple.com/).
I suggest upgrading to an SSD and increasing your RAM too. Then you have the hardware to run the last OS X 10.11.
-
Please help with this nightmare Yontoo
Adding or deleting, I deleted Yontoo I have no idea how it it has been downloaded period, I'm at the wheel of a 'XL' that has served me well. My problem is I deleted this Yontoo and forggetaboutit. This program has created 6 file enties 1) %Temp%\Yontoo FFClient.xpi 2)%Temp%\Yontoo IEClient.dll
3)%temp%\Yontoo Layers.crx 4)%Temp%\Yontoo Layers.pem 5)%Temp%\Yontoo Setup - Silent.exe 6) % Program Files%\Yontoo sleeping Runtime\Yontoo IEClient.dll... Then he then made 8 registry entries. If I can get these files removed from my machine, then I will devote my time to fix the registry. I say this because my nightmare does not stop there. Believe me when I tell you that this program "YONTOO" goes further because it created another register 16 subkeys. It's like something totally unknown to 'The Wild Wild West of the 21st Centuryt' someone would say enough is enough, but there is still a little to make this complete puzzle. This program goes further and creates and installs what they call 'Rage Page' it is a browser extension that changes the structure of the skin of the 'Facebook' and displays ads that seem to you guessed it "Facebook"... My main wish is that I will be able to get help with the "folders". I'm not a person notified with computers, but then I think that my say you I'm always pushing an "XP" in this era of high-tech a bit gave me there Yes... Anyway any help, you can afford to me will be greatly appreciated. Thank you in advance.Respectfully * address email is removed from the privacy *.Hello
Try the free version of revo uninstaller to completely remove all files and registry entries associated with YOONTOO.
Revo Uninstaller. (free version)
http://www.revouninstaller.com/revo_uninstaller_free_download.html
When you are finished, download and run a full scan of Malwarebytes anti-malware from the link provided below.
AV. Malwarebytes
Also run a full scan of SuperAntispyware.
SAS
http://www.SUPERAntiSpyware.com/
Remove any found object.
Further reading
http://www.ehow.com/how_8561545_delete-Facebook-pagerage.html
Good luck and let us know if this helped.
-
Please help with reset the time lock
We have problems with our computer to lock if we are online, etc. We need to connect back with our password to see what we were reading. If the mouse is still for a few minutes, the computer will automatically lock the computer mode. Can someone tell me how to set this time around so that it does not lock the computer after a minute.
Thank you!!
Hi jomabe,
Thanks for posting of answers.microsoft.com with respect to this application.
According to the information provided, it can be either parameter must be changed or the option of power setting could be revised in order to help you with this problem.
For a change of setting screen saver, click on empty place on the desktop and select PERSONALIZE / screen saver - check if the waiting period is set for a time relevant to your operation or if it needs to be revised. In addition, if the Logon Screen summary view is checked, it will ask login during the resumption of the activation of the screen saver.
Another area that may be the result of what is living could be in the power Plan options. To check if the power management options contribute to the problem, follow these steps to customize a diet plan to check whether components that can be going to sleep can be adjusted to your needs.
How to customize a diet plan
To customize a diet plan, follow these steps:
- Click Start
type Power Options in the start search box, and then click Power Options in the list programs. - Click on change settings for the plan under the plan.
- The parameters of change for the plan page, select the display settings and parameters of sleep that you want your computer to use, or click on change advanced power to change additional settings.
- Click OK, or click on save changes to save the changes.
Ensure that the plan of the power that you want the computer to use is selected in the Power Options page.
Pasted from http://support.microsoft.com/kb/935799>
Make sure to consider change Advanced Power settings selected in the context of your current power plan to check if a network card, hard drive or other component can go to 'sleep '.
Please let us know on this issue if it helps with the determination or help.
Kind regards
Debbie
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. - Click Start
Maybe you are looking for
-
New to me thinkpad does nothing
As the title says I have a thinkpad at home. It features a wiped drive that someone tried to fix it (wouldn't boot xp past loading screen). I press the power button and it lights. I press the button Lenovo and it starts to do something and then close
-
Whenever I turn on the automatic updates-"Notify me but don't automatically download or install their ' update for windows xp (kb976323) security always even comes after the installation. System: xp pro version 2002 sp3
-
I came back to a blue screen (this is the 3rd time) in the last 2 days. the message read: A problem has been detected and windows has shut down to prevent damage to your computer. KERNEL_STACK_INPAGE_ERROR. If this is the first time to see this mess
-
BlackBerry Z30 z30 flickerring display
Hello I bought my Z30 a month back and it worked fine for a few days. Alll of screen suddenly began flickering of 06/11/2015, I can't even do anything on this subject. Restart works fine as long as he's awake. The problem only comes when the system w
-
I have Windows 7 and cannot locate the folder ' send to '.
I want to add one or more files in the command line "send to" and cannot locate the required folder. I have not found the answer on the Technet.