Please insert the floppy disk in drive\device\harddisk5\dr5

Similar Questions

• Error when starting my computer code: there is no disc in the drive. Please insert the floppy disk in drive\Device\Harddisk3\DR3

  I just started getting this error in the last month.  It only happens when I start my computer.  I started to use Windows Live Mail Beta.  Would this have something to do with it?

  The problem was with Windows Live Sync.  Once I have not won, I didn't the message again.

  I'm fairly certain that this has nothing to do with Windows Live Mail beta - but it does not sound like a startup program any want a disc in the drive and that is what causes the problem.

  To boot from the hard drive, first of all, in the boot sequence, you may need to change the BIOS to hard drive first in the boot sequence (it is not always necessary and I have my system set to start first on the CD player and have no problem - but you have problems so we'll see if that fixes the).  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  While there, make sure that there is no setting to boot the disk hard regardless of the boot sequence.  Reset.  Normally, it should start without the error message.

  If this does not work, what is the EXACT (including all codes verbatim) error message?  It refers to a specific file, and if yes, what is the file name?  Are you able to start despite the message or that you need to insert the CD in the drive and then it allows you to start?

  Try to boot into safe mode without any CD in the drive (repeatedly clicking the F8 key during the boot process until the menu appears) and see if it works or if you have the same problem.  If you can start in safe mode, it's a good sign.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  If this does not work, go to start / search area and type msconfig.exe and enter, and double-click on the program icon that appears.  Go to the Startup tab and remove all checks, click OK, close the program and reboot and see if the problem persists.  If this isn't the case, then the problem is caused by something trying to boot at startup, and you may need to add the items back one by one, restarting after each one, until you find the culprit at the origin of the problem.  Then let this disabled element, double-check all the others that you actually want from startup, click OK, close the program and restart.  The problem should be solved.  If it's not working, then go back and re-check items that have been checked, click OK, and save the program and restart.  You'll be back to where you started, but we will have eliminated a very likely cause.

  That's all for now.  I hope this helps.  If the problem persists, I need more information about this message and all the files that he mentions.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Insert a disk in drive \device\harddisk5\dr5

  When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Please insert a disk into drive \device\harddisk5\dr5.
  My C: drive is my main area on the HARD disk.  The D: is the original Image. There are 5 locations of media FJ. the CD/DVD is E:. I have several USB ports, and a Magic Jack plugged into one of them..., printers, scanners, mouse and keyboard are also USB
  Are installed:
  FW MS .NET 1.1
  MRS. NST FW 3.5 sp1
  MS SQL Server 2005
  MS SQL Server 2005 compact Edition [ENU]
  MS SQL Server 2005 Native Client
  MS SQL Server Setup Support Files
  MS SQL Server VSS writer

  Here is the error log:
  [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 13: 52:01] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 13: 52:01] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11 13: 52:12] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11 13: 52:12] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 13: 52:12] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 13: 52:12] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 13: 52:12] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 13: 52:12] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [, 13: 52:12] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 13: 52:12] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 13: 52:12] VS70pgui: [2] component unknown status .NET Framework 2.0 SDK (x 64) double [14/06/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) : [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 14:34:42] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 14:34:42] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11, 14: 34:52] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11, 14: 34:52] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 14: 34:52] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 14: 34:52] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 14: 34:52] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 14: 34:52] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [14: 34:52] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 14: 34:52] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 14: 34:52] VS70pgui: [2] double status unknown component .NET Framework 2.0 SDK (x 64)

  Try to post or search the MSDN Forums

  http://social.msdn.Microsoft.com/forums/en-us/vssetup/threads

  http://social.msdn.Microsoft.com/forums/en-us/Vsexpressinstall/threads

  There are indications that some USB devices may cause this error. Try unplugging as much as you can.

• NO BOOT DEVICE - PLEASE INSERT the STARTUP DISK AND press a KEY ANY * please help *.

  I have a Compaq CQ-50 that worked very well. It has been upgraded to winows 7 Bonus a year ago. This is the message I get when I press the power button

  NO BOOT DEVICE - PLEASE INSERT THE BOOT DISK AND PRESS ANY KEY

  any help would appreciated more than you know

  Hello

  Have you tried to reinstall the hard drive if yes. Then the drive is bad & who has need of a replacement.

  If your laptop is still under warranty, contact HP and arrange for the disc replaced.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

• There is no disk in the drive. Insert a disc in the drive device harddisk5 dr5

  I started getting this error message "there is no disk in the drive. "Insert a disk into the drive device harddisk5 dr5.  I have to click on about 20 times and it goes away eventually.  I use Windows 7 and have been unable to find an answer to how to make this message go anywhere.  Any suggestion would be appreciated.  Thank you!

  Hello

  ·         Were there recent changes made on the computer before the show?

   

  This problem occurs when all the following conditions are true:

  (a) you have a removable drive, such as an Iomega Zip drive, configured as the drive letter C.

  (b) you don't have a removable disk in the removable disk drive.

   

  Method 1:

   

  Change the assignment of drive letter for the removable a drive letter other than C:\.

   

  a. log in the computer as an administrator.

  b. Insert a disk in the removable drive.

  c. type computer management in the start search box and press ENTER.

  d. click on disk management.

  e. right-click the partition, logical drive or volume that you want to change and then click on change drive letter and paths.

  f. click on the removable drive, click it, click on change, click the drive letter that you want to use, and then click OK.

   

   

  Method 2:

   

  I also suggest you to start the computer in a clean boot and check which program non-Microsoft is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/929135

   

  Warning: After using the boot is a way to solve your problem step 7 follow-up to reset the computer to start as usual.

   

  Method 3:

  You can go to Device Manager and see if you have any yellow bang! for the mouse or devices.

  (a) click Start and then click Control Panel.

  (b) click on system and Maintenance link.

  (c) in the system and Maintenance window , click the Device Manager link at the bottom of the window.

  In Device Manager, go then, mouse or other pointing devices.

  Do you see a yellow fringe! This would mean that you have an error with this device. Try to remove and reinstall.

  I hope this helps.

• Stop/Fix "Please insert the last disk of all selfextracting and click OK to continue.

  (With the help of Win 7 32 - bit update)

  I have not used a disk of 3.5 inches for many years.  In addition, I have not used any device (USB, CD or DVD) that has / had problems of "whole selfextracting.

  Also, AutoPlay was disabled on my system for years.

  That said, whenever I do a search of file/folder I get "Please insert the last disk of all selfextracting and click OK to continue.

  How can I be to determine:

  1. What causes the error message and/or
  2. How to stop it forever!

  Thanks for any thoughts or ideas!

  DennisCPA

  Don't know if you've discovered this done yet for you, but I would say it is your usb flash drive. It happens when he is out BEFORE you used the 'Safely remove' icon on the taskbar.

  If it is, then you must copy any information on the USB key to another location and format the USB. Then you can copy the info on it and you're right to go!

  This will continue to happen sometimes even though you have the properties/policies defined in a quick deletion. I got mine the value of the radio button performance and ALWAYS use the icon REMOVE safe in your taskbar. Once you find that your data will be corrupted if is not removed properly, even if the ssd is supposed to be "hot." If you have a usb key that has a light on it, wait for the light to STOP BLINKING before removing it. If you do not have a light on this issue, it is always advisable to wait a second or two after the popup window say you that it is save to remove your USB.

  See you soon

  Glenn

• T8000 not start: insert the floppy disk into the drive system

  I hope someone can help me with the problem on my T8000 (W2K)
  From one day to the other, I was not able to start start of the system. Immediately, it comes with the message:
  Insert system disk in drive
  Press any key when ready

  I have replaced twice the HD, but it did not help.

  Could someone help me with this problem?

  Thank you and best regards,

  rjanagac

  Hi Rodrigo

  It of not easy to say why unit you can t boot. It will be interesting to know more details. Have you tried to make a few changes in the BIOS boot priority? Located just (rider) settings on the HARD drive to master or slave?
  Have you tried reinstalling your operating system with recovery CD/DVDs?

  Good bye

• Problems become more problems... DISK BOOT FAILURE, INSERT THE FLOPPY DISK AND PRESS ENTER

  I recently had a question on my toolbar menu and begin to disappear.  While I was trying a number of different ideas through forums, I myself in another problem.  Now my computer boots but windows never start I just get a screen saying: "FAILURE of STARTUP DISK, INSERT the DISK AND press ENTER.  It worries me because my computer never came with a CD-ROM it was all preloaded when I bought.  Can anyone help, thanks

  Home premium Windows Vista, 64-bit operating system

  Hello

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Insert the floppy disk to update the security of Microsoft Works update.

  • O.K.  I get this message on the automatic updates failed.  I've never had Microsoft 9.  Why they continue to send me updates for something automatically that I don't have?  How to stop, as it is disturbing, especially since it deals with security.
  • I asked each help site I found.  I gave a run around.  Found a great online chat with Stella? but she lost and cannot find it again.

  Hi OKIEzb,

  1. What is the KB number update?
  2. You receive an error message and the failure of the update?
  3. You are able to install some other updates on the computer?

  I suggest you cross check if you have Microsoft works installed on the computer, open programs and features in Control Panel.

  Most of the manufacturer computer ship Microsoft works with computers.

  If find you works by Microsoft installed on your computer and you are able to install all other updates of Windows on the computer then I would suggest you contact technical support for Microsoft works.

  Microsoft œuvres

  http://www.Microsoft.com/products/works/support.mspx

   

  If you do not work for Microsoft installed on the computer, then I suggest that reset you the Windows Update components and check later if works update is offered again.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get this message "the function ar you, try to use is on a CD-ROM or other removable disk that is not available." Insert the floppy disk "solution Center".

  I can't seem to find a "Solution Center" marked drive & I'm not sure what to do.  Can anyone help?

  http://welcome.HP.com/country/us/en/contact_us.html

  HP support.

  http://h30434.www3.HP.com/

  Contact HP or ask their Support Forums.

  This is a problem with their software.

  See you soon. Mick Murphy - Microsoft partner

• Svchost.exe - No. disc there is no disk in the drive. Please insert a disk in to drive\Device\Harddisk1\DR5

  When I'm inserting an internet data card into my USB its error message indicating that svchost.exe - disc no. there is no disc in the drive. Please insert a disk into drive\Device\Harddisk1\DR5 Cancel, continue tryagain all option does not work its new popuping outside. :(pouvait point de restauration système peut aider?) or is it a problem with the virus please help.

  Hello

  1 did you change on your computer?

  2 what other USB devices are detected on the computer?

  Try connecting to another USB port and verify.

  Connect the card to internet data to another computer and check if works

  I suggest to download and install the Microsoft safety scanner and run the scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx WARNING: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate

• Starting problems, get the error "there is no disk in the drive. Please insert a disk into drive \Device\Harddisk1\DR1.

  1st problem: yesterday I started getting a popp window with the text following formulation - "there is no disk in the drive. Please insert a disk into drive \Device\Harddisk1\DR1' I have no idea what this introduced him or how stop it.  Any suggestions?

  2nd problem: whenever I restart my computer or shut it down and then power up the white bar that moves from left to right only moving to halfway through and then stops. I then have to hold the power button in until the computer turns off again and then rehit the power button. When it starts to power back up the white bar is always in the Middle, but then begins to finally complete the passage to the far right of the box. This problem started when I loaded the software for my printer Canon MX870 new that I bought and installed in October 2010 and has been done since then. I removed and reloaded the software of the printer on three different occasions but the problem persists.

  Hi frankb911,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/there-is-no-disk-in-the-drive-please-insert-a-disk/b9a130b2-4261-4385-a51f-28005f209a1d

  I hope this helps!

• installed the game CD Gears of War on my computer (Windows VISTA) and make me "Please insert the correct DVD - ROM, click OK and restart the application" - but the disk is IN the drive.

  original title: Gears of War for PC (Vista)

  I installed Gears of War game CD on my computer (Windows VISTA) and make me "Please insert the correct DVD - ROM, click OK and restart the application" - but the disk is IN the drive.  I've been on the net and does not know what is the problem and why this game will not run.  I've installed, uninstalled, reinstalled tried to run as administrator, got the latest patch, all the things that have said all sites to do - anyone have any ideas?  Any help would be appreciated!  Thank you!

  Hi NoOneSpeciale,

  It is very possible that your CD may be damaged.  Is it possible to get another copy to try on your machine? Or try this copy on another machine to see if it works or not.
  Also check in control panel--> system--> for you Device Manager make sure that there is no yellow/red icon next to the CD player and it's function correctly.

  Let us know the result, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• SE error message: there is no disc in the drive. Insert a disk in drive \Device\Harddisk1\DR1

  Original title: CMD. EXE - NO DISK

  I use Windows Vista Home Premium 64

  I get a pop box which reads:

  cmd.exe - disc no.

  There is no disk in the drive. Insert a disk in drive \Device\Harddisk1\DR1

  It appears each time I try and do anything. It gives me 3 options "Cancel, try again, continue»

  If you click over there enough he goes, then pop up when you try to do something else.

  I tried to run Norton (without success), Spyware remover tools (Adware - without success)

  Any help would be appreciated.

  Hi angelover08,

  1. have you tried to change the drive letters of removable disks?

  If this isn't the case, you can try to change the drive letter designated to removable drives all the other letters other than E, F, G and check if it helps.

  Check out the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Explorer.EXE - no disc: there is no disc in the drive. Insert a disk in drive \Device\Harddisk2\DR2

  Original title: \Device\Harddisk2\DR2

  I get this popup of the application:

  Explorer.EXE - no disc: there is no disc in the drive. Insert a disk in drive \Device\Harddisk2\DR2

  How can I get rid of it? I don't mean to access drive... it just popup as soon as I open my computer.

  Thank you

  John

  Hello

  ·         Do you get this error message when you restart computer?

  ·         You will remember to do recent changes on the computer before this problem?

  ·         You are able to open Internet Explorer?

  ·         You have a hard drive connected to the computer?

  I suggest to restart the computer in safe mode and let us know the status of the issue. Follow the steps in the link to start the computer in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Please see the link: how to fix explorer.exe - error disc no.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/how-to-fix-explorerexe-no-disk-error/76ef7ebd-5FCD-4c6e-9f33-50b6aae4a4e9

  You can also have a look at the following Suggestions for a question on the help forums:

  http://support.Microsoft.com/kb/555375