PNG do not correctly display in comps

Similar Questions

• List of the albums of songs is not correctly displayed on any iPad

  I noticed that the list of Top songs is not correctly displayed on any of our Ipads, but it is on the iPhones.

  Please see the image below.

  

  It should be "Best songs" in the upper left corner, and where the 2 circles broken are inside should be read (Top Songs) & (Top Albums) in a border, like the other lists.  Because these buttons are missing, I can't use this list.

  I have a family membership to the apple's music, and the problem occurs on 4 separate Ipads, with 4 separate apple ID's

  I erased and reset the ipad, and to restart the problem is solved, however as soon as I finish the music to apple and then soft reboot the problem recurs.

  Anyone else have this or have any ideas?

  I have the same problem and not a clue how to solve this problem:

  Button of the top missing graphics on iPad.

  I guess it's a popular bug...

• Acer site does not correctly display the specification.

  Acer site does not correctly display the specification.

  Example when you click on the link on M5 Explorer - 581 T-6405 please as to the specification of the model of S7-191-6447. Please check

  Thank you bring to our attention. We will ensure that it is transmitted.

• Canon 5 d images are not correctly displayed in the develop module, they look posterized or something. They look fine in the library module, what happens?

  Canon 5 d images are not correctly displayed in the develop module, they look posterized or something. They look fine in the library module, what happens?

  Try turning off the GPU. Go in Edition > Preferences > Performance (Lightroom > preferences > Performance on a Mac) and uncheck the box use Graphics Processor.

• Change is not correctly displayed in the develop Module

  When I make a change in the develop Module, changes are not correctly displayed in the main window and the browser window becomes gray. When I get back to the library Module, the changed image appears correctly. Then when I get back to the develop Module, the changes appear correctly. I followed the troubleshooting steps and a single point Adobe says that the permissions of the user is perhaps not good. I created a new user, and in the new user profile, LR works as it should. I use Windows 7. What should I change in the old "user permissions" to match the new "user permissions"? I prefer to delete the new user, rather than recreate my environment all over again.

  If you see gray windows to develop, it is almost generally a bad monitor profile in Windows. Unfortunately quite common. You should recalibrate the monitor. If you do not have a calibrator, try to go into the properties of your screen pane. Go to the color management tab and remove any profile associated with the parser.

• Animation is not correctly displayed in Firefox

  My animation is not correctly displayed in Firefox. Have searched this forum and others, I am only able to find solutions exceeded (such as the update to the latest version of Animate). I'm on the later versions of Animate and Firefox and still problems. Anyone know of a solution to this, or can I directly me to a discussion which has already covers it?

  One interesting thing to note is that only the tree Centre is differently, the commands for each seem to be the same. The small mountains are also fine, but not Mount Rainier.

  Here is my test page:

  http://jonnyart.com/test/NewYearsAnimation

  Thank you!

  In case someone else runs into this problem, I was able to solve it by rebuilding portions of the animation.

• Edited in Photoshop does not correctly display in Lightroom after recording the images

  Hello

  I recvently EU cloud Adobe and upgraded from Lightroom 3 or 4.  Since the upgrade I had problems with Lightroom not correctly display images edited in Photoshop.  Instead of the photoshop image, it creates a new jpeg image and appears in the library.  the PSD is not loaded into the library.

  I take a jpeg image of my library and shoosing the change based on Photoshop.  By selecting Edit a copy, I'm tried with the original and edit a copy with lightroom adjustments as well as with the same results.

  In Photoshop, I duplicate the base layer, the image upscaling, running some filters, addition of volunteering adjustment layers.

  I save the image in Photoshop format in the original folder where the original jpeg was in the Lightroom library.  I record with maximize compatibility on.

  When I return to Lightroom, the catalog displays the two files, the original jpeg and a copy identical to it, NOT the new file in photoshop with alterations.  If I go in the folder images occupy in the Finder using the Finder command show two images link to the same original jpeg format.  The modified file to photoshop is there in the folder but does not appear in Lightroom unless I drag and drop it.

  I've disabled all the filters and ensured that the sort is sort by name.  The image does not automatically appears in Lightroom after mounting.  Any suggestions?

  Thanks for any help!

  PS. I'm not looking for the subject, and there are discussions since 2007 and lightroom 2 but their solution was to start from scratch basically and I have a carefully labeled, starred and labeled catalog of more than 30 000 images and really don't want to do that

  Images that are edited in Photoshop will be displayed automatically in Lr only when the image file saved in Photoshop is identical to open LR.

  You say you open a jpg of Lr, then edit in PS-among other things-adding a few layers. Layers are not supported in JPG format, so you must either save it as a psd or a copy in jpg.

  In both cases, is not the same image as the one opened in Lr file, so it will have to be imported into Lr appears. If flatten you your image after editing in PS and then do a to your JPG - not a - it will be displayed in Lr.

  PS: the only exception is when you open a raw image from Lr into PS and you save it to PS in the format of file specified in Lr for external mounting. The saved file is automatically displayed in LR.

  Post edited by: web-Weaver; PS added

• My computer does not correctly display web pages?

  On some web pages the boxes are stacked, for example on the MSN homepage ads pop up in the left corner of the screen on the top of the page instead of on the right side, and on the right hand side where they should be it's an empty box? Other pages display does not correctly? I don't know how to fix this or why it happened?

  Hi ChristineDupre,

  1. what browser do you use?

  2. don't you make changes on your computer before this problem?

  If you use Internet Explorer, you can follow these methods & check if it helps.

  
  Method 1

  You can follow this link and check if the problem persists.

  Some sites Web may not behave as expected in Internet Explorer

  
  Method 2

  If you have Internet explorer 9 installed, please follow this link.

  Web pages displayed incorrectly in Internet Explorer 9

  Hope the helps of information.
  Please post back and we do know.

• Theme 25 - items are not correctly displayed in the presentation of the grid

  Hi all

  APEX 4.2.5.00.08

  Oracle 11g Enterprise Edition

  I am new to 4.2. I created an application on 4.1 and exported 4.1 and imported to 4.2. I'm trying to view the forms as they were posted in 4.1. But I have problems with the presentation of the grid. The elements are the overlap between them and the regions is narrowed. I read a blog and he said to remove all the colspan which will then automatically display elements. I did, but it did not work. The form consists of several parts using a list of tabs on the page. Parts of the tab using the model 'Region without the buttons and titles' of the region. I tried to replace the template "no model", while he was a little better, it has not corrected the problem.

  I've migrated the application and objects in the db at the APEX. ORACLE.COM (it took a few hours) and I hope someone can resolve my problem until the site is upgraded to 5.0.

  Workspace: RGWORK

  Application: KIMBERLY (33925)

  Page: Vehicle details (13)

  Username: TESTER

  Password: test456

  The first screen will be a Update/View vehicles 1 choice menu

  Choose this option and a report with a single line id.

  Select this line and display page 13.

  You have Developer access but please keep me on what has been fixed. I don't want remedy you. I want to know what has been resolved as well.

  Please get back me to me as soon as POSSIBLE because the site is upgraded to 5.0 this Friday.

  Robert

  sect55 wrote:

  I am new to 4.2. I created an application on 4.1 and exported 4.1 and imported to 4.2. I'm trying to view the forms as they were posted in 4.1. But I have problems with the presentation of the grid. The elements are the overlap between them and the regions is narrowed.

  Why you want to switch to theme 25 instead of simply retain the theme that was used in 4.1?

  Go wrote:

  Robert,

  Look at your application. just a simple change.

  change:

  Region: Veh/equip Information

  Presentation of the grid:

  Start the new row: Yes

  That helps, but it's not the whole story, as it appears the layout is still affected by the problem described in the thread previous Theme 25 region without buttons and issuance of securities

  Applying the fix I suggested it (in 78449 application I created a copy to ensure that I was working with the initial problems) Gets the items on the same line, but I guess that's not the same as the original provision and it doesn't look very good.

  Basically, I would say either stick with the original theme or by switching to a 4.2 theme that still use the page layout based on a table (for example, 24 or 26). Theme 25 is difficult to work with and works best with presentations created especially for her from the start.

• color in CS4 are not correctly displayed since the upgrade to windows 10

  I have upgraded to Windows 10 last week and I had problems with colors does not display does not correctly in CS4. I tried to take a screenshot of exactly what I see in CS4, but when I post it online it seems fine. Telling me that something is now display properly in CS4. It also happens in LR3. When I post the photo online or look at him in the Windows Photo Viewer, it seems. I took a video of what is going on, but the quality is not so great. I apologize. Can anyone help? I have been searching the Internet for two days and can't find an answer to my problem. I went to the Intel website and there is not an updated video driver for my graphics card.

  Most likely you have a bad monitor via Windows Update profile. Manufacturer profiles are notoriously unreliable and often faulty and should always be avoided.

  This will only affect the applications of color management that actually use the profile.

  Recalibrate, or if you have a calibrator uses sRGB IEC61966 - 2.1 until you get a.

  

  Restart Photoshop when done so he can pick up the new profile at startup.

• Site does not correctly display on the Samsung Tablet

  Hi all

  I've seen a few questions about Muse sites not shown correct on a Samsung tablet. My problem is similar but even more. The site is the correct display on computer office/ipad/iphone but not on the Tablet from Samsung.

  In the previewt its is not displayed. Now, I also know that the preview more or less simulates how a site should look like.

  This is the site: www.uwpersoonlijkeoptieadviseur.nl (Dutch site).

  I looked at the links and they seem to be ok. I mean all the links link to the version of the tablet.

  see you soon,

  Larry

  Great!

  Yes, that would be a problem with browser itself that you understood.

  This can happen if the browser is not updated with the older devices.

  Thank you

  Sanjit

• CSS is not correctly displayed in Firefox

  My new CSS layout is beautiful in IE7 (weird), however, it does not correctly render in Firefox. I always do some research before posting here, but I'm completely helpless now. I'm very new to CSS, this is my first page I put on the use of this language. Virtually none of the higher margins work, and my image of false column does not appear. I will attach the HTML and the CSS and see if someone can point out what's wrong with Firefox.

  nowherecreative wrote:
  > My new CSS layout is beautiful in IE7 (weird), however, it is not made
  > correctly in Firefox. I always do some research before posting here, but I'm
  > now completely impotent. I'm very new to CSS, this is my first page I put
  > on the use of this language. Virtually none of the higher margins are not working and my
  > does not display a false image of columns. I'll join the HTML and the CSS and see if
  > can anyone point out what's wrong with Firefox.

  Hello

  Try floating this rule #page - container2 left.

  HTH

  --
  Chin chin
  Sinclair

• Edge .oam file is not correctly displayed in the DPS.

  Here's the scenario.  I have an animation I created for an article of DPS (Digital Publishing Suite) but it does not display correctly and I can't understand why.  It displays is too large and goes past it's bounding box or it displays too little.

  Article DPS is set up for a 2048 x 1536 retina display.  The animation was created at 400px by 100px and saved on a file .oam must be deposited in Indesign to use in a DPS application.

  The problem is that when placed in Indesign placed animation does not display correctly.  If you change anything in Indesign in the "Folio overlays" Panel under "Web content" animation will play much too large and extend beyond the bounding (Image 2) box.  If you check the scale to fit in Indesign too small poster.

  My question here is that nobody knows if I'm missing a step on the edge of Adobe that may cause this or if you know why he would do this in Indesing would be great as well.

  I see not all the parameters of resolution on the edge and normally pixels are pixels and resolution is not important but it when the PPI is higher on the iPad.

  Animations do not work it's just sizing.
  

  The first image shows how it should look like at the end of the animation. "(the classic) is the animation part."

  The second image shows how it displays when it is set to no change in Indesign.

  The image below shows how it displays when placed in Indesign with the "content to Fit scale" checked in the "Folio overlays" Panel under "Web content", too small!

  Any help or suggestions would be greatly appreciated.

  Sincerely, Ryan.

  

  It is a known problem with the creation for the retina in DPS, I met last year, when the retina is first released.

  If you try to save in pdf folios go png or jpg. But the best practice with DPS is at the 1024 x 768 folio woth beginning and create assets to a higher resolution.

  try to create the dps page 1024 x 768 see if she double size then, bet that's not :-(

  I hope this helps... sort of

  Alistair

• Reddit is not correctly displayed after upgrading Firefox.

  Although I have been very reluctant to do so, I've just updated Firefox to version 34.0.5 and I have just about everything you want / work as I want it, but for some reason, I'm having some trouble with Reddit is not displayed correctly. If you take a look at the screenshot I attached, you can see that the CSS seems to be twisted. This does not occur on another browser and it has not happened before I updated. I tried to clear my cache and cookies, but that has not made a difference. I also tried to start Firefox in Mode safe with all disabled add-ons, but the problem persists.

  In addition to this, I'm having a problem with Firefox spare no no not the status of pages when I go back or forward. I want to say is that while browsing a thread on Reddit, if I collapse several comments, then click on a link, when I return to the thread, comments will be is smaller. Firefox is basically refresh the page whenever I got leave and come back, which I don't want. It wasn't a problem before the update and so far, it seems to be only a problem on Reddit (but I have not fully confirmed this).

  What can I do to fix these problems? Any help would be appreciated!

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can open the Web Console (Firefox/tools > Web Developer).
  Check if the content (CSS) is blocked and has a file size 0 (zero) in the network tab.

  You can delete all data stored in Firefox with a specific area through "Forget this Site" in the context menu of a history entry ("" history > view history "or" view > sidebar > History "") or via the subject: permissions page.

  Using "Forget this Site" will delete all data stored in Firefox in this area as bookmarks, cookies, words of past, cache, history, and exceptions, so be careful and if you have a password or other data from that domain you don't want to lose then check that back up these data or make a comment.

  You can't recover from this "forget" unless you have a backup of the files involved.

  It has no lasting effect, so if come back you on such a 'forgotten' site, then the data of this Web site will be saved once more.

• Firefox will not correctly display some web pages and addons can not be installed.

  I just installed firefox to the computer after the installation of the Windows 7 operating system.
  It does allow me to install an addon in the browser. In addition, it does not display the page addons firefox and github.com. (only plain html is displayed without CSS any kind of things)
  I tried to remove cookies, remove stuff history and running in safe mode. None of the methods worked.
  The web pages above perfectly displayed in other browsers on the same computer.

  Hello deamonpog, please make sure that your system date, time and timezone are correctly set!