Point click mouse is not accurate

Similar Questions

• When I left click point mouse does not open?

  When I left click point mouse does not open? I often have to right click and click open to open an item. Mouse not working not properly.

  Hello

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, you are having problems with the mouse does not.

  1. what operating system is installed on the computer?

  2. What is the brand and model of the computer?

  3. do you get an error message when you click on an item?

  Meet us if you encounter problems with the mouse does not or any other problem of Windows, and we would be happy to help you.

  Good day!

• Right click mouse to drag and drop or rename folders and files does not work

  For a few weeks now, I had problems with the right click function to drag - move files and folders, or rename files and folders. This happens when I use windows Explorer or access to the computer and click thruogh for a feature. He can't go to all the folders and files, but many. I can't right click on these folders or files to change the sharing because explore closes and restarts on the desktop with a right-click. Manifest error "appcrash" reason. I have Norton Security suite installed and neither Norton or your fix program detects a problem.

  Please notify.

  awehnert

  Have you installed or removed/uninstalled all hardware or software or drivers since just before the start of this problem (if so, exactly what - name, version, device, whatever)?  Norton take any infection, although it is said that he cleaned their since just before the problem started?  If so, you know the names of these infections?

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  It's been a while so I'm not sure that you have a fairly old restore point but it is possible - hopefully.

  Are these files and folders in your user profile?  If Yes, your user profile may become corrupted (in fact, if can still be corrupted if the folders are not there).  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.  If that is the only available Administrator Profile (you need to be an administrator to fix this), enable the Hidden Administrator Account (HAA) using http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?&lang=en&cr=US&guid=&sloc=en-us&dg=microsoft.public.windows.vista.administration_accounts_passwords&p=1&tid=d20f9db4-7b2c-48be-a087-7835dc2a9055&mid=d20f9db4-7b2c-48be-a087-7835dc2a9055.  If you don't remember the password, try nothing because that's probably what you (or seller) did during the installation.  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.

  We will check some of your system files and hard drive for ccorruption that may be the cause:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  Try to put all the corrupt files here so that we can see if they can be repaired with good copies of the installation disc (unless there are too many).

  While in the command prompt, type chkdsk /f /r and enter and let it run.  She might want to plan itself to start at the next startup.  Okay, then restart so that the program can run. It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  Please checkwith the manufacturer to find out if there is a mouse driver updated (software or firmware) available for your make and model of mouse and your version of Vista.  Download and install to update the driver to the most recent available and see if that solves the drag and drop problem (even though I know that this will not affect the question of the name change).  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  If it doesn't (or if SFC detects corruption it cannot repair), we you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. You can have a lot of updates to re - install (including all you need to remove service packs).  If the version of the system came with SP1 or SP2 preinstalled and the disc is an earlier version, then you will need to make a record of slipstream as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Left click of the mouse does not respond in the office and I could see 2 together (Picture) Office

  Everything works well today that the left click of the mouse is not responding on the desktop (icons does not meet the double click). Right click works ok, and left click works well on programs and in the taskbar.

  Weird things here, it's that I can see two desktop at the same time.

  I have attached a picture.

  Can someone help me?

  Thanks in advance.

  

  I got disabling the system restore, so I can't go back to a good version.

  Turn off the system restore makes things much more difficult. Your problem is probably due to an inappropriate registry setting. You can restore your registry files manually to a previous point through the steps described below. The process is complex and requires some careful typing. Ask a computer-savvy friend to help you if you lack experience in this field. You may reset your password to an earlier value.

  Check the date of the file C:\Windows\System32\config\regback\System. It precedes the date when you became aware of your problem? If so, follow these steps:

  1. keep tapping F8 during the first phase of startup.

  2. Select repair in the menu that looks like this.

  3 log in as administrator if you are prompted.

  4. Select repair when prompted.

  5. Select the command line in the menu that looks like this.

  6. identify the correct drive letter for your Windows installation. It could be one drive other than c, but it will not X:. You do this by typing commands
  DIR C:\Win*
  Dir D:\Win*
  dir E:\Win*
  until you find the Windows folder.
  I'll call this "Q:" drive
  7 type these commands exactly:
  CD /d Q:\windows\System32\config
  xcopy *. * Q:\MyRegBack\
  CD RegBack
  8 type these commands:
  copy software / y...
  /y copy system...
  /y copy Sam...
  (the two points are part of each order)
  10. restart normally. If things don't work then you can go back by copying files from the original register of Q:\MyRegBack to Q:\Windows\System32\config.

• Clicks of the mouse do not work in IE9, Excel, iTunes and other programs.

  Clicks of the mouse are not working.  IE9, Excel, I-tunes and a few other programs.  It sometimes takes several mouse clicks, or in the case of IE9 when you activate the address bar or Favorites or even try to select a checkbox it seems that you must hold the button of the mouse down and after a few seconds, it will recognize the command.  With favorite IE9 you must hold down the mouse button and drag down to the place wherever you need to be communicated, then click on?  In Exel, the mouse cannot select multiple cells, in other programs her taking mulitple mouse clicks to highlight & copy text in the text example I've copied below from Microsoft answer Forum - I followed the instructions below and it did find and fix some problems, but there were others, he could not correct?  They were listed in another file, but I don't remember the name of the file, or how to access it?  I have run Norton 360 on my system and a complete analysis will detect all viruses?  Please advise?

  Thank you for using the Microsoft Answers forums. I suggest that you run the System File Checker. To use the tool (SFC.exe) System File Checker. To do this, follow these steps:

  Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  Type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  Thank you

  Andrew Pugh

  Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  Finally if all else fails, you can look at the rather cryptic system event log. To do that click on start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

  -

  I hope this helps. Good luck.

• After using my Firefox browser to access my Yahoo mail, I don't and then disconnect. Left click of my mouse will not sign off the coast. I have to close my computer to close my e-mail address. How can I fix?

  I'm unable to sign my e-mail at Yahoo. Make a left click on the mouse does not close my e-mail address.

  Hi ampterson.

  It could be that an add-on is causing this problem. First, click on the Firefox button > help > restart with disabled modules. If this solves the problem, it means one of your Add - ons is the cause. See Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems for steps to know which.

• Satellite C660 - click of the mouse does not work

  Hello

  I bought this laptop 5 weeks ago and now have problems with the right, click on the mouse does not work. Left click sometimes opens to the left, click on functions and leaves me is impossible to close programs or closed, double clicking in the pavement or enter does not work also.

  I tried to do a system restore to the factory, but I can not click on the next to take me through the restoration and end up having to close it via the main power switch.

  Any ideas please?

  Hello

  You have the same problems with a mouse external or just the touchpad?

  If an external mouse works correctly, you can use it to do a recovery install. This can help you to solve the problem, if this just s software.

  Not least have last but you tried to update the driver for the touchpad? You can find it on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• Click on the mouse does not work

  I'm on an iMac ca 2008 and the mouse cursor moves on the screen, but clicking on does not work. No action in any application. Will not open files, no command is executed. Initially, it was casual, but happened to be the worst, now it is complete, start at the stop. At the start (in El Capitan), the mouse moves the cursor, but there is no answer to the click. I went through the first aid standard attempts-trash finder prefs, reset the NVRAM, reset the SMC - no change.  Elsewhere in the forums, the problem is attributed to the El Capitan, or if no GPU. BIOS problem? It seems to be a hardware problem, but I'm no judge of that. Any suggestions?

  You probably need a new mouse.

• MS point 5000 laser wireless mouse does not work, but scrolling and magnifying glass works

  My point of 5000 MS wireless laser mouse does not work, but work wheel Magnifier button and scroll.  What could cause this problem?  I there something wrong with the mouse or something should be cleaned?  This is the first question I had after 3 years of use.

  I have not any hardware or software changes, and the problem is constant, not specific to any application.

  I restored my system to my latest backup when the mouse was working, but it has not solved the problem.  The software update has not solved the problem.

  I installed a different mouse, which works very well. The wireless mouse does not work on another system, I assume that it's broken and I will replace it.

  Thanks for your suggestions.

• My keyboard and mouse do not work. Can't click or type anything.

  Original title: keyboard and mouse

  Hello, my keyboard and mouse don't work I can get on at the office but can't click on what whatsoever as the two keyboard and mouse do not work I tried the BIOS but still couldn't have tried different keyboards and mice, and they do not work or do not know what to do please help

  Hello Shirley,

  ·         Have you checked if the same keyboard and mouse work on other computers?

  ·         Are these PS/2 or USB devices?

  ·         You did changes to the computer before the show?

  Method 1: Try to connect the keyboard and mouse even to another computer to see if they work.

  Method 2: If they are PS/2 devices, then try to connect to USB devices to check for the issue or vice versa.

  Report of the results.

• "Right click on the mouse do not work"

  Mouse: OP:
  The right click on the mouse does not work. How should I do?

  Hello

  You can view the configuration in the Control Panel, mouse.

  However, if the rest of the mouse does not work, it is probably time for a new mouse. For example, right-click switch does no more work.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• the desktop icons getting not selected & right click of the mouse does not

  When I start the system everything is normal but after completing the office do not get selected items either through the mouse or the touchpad and even click right does not work. Search Advisor.

  Hi Kishore Peddi,

  You did changes to the computer before the show?

  Method 1
  I suggest you to run the fixit from the following link:

  Difficulty of broken desktop shortcuts and common system maintenance tasks
  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us
  
  Method 2
  Step 1: I suggest to start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

• My left clicker on my mouse does not work?

  My left clicker on my mouse does not work properly. The right clicker can be used to select things. I don't know if something has been disabled, or if my mouse must be replaced. What should I do?

  Hello

  Control Panel - mouse - for left-handed. If the opposite problem on the other side
  Then, the mouse has a problem and needs to be replaced.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Do right click on the mouse does not.

  Bought a new computer with windows 7 pre-installed touchscreen and the latest internet explore. The "right-click" wireless mouse doesn't work at all on the desktop or start menu Explorer etc. Is - this mouse does not, or something else. I connected a wired mouse and the same problem.

  Thanks for your reply. Turns out to be a faulty mouse. Changed for the wired world is fine.

  Thanks again
  siltmanstewart.

• Click right does not work properly in the Microsoft Sidewinder X 8 mouse

  Original title: microsoft sidewinder x 8

  Hi, I had a sidewinder x 8 micrsoft. I love rly. but since yesterday I have a problem strange rly. If I click on the right button of the mouse the mouse starts clicking on itself. Click, click, click, click. then I click right button again and it stops. It's rly boring. I went on a normal USB mouse and it works if this isn't a problem with win 7.

  yesterday, I've updated like everything.

  NVIDIA, win7, chipset intel, new mouse and keyboard software microsoft, update virusprogram and scan, firewall updated.

  the first update was the new nvidia update. 1 hour later the problem, after that I've updated everything.

  Hi PatriceA,

  Thank you for joining Microsoft Community where you will find all the necessary information on the windows!

  Click right does not work in Microsoft Sidewinder X 8.

  Check the mouse in another computer to make sure that this is the problem with the device.

  If the problem occurs with other computers as well, then I suggest allows you to obtain assistance at the Microsoft site for technical support for hardware problems.

  See the site:

  http://www.Microsoft.com/hardware/en-us/support/troubleshooting

  You can also consult the site:

  http://www.Microsoft.com/hardware/en-us?WT.mc_id=hwvan

  I hope this helps. If the problem persists, let know us and we would be happy to help you.