point of order

Similar Questions

• Calculation of adjustment of 3 Points 2nd order polynomial curve

  Hi all

  I wonder if there is a simple way to calculate the coefficients a, b and c in a 2nd order polynomial of the form equation

  y = ax ^ 2 + bx + c

  given 3 points known.

  Is there a LabVIEW function that can do this automatically?

  Thank you!

  -FB

  I think you're looking for a general Polynomial fit.

• How can I set opacity points in order to achieve a fade on the effect?

  I know how to create a fade in opacity on effect using the "elastic" in the video clip.  I would like to be able to define multiple points of opacity for a clip using the effect controls panel.  This approach is possible?  Thank you.

  If you hold down the ctrl key, you can add keyframes of video.

  http://help.Adobe.com/en_US/PremierePro/CS/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7e74a .html

• In what order are anchor command left and right control point values returned by entirePath()?

  The entirePath() returns the anchor points that have two values, or it returns an array with three coordinates. I would like to know, in this case, what is the point of anchorage, control point index and values of point of order from right to left?

  The three values are leftDirection, the point of anchorage and directed. 'leftDirection' and 'directed' compete in the competition for the worst property names, because they have nothing to do with the left and right. Publishers of fonts and other programs that deal with the use of the perfectly transparent Bezier curves "in" and "out." These words make sense. Adobe of not.

  To find out what values stand for, draw a simple curve with three points, then use a script to write the values to the console of the ESTK. Open the transform Panel and check the values it that that you printed in the console.

  A major problem in all of this, is that when you select a point with the direct Selection tool, app.selection [0] does not return this point (I forget now what it returns) and get a handle on a selected point is an ugly hack.

  Peter

• Cannot display the properties of field point

  Hi all

  Can someone tell me why I couldn't open the properties of field point in order for me to configure my modules?  I am always active on LabView 7.1 and I used 3 express VI. They worked before and all of a sudden, they are not. I tried opening and closing (even restart the computer) and still not be able to open VI properties for these 3 VI. What's weird, is that all other programs that were made before this one, they all have the same problem as well. Pls I would like to know if anyone knows anything. A picture of the problem I get is attached.

  Thank you

  Marcos

  Hi James,

  Thanks for the quick response. I have NEITHER Point field driver installed and I believe that his version 5.0. I'll do the upgrade today.

  All express VI were available on the palette and it does not have the same error whenever I place on the block diagram.

  I mentioned that he was working before because I was already using the program and it worked fine.  All of a sudden I was getting more data by class Point. I thought it was the FP Module, but it came out that the Express VI were not read/write more. The whole installation has been done about a week ago and nothing has been added after that.

  Is this another bug in V7.1?

  Anyway, we were a little short time for and we solved the problem by a field Point and put it back, once again. I hope that this does not happen again the update.

  Thanks again and I hope that there is a better solution than what I did. I'd appreciate any input on this issue.

  Kind regards

  Marcos

  PS: Relatively new on this site, how do you Kudos?

  Kudos to James for a helping hand.

• Why are the dissappearing of restore points?

  Greetings my friends more excellent.

  Today, I come to you with an interesting and aggravating situation that happens with my computer, but first the technical stuff. I have an old two-year Dell XPS studio 8100 computer Windows7 Home Premium 64-bit sp1. Now since a few days I noticed that the system not to do the restore points and to be even more confused it is clear the manual restore points that I put. Last night before going to bed I manually restore 30 minutes two points stand out. I just checked this morning and sure enough they have restore points have mysteriously disappeared?

  If any of you smart people know why and how the of to fix this problem I would be to always in your debt if you send me an email with the instructions to fix this problem?

  Truly and sincerely, TiffanySnow47

  The first thing that comes to my head is under Windows there is an option on how much of your hard drive that you use for the system restore and this reaches the limit, he will begin to remove the oldest restore points in order to have more recent points.

  If this is the removal of the recent restore points and keeping older, then it is another problem that I don't not everything, but you can check it out and see if it solves your problem.

  1. Open system by clicking the Start button, right-click computer, and then clicking Properties.
  2. In the left pane, click system protection. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Under Protection settings, click the disk and then click Configure.
  4. Under disk space, move the slider to the right to increase the disk space that system protection can use or move the slider to the left to decrease the disk space.

• How to create the sample Order Manager of Transformation (OTM) cartridge

  Hi all

  I tried quite pointless to create a cartridge OTM sample.

  I created a sample orchestration cartridge, and it has 2 functions: supply and FulfillBilling with a dependence on Provisioning for FulfillBilling inside a model completion Service.Voice.

  I created an example of template with the design template project, and it has created some entities by default like stocks and other stuff.

  First, I created a fixed domain in the conceptual model. Then added a product "Voice_PS". I have create a CFS called "Voice_CFS" under "Voice_PS" with a primary relationship. I added the fulfillment of coceptual model 'Voice_FP' product 'Voice_PS '.

  After that, I created MappingRule which I kept as a default because I haven't created any parameter of Voice_PS.

  Then I create the parameter bindings of controls and that I kept also by default because I didn't take all the parameters command line group specifications.

  Then I called design model to create a Service order. This gave me the sequence of Transformation and in the first step, I added simple context Type for parameter OLI ProductSpec = "Service.Voice."

  I use the same specification of element of order for the transformation of source and target texts. To do this, I checked the box «Model order» distributed support

  I created the processing Manager and mapped the area and the sequence of Transformation.

  After that, I marked the "Transformation Manager invoke" the Orchestration process verified and gave to the service provider that calculate the Service order.

  I pulled an order after you have configured all of this and I'm getting line continuation in the DEBUG log.

  < 22 January 2015 07:56:26, 289 PM IST > < DEBUG > < transformation. OrderTransformationManager > < ExecuteThread: "14" for queue: 'oms.ws.http' > < transformation OTM invoked with cartridgeId: 353, service provider: {OracleComms_Model_Base_Cartridge/1.0.0.0.0}Calculate_Service_Order, 3 points of order >}

  However if I open the order I can't control elements transformed under the control elements in the left panel.

  What I'm doing here wrong or missing?

  In the tab "Property references" specification of element of order there is also a field 'Order recognition Item property' which I mapped to a property returning my original ESP entity that was the Product "Voice_PS" entity

  However, I constantly get this error for her.

  < 23 January 2015 10:12:35, 832 IST AM > < WARN > < generation. XQueryEntityResolver > < ExecuteThread: "14" for queue: 'oms.ws.http' > < can't find the person identified by namespace = COM_SalesOrderFulfillment; name = Voice_PS; type = T = OrderItemParameterSpecificationType @http://xmlns.oracle.com/communications/ordermanagement/model>

  I have a feeling that the OSM requires no conceptual entity to this place but what it should be, that's what I don't get.

  Any little help will be welcome, because I feel really bad for the last 3 days.

  Hi all

  After almost a month to research on the OTM configuration, I was able to successfully create a cartridge with OTM.

  The thing is that oracle has tried several things to ensure that you do not work on OTM without taking training from Oracle University. However working for an Indian Council COMPUTER company, cost of training is something that approve all IT managers. So now I would like to register 4 things I was missing and which are very important for the configuration of the OTM: -.

  1. one thing that has not always been productSpecMapping.xml with the conceptual entities. This was achieved after dependence conceptual cartridge cartridge model fulfilment and realisation configuration and then the construction of the entire workspace. Reason for satisfaction was derived from this mapping.

  2. Although the DS is built as entities in the workspace are available for configuration, however, when you select the realization within the OSM entities the conceptual entities are not visible. Only if you bring a dependence of the cartridge to cartridge of the conceptual model to the OSM cartridge where you configure realization so only the conceptual entities begin to appear.

  So in my cartridge missed me 2 achievements. One was the realization of the conceptual model entity model fulfillment OSM entity fulmillment. Second has been the achievement of entity area conceptual funcational to the OSM order entity.

  3. the next thing that I configured and which was essential was 'container of entities in the common model. This tab appears on all files in all projects cartridge. Basically this allows you to select the project template that contribute to this project. As soon as I have it configured OSM began to detect OrderItemParameterSpecificationType entities.

  4. the wierdest configuration that I found was this one. After trying the previous point, I found that even if the entities are now be created, but again I was getting OrderItemSpecificationType entity not found. So I cheked in the cartridgeBuild folder to check what is created in the backend before deployment. I found that for some reason any was not Voice_PS but Voice_PSSpec. So I started concatinating "Spec" to all entities of the product in the order entering the property of recognition element OrderItemSpecification order. Please note that my order of recognition property point was not "Voice_PSSpec" but rather the value "qualifiedName" derived from the productSpecMapping.xml to the node with the value of the name attribute as "Voice_PS". For more information look at this post of me some time. OSM 7.2.4 cartridge

  And now my cartridge started grateful OTM. However I did a wrong configuration in order for transformed model controls inside functions so I quickly corrected and pulled another order. This time I could see the elements of order and turned the control elements. Phew! Finally his work.

  Now I spent enough time on this, I'd be happy to help those who are struggling to set up OTM.

  Kind regards

  Magalhaes

• Which component creates by default profile and order objects?

  Hi all

  As we know that whenever we visit the shopping page online, a default profile object and the Order object are created. Can you please tell me what component creates these objects?

  These objects even though the home page is a static page?

  Creation of ATG profile:

  Only the profile will be created whenever we visit any page in Application of ATG.

  ProfileCreation enters the servlet pipeline "ProfileRequestServlet", so for any request if the profile does not exist, it will create the profile.

  But it is also possible to avoid the creation of profile by registering only not in the servlet pipeline string. Execution of the servlet pipeline coming with the help of pagefilter for jsp.

  So using the page filter you can avoid him. IE not let all the jsps through PageFilter.

  Page filters are defined in the web.xml file.

  PageFilter

  atg.filter.dspjsp.PageFilter

  PageFilter

  *.jsp

  Order of creation in the ATG

  There may be several points of outbreak of the order is first created.

  • When we add point to order using OOTB form of management methods, if the order is not output, ATG will create an order object and add this item in the agenda.
  • At any time, if one refers to the ShoppingCart component, if there is no order, ATG will create an order.

  Kind regards

  Nitin.

• You place your order by comparing - SQL Experts pls help

  Hi all
  
  I want to measure the closest points according to the percentage between these points and order.
  in other words, I want to show the relationship between the points according to the percentage value.
  

   
  drop table temp_value; 
  create table temp_value(id number(10),location varchar2(20), percentage number(9)); 
  
  
  insert into temp_value values  (1,'LOC 1,2',30); 
  insert into  temp_value values (2,'LOC 1,3',0); 
  insert into  temp_value values (3,'LOC 1,4',0); 
  insert into  temp_value values (4,'LOC 1,5',0); 
  insert into  temp_value values (5,'LOC 1,6',50); 
  insert into  temp_value values (6,'LOC 2,3',0); 
  insert into  temp_value  values(7,'LOC 2,4',0); 
  insert into  temp_value values (9,'LOC 2,5',0); 
  insert into  temp_value values (10,'LOC 2,6',10); 
  insert into  temp_value values (11,'LOC 3,4',90); 
  insert into  temp_value values (12,'LOC 3,5',80); 
  insert into  temp_value values (13,'LOC 4,5',0); 
  insert into  temp_value values (14,'LOC 4,6',0); 
  insert into  temp_value values (15,'LOC 5,6',0); 

  I want the output like this, the ranking of the point like this

   
  4 
  3 
  5 
  6 
  1 
  2 

  or like this

    6 
  1 
  2 
  4 
  3 
  5 

  If you ask me why I say this ranking only

   
  
  4    [90 percent between point 3,4 that mean can be 3,4 or 4,3] 
  3 
  5    [80 percent between 3,5 that mean can be 5 after 3,4] 
  6    [50 percent between 1,6 that mean can be 1,6 or 6,1 ] 
  1 
  2    [ 30 percent between 1,2 that mean can be 1,2 or 2,1] 

  concerning
  
  Published by: Isabelle October 6, 2012 10:18
  
  Published by: Isabelle October 6, 2012 10:43
  
  Published by: Isabelle October 6, 2012 20:04

  SQL> select loc
    2  from(
    3  select loc,rownum rn
    4  from(
    5  select percentage,location,regexp_substr(location,'\d+',1,rn) loc
    6  from temp_value a,
    7       (select 1 rn from dual union all
    8        select 2 from dual ) b
    9  order by percentage desc,to_number(regexp_substr(location,'\d+',1,rn)) asc
   10  ))
   11  group by loc
   12  order by min(rn);
  
  LOC
  --------------------
  3
  4
  5
  1
  6
  2
  
  6 rows selected.
  

• How you Zip a very large PowerPoint file to email?

  How you Zip a very large file Power Point in order to send email?

  Select the .ppt file. CTRL - or RIGHT click and select compress... from the context menu. There is no assurance that zip the file to reduce its size enough for your needs. In this case you'll need a third-party utility that can split archive into several parts such that you can send each part in separate emails. Notify the recipient which utility you used to replace parts in the file size.

• Satellite Pro A200 - hard drive has lost half it's memory

  I have a toshiba Satellite Pro A200 on Vista. Vista came preloaded and I not all disks for it. I got it from the new (Sept 2007). The hard disk is divided into units. Recently my C drive has filled competely and I now no space left (went 55gigs) I store some data in this drive. All my multimedia elements (music, photos, and other files) is in my E drive. I have to run C Cleaner whenever I start in order to have enough space for the operation of the computer. I also remove all but the last restore point in order to function.

  I am at my wits end and think I must have a virus or something. Is there a way to restore the computer to the 'new '? I have all my files backed up on an external hard drive, so I don't mind from scratch. Not keeping in mind I have no install discs as Vista came preloaded.

  Can anyone help? Please, I beg you!

  Hello

  If you don't have a recovery disk, you can order from Toshiba for the money. Otherwise, you can get copy of Windows and installed with the drivers of Toshiba (http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp)
  Then, you mentioned that hard drive has lost half it's memory, tell you if it was ok before but not available? Please check disk management, utility of the Panel. What is shown here?

• HP Pavilion dv6 Notebook PC: hp simplepass 2012, do not configure Windows 10

  I recently installed the Windows 10 operating system, as many have, and I'm having a problem with SimplePass 2012.

  The reader will not be 'new' prints to access my account.  (I made a new admin ACCT, after having the issue "Critical Error" with the W10 start menu.)

  I tried reinstalling the SP 2012 program to fix any problem of corruption, and the stalls of the reinstall at the stage of "Please wait while Windows configures HP SP 2012."

  Any thoughts?

  @Ronaldgg

  The oldest program of series 6 HP SimplePass not was not written to run on Windows 10 although I heard that it will offer service on the new operating system Windows 10 indeed.

  I hope you have at some point in the past remembered to export your Webcards. If it is necessary to remove and then install the SimplePass program, you will need this backup on importation of your Web sites / passwords again in the SimplePass database.

  I can offer the following:

  ===============================================

  HP SimplePass upgrade instructions

  Read the first page: Dragon Document guidelines

  Topic title:

  Procedure - updated / (install HP SimplePass Re)

  ===============================================

  General considerations:

  • Windows updates must be installed and up-to-date before installing HP SimplePass and / or repair operations
  • You can create a Restore Point in order to protect your 'place in the sand '.
  • If you have not previously exported your Webcards: you may lose your Webcards (Web site passwords). Assuming you get the program to work, but still manage to lose the existing database, this means that you will have to perhaps start and reset (back) all of your websites and passwords. Proceed at your own risk.
  • There are two sets of HP SimplePass:
  • AuthenTec series 6 HP SimplePass and Softex series 8 HP SimplePass
  • The two series are not compatible with each other
  • You cannot migrate from series to series (or back)
  • You can "pass" series

  ======================================================

  Driver is first!

  The pilot of validity must be (re) installed first, i.e. before the SimplePass program is installed, repaired or otherwise manipulated. It's hardware - fingerprint reader and his driver - be ready when other programs 'come on board'.

  Looking for a Driver for sensor of validity at least for Windows 8.1 - better Windows 10.  If site supports your computer Web page of the driver does not provide a driver, there may be in the document, you can use a compatible driver.

  See the titled subject: Bits and drivers

  ------------------------------------------------------------------------------------

  HP SimplePass is planned

  Next: once you have installed / reinstalled your valid driver and restarted the computer, decide what methods will offer the best chance to get the HP SimplePass working on your computer program.

  NOTE: success may require more of an essay or a combination of methods. the program is old and different environments.

  • Repair your program's existing HP SimplePass (database) in programs and features
  • Download the latest version of the 6 series HP SimplePass and overload manually (installation) program on top of your database (program)
  • Remove the program HP SimplePass existing in the system > Reboot > download and install the last programme of the series 6 HP SimplePass > if available, import your file, .tsd (Webcard backup)

  Finally:

  • Switch to series 8 HP SimplePass for Windows 10. Note that you must reset it, i.e. to create all your passwords site Web from scratch. You cannot 'import' your 6 HP SimplePass in series 8 HP SimplePass series password database. Don't forget: the two series are different programs.

  ======================================================

  General note to my readers:

  A reminder that my comments, documents and advice are mine and not a product of HP.

  Your comments are welcome - please remember to remain civil and in favor of our team of volunteers and members of the HP forum.  Thank you!

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Satellite P300D - 12L - Pentecost of the cooling system problems

  I have a Toshiba P300D 12 L and I have problems whit the cooling system.

  Wich, cooling pad is recommended for this laptop.
  I don't know what type of cooling pad I could buy.

  Can u recommend one please?
  Thank you.

  Hello

  I assume you mean on the cooling module
  Well, each piece is created specially for each series laptop
  This means that you need a cooling module that is compatible and designed for the satellite P300D.

  All compatible parts can be ordered from local ASP (certified partner).

  Therefore, there is nothing to do to get in touch with a local service point and order the necessary parts

  Notes; disassembly of the laptop is tricky not easy as with desktop PC
  That is why the cooling modules should be replaced by a professional

• Update of waveform outside under VI

  Hello

  I have a fairly complex (for me!) program with several sub VI, pressure measurement loop calls main VI a VI void is a while, each value is plotted on the graph of the waveform is measured in real time. I want to display this graph in real time in the main VI. However the table of waveform in the VI main shows only the last delivered value of sub VI after the sub VI has finished its execution of the loop.

  Is there a way to configure the waveform table in primary VI to only show data in real time to know duplicate what the table VI of void?

  Thank you

  It seems simple enough.

  Refer to the map of waveform control (by right-clicking on the graph > Create > reference) and place it in the main VI Subvi. The sub VI must have a point of order of the same type. Within the Subvi, you can update data using a property node. If you want to update the chart in each iteration of the loop, use the node property inside the loop.

• Westell 7500 can not see AP wnr834bv2

  I had a nice home network consisting of a WGR614v5 in one place, powered by a 660 modem and a WNR834bv2 configured as an AP in a more convenient location to provide wireless connectivity to my wife and my laptop.  I could access both routers to change the configuration options (turn wireless switch) by their IPS (192.168.1.1 & 192.168.1.200 respectively).

  Then "lightning" stuck nearby and pulled the 660 modem and WGR614v5 router.  My provider was willing to replace them, but with a Westell 75002207 wireless modem/router combo.  The installation went well except, this unit converts all IP addresses, attached in 10.0.0.X.  The only device, it doesn't have to be converted was WNR834bv2 AP and it's because, I guess, he could not "see."  No matter how many times the new router 'scans', he never finds 192.168.1.200 (WNR834bv2).

  Because I, I can access is no longer (when you go away, I usually turn wireless off) by it of IP address of origin, even isolated from the rest of the network, or no matter what other 10.0.0.x I try within the new range of routers DHCP.

  Can someone help me understand why this is happening?  And by the way, the WNR834bv2 works yet it's wireless and wired functions perfectly well, I just can't get it.

  Signed, confused Gwlindq ;-)

  Yes, the problem is that (most likely the new main router) DHCP server is the allocation of units 10.x.x.x who cannot communicate with address 192.168.1.200.  To work around the problem of IP address, you need to set a static IP address on the device.  Simply plug wireless access point won't be enough in most cases.  Whenever I have install an access point, I always disabled the DHCP protocol to the access point in order to avoid any potential conflict.  In some cases, might manually configure the router DHCP pool and the access point to prevent its contradictory.  However, according labels what Netgear unit, I suspect you are routers in Garland instead of a router and an access point.

  The bottom of this document details how to set a static IP address in Windows XP.  Set the static IP address for 192.168.1.201 (No 192.168.1.200 as argued already) with the subnet mask that uses 192.168.1.200 (default should be 255.255.255.0).  Once the PC has a static address that works with the 192.168.1.200/255.255.255.0 access point, you should be able to access it, and then make the necessary changes.  Alternatively, you can change the new router to issue addresses in the 192.168.1.X/255.255.255.0 range, and it should work as it did before.