Satellite Pro A200 - hard drive has lost half it's memory

Similar Questions

• On Satellite Pro A10 HARD drive replacement

  Hi all

  Ive currently got my moms Satellite Pro A10 sitting in front of me. Wouldn't load XP at all so I downloaded Knoppix and ran the liveCD on the laptop. After some tests, it seems that the HARD drive has failed.

  The vehicle currently has a 30GB HDD (MK3021GAS HDD2182 B ZE01 T) with a rated output DC + 5V 0. 7A.

  Told me that any HARD drive would work so I ordered a replacement of 100 GB of Fuji, except its a little too long to drive HARD case and it seems to be the cause of my power light flashes orange. Rated power on it is + 5V 0.55 a.

  Im stuck, what do I do?

  Hello

  > told me that any HARD drive would work as well
  It is not quite correct! There are material limitations.

  I discovered that the phone supports 20 GB; 30 GB; 40 GB and possibly a 60 GB HARD drive.
  I m not 100% sure of more HARD drive sizes due to the limitation of the BIOS.
  You should know that not all HARD drive sizes are recognized by the BIOS.

  Further, you should take a look at the supported interface.
  The laptop supports an Enhanced IDE (ATA-5) interface and that's why you should buy a HARD drive that require this kind of hardware specification.

• Satellite Pro A200-1 mn has sata controller OK needed for xp install

  Hello

  I thought that I had the correct file for my installation of xp on my floppy drive but windows setup cannot yet see my hard drive

  I do not have the recovery media so this problem

  Satellite Pro A200-1 mn
  PSAE4E-01R00WEN

  I like 82801 sata ahci controller and ich8m storage controller 2850

  It does not however love them, can anyone help?

  Hello

  In the Bios, you can set a, compatible, mode and try to install xp, then. Then, you can try reinstalling the sata drivers in win xp environment.

• Cannot install the Modem Satellite Pro A200 XP driver

  I'm a local network for Newbold College administrator. New mobile A200 and we need XP Pro on some of them. I tried to install the modem driver as one of the last drivers downloaded from the website of European support. I also tried the Canadian site as well.

  The driver installation program does not appear to do anything. I tried to manually install the driver for a Windows modem Agse/Toshiba software modem, but I have com port problems and I can not quire of the modem.

  Can someone help me please!

  Hello

  What to say; I checked the driver Toshiba Europe page and found all the drivers XP necessary and important for the Satellite Pro A200.

  Please note that the European driver Toshiba page provides drivers XP 3 different satellite Pro A200 series! There are PSAE1, PSAE4 and PSAE7 series.
  Please choose the right!

  In addition, you will find a txt file of installation instruction on the page of Tosh.
  In this file, you will find a good and important driver installation order! Please follow these steps!

  I put t know exactly why you get the modem com port problems but I guess a new installation of XP and the driver should fix this strange problem.

  Good luck

• Installation of Windows XP does not see on Satellite Pro P200 HARD drive

  I just bought a Satellite Pro P200 and I want to install windows XP.

  The problem is the windows installation sayis qhen that there is no hard drive detected.

  The laptop has two HD 200 GB each.

  Can someone help me?

  Thank you

  Hello

  You must first install the Intel Matrix Storage Manager before you continue the installation of XP.
  It s a same as RAID driver installation procedure
  You need to press F6 during installation to include the necessary files of the Intel Matrix Storage Manager

  I found this on the page of Intel:
  http://Downloadcenter.Intel.com/Filter_Results.aspx?strTypes=all&ProductID=2101&OS FullName = Windows * + XP + Professional & lang = eng & strOSs = 44 & submit = Go %21

  Good luck and thanks for posting the results

• Satellite Pro A100 - HARD drive upgrade

  Hi, I have a Satellite Pro A100 with a FUJITSU MHV206OBH HD, he has been faithful and worked for at least three consecutive years, now my HD is filled with data from software etc. etc. I just changed the memory and upgraded to 2 Gygs and really the A100 is now as fast as my Dell XPS. I love my Satellite and want to install a new larger drive,
  Has anyone in the forum upgraded to a larger HD, advice, any recommendation of HD, where can I find the service manual for this.

  Best regards

  Thor Hedderich

  Hello

  In General, all satellites/Satellite Pro should have SATA hard drives and upgrade is not problematic. You can do this alone.
  If your laptop's 60 GB HARD drive only you can improve even with 120 GB or 160 GB.
  These hard drives are so cheap.

  Is that enough for you?
  Replacement is easy to do and you don't need manuals.

  The low side is set with a cover of HARD drive screw. On the disc lid HARD is placed also for computer laptop (one of the 4).
  -Remove the HARD drive cover
  -Remove the HARD drive pack by pulling on the cushion of the battery, following the direction of the arrows
  -Place the pack HARD drive on a flat surface (such as a desk) and remove the two cushions

  I guess you know now how to put a new.

• Satellite Pro A60 - HARD drive not detected by BIOS

  Hi all!
  I received a Pro (PSA65E) Satellite A60 for free... because it has a bug! But I want to fix it and use it.
  Problem is that the HARD drive is not recognized by the BIOS. Strange enough, it is possible to format during the initial phase of an installation of the OS from scratch (I tried with Win XP and Win 2000), but facilities do not proceed any further because it won't start HD. If I try to install a time shild, he can't find some data already present in the HD and gives warnongs... which means that it is also possible to write to the disk.
  The BIOS screen shows: no drive.
  CD-ROM drive is OK, shown as secondary.
  I also look in the forums to nothing does not.
  Actions taken so far:
  * flashed the BIOS, now at version 1.90
  * Replaced the original HD (Toshiba, 40 GB) known to be good, by another more small (Toshiba, 30 GB)
  * Tried to remove the drive CD and checked BIOS recognizes, it has been removed and recognized it even when delivered. The same manoeuvre with the HD does not change the BIOS screen: he says still 'no drive '.
  * Tried with the BACK of Partition Magic version: it says "no disk found. Same thing with the backup came with the PC disks.
  Tried other stuff found in Fora them: remove all the power sorce, let the PC for a few minutes... open and checked for visible problems in the area of the disc HARD and so on.
  Any suggestion would be appreciated!

  Thank you
  aurcri

  Have you used the default settings for the BIOS settings?

• Satellite Pro M40: HARD drive replacement

  Hello

  I recently bought a new hard drive for my satellite pro m40 like my old man, we broke up I put the hard drive in the machine properly and it's the same speed, size etc, but the laptop does not recognize it at all.

  I tried to swap back to the old hard drive and he acknowledges, the news is a number of slightly different model a new the original is mk6022gax and original is mk6026gax. the two 60 GB, I am told. Please help me if you can.

  Thank you.

  Hi Ollie,

  The only reason I can think is that the new hard drive is may not be configured correctly for your laptop. I know that some Toshiba drives are supplied as C - salt rather than the more usual master configuration, but these are normally reported as such on the nameplate.

  It is possible to change the setting of the drive (see the following URL for details) http://support.dell.com/support/edocs/storage/p69067/jumpers.htm

  It is also possible that the new disk is defective (unlikely but it should be considered).

  Kind regards

• On Satellite Pro 6100 HARD drive password

  Hello

  I have an almost dead Satellite Pro 6100, I was almost back on its feet, but we wonder a HHD password on start up. Apparently, one of the portable computers security features is "Password HARD drive on request".

  There were ideas! Cannot ask the laptop I can't!

  When the HARD drive password is set, and you start the laptop you must enter this password. Otherwise the drive will not spin.
  The functionality of the HARD drive password is to secure the data on the disc. If you do not have the password: no chance to use the HARD drive.
  So if you can't enter or ask for the password you must swap the HARD drive.

  Buy the way it is always strange if someone "owns" a laptop and one does not know the passwords! If you bought the computer laptop may it is stolen...

• Satellite Pro U200 - hard drive upgrade

  Hello

  I have a Satellite Pro U200-128 and you want to upgrade the hard drive. I can't find detailed specifications to show me the compatibility, drive type and therefore the size of a disc that I can buy.
  I think that its SATA, but there is a lot of info on SATAII, not sure if it will work in my model?

  Any help appreciated

  Hi ollieg72,

  You re right. Satellite Pro U200 already uses the HARD drive with SATA interface if you need a HARD SATA 2.5. In addition, it should be possible to use every ability because on SATA interface, there is no capacity limit.

  Anyway, SATAII HDD is also working because they are compatible to the old interface of SATA1 downgrade. So it makes no difference if the HDD is SATAII interface or not. ;)

• Need to drive caddy HARD and coverage for Satellite Pro 6100 HARD drive

  Does anyone know the part numbers or to get a hard drive caddy and the Satellite Pro 6100 Series hard drive
  Thank you

  What caddy did you? Internal an external 2.5 USB caddy for a HARD drive or the case?
  I think that if you need a domestic framework for laptop you should order it since the maintainer authorized Toshiba in your country.
  I think that guys should be able to order something like this directly from the Toshiba store

• Replacement to the satellite Pro A10 hard drive

  By turning on the laptop I get IDE #0 ERROR Inter (R) Boot Agent FE v4.1.09 etc. Insert system disk in drive. I do and nothing happens.

  Is this to say that the hard drive is spent? If yes where can I get a replacement from? How I don't know what to buy?

  Hi Dean

  Well, the ERROR IDE #0 means that the BIOS cannot recognize devices connected to the IDE #0. Above all it s a HARD drive.
  So I presume that you HARD drive is dead and must be replaced.

  You can buy a compatible HARD drive from a computer or a laptop computer reseller. Of course, you can contact your local Toshiba ASP (authorized service provider) and order this HARD drive too.

  Your Pro A10 appears to bear an IDE hard drives.
  Therefore, you might choose an IDE HDD with 20, 30 GB or 40 GB

  I posted only these three sizes because I'm not sure about bigger hard drives.
  Perhaps a larger HARD drive is not recognized by the BIOS.

  See you soon

• Main hard drive has lost recently. (2 mo out of warranty)

  Lost the main hard drive on p6717c running Win 7 Home premium 32-bit.  Warrentey expired on 19/02/12.  Hard disk was sent to see if they can recover more than 50,000 family photos.  they don't know if they can recover the op system.  If recovery is possible, they are to be put to the new hard disk 2T, but may not have Win 7 op system.  How to make system replacement op?  (Apart from buying a new).

  tarpicker wrote... How to make system replacement op?  (Apart from buying a new).

  In addition to the purchase of a copy of the retail of Windows 7, you can buy a set of HP recovery disks. Information on the command of the regular series of drives can be found HERE. According to the specifications of your HP p6717c desktop, the system initially provided with Windows 7 64 bit.

  Frank

   

• Satellite Pro 4360 - HARD drive replacement

  I have a SP4360 with v.nosey 12 GB of HARD drive I want to replace. In the technical specifications for the 4360 it is listed as EIDE. I looked on EBuyer and there are a couple of replacement if necessary:
  Western Digital Scorpio 40 GB EIDE LP 2.5 5400 RPM 8 MB Cache (WD400VE)
  Scorpio 40 GB EIDE LP 2.5 5400 RPM 2 MB Ns (WD400UE)
  The WD400VE is listed as ATA-100 connector type, but the WD400UE is listed as EIDE. These use the same connector and either will work in my SP4360?

  Hello

  If you want to be 100% sure contact Toshiba service partner. I'm not 100% sure but I think he should avoid any problems. The only question is to know if the laptop can manage with whole HARD drive capacity.

  Good bye

• 160 GB hard drive has LOST 30 GB in an hour by himself. HELP PLEEEEASE