"pointing to the file" tool does not work

Similar Questions

• "The cutting tool does not work on your computer right now. Restart etc. "comes when I select the Snipping Tool icon.

  The error message "the snipping tool does not work on your computer right now. Restart etc. "comes when I select the Snipping Tool icon.  However if I select snipping tool in the menu start nothing happens at all.

  Original legislative:

  M.

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

  -

  I hope this helps. Good luck.

• to refine my question. The Lasso tool does not work.  When I select the content aware lasso shrinks and nothing changes.  Help please.

  to refine my question. The Lasso tool does not work.  When I select the content aware lasso shrinks and nothing changes.  Help please.

  A simple reset will often be the case if a tool becomes awkward. Go to this link, then select the lasso tool:

  Difficulty of tool

• The cutting tool does not work after windows updates.

  I read answers to similar questions about the failure of the cutting tool.  I use the tool cutting regularly and I think it's a fantastic tool in Windows. I have Vista Ultimate and all my windows updates have managed: none were not installed correctly, and I did not install new programs or hardware.  It seems that Microsoft knows the snipping tool does not - why can't they simply provide an update patch to correct the problem, rather than make us do all the work.  I don't have to go through hoops of restorations etc to get something it seems work was broken by updates.  I'm about to go to a Mac.

  It worked for me! Thank you!

• The text tool does not work in Photoshop CC

  When I try to use the text tool, that it does nothing when I type even if the font size is 12, and the color is black on a white background, and then when I try to get out of the text tool a progress bar will appear that says "Record type" and the progress bar does not until 15 minutes later. After that, no text shows. I tried to move the text tool above where I have used it previously, and the cursor doesn't detect any text in the box.

  This is a brand new installation of photoshop, I did not any customizations to it.

  My operating system is a Mac with OS X 10.7.5.

  I already tried things:

  …………………………………………….

  -J' tried to uninstall and reinstall Photoshop CC and creative cloud.

  -J' tried to change the font size, color. Each took 15 minutes due to the type of rendering progress bar.

  -J' tried to change major fonts such as Verdana, Arial, etc..

  -J' did the steps on this page to troubleshoot fonts:

  http://helpx.Adobe.com/Photoshop/KB/troubleshoot-fonts-Photoshop-CS5.html

  It was the procedure on this page:

  S ' ensure that Photoshop is the most recent version.

  -Clear overview of the policies.

  -Delete the specified fonts known to cause trouble.

  -Clear cache fonts photoshop

  -Clear cache OS police

  -Try to remove everything except a font on the Mac and keep the rest in another folder.

  -Use their fonts test script.

  Now the police only that I have in my folder of Mac fonts is Arial.ttf

  I did all these things, and the problem still occurs. All other tools works fine for me! I need to use photoshop for graphics work, I need to do. Any help would be greatly appreciated!

  I found the problem! When I pressed 'File' > 'New' to make a new document, I typed in the 1000, but I'm used to the measures in pixels, not inches. The new facility was in inches lol. The Web was gigantic! Once I put it to a smaller size that the text tool worked great! I feel stupid, I over looked that.

• Assignment of attributes of the shape (contour/background) to existing shape via the screening tool does not work...

  Hey guys,.

  in earlier Versions of Photoshop CC I could choose an existing shape, then assign attributes by using the drop-down list of the screening of the tool (i.e. of the pen tool). My workflow has been something like this:

  -Initially affect the attributes via the drop down menus of contour/background while the pen tool is selected.

  -Create a "Preset" tool contour/background settings.

  -Assign these settings to various forms via the Preset drop-down list.

  My habit of presets custom newly created "work more, it still works for the"integrated"Presets, though (i.e. peanut Dash preset the tool pen).

  Anyone having the same problem / found a solution?

  TIA!

  SEB

  In fact, one click worked, there was just a delay. My drop down remains open. Have you tried to reset your preferences - first of the tool, and then for the PS, if this does not work?

• The eyedropper tool does not work in the levels, curves adjustments

  I have installed PS CS 5 extended on a new computer with Vista Home Premium. Any other version of Photoshop has already been installed on this system.

  The problem I encounter is the eyedropper tools in the two curves and levels adjustment does not work. The real sliders seem to work fine, but clicking on a dropper and then a spot on the photo has no effect at all on the image.

  I encounter this problem when I run the 64 bit version of the program. It occurs only in the standard version of CS5, I need to continue to use because of plugin incompatibility with the 64-bit version.

  I checked what is obvious and ensure that the 'Preview' is checked, and that I have the correct layer selected!  

  
  For any help or suggestion would be greatly appreciated!

  I'm sorry to hear that none of those things cleaned up the problem for you.  I am almost sure this is a video driver issue, and it is unfortunate that the latest version of the driver does not solve it.  As a general statement: the Intel GPU and OpenGL drivers are known to be problematic with Photoshop.  A good number of people with Intel GPU report a problem on this forum.

  Just to be absolutely sure...  You have disabled the drawing OpenGL, closed and reopened in Photoshop, and the problem remains the same?  Have you tried both ways after the release of the pilot?  Make sure and close and reopen Photoshop after the change is made.

  There is another thing you could try...  Clear preferences for Photoshop 32-bit.  Press and hold Ctrl - Shift - Alt immediately after you start Photoshop of its menu item or a shortcut.  If you're fast enough, you will be asked if you want to restore all of the default preferences.

  -Christmas

• Why the text tool does not work?

  whenever I choose the text tool that doesn't work. It allows me to create the bar, but the curosor doesn't even blink. I type and its Blanck. I hit accept the test I typed shows on the layer, but not on the screen, I need help. I've even updated, reinstalled. I need help I am ready to throw my laptop. Please someone

  Is this a new problem with an old facility?

  Or a new facility and the Type of tool has never worked?

  What is the size of the image in pixels and resolution?  Something that sometimes happens is that people get the wrong units and I think they are pixel setting when it is in fact centimeters.  If you have a low resolution game, like the default 72 dpi, which can cause the tiny text, it might as well be invisible.  This is particularly problematic when the Type is set on Points.  To test simply do a new document with reasonable proportions.  that is 1000 x 1000 pixels, 300 dpi

  Another test is to select the text layer and use free transform, or zoom so you can see if you have a small bounding box.

  If this isn't the question and the text color is not the same as the background, then...

  First step is to reset the preferences.  (The relocation does not overwrite the preferences file).

  Also try resetting subject tools.

  Then uninstall Photoshop and use the cleaning tool before reinstalling.

• Why the BONES tool does not work on my symbol?

  I drew this caterpillar in Flash and can not get the bone tool to work so I can animate... I tried to have the parts of the layers separate, all together on one and grouped, and nothing works! Can someone please tell me what I'm doing wrong?

  http://www.filedropper.com/Caterpillar

  Double click on your graph of caterpillar to the library (to change the symbol) > convert each group (head, parts of the body) in a movieclip > use the BONE tool.

• 'For' the command line in the file Tab does not work in Task Scheduler

  I am able to do my work of script .bat with 'echo' and 'set' command in the file lines beats using raykor suggestion to put the .bat file in program/script and put the path in the field "start in". However, 'for' command line stops all other lines in order to run.  Please see the below script. Please help how to do the command line 'for' to work. I need to add the date and time for the name of the file/folder to keep track of a copy of the file on each day. This script works perfectly when I run a line by line at a time on the CMD command prompt. He copied the files and folders and gave me the date and time and concatenated to the name of the file/folder. The first 2 lines do not work. If I delete the first 2 lines, it works fine.

  for /f "Tokens = 1, 2, 3, 4 * Delims = /" %i IN ('date/t'), set dt = %i %k %%j
  for /f "Tokens = 1, 2 *" %i in (' / time t ") set tm = - %i %j
  Set tm = % tm: =-%
  set the TNT = % dt % % tm
  echo copy backup set: % of DTT.
  ECHO please wait...
  Robocopy s:\data2 d:\testBackup\data2 /e /mir /np /tee /log:"c:\users\myusername\desktop\backup_log.txt.
  echo of finishing.

  Hello

  I apologize for the delay in responding to this post.

  The query is better suited in the following TechNet Forum, asking to view the query to get a solution to this problem.

  http://social.technet.Microsoft.com/forums/en-us/home?Forum=iTCG

• The eyedropper tool does not work with a hue saturation adjustment layer

  I use PS CC 2014, and the problem I have is that when I have to use the eyedropper tool to adjust the range of colors affected by an adjustment layer Hue/Saturation, rather than selecting the color in the Properties window for the adjustment layer, use the eyedropper closed the window properties and change the foreground color in my palette.

  Here's the real hitch... the same thing happened to me at the school last night where a) the Mac is older and CS6 b) is always used.

  It's something with my user settings, to be sure, because the teacher logged into his account on the Mac I was using in the class test, and it worked for him. We have logged on my account and it still does work for mine.

  Any ideas?

  Thanks for the ideas.

  RP

  Looks like the kind of question reset preferences will probably correct.

  Press and hold Shift Cmd opt immediately after starting Photoshop

• The camera tool does not work properly

  Hello, I have a question about the camera tool. I just started working with Ae and I'm confused.

  I want to Textanimation. The first scene works well, I facilitated the movement of the camera and set all keyframes.

  But now I can't move the camera. Any tool of camera I use, the image remains the same?

  I guess it's just a small mistake, a checkbox may be, but I can not understand how to fix it!

  So, can you help me please?

  You have no 3D under the CCI layer. The end of 2 seconds 3D layers... None of the 3D, camera layers have no effect.

• Why the bucket tool does not work?

  I have several drawings that I did in flash and I can't fill any of them. IV done all the drawings with the pen tool and they are all sealed, but the tool won't let me use it.

  Although as a point sometimes it SEEMS closed, but it is not yet the extent of the Flash is concerened. In any case, glad you figured it out! To get rid of the object box, select the part of the drawing and press CTRL-B, and it will flatten the drawing to be all one piece.

• Help! The Liquify tool does not work as expected in Photoshop CC.

  I used CS5 for a few years and used the Liquify tool very frequently without problem. I joined Photoshop CC 2 weeks and have been having this problem with the tool:

  When I use the bloat, pinching or rebuild, it seems not too do its function and completely distorts the picture, even with a simple click. If I move the cursor even by a millimeter, the entire image is sucked into a white circle with the size of the brush. See examples (I used the bloat for these):

  Single click with brush density 50:

  

  Single click with a density of 0:

  

  Proposed by a tiny little slider to the right:

  

  I tried to adjust the density of the brush, the brush rate. Photoshop I rebooted several times. I searched online for a solution and tried the 'Kelby trick' by pressing SHIFT while starting up of Photoshop. None of these work. I had only CC for two weeks and have not changed any settings (except the States history increased to 99) and have not installed plug-ins or anything.

  Any ideas how to solve this problem? It was one of my favorite tools!

  Hello, if you click ALT + liquefy in the menu filter, it will run in mode CPU, so you can check if get it different behaviors.

• The cutting tool does not work

  I get an error message when I try to launch it. I tried to restart my computer because it suggests, but it didn't fix it.

  Hello

  1. What is the error message you get?
  2. what changes have been made to your computer before the problem?

  Use the System File Checker (SFC.exe) tool to determine which file is causing the problem and then replace the file. The tool (SFC.exe) System File Checker scans missing or system corrupted files and repairs them.