The camera tool does not work properly

Similar Questions

• The Cam Driver does not work properly

  Hello my product no model is hp 15-r015tu and I download all drivers, but there are still my cam does not

  When the youcam driver install in my lappy there give me something error.then missing in driver pack

  My OS is win-7 ultimate 64-bit

  Hello @JACK_0301 ,

  Welcome to the HP Forums!

  I understand that the webcam on your HP Pavilion 15 laptop does not work.

  Please make sure that you use the following download to install the CyberLink YouCam software for your notebook: Cyberlink YouCam software.

  Can you please tell me if there is a version of the currently installed YouCam software and the webcam works in this software?

  Also, check in Device Manager for devices of imagery for any conflict with the webcam. It should display with no X,!, or? symbols on the appliance.

  You can also restore the laptop to before the show began. You can do this by tapping F11, while the laptop turns on to access the HP Recovery Manager and selecting the restore option.

  Let me know if it works!

• the BACKSPACE key does not work properly and if I want to enter the same letter twice it takes time between them

  the BACKSPACE key does not work properly and when I want to type a leter twice I have white some time between them

  Hello

  In what program?

  Don

• "The cutting tool does not work on your computer right now. Restart etc. "comes when I select the Snipping Tool icon.

  The error message "the snipping tool does not work on your computer right now. Restart etc. "comes when I select the Snipping Tool icon.  However if I select snipping tool in the menu start nothing happens at all.

  Original legislative:

  M.

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

  -

  I hope this helps. Good luck.

• to refine my question. The Lasso tool does not work.  When I select the content aware lasso shrinks and nothing changes.  Help please.

  to refine my question. The Lasso tool does not work.  When I select the content aware lasso shrinks and nothing changes.  Help please.

  A simple reset will often be the case if a tool becomes awkward. Go to this link, then select the lasso tool:

  Difficulty of tool

• Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

  Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

  Any ideas out there?
  I know the pro 2 surface is not the real model, but at least it should work fine.

  arwinq,

  You can see the system requirements, including the maps here.

  https://helpx.Adobe.com/Illustrator/system-requirements.html

  but I fear that you may be taken in this GPU issue described by butz in post #13 here:

  https://forums.Adobe.com/message/7773402#7773402

  You can try to switch between GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.

• Satellite A10 S203: the CPU fan does not work properly?

  I have toshiba satellite a10 s203 and the cpu fan does not work correctly. What can I do about it?

  Hi SACRIFICE them.

  Here are some possible solutions to this problem of fan.

  1. When you have installed a base installation of MS (not the Toshiba Recovery CD) you need to install the Toshiba Power Saver and others utilities from the CD tools & utilities. The energy saver is responsible for the control of the fan.

  2. If you have a recovery based OS, you can update the energy saver of http://eu.computers.toshiba-europe.com site Web Toshiba under Support & Downloads - Download Driver

  If please check this and an answer then follow the next step!

  CAMPino

• The cutting tool does not work after windows updates.

  I read answers to similar questions about the failure of the cutting tool.  I use the tool cutting regularly and I think it's a fantastic tool in Windows. I have Vista Ultimate and all my windows updates have managed: none were not installed correctly, and I did not install new programs or hardware.  It seems that Microsoft knows the snipping tool does not - why can't they simply provide an update patch to correct the problem, rather than make us do all the work.  I don't have to go through hoops of restorations etc to get something it seems work was broken by updates.  I'm about to go to a Mac.

  It worked for me! Thank you!

• The Task Manager does not work properly

  My admin task manager does not work properly... its not showing menu bars and process... what should I do now?

  Hello

  The Task Manager is running in tiny footprint mode - double-click on the border to return to full mode.

  Tabs in the Manager of tasks and Menu Bar missing or disappear
  http://www.mydigitallife.info/2009/01/17/Task-Manager-tabs-and-menu-bar-missing-or-disappear/

  Small footprint Mode
  http://www.howtogeek.com/wiki/Task_Manager#Tiny_Footprint_Mode

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• "pointing to the file" tool does not work

  I use Dreamweaver CS4 on a Mac under OS X 10.5.6. The tool 'to the file' (the icon that looks like a target in the properties panel) does not work. When I click on & made slide on it nothing happens. Any ideas on how I can get it to work?

  dmmontana wrote:

  I use Dreamweaver CS4 on a Mac under OS X 10.5.6. The tool 'to the file' (the icon that looks like a target in the properties panel) does not work.

  There is a known issue point to the file on Mac if you use a big screen (I think only 20 ' or more) or on a Setup dual monitor. It works very well on smaller screens.

• Compact Z5 camera away from the lock screen and the camera button does not work as well

  Don't know what that happen but the icon of the camera on the lock screen suddenly disappeared and camera quick launch button does not work as well. Can I still use the camera from apps however.

  Problem solved through launch quick adjustment of the device. However, didn't turn off in the first place. Hoping that this is just a small problem

• Assignment of attributes of the shape (contour/background) to existing shape via the screening tool does not work...

  Hey guys,.

  in earlier Versions of Photoshop CC I could choose an existing shape, then assign attributes by using the drop-down list of the screening of the tool (i.e. of the pen tool). My workflow has been something like this:

  -Initially affect the attributes via the drop down menus of contour/background while the pen tool is selected.

  -Create a "Preset" tool contour/background settings.

  -Assign these settings to various forms via the Preset drop-down list.

  My habit of presets custom newly created "work more, it still works for the"integrated"Presets, though (i.e. peanut Dash preset the tool pen).

  Anyone having the same problem / found a solution?

  TIA!

  SEB

  In fact, one click worked, there was just a delay. My drop down remains open. Have you tried to reset your preferences - first of the tool, and then for the PS, if this does not work?

• The text tool does not work in Photoshop CC

  When I try to use the text tool, that it does nothing when I type even if the font size is 12, and the color is black on a white background, and then when I try to get out of the text tool a progress bar will appear that says "Record type" and the progress bar does not until 15 minutes later. After that, no text shows. I tried to move the text tool above where I have used it previously, and the cursor doesn't detect any text in the box.

  This is a brand new installation of photoshop, I did not any customizations to it.

  My operating system is a Mac with OS X 10.7.5.

  I already tried things:

  …………………………………………….

  -J' tried to uninstall and reinstall Photoshop CC and creative cloud.

  -J' tried to change the font size, color. Each took 15 minutes due to the type of rendering progress bar.

  -J' tried to change major fonts such as Verdana, Arial, etc..

  -J' did the steps on this page to troubleshoot fonts:

  http://helpx.Adobe.com/Photoshop/KB/troubleshoot-fonts-Photoshop-CS5.html

  It was the procedure on this page:

  S ' ensure that Photoshop is the most recent version.

  -Clear overview of the policies.

  -Delete the specified fonts known to cause trouble.

  -Clear cache fonts photoshop

  -Clear cache OS police

  -Try to remove everything except a font on the Mac and keep the rest in another folder.

  -Use their fonts test script.

  Now the police only that I have in my folder of Mac fonts is Arial.ttf

  I did all these things, and the problem still occurs. All other tools works fine for me! I need to use photoshop for graphics work, I need to do. Any help would be greatly appreciated!

  I found the problem! When I pressed 'File' > 'New' to make a new document, I typed in the 1000, but I'm used to the measures in pixels, not inches. The new facility was in inches lol. The Web was gigantic! Once I put it to a smaller size that the text tool worked great! I feel stupid, I over looked that.

• The eyedropper tool does not work in the levels, curves adjustments

  I have installed PS CS 5 extended on a new computer with Vista Home Premium. Any other version of Photoshop has already been installed on this system.

  The problem I encounter is the eyedropper tools in the two curves and levels adjustment does not work. The real sliders seem to work fine, but clicking on a dropper and then a spot on the photo has no effect at all on the image.

  I encounter this problem when I run the 64 bit version of the program. It occurs only in the standard version of CS5, I need to continue to use because of plugin incompatibility with the 64-bit version.

  I checked what is obvious and ensure that the 'Preview' is checked, and that I have the correct layer selected!  

  
  For any help or suggestion would be greatly appreciated!

  I'm sorry to hear that none of those things cleaned up the problem for you.  I am almost sure this is a video driver issue, and it is unfortunate that the latest version of the driver does not solve it.  As a general statement: the Intel GPU and OpenGL drivers are known to be problematic with Photoshop.  A good number of people with Intel GPU report a problem on this forum.

  Just to be absolutely sure...  You have disabled the drawing OpenGL, closed and reopened in Photoshop, and the problem remains the same?  Have you tried both ways after the release of the pilot?  Make sure and close and reopen Photoshop after the change is made.

  There is another thing you could try...  Clear preferences for Photoshop 32-bit.  Press and hold Ctrl - Shift - Alt immediately after you start Photoshop of its menu item or a shortcut.  If you're fast enough, you will be asked if you want to restore all of the default preferences.

  -Christmas

• My iphone camera 5 does not work properly. I'm unable to upload photos on social media or save the images that I click on them.

  IF I take photos from the camera application the picturs are not getting saved in the camera or anywhere else.

  IF I'm ready to download some pictures on social media photos are not selected.

  IF I am trying to record a voice message on a social media voice message is sent successfully. But it records all sounds in there.

  I would be very grateful if you kindly please look into the matter.

  Anyone visiting, please help me out, give me your suggestions.