Police in a new layer with the background color
Hello.
When I'm doing a new layer on an experience that is defined through the ALT + CTRL + P (imitation of colored paper), the new layer appears dark. Instead of orange color, the text color is dark. Be it on a new layer, or on the same.
What's wrong?
Do not use the simulation. Just make a gray filled rectangle and define your type above it.
In Illustrator, there is no notion of background colors as in publishers raster graphics.
Tags: Illustrator
Similar Questions
-
Merge a layer with the background
Is it possible to merge a layer with the background? I mean, suppose that the background does not yet exist and I have a series of layers on top of this transparent background. How can I go on the fusion of one or more of these layers with the background without flatten the whole image?
to convert a normal layer into a background layer, you will need to select and go to the layer-> New-> layer bottom. As far as I know, this is the only place where you can do. If you want to do a bottom layer of multiple layers, you must select the layer and go first to layer-> layer blending to merge the layers into a single layer
-
Difficult to scroll with the background color of table cell
When I changed the background color of cell, the table has become difficult to achieve.
And I can't finish change the cell background color, it takes forever.
Anyone encountered this problem before?
LabVIEW 2011 on WinXP.
Hello Zou,.
The problem is not with "background color of the cell.
But the problem is with the "size of the Table!
When the size of your table is huge, the windows + chart LabVIEW take longer to scroll.
Attached VI may help you to experience the same. Change the size of the table and the roll of experience.
Solution: -.
1 initialize the Table for that size, if the size of your table is small.
2. use a table (UI) + Scroll Bar (Manual from Numeric range) + internal buffer (block diagram), for the size of the huge table
Kind regards
Yogesh Redemptor
-
Problem with the background color of a disabled control
I have a few controls on the top a box colored and elevated. When I disable and gray (round button) control an adverse change occurs in the background color of the control-it gets surrounded by a grey version of the color of the raised area. I would like that the bottom remains the same as it does on the default gray Panel.
I looked through all of the properties, but can't seem to change this behavior.
Thanks for the link, looks that it may have been fixed now for controls tab (?) but no decorations. The solution is to use a tab control to single page with no tab, rather than a raised area. The difference in behavior can be seen in the joint, if we look carefully it is always a small amount of color change surrounding control disabled on the tab.
-
How to fill the entire screen with the background color?
It doesn't seem like it should be difficult, but of course, it seems to be. I put the background color on the
my page, but it only fills half the screen in the Simulator. It's a small page.OK, so I went to some styles. I updated the style of the body height: 100%; min-size: 100%. That no longer works. Then I added a
that enveloped the rest of the content on my page and set the style to the same height: 100%; min-size: 100%. Still nothing.What gives? Of course, the Simulator seems all ignore them.
I use the VS plugin and simulate with the simulator of the storm.
Thank you
Bill
in the onload of the body, you can also do this line of code:
document.body.style.height = screen.height + 'px';
-
Hi, I work with a project that should highlight some Word or phrases with different colors. I use the background color option to do this, but when you make a pdf file, disappearance of the color. How to make this work? FM10 unstructured.
JW
Unfortunately, this does not work in FM10 (or 11), using the CMYK settings - you have to use RGB and convert colors in the PDF file (with tools like PitstopPro of the Enfocus) or during the stage of postscript with a tool like PubliPDF (see: Grafikhuset Publi PDF for GPL license freebie; details on usage and other information are available at) (: Welcome to Grafikhuset published PDF ).
You can also try using the joboptions CMYK in RGB mode setting to see if you get an acceptable conversion (be aware that graphics and images in documents may be affected). You must also set GetLibraryColorRGBFromCMYK = None to prevent all doing unnecessary conversions color FM.
The background color feature works correctly from only FM12 CMYK mode.
-
Word 2007 to PDF with the background color
Hello
We have a Word 2007 document that has a blue background and white fonts.
When we print in PDF format, we can see only the blue background and fonts are NOT visible
Any ideas?
Thank you!!!
Well, now I'm confused
. Following your directions:
--| Opens a new DOCX with Word 2007 and saved
--| then, from the Page Layout Ribbon; Page color > dark blue theme of Coler (top row, 4th from left)
--| entered the text (with creativity, I entered "this page has a blue background)
This text was the default font color (black)
--| selected in the text string, right-click for the context menu, 'Police' selected
--| in the dialog box font, use the "Font color" dropdown to change font color
--| chose "white" (top left of selection among the colors of theme)
--| the Acrobat Ribbon, open preferences
--| used my default configuration:
--| Settings tab: all selected except - create PDF/A-1a 2005 compatible file & join a source file
--| Security tab: failure to add-in (nothing selected)
--| Tab Word: first choice not selected; two other selected
--| Tab bookmarks: first and third chosen, second not selected
--| Video: as-is with the default selections--| clicked on create PDF & save
--| PDF output: page background is blue dark; font color is white & easily visualized.FWIW-
Used MS Word 2007 (Office Enterprise)
Vista Ultimate
Acrobat 9 Professional Extended (TCS v2)
Output PDF via Adobe PDFMaker (Ribbon "Acrobat")Time for a glass of wine left over from yesterday?
Be well...
-
Newbie - having trouble with the background color when you open new document
Hey everybody and thanks for the help in advance. New to the Forum and have not been able to find the answer online. Everytime I open Photoshop (using Adobe Creative Cloud) I set my size, my background to white, etc.. The document opens always look like this: http://screencast.com/t/BzCYc4akl
Almost as if it is transparent, but I have not selected. Can someone help here? Thank you!
Hello
Looks like that the gates are activated.
If in photoshop, you go to view > Show and click on the word grid, does make a difference?
-
Problem with the background color setting
Hello
I have the following code
public class Loading_Menu extends MainScreen { public Loading_Menu() { MainScreen newScreen = new MainScreen(Manager.NO_VERTICAL_SCROLL|Manager.NO_VERTICAL_SCROLLBAR); VerticalFieldManager backgroundManager = new VerticalFieldManager(Manager.USE_ALL_WIDTH|Manager.USE_ALL_HEIGHT) { protected void paint(Graphics graphics) { graphics.setBackgroundColor(Color.BLACK); graphics.clear(); super.paint(graphics); } }; Bitmap appLogo = Bitmap.getBitmapResource("Breakout_Logo.png"); BitmapField bmf = new BitmapField(appLogo, BitmapField.FOCUSABLE) { protected boolean navigationClick(int status, int time) { Main_Menu myMethod = new Main_Menu(); myMethod.createAndDisplayMainMenu(); close(); return true; } }; int leftMargin = (Display.getWidth() - bmf.getBitmapWidth()) >> 1; int topMargin = (Display.getHeight() - bmf.getBitmapHeight()) >> 1; bmf.setMargin(topMargin, 0, 0, leftMargin); add(bmf); newScreen.add(backgroundManager); } }
My goal is to show the bitmap in the center of the screen and have a black background behind the image. in its current form the image shows in the Center, but the screen remains white. Can someone explain and point out my mistake?
Thank you
Hi Peter,.
no problem, here is how I solved the problem. I just added an override of the method paint and this placed in a vertical field Manager
VerticalFieldManager backgroundManager = new VerticalFieldManager(Manager.USE_ALL_WIDTH|Manager.USE_ALL_HEIGHT|Manager.NO_VERTICAL_SCROLL|Manager.NO_VERTICAL_SCROLLBAR) { protected void paint(Graphics graphics) { graphics.setBackgroundColor(0x0000A2E8); graphics.clear(); super.paint(graphics); } }; LabelField lb = new LabelField("Hello"); backgroundManager.add(lb); add(backgroundManager);
-
Query regarding the change of the background color of an input text
Hello
I want to change the background color of an input text element. When I tried with the background color inline style, he has changed the color of the label instead of changing the background color. Is there a way I could do?
Thanks in advanceHello
Use the contentStyle property (or counting af: inputText::content if you want to change it in one place for all input text fields)
Frank
-
How to get the background color of a layer with AE SDK
Hello
I try to get the background color for my current layer, but I can't seem to find how do.
I don't want background color, background color of the application, but the color that shows through, if I set the alpha of my pixels to 0.
For example, assume that the background of the composition is black, I put a solid top, green then put a picture on top of the solid and apply my pug-in the image.
If I set the alpha to zero in my plug-in, green solid will be displayed.
So I want to be able to know that my background is green.
I tried to use PF_AppGetBgColor(), but which returns the background color of the application, which isn't green in this example.
If you want more details on what I want to do, I plug P1 which affects some 0-alpha pixels. Above it, I apply an another plugin P2 which reveals alpha-0 pixels by mixing with little color.
What is happening now is that the output is color of the original image, mixed with the color of P2 (because only modified P1 alpha pixels).
What I want is to have the color through the transparent pixels of P1 display mixed with the color of P2.
To do this, I would like to be able to set the color of pixels 0-alpha in the color of the background in P1.
Sorry for the question long.
Thanks for your suggestions.
Hello nicolas.
If I understand it, that you try to get the buffer of image layers composited under the layer with your effect.
If that is correct, then I fear that it is almost impossible to do.
When AE makes a composition he doesn't it down. He's trying to do the opposite in fact.
Why? because if at some point, the buffer is completely opaque, then he has no need to make what's below.
further more, checked the diaper changing the rendering order, and many other things affect the rendering of the layers order.
In addition, there is no API to access buffers intermediaries comp. just the end result.
the closest you can get than without turning of the world, is to use AEGP_GetCompBGColor().
that would be useless to you that the image is not composite on that color, unless it is the model being saved to the file.
so why I said 'almost impossible '?
You can transform the world.
You can write a type ECAP 'craftsman '. (look at the example of 'arti')
These plug-ins make comps (instead of the "advanced3D" converter)
a craftsman has results intermediaries comp, because he is the one doing the rendering.
so now you can have your craftsman save the buffer, you need and deliver it to your effect.
I must warn you that this is very very very difficult.
Another possible solution is to create a copy of the model resides in your effect,
erase all the layers that has the image you need and make that reproduces model using AEGP_GetReceiptWorld().
If you use this method, you must supervise the original model and apply changes to the copy.
Yes, it's too difficult to do.
you could make a change in the strategy and apply your effect to an adjustment layer instead.
the entry for the adjustment layer is the buffer underlying layers.
Then, you could get the original sources you want to treat using checked layer params.
the last solution I can think uses the expression of sampleImage() on a hidden parameter.
This will give you any layer's pixel data in the model, but not the composite of the underlying layers.
Maybe if you tried sampling adjustment layers post effects... I don't know. you need to try.
This method is very slow and is also limited to expire, so you can't get a large number of pixels.
the expression simply fails.
I hope that this was not all bad news for you.
Maybe you said more about the plug-in you develop I could come up with a better plan.
:-)
-
My background color changes when I try to apply it. I put the color using the color picker. Then I try to create a new document with the same background color. But that change of a very different color. What I am doing wrong? I've used the previous procedure, several times, without this problem.
The new document has a different color profile. Make sure that they are the same.
The same result of RGB numbers in different colors in different color spaces. Or in other words, the color space defines the specific color produced by a certain set of numbers.
-
I don't know how beginner, you are so I hope that makes sense...
Here's a quick rough pass.
Briefly:
(1) I made a selection of the wall next to the woman, about the same size
(2) CMD - J to make a new layer copied the selection
(3) use the move tool to place the new copy on the woman
(4) edit-> transform-> Perspective to change the perspective of the copied layer so the points align properly (this could use some fixed work)
(5) use an exposure adjustment layer fixed the copy to change the brightness of the top copy (the wall on the right is brighter)
(6) use a mask on the layer of exposure setting with a very broad brush with low flow to create a rough through the copy gradient, so that the light in the dark transition is more natural
(7) clean the edge of the copy using the healing brush and Spot Healing brush
I hope that this help a little, there are obviously other ways you can go about it. I found the books by Martin Evening and Jeff Schewe's photoshop to be very helpful when learning first PS.
Mike
-
action with the new file with the size of the selection
Hello
I try to record an action that takes a copy of the image and creates a new file with the same dimensions. The action record always have the size of the file of the new hardcoded image inside. I tried to put the Preset in the Clipboard, but this is not recorded in the action. It is with the CS3 version.
How can I create a new file that takes into account the size of the image?
Thanks for your help,
Daniel
You can save the menu 'Image-duplicate"to make a copy of the entire image without registration of the size. If the doc doesn't have only one layer, you can also save the context menu in the layer panel to duplicate the layer to a new document. The size is not saved.
-
Convert a normal layer into the background layer
How do I do that? I want the background layer to the background layer, but I can't figure out how to convert. I am under CS3, FYI.
Select the layer you want to convert and go to layer-> New-> layer background
Maybe you are looking for
-
Satellite P200D-128: Toshiba has a Web page for the graphics card drivers?
Hi I want to update the driver for my card graphics ATI Mobility Radeon 2400HD with the updated driver, Toshiba has a Web page for the graphics card drivers? Concerning the best and warmAdrian Wainer
-
continuous recording of samples in file .lvm with data acquisition
Hello I use DAQ to acquire the analog signal and I'm saving samples k 1 .lvm file using file capable of writing with a sampling frequency = 1 k, samples = 1 k in continuous mode. I am able to see the data stored in the .lvm file like this 1 k samples
-
Installation of Windows xp/vista on hard disks blank
I have a dell latitude (e6400 with 2g ram) as the hard drive or the installation is corrupted (probably HD although HD model has a bad reputation). I'm looking into resurrecting it back to use, as its dormant for the last couple years. She will run a
-
the icon on desktop for internet explore has disappeared and I can't go directly to my home page
usually, when I turn on the computer I double click the icon of internet explore and go directly to my home page, icon has disappeared and I can't find a way to recover
-
Problem of Mode full screen with Base of BACK in Windows Vista program
I have a program from base of BACK, but I can't go full-screen with my BACK Basic program. In order to solve my problem quickly.